EliteBook 840: I want to change my 256GB SSD 1 TB

Similar Questions

• EliteBook 840 G3: Install Windows 7 Ent clean install on Elitebook 840 G3 with Samsung NVMe M.2 SSD

  I want to install installation Windows 7 Ent on an Elitebook 840 G3 with Samsung NVMe M.2 SSD drive.

  Should what drivers I integrate into the installation source (Windows 7 Ent)?

  Someone at - it the procedure?

  Hello:

  Please see that this wire...

  http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/installing-Windows-7-x64-Enterprise-EliteBook-840-G3/m-p/5642120#M442523

• HP Elite Book 840 g1: change the RAID on AHCI on Elitebook 840 g 1

  I have an Elite book 840 g1. I'm changing to AHCI RAID and cannot get it done. I tried everything on the web regarding the registry settings and changes to the bios. Nothing has worked. Any suggestions?

  Solution to change RAID AHCI on an HP EliteBook 840g 1

  My EliteBook 840 g 1 does not have a CD/DVD drive, so I put my software available on a USB stick and this worked great.

  1. back up your PC or important documents.

  2 put the software available on CD/DVD or USB depending on one you plan to use.

  3. close all programs and restart your PC.

  -C' is where it gets difficult.

  4. enter in the Bios by pressing the ESC key

  5. make sure you change your boot order / put USB or CD/DVD first in order - depending on what you are going to use

  6. once in the BIOS go to the 'Advanced tab' and then 'Device Configurations '.

  7. go to RAID/AHCI and switch to AHCI

  8 save the settings and exit.

  -C' is where it gets trickier.

  9. THIS CRITICISM IS - after save and exit the BIOS of the PC will start start - don't let it throw - back in the BIOS before it starts

  10. once in the BIOS, go to the boot options and select the option that you put your software available.

  11. now booting from USB or CD/DVD, you have your software available on

  12. your PC will now go through the re-imaging process and when it's done, you'll be in AHCI.

  13. you can check by going to "Device Manager" > double-click on ' controllers IDE ATA/ATAPI "and below you see"Intel 8 Series Chipset Family SATA AHCI Controller '.

  14. He verifies that you are in AHCI

  15 take advantage of the improved performance

  The extent of the change RAID on AHCI by using registry settings I couldn't get it work. I changed the starting value of several channels (msahci, istorA, istorV, etc.) and couldn't make the change happen. From my experience, I had to reimage my PC for that change to AHCI RAID. If someone has a proven solution, changing to AHCI RAID in registry settings without having to do a reimage would be what they please report them.  Thank you and I hope that all this information is useful.

• HP EliteBook 840 G2: How to enable and disable NFC on HP EliteBook 840 G2

  Hello

  1. Please help me how to activate and deactivate the NFC on HP EliteBook 840 G2?

  2. what I have have Bluetooth activated on 930 Lumia and be paired with HP EliteBook 840 G2 if

  I want to send the image of Nokia Lumia 930 file (Windows Phone 8.1) for HP EliteBook 840 G2 with

  Windows 7 Enterprise 64-bit?

  3. is it possible to transfer images between Windows 7 64 bit on HP EliteBook 840 G2 and 8.1 of Windows Phone?

  Thanks a lot for any advice.

  R,

  Marek

  Press the power button and press the ESC key to call the start menu.

  Now, press the F10 key to access the BIOS.

  Click on the tab advanced, as shown in the image below.

  Under the heading device settings, click integrated device options.

  NFC is activated when there is a check mark in the field of NFC and disabled when the tick is removed and the change is saved.

  

• EliteBook 840: F4 key takes computer to lock screen [number of absolute reference in Excel]

  Hi all

  Here's the question I have that I noticed on my laptop Elitebook 840, Windows 7 64-bit business management.

  When I click on F4, it takes the computer to the lock screen. Normally this wouldn't be a problem, but there is a problem, because the F4 is the key in excel which is supposed to provide absolute references to cells or the "$", as many know. It has all the ineffective because now I have to type the $ manually and I do not know why it is like that.

  I already tried the bios for the Fn keys option, but it just made my Fn key wont work at all, so I had to undo this change. I looked in the bios, but could not find anything else specifically associated with the F keys, let me know if I missed something.

  Just knowing this is what happens:

  F4 - any application/program - sends me it to the lock screen

  FN + F4 - give me the prompt to a different display for multiple display configurations configurations - works as expected.

  CTRL + F4 - closed the active window (yes I did completely during this first strike), as expected.

  ALT + F4 - same as ctrl f4, also as expected.

  AFAIK there is no any other combination of F4 there, and I really prefer not having to press something with F4, whenever I make an absolute reference. I also looked in excel, but saw no option.

  Finally, it is a work computer, but I guess that our IT guys do not always use Excel, as he seemed to have little interest to fix the problem, but I don't have the ability to actually download things (like a hotkey regedit) or the software assistant HP, nor I would want to take the risk of malware (from a 3rd party) or addition of bloatware (from HP) on my new work computer.

  Any help that can be offered would be appreciated.

  Respectfully,.

  Michael

  Hi all

  I found a solution, which is probably pretty specific to my business, but in case someone of another company uses HP laptops with the following software, it might be something interesting to look at.

  Our company uses Imprivata Agent as a single sign - on a keeper and there was a glitch or user access issue which eventually cause F4 lock the computer screen. Once my COMPUTER service has been able to reinstall and reconfigure my rights on Imprivata the problem disappeared after a few business days, and F4 is finally working right.

  So if you're having for my specific problem and typical bios option does not work for you, then perhaps check some other incompatible software.

  Respectfully,.

  Michael

• HP EliteBook 840 G3: Why BIOS version 01.07 (sp76235) is pulled? (G3 EliteBook 840)

  Anyone know why the BIOS version 01.07 (sp76235) for EliteBook 840 G3 is taken?

  Link to the BIOS:
  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_167436_1 & swEnvOid = 4054

  The date is 1 January 3000 so he has obvisoly something wrong and HP do not want to install, I have deployed it to a large number of machines and would like to know what kind of questions, it is hoped.

  A new version 01.10 came out with these fixes:

  -Fixes a problem that causes the display to become visually distorted (flicker).
  -Fixes an issue where a system running Windows 7 with active hard drive encryption is unable to power (boot) after the BIOS is updated.
  -Prevents the BIOS downgraded below the 1.09 version.
  
  NOTE: After loading the BIOS version, older versions of BIOS may not be installed.

• HP Elitebook 840: Can how SSD I use to replace my current HARD drive?

  My HARD drive is starting to become a little slow and I want to move to an SSD. I borrowed an empty SSD with a friend to test the speed, but it does not appear in the BIOS. It is a standard Samsung SSD that should work. Is there a problem with my computer or it's compatibility with the SSDbrand or the type problems?

  I am also looking in the upgrade from 8 GB to 16 GB of ram, can someone connect 1 stick of 8 GB of RAM that is compatible with my computer without having to replace the current 8 GB key.

  SSD, I used: Samsung SSD 840 PRO 128 GB (model number: Z-7PD128)

  If you are recognizing my help please consider giving me the 'Thumbs Up' and clicking 'Accept as Solution' if I solved it your problem.

  Hi Devmarti,

  Your hard disk Samsung SSD should work on HP Elitebook 840 G1 as long as he uses the SATA port. You can check the video below to perform the duplication of the OS on your new hard drive before replace you youtube.

  How to set up your SSD

  Step 1: https://www.youtube.com/watch?v=z1GqasEpZ7s

  Step 2: https://www.youtube.com/watch?v=KNJ8b4IeKWE

  How to replace the hard drive: https://www.youtube.com/watch?v=-5ibaLeO4cU

  To upgrade the RAM, you can buy a SDRAM DDR3L, model 1600 MHz.

  I hope this helps. Thank you.

• HP Elitebook 840: Can't see Windows Hello

  I use a HP Elitebook 840 (im not sure if its G1 or G2) and I want to implement Hello windows. My PC doesnet have any fingerprint reader, but it has no built in Web Cam. I tried to reinstall and update the driver for my webcam and have also setup a PIN but I still don't see the Windows Hello option on my sign in the menu options. In my list of driver my webcam is called HP HD Webcam. I want to know how to activate and use Windows Hello.

  -Dark

  Hello

  No, HP HD webcam can not read your eyes and does not support the Hello. You need something like:

  Intel® realsense™ 3d camera (r200)

  More information:

  https://software.Intel.com/en-us/articles/realsense-R200-camera

  Kind regards.

• HP EliteBook 840 G3: Laptop HP 840 G3 have byte and build id

  have byte and build IDs for HP EliteBook 840 G3 to change motherboard

  AVAILABLE: 15WWCSBA601 #SABV (case sensitive) #DABV

  FB: 3X476J6S6b757H7M7Q7W7saBaEapaqauawbPbSbU bhcAcedQ.RD (respect for case-sensitive)

  HP assistance form

• EliteBook 840 g 2: boot usb

  Hi gurus

  (A)

  I would like to make it bootable usb win 7 pro x 64 FIX;

  laptop is not equipped with an optical drive.

  (B)

  I have a windows to go drive hard usb3 workspace to another laptop (win 7 x 64 home prem);

  MBR, NTFS, single partition;

  works when it is running on x 64 pro win8; works by operating on Vista x 86 ATU;

  does NOT (cannot start) on elitebook 840 G2 win 7 x 64 pro;

  thnx in adv

  SPC

  @synpc

  Hey there!

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I understand that you can not boot from USB.

  Try a few steps recommended below.

  A. Click Start in the search box type CMD.

  Right click on command prompt and select run as administrator

  Run diskpart utility by typing diskpart in the command prompt window and press "Enter."

  Find your USB drive disk number by typing disk list. We assume that the USB drive is 1.

  Run the following commands:

  Select disk 1

  clean

  create the primary partition

  Select partition 1

  assets

  format fs = NTFS

  Assign

  output

  Now, we have prepared a USB drive. Let's make it bootable:

  Insert the 32/64-bit installation disk in the Windows 7 DVD drive. Assume that it is D

  Go to D:\boot (cd d:\boot)

  If your USB drive letter is "e" Please run bootsect/nt60 e:

  Copy Windows 7 DVD multimedia content in root USB (etc. do not put in any folder) folder

  You are now ready to install Windows 7 from a USB key!

  B. you said that you are unable to boot from a flash drive on 840 G2.

  Turn on your computer, keep tapping key F10.

  You will start in the BIOS change the inheritance of secure boot startup option.

  Save the changes and exit the BIOS.

  You should be able to boot from the flash player now.

  Let me know how it goes!

  Have a great day!

• EliteBook 840 G3 Notebook PC: Windows 7 RAID Driver for laptop HP EliteBook 840 G3

  Hello!

  I got a (currently non-prepared) new HP EliteBook 840 G3 Notebook PC I want to drop Windows 7 (64-bit) enterprise on.  But while trying to configure the operating system via a USB stick or a DVD - ROM drive, I get the following message from the Windows installation after you click 'Install now':

  "A required CD/DVD drive device driver is missing. If you have a driver disk, CD, DVD, or USB flash drive, please insert it now. »

  If one of your great technicians could direct me to where is this driver and how to install it, I would be very grateful.

  Thank you

  Nick

  Hi, Nick.

  The problem with your laptop is Skylake chipset and lack of USB3 drivers in your windows installation media.

  Skylake chipset does not have USB2 support until after you have installed the chipset driver.

  The solution to your dilemma is to run this tool on a PC with W8.1 or W10.

  There is a readme instruction link (found in the section release notes), which will provide you with the information that needed to get the W7 to install on your PC.

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

• EliteBook 840: unable to boot from usb flash

  Hello:

  I'm tempted to boot from USB drive to install a new version of Windows 7. When I press F9, I have only two startup options:

  -Computer portable hard drive

  -Computer laptop Ethernet

  The USB boot option do not appear.

  My BIOS Version is: 01.04 worm. M71 (24/02/2015)

  Note: I tested my USB key installation in the other laptop and it works very well.

  Thank you for your support.

  cherrera51 wrote:
  

  Yes, I know Rufus. How I said, I tried my USB in another laptop (a HP ENVY m4 laptop) and work very well. The difference is that the HP ENVY gave me the option to boot from USB and the EliteBook does not.

  I realized that, since the post, you did.

  I suggested RUFUS and EFI create setup of windows due to the startup problem, that you have with the Elitebook 840.

  It may be just what you need for this particular laptop.

  If you want this to work, then you must be flexible and willing to solve the problems.

• EliteBook 840 G2: EliteBook 840 G2 Compatible with Samsung 850 EVO gbs 2.5 SATA III SSD internal (MZ-75E500B/AM)

  I am issued an EliteBook 840 G2, with a HARD drive.  I want to upgrade to an SSD.  Most of my colleagues use the:

  Samsung 850 EVO 500 GB 2.5 inch SATA III internal SSD (MZ-75E500B/AM)

  http://www.Amazon.com/Samsung-2-5-inch-internal-MZ-75E500B-am/DP/B00OBRE5UE/ref=sr_1_3?ie=UTF8&QID=1...

  Is this compatible with the EliteBook 840 G2?

  Thank you!

  kengel

  Yes it is compatible

  Please read page 16

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c04560057-2.PDF

• How do I know the component list/parking list HP ELITEBOOK 840 G1.

  Hi gentlemen,

  -J' I buy a new laptop from the store. However, the list of parking is missing and now I want to know the /tradename manufacturer of each commponent inside. Please let me know.

  -For who uses HP elitebook 840 G1, if you have the same configuiration that my laptop as below. Please give me some information.

  HP ELITEBOOK 840 G1: P/N: H7M02EC #ABA S/N: CNU413CRRY

  I have 5 Core 4200u

  128 GB SDD: what is the manufacturer? (seagate West, sandisk,...)

  RAM 4 GB x 2: what is the manufacturer?

  Charger 65 w: Let me know the serial number and production number.

  Thank you!

  Hello

  Looking for an impossible mission. But for some components, you can check yourself by using the device (SSD) Manager or another tool like CPU - Z (for RAM). For the charger, each has its s/n.  You can find the following list with all reference numbers:

  http://PartSurfer.HP.com/search.aspx?SearchText=H7M02EC

  Kind regards.

• HP Elitebook 840 G1, G2, G3: Showing empty HP 2013 Ultraslim Docking station

  * It seems to connect has a new dock in a configuration that we already know works fixed whatever issue the dock. After connection to a working configuration, we can move to some other computer/editing we need to, and it continues to work. Not a real solution irritable, but it seems to work.

  When you try to use an adapter Displayport to VGA or DVI DisplayPort cable / to connect a HP 2013 Ultraslim Docking station to an external monitor, the screen comes up with no signal and goes to sleep. Connection with a VGA cable, it works very well. We have been able to reproduce this problem with several new, fresh out of the box docking station. The problem occurs on all monitors that connect us, even those who work with the other Docks to see.

  It seems to be the topology of Displayport Intel is picking up on the screen and making it so that the displayport cannot be enabled without connect 3 screens.

  The old version of the Ultraslim Docking station that had 1 displayport seems to work very well, it's just the most recent version 2013 which has 2 displayports who has this problem.

  Does anyone know if there is a newer firmware or where I can disable/stop the topology Displayport to pick it up a monitor and try to do 3 screens? If this isn't the case, we will probably have to go back to USB adapters and those who are no funny.

  Thank you

  Andrew

  System information:

  HP Elitebook 840 G1, G2 and G3 (question took place with all 3 models).

  Windows 7 Enterprise x 64

  Ultraslim 2013 HP docking station

  Dock Firmware 2.30

  Update USB, Chipset and graphics drivers to the latest version of the HP Web site.

  Hi @Andrew-CF -,.

  Thank you for posting on the Forums of HP, the issue you have with this HP Elitebook 840 is classified as a commercial product (business).

  Our sales support team provides support through this platform.
  If you need immediate assistance, you will need to open a session one business with our sales support team.

  Please click on this link: http://www8.hp.com/us/en/contact-hp/business-support.html for more details and support.

  Let me know if you want more information and/or assistance.

  Kind regards