EliteDisplay S230tm touchscreen monitor won't touch

Similar Questions

• HP EliteDisplay S230tm: EliteDisplay S230tm - monitors the 2 duplicate keys

  Hello.

  I faced the following problem:

  Liien connected 2 monitors EliteDisplay S230tm 400g 2 hp with Win8x64 installed in mode station dual monitor - usb cable for two touchscreens is also connected. When I press on the touschcreen of the first monitor (primary meen) to the same touch is duplicated on the second. When I press on the touschcreen of the second monitor that nothing happens at all. So I can't use screens touch separatally, I meen place different applications on both screens and operate with them by touch screen.

  I'm not sure? Maybe its possible to solve the problem of cgahanging all win8 settings or install HP software?

  Problem was sold after a few manipulations with the settings of operating system with USB ports:

  1 calibration sensor control panel-> Tablet

  2 reconnect the USB cable to a different USB port - in my case of USB2.0 to USB3.0 on hp400g2

• EliteDisplay S230tm: Touch EliteDisplay S230tm w / 10 Windows

  I have problems with activation correctly touch on my new S230tm operates on 64-bit Windows 10.

  When the computer is restarted, it takes a while until the key is turned on - random - sometimes it is sometimes hours, minutes, or even a day. But once the contact starts to work, it works flawlesly day a week... until the computer is restarted again. After that, it's the same wait-and-test procedure.

  Windows recognizes as a full touchscreen monitor screen and monitor displays properly in the device (including the HID device to the touch monitor) Manager.

  I've updated the driver to the most recent available.

  Tried on two separate machines (two 10 64-bit windows) - same question.

  Any ideas? This is getting really frustrating...

  To close this topic - it was a hardware issue touch, like, day 1.

  Fix, they changed the electronic system and now it works.

  Hope it lasts

• Part of the touchscreen is unresponsive to touch

  Laptop model:

  HP ENVY 15 t-j000 Quad Edition laptop PC touchscreen

  OS: windows 8.1

  My phone is 1 month old. A few days ago part of the touchscreen is unresponsive to touch, I restart windows several times, has not worked! I really disappointed, but all of a sudden one day, it works normally. But it's not stable, sometimes it works, sometimes not.

  I did the system that did not restore - worked

  Update driver graphic and all available through HP support assistant - did not worked

  Install all the update of windows available - did not worked

  A windows RESET (no) - did not, too!

  I made this statement: http://support.hp.com/us-en/document/c03488148

  Not much!

  I think that it's a firmware problem, but I'm not sure and I don't know how to fix the screen touch firmware. Someone help me, please!

  Hi Thiet,

  I re-charged factory BIOS settings to the default configuration. That should help to set the resolution. In addition, make sure that you are ready to view recommended settings under the Advanced display settings. The tension is a series on the laptop. Just make sure that the AC adapter, it is at your fingertips for your country.

  I hope this helps.

  Thank you.

• HP 2311 x monitor won't sleep

  I have my system my computer Setup will put my monitor to sleep after 10 minutes if the computer is idle.  The problem is that my monitor will not fall asleep.  It shows the system status menu, scan for input device, said so he'll sleep, power light goes Orange and a few seconds later he wakes. Then start the whole process again and again.  If I put the system to sleep monitor goes to sleep (didn't at first when I got until I updated the driver of HP).  I connected it to the DVI plug.

  It seems that I found my own solution and I'm posting so it can help others.  Although my computer is about 3 1/5 years it has a DVI and VGA connections for the monitor.  The HP2311x monitor has DVI, VGA and HDMI connections.  I got the screen hooked up using the DVI connection.

  I changed and hooked it up to the VGA connection.  Set the computer up so the monitor going to sleep in a minute and waited.  Monitor went to sleep and not wake up until I moved the mouse.  Tested several times more and no problem.  So apparently there's something with connections DVI monitor won't sleep when you use this connection.

• FT200HQL touchscreen monitor works do not w / HP Pavilion dv7-5000

  After searching for and buying touch screen FT200HQL, it does work with my HP Pavilion laptop dv7-5000, Windows 7, 64-bit.  I have the USB cable is connected (even if it says that it is optional in user's Guide - not an option if you want the touchscreen to work).  I tried it with an Acer, Gateway and an another HP Pavilion laptop (all Win 7), & it works perfectly with them, but not w / mine.  All my drivers are up to date.  (Although there is not driver site Acer for the FT200HQL for Win 7 & I don't think that what they have listed as a driver for Win 8 is a pilot).  A Microsoft Search for a driver for the FT200HQL shows one, but he said that mine is up to date.  Help, please!  I really like the monitor & don't want to send again, but I bought it mainly for the touch screen feature.

  This is posted on the Microsoft & HP forums also.  A support engineer, Amit K. Verma, w / Microsoft responded w / several suggestions & what has worked has been updated the graphics card.  My touch screen works now!  Woohoo!  Amit ROCKS!

• Is it possible to set up a secondary monitor using a touch screen of Envy 15 t-j000 with Windows 8

  When I bought my laptop, I was told that I could use a secondary monitor to display several documents, spreadsheets, Web sites, etc.  I was also told that there is a connection on the laptop, but it was not.

  Welcome to the HP, Phoenix forum.

  According to the Guide of Maintenance of system for the Envy 15, you might have a HDMI port on the left side of the laptop.

  HP ENVY 15 Notebook PC and HP ENVY TouchSmart PC - Maintenance and Service Guide 15 laptop

  Page 15 of the Service Guide:

  You must also have at least one or two ports high-speed USB 3.0 on each side of the laptop.  Note that if your laptop supports it, as the USB 3.0 #4 is also a USB 3.0 port - an interesting option of load.

  One of these port types can be used to connect an external monitor compatible HDMI.

  If you must use USB 3.0 ports because your computer does not come with a HDMI connection port, then you must buy a USB 3.0 to HDMI .  NOTE: The example shown in the link is just an option - many brands of these converters exist. You should consider buying any brand that you like.  Don't forget to buy a converter that responds to the requirements of resolution of your monitor - buy for the quality and features.

  HP Notebook PC - connection of a monitor, projector or a TV (Windows 8)

  I hope this helps!

• I use Windows XP Dell computer - I downloaded some drivers and now my monitor won't work, but thesystem is running in the background. How can I get my monitor appears again?

  Hello

  I recently downloaded some drivers using the software "Drivermax" and in doing so, I restarted my computer Dell Windows XP, whom he treated and Startup logo XP deleted monitor on me but the system is still running. There no display no matter what he went completely empty on me. I tried restarting several times more and it begins as bright until properly on newspaper and he then he goes empty dark again on me. I tried the BIOS setting, but nothing happens... I believe that I have installed the drivers screwed something... I well surly need help here.

  Thank you
  Dave

  I gave it try but without success. No idea how to install the driver in safe mode

  You could use the system restore and roll back to a point just before that you have installed the drivers.

  A little advice about these utilities "update Driver", ditch just them!  Basically, they cause more harm than good, and some of them are dangerous simple!  You don't need those utilities and nine times out of ten people update their drivers for no other reason that they think that the new drivers are better than work perfectly those they already have.

  John

• My monitor won't wake up

  I have a HP 6560 b with Windows 7.  Only in the last days, this problem.  When the monitor goes to sleep, I can't wake him up.  I can hear the computer wake up - the fan starts - but the screen remains dark.  I have to reboot to get to the back of the screen.

  Any help is most appreciated.

  Hello jorlofsky.

  Have you noticed that the internal LCD screen waking up rather than the external monitor?

  If the problem arose only in the last days you can also try to perform a Microsoft System Restore.  The steps are as follows.

  1. Restart your computer and press F11, until the recovery of load Manager.
  2. Select "Microsoft System Restore" under Advanced Options.
  3. Select a point before when the problem started.
  4. Check if the problem persists.

  This should not affect the personal files other than those that are stored on your desktop.  So be sure to back up all the files on your desktop before performing these steps.

  Let me know the result.  Have a great day.

• Monitor won't wake from sleep - Vista

  I know it was a topical issue a few years ago, but I still can't monitor back on sleep of the form.

  Card HP computer - Vista 64 home premium SP2 - 512 MB NVIDIA GeForce9500GS

  I tried many patches assumed there.

  Updates on this issue?

  Suggestions in these links help you find a solution for the issue.

  http://social.technet.Microsoft.com/forums/Windows/en-us/42e3381e-19ef-4078-927d-1208a5fc48f5/desktop-wont-wake-up-from-sleep?Forum=w7itproperf

  See also:

  http://social.technet.Microsoft.com/forums/Windows/en-us/eb057f5d-B3E9-419e-AC72-3e00011bf961/monitor?Forum=w7itproperf

• Monitor won't turn on after power off

  Any ideas on this problem:

  I have my performance to save energy mode game to never put the computer to sleep and turn off the monitor after 10 minutes.

  When I go to move the mouse or use a combination of keys the monitor will power not to again.

  The only way I can use the computer is a strong power down and restart.

  The computer is a Dell XPS 430, 6 GB RAM, Q8300 Quad core, 750 GB hard drive)< 25%="" used)="" vista="" home="" premium="" sp2,="" dell="" s2209w="" monitor,="" logitech="" mx400="" laser="">

  I've updated the video drivers BIOS, drivers for the mouse, and all other dell update had to offer.

  Any ideas?

  Thank you very much
  Curt

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Click on change the game settings under Performance - restore default settings - save the changes

  Go back and set the settings and the advanced power settings as you wish - apply / OK

  =======================

  If necessary:

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• New U2413 monitor won't allow my Mac Pro computer to sleep

  My new U2413 monitor works fine. However, when I try to turn my Mac Pro (model 1.1, with OS 107.5) computer to sleep monitor goes to 'power save' mode that triggers the computer to wake up, the monitor return to power save mode, the back of the computer to sleep and so on. If I change the preferences of the computer to the monitor and the computer to sleep after 10 minutes, the monitor going to sleep, but the computer does not work. Any ideas? Is it possible to turn off the monitor power saving mode?

  I tried your suggestion to use an external USB key to monitor the connection. It works!  The computer and the monitor can now go to sleep at the same time. The only downside is that the auxiliary USB ports on the monitor is no longer connected to the computer. So, now I need a hub USB powered, connected to the computer, since I have more USB devices (card reader, USB stick or two, two scanners and two printers) that the USB ports on the computer.

  Thanks for the suggestion.

• E2014T, contactless in Windows XP?

  Hi how are you

  E2014T monittor does support window Xp System?

  XP will run the monitor at a resolution of 1600 x 900 default, but there is no touchscreen feature. None of our touchscreen monitors have XP Touch support.

• Two monitors L2206tm - Windows 7 - can all both touchscreen make?

  I didn't realize the L2206tm is a commercial monitor and I posted about it in the forum of home monitor products, then I copy the post here. I hope you guys can help me.

  I have a custom desktop computer and I recently got two HP L2206tm monitors because they were on sale. My computer running Windows 7 Ultimate 64-bit. I have two monitors connected USB ports on the desktop, but if I touch one of the screen of one of them, the click or scroll or any action that happens on the other monitor. Is it possible, and if so, what is the easiest way to set up two monitors to use the touch screen feature? Is there a software to help make this process easier?

  AFAIK, you can't touch on two screens in the calibration mode. In Clone mode, it works; but it's probably not what you're looking for.

  You can try the below:

  Use the 'Tablet PC Settings' in the ' Control Panel/hardware.  Under 'Display Options', select a touch screen, hit calibrate, move the text to the selected touch screen while pressing on enter (incase you have extra monitors) then MOVE your mouse to this screen and click on the text.   Then calibrate the monitor and following the instructions in the calibration.  Once the first monitor is installed, follow these instructions again for each additional touch monitor.

  Source: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/does-windows-7-support-dual-touchscreen-monitors/e86ac4fa-5321-45c1-a1d8-0ca95fdcfc17

  Thank you

  Sasi

• Pro 11 monitor and external of the touchscreen of the place?

  DOE instead of 11 Pro sessions (running an i3 or i5 processor) support the features of the touch screen button, such as the touchscreen monitor Dell 22?

  Someone here has tried a Dell P2314T monitor (touch) and managed to do work OK, so I guess others touch screens should work if you have a USB interface to the tablet to save the key (and native Windows drivers or 8.1 support).