EliteBook 8470P: missing a Driver
So I bought an old Elitebook from my previous employer, and I am shy to have everything updated a driver. Can someone point me in the direction of this driver? Google is no help whatsoever.
USB\VID_138A & PID_003D & REV_0104
USB\VID_138A & PID_003D
Any help would be greatly appreciated!
Hello
Validity fingerprint sensor driver
Concerning
Tags: Notebooks
Similar Questions
-
Dear Sir.
I am facing problem in installing driver for USB 3.0 in EliteBook 8470p on Windows 7 Ultimate 32 Bit Port. So please say if 32-bit is taken in charge or 64-bit supported for USB 3.0 driver.
its two USB 3.0 ports doesn't detect the USB 2.0/USB 3.0 or USB key (Flash DRIVE, portable, etc.)
Please answer soon
Hello:
The usb controller you model posted ID indicates that your laptop is not a p 8470, but a p 8460.
You need this driver usb 3 to this ID.
FTP://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54511.exe
The 8470p have the Intel USB3 controller and the 8460 p have the Renesas Electronics USB 3.0 Host Controller.
That's why I finally asked for hardware ID, because if you had a 8470 p then or the other of these Intel drivers I posted should have worked.
-
EliteBook 8470P: protecttools install question
I just instaled a new copy of windows 7 on my elitebook 8470p. I have downloaed and installed the drivers from neccasary one at a time. I try to install protecttools and IE I have a newer version already installed.
What is the problem here?
the reason why I want protecttools is for two things.
1. I installed the add-on software face recognision
2. I want to disable the everythim of his annoying beep you drive your palm on the fingerprint reader, I read that there is a setting here to turn sounds
Yes, I searched for the specfic model drivers and my operating system... I always get the same error message during installation
-
HP Elitebook 8470p BIOS password reset
Hello
Can help you with a BIOS reset on a HP Elitebook 8470p password
Serial number: [edited by Moderator serial number]?
Thanks in advance.
Thanks, but unfortunately did not work.
Have registered a case with HP, answer below, waiting for answer:
Hello
Here are the steps to create USB Bootable USB drive and use the HPREADID for the information. TXT file.
You need create the boot USB device and run the HP ReadID since the USB boot device. Here are the instructions step by step to get the necessary information.
- Connect a USB device to the USB port on the computer
- Run the Application HPUSBFW. EXE
- Ensure that ""device "' > > ' File System" : FAT 32 and > > "" Volume Label " is filled in as seen in the image above."
- Select/check mark > > create a boot BACK disk
- Select Browse and locate the file extracted USB Boot > > Files BACK into the system.
- Select OK and select the Start button
- Click on the " Yes" option to format the USB key (* Note all existing data on the USB key will be lost) ""
- USB drive will begin with the message 'Formatting the device' (* Note: this process will take a few minutes)
- You should see a Message format complete successfully
- Click the close button to exit the application.
- Now copy the file P32015_hpreadid.exe from the screen on the USB.
- Connect the USB device to the system, and turn on the device.
- Press ESC on the keyboard to bring up the START MENU
- Then select the F9 option to bring up the OPTION of START MENU
- Select the DRIVE HARD USB and press enter
- You should see a prompt C:\ .
- Enter the following command to C:\ guest
- C:/HPREADID.exe Press ENTER to get the information to display on the screen
- C:/HPREADID.exe > info.txt and press enter-T his saves the file on the USB key as info.txt
- Ask to Email us with the file Info.txt of new measures on the issue.
Once you have the info.txt file, please send us the same as an attachment. Please let me know if you need help on the case.
-
8470p: Elitebook 8470p help install XP
Hello
I need help.
I want to install Win XP 32 bit on my Elitebook 8470p, which came with Win8. I need to do a clean XP install on the laptop.
If anyone can help me please you through the steps necessary to install XP on this laptop?
I have a bootable CD with installation of XP, I start the installation but the laptop freezes at the "Setup starts windows" and displays the BSOD with acpi.sys inside.
I tried many options in the BIOS, like disabling AHCI and activation IDE mode and a lot of other options, but no one allows to go beyond this error.
Thank you.
Hello:
Set the drive controller setting in the BIOS to AHCI.
Also enable the legacy mode in the BIOS, that must disable secure boot. XP is not compatible with secure startup.
Then read the info at the link below, section of Intel. Then read the info on the downloadable document for how to integrate all the sata drivers.
I compressed upwards and tied the drivers that you need wake below.
Slipstream the unzipped file the entire file.
-
HP EliteBook 8470P: simple exchange of ssd with hard disk?
I just bought a 1 t Samsung SSD 850 EVO 2.5 "SATA drive III to replace the hard drive in my Elitebook 8470P. Is that going to be just a simple swap where I remove the old hdd and plug the new ssd? That was the plan, but I have been wrong before passing.
I have 2 images of system backup if necessary. I disabled the auto Defrag in my security software. I am completely new to ssd and would have had to ask this before I dropped a bundle on one, but it is what it is. Any help is appreciated.
Hello
It is possible and I hope that your backup image is appropriate.
Kind regards.
-
HP Elitebook 8470p: bios password forgotten
Can I get the default bios password for.
HP Elitebook 8470p
Series: [personal information]
Product: C3J53UP #ACB
Hello
Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.
If you Contact HP Business support they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.
Kind regards
DP - K
-
EliteBook 8470p: remove the custom logo of 8470p - using EREPLOGO. EFI
I just bought a used HP EliteBook 8470p who I am in reconstruction.
The previous owner (who I didn't contact) changed the POST logo screen, appearing briefly at startup to display a political statement - I want to remove and restore the default the HP Logo.
HP (702342-001, created in June 2012) technical white paper, I determined the following high level steps:
-I'm running BIOS 2012 generation specifications
-The EREPLOGO of HP. EFI utility is required to make the changes by using the option "ereplogo /e.
-J' I run the EREPLOGO. Utility of EFI "EFI Boot file" option in the Menu "Startup Options".
Questions please:
Is this still the correct way to implement this change?
The white paper and the SoftPAQ containing the utility (sp58176.exe) are both dated 2012. Here is the latest version available? That is 4 years old!
Thank you.
For those interested, I managed to solve the problem that I came with the help of this EREPLOGO. The EFI utility.
The utility is available for download in the software and drivers for my device (HP EliteBook 8470p) Web page and I followed the steps described in the technical documentation that accompanies the download. Crime (in this case) logo has been removed by the use of a control subject via the EFI Shell to start setting switch.
So yes, it's getting a little old, but the utility worked perfectly on my system BIOS UEFI.
Thanks HP!
-
Updated my tx1000 Pavilion to Win 7 and missing a driver I can't find online. The missing driver is listed under other devices and called coprocessor... help please
Hello:
Here is the link for the driver you need.
Paul
-
EliteBook 8470p: rest the bios lock
I thank everyone for your interest in HP responded to my problem and no problem has been resolved or not, I'm very happy to get in touch with me, but we're not able to solve the problem because the real.
-Buy the user of the machine
-L' lack of an official purchase invoice
- And the title of the warranty periodGreetings
Hello
The only option left would be to replace the bios chip - is an example on the following link.
http://www.eBay.com/ITM/BIOS-chip-HP-EliteBook-8470p-8470w-no-password-/381247763229
Kind regards
DP - K
-
EliteBook 8470p: drivers for HP EliteBook 8470p
Hello
I am trying to find the drivers:
-System base unit
-BCM20702A0
-Network controller
HP EliteBook 8470p.
Thanks in advance.
Hello:
Here are links to the drivers you need...
Base system device:
BCM20702A0:
Network controller:
-
Missing error driver unable to connect to the Internet
Original title: I deleted a driver
I deleted a driver for my Wi - Fi accidentally when I was manually cleaning the hard drive. When I try to connect to the internet the computer says missing a driver. any suggestions or guidance on how to reinstall?
Hello
What is the brand and model of the computer?
Method 1:
If you are unable to connect to the Internet via the wireless connection, you can switch to a wired connection to download the driver or to download the driver on another computer.
Driver can also installed from driver disk provided by the manufacturer of the computer.
Method 2:
You can also perform a system restore to the date when the computer was working fine and check.
What is system restore?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Important: Restore the system affect the system files of Windows, programs and settings of register that have been changed recently. It can also make changes to scripts, files, batch and other types of executable files on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file.
Method 3:
I suggest you visit the manufacturer's Web site and download and install the latest wireless drivers or if you use the link give and check if it helps.
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
Hope this helps and keep us posted.
-
EliteBook 8470p do not use more than 3 GB memoury
In my HP elitebook 8470p I have 4 GB of ram but only 2.89 GB is used.
By running it on Windows 7 Professional (32 bit). Why do you have that I have more than 1 GB of ram unusable. Is it possible to use it?
Hello
Please read the long explianation:
http://blogs.msdn.com/b/hiltonl/archive/2007/04/13/the-3GB-not-4GB-RAM-problem.aspx
Even with the 64 bit OS, some machines still needs RAM for the material. I'm working on a few machines that need 32 GB (no typo error) for the material.
Kind regards.
-
Missing UltraNav driver on Windows 7 / T400s
In "Device Manager" of Win 7, my mouse shows as "PS/2 Compatible Mouse" and keyboard shows like ' keyboard Standard PS/2 '. Here's what I got after a new installation of Windows 7 Ultimate 32-bit and after running all the driver installation files downloaded on the Lenovo support site.
Note that among the files of the Lenovo support Web site, it is "ThinkPad UltraNav Utility". It was installed successfully, but it has not changed the PS/2 for a one UltraNav driver. Now I work without scrolling on the touchpad.
I checked the BIOS settings. The touchpad and eraserhead are turned on.
Problem solved. Only, I have installed the UltraNav utility but missed UltraNav Driver.
-
Hello
I installed Windoze XP on my ThinkPad T500 but I'm missing a driver. I have an unknown device in the device called "SM Bus controller" Manager. After a Lenovo web page, that it's the Intel chipset, which is GM45. However, no amount of Googling seems to be able to mount the missing driver. All advice is appreciated.
It turns out that install an older version of the driver chipset support did the trick. The SM Bus controller is no longer appears as an unknown device.
Maybe you are looking for
-
Overview of e-mail list 9.3 cup during the passage of the mailboxes
Since the upgrade to El Capitan and the new Mail (9.3) when I switch between the mailboxes, the preview of the list is cut as shown in the screenshot below. If I resize the preview pane displays the full text of the preview of the list, but this is o
-
Persistent black screen after startup on Satellite Pro A210 (PSAFHE)
Need help, need advice on how to solve a persistant problem with black screen after put into initial service. Initially its fine but after the initial Toshiba of the screen just goes black, and the rest in this way, the PC stays on. Have you tried F8
-
Mac App Store get confused with partitions/external records
I have a MacMini with 2 HD. One with El Capitan and the other with the Mavericks. When I installed El Capitan, I realized Mac App Store by default update all applications even those of Partition of the Mavericks. So I disassembled the Mavericks score
-
After BIOS update easy media are turned on all the time
Hi all My problem is:TOSHIBA TEMPRO alerted me to update BIOS my laptop and I installed the update but, after the update doneMY TOSHIBA easy media LED is all the time and power on & off led does not work very well And if I want to turn off the LEDs,
-
Windows-compatible Logitech is Basic.
Original title: logitech.com. is it compatible with windows basic