E2014T, contactless in Windows XP?

Similar Questions

• (Redirected) Dell Inspiron 5000 [contactless] with Windows 10

  I'm sorry but I do not know where to ask this question >

  I want to buy a laptop 'Inspiron 17 5000 series No-Touch', but I would buy it with the next Microsoft Windows 10.

  Anyone happen to know the approximate date when this may be available and what impact this may have on the cost of the unit?

  Thanks in advance for your help.

  ~ Purrington

  Better for this post in the "do I buy" Forum, here:

  http://en.community.Dell.com/what-do-i-buy/f/3510.aspx

  Bev.

• E2014T, touch functionality, Windows CE?

  Trying to get this working with device windows ce 6.0.  The monitor works fine via the VGA input, but I can't get the touchscreen to work via the USB connector.  Is it still possible?

  Touch is only supported in Windows 7/8/8.1. We have never tested in Windows CE.

• SX2210T monitor in windows 8.1 contactless touch

  New Dell Inspiron desktop PC connected to existing touch screen monitor (after insurance it is, of course, compatible with preload 8.1).  After that a very long day and an hour of quality with support technology, we were informed that there is no drivers for this monitor is not compatible.  Given the time it took to reach this conclusion and opinion opposed to the purchase, can this be confirmed before cancelling that spent hours setting up this place, so I can return (with the laptop bought at the same time)

  Frustrating!

  Thank you

  I just mining.

  -Connect the usb cable (not usb with the same plug on both ends, the other guy as you use with a printer)

  -Go to control panel, and then choose "touch screen tools".

  -Click on the setup button next to 'configure '.

  Follow the directions. You just touch the screen if it's main screen, or tap on enter then press the other screen when the text is changed to this one.

• Hyper-V backup fails VSS in Windows Server R2 2012

  When I try to do a backup of a VM (just the virtual machine, nothing else selected) on my Windows Server R2 2012 machine, I get the following error:

  I still have to find an answer to this question.

  Log name: Application
  Source: SPP
  Event ID: 16387
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: BitVault
  Description:
  Microsoft Hyper-V VSS Writer writer experienced an error during the creation of the snapshot.  More information:.
  The event XML:
  
   
     
      16387
      2
      0
      0 x 80000000000000
      2746
      Application
     
     
   
   
      Microsoft Hyper-V VSS Writer
     
     
      Writer experienced a transient error.  If the backup process is started, the error does not happen. (0x800423F3)
      Unknown error (0x80004005)
   
  

  It's about getting the VSS event log

  A VSS writer has rejected an event with error 0x800423f3, the writer experienced a transient error.  If the backup process is restarted,
  the error does not recur.
  . The changes that the writer made to the writer components while managing the event is not available to the applicant. Check the event log for events from the application hosting the VSS.

  Operation:
  PrepareForSnapshot event

  Context:
  Execution context: writer
  Writer class ID: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
  Writer name: Microsoft Hyper-V VSS Writer
  Writer Instance ID: {4736e32f-5954-4b83-9ca5-37c560f308d5}
  Command line: C:\Windows\system32\vmms.exe
  Process ID: 3556

  PS C:\Users\Administrator > vssadmin list writers
  vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
  (C) copyright 2001-2013 Microsoft Corp.

  Author name: 'Task Scheduler Writer'
  The writer ID: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
  Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
  Status: Stable [1]
  Last error: no error

  Writer name: 'recorder VSS metadata store.
  The writer ID: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
  Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
  Status: Stable [1]
  Last error: no error

  Writer name: 'Performance Counters writer. "
  The writer ID: {0bada1de-01a9-4625-8278-69e735f39dd2}
  Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
  Status: Stable [1]
  Last error: no error

  The writer's name: "System Writer".
  The writer ID: {e8132975-6f93-4464-a53e-1050253ae220}
  Writer Instance Id: {2ff32bb9-b4dd-4959-bfa9-7ea79b4567ba}
  Status: Stable [1]
  Last error: no error

  Author name: 'ASR Writer.
  The writer ID: {be000cbe-11fe-4426-9c58-531aa6355fc4}
  Writer Instance Id: {4b7e63c6-ecb1-47f2-b317-e665b5de8c8c}
  Status: Stable [1]
  Last error: no error

  Author name: 'Microsoft Hyper-V VSS Writer.
  The writer ID: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
  Writer Instance Id: {4736e32f-5954-4b83-9ca5-37c560f308d5}
  State: [8] failed
  Last error: error renewable

  Author name: 'Dedup Writer'
  The writer ID: {41db4dbf-6046-470e-8ad5-d5081dfb1b70}
  Writer Instance Id: {5ac93c0a-dc01-4564-bac9-23051e2783a7}
  Status: Stable [1]
  Last error: no error

  Author name: 'Shadow Copy optimization Writer. "
  The writer ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
  Writer Instance Id: {a24b7ea7-e48b-44eb-9521-585648b7951b}
  Status: Stable [1]
  Last error: no error

  Name of the author: "COM + REGDB Writer".
  The writer ID: {542da469-d3e1-473c-9f4f-7847f01fc64f}
  Writer Instance Id: {b9b0674c-119c-4345-870d-fadc0e7beda4}
  Status: Stable [1]
  Last error: no error

  Author name: 'Registry Writer'
  The writer ID: {afbab4a2-367d-4d15-a586-71dbb18f8485}
  Writer Instance Id: {30a6302b-d5c8-4b9a-a0b7-61049e1c4767}
  Status: Stable [1]
  Last error: no error

  Author name: 'WMI Writer'
  The writer ID: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
  Writer Instance Id: {74ee0321-a546-4f94-a624-c715f2290db4}
  Status: Stable [1]
  Last error: no error

  PS C:\Users\Administrator > Get-VMIntegrationService - VMName

  VMName name active PrimaryStatusDescription SecondaryStatusDescription
  ------ ----                    ------- ------------------------ --------------------------
  Home time true synchronization OK
  House real Heartbeat OK OK
  Pair key / value of home Exchange real OK
  House real stop OK
  House VSS True contactless
  House Guest Service Interface fake OK

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet Hyper-V Forum.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverhyperv

  See you soon.

• Ability to E2014T, not XP or Vista Touch

  HELP how e2014t dell screen to work on windows XP computer touch?

  You can not. Touch is not supported under XP.

• Dell E2014T touchscreen

  I'm interested in changing my monitor touchscreen. I have a dell inspiron 660 s with win i-3 8, 6gig of ram and 1 t HD you know connection problems and can I still use my existing keyboard and mouse if I want to. thx for any info

  daveret

  daveret,

  Since you have Windows 8, you should be fine. The touch screen does not come into conflict with your keyboard and mouse present. Read the Guide E2014T before purchase.

• Development of contactless cards - to start

  We are looking to start developing Java card applications for use on a Java contactless card. We have to choose the type of card and the SDK, and we are on a short term project, so we need the software and hardware that is readily available and not too expensive. Can anyone recommend the best solution for chip (Java contactless), the card reader and the SDK?
  
  We will use Windows PCs and got some PC/SC contactless readers already if that helps.
  
  Any advice greatly appreciated.
  
  Published by: TechBloke on April 20, 2011 08:51

  To start the first thing you will need is the Java Card Development Kit. Depending on the cards you want you need either version 2.2.1 2.2.2. Stay away from 3.0 they are have any cards out there. That will be enough to start to develop your applet. Do you know what your host application will use to communicate with the card yet? C/Java/something else? You must only Java 6 user package javax.smartcard for the host.

  According to the number of cards you need for your project (it's an advertisement or a research project?) you could contact providers directly as NXP, Gemalto, G & D and OCS to see what they can do for you. If you develop a commercial application with volumes of high card sellers can be very accommodating :) They may be able to send samples.

  If this isn't an option and you need JC 2.2.2 you can seek some of NXP JCOP cards. I also tried some G & D dual interface cards who had JC 2.2.1. Unfortunately I don't usually get choose what cards I'm developing for. Usually, I said that it is the platform of the card to use so I can't source cards. You should be able to find some online retailers.

  In regards to the reader, you can opt for a dual interface reader OmniKey 5321 so that you can use the contact cards as well. I had trouble with some readers in the past, but I always had good results of the OmniKey and Gemalto PC Twin readers I have. The Gemalto I have is contact only, but they both have dual interface readers.

  See you soon,.
  Shane

• About this Mac window

  A week ago I updated my Mac Mini end of 2014 to Sierra and, among other drawbacks, I found that the "to comments of this Mac window" doesn´t show when it is called. In addition, the button of the substitution of Apple ban on which they consider unreliable applications (i. e.  those not manufactured by Apple or not using the iTunes channel) is now gone and I won't unintentionally control I have in my computer. In this case, this means that I can't update latest version of Penny Fletcher of his useful Multimarkdown application.

  You can adjust your settings to allow internet content to other websites by clicking on System Preferences > Security & Privacy > General and down, adjust the setting "allow applications downloaded on:

  To call ' about this Mac' Panel, press the black Apple > about this Mac

• I resized the Partition Mac to make more space for BootCamp and now Windows will not boot

  On a collague MacBook Air running 10.11.4, we used disk utility to reduce the Mac Partition so that we could then use a Windows tool to extend the BootCamp partition. However, upon restart, we got a BACK screen with the error that Windows cannot start because it cannot find the boot device.

  Help, please?

  This is not a mechanism supported by Apple to change the size of the Windows partition. Apple supports the remove/reinstall only.

  We try to remedy. Please after the release of the following OSX Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  What is the model/year of the MBA? Please, do not post the serial number of your Mac. Orders 'sudo' will ask for your password.

• After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

  I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

  Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

  TT2

• How to prevent the automatic launch at windows startup 10 itunes

  I have the latest version of Windows 10 and the latest version of iTunes on laptop Lenovo 2015 of 64-bit model.

  How can I prevent iTunes from launching at startup of the system?

  Try this...

  1. Right click on the taskbar.
  2. Select the Task Manager.
  3. Click the Startup tab.
  4. Click the iTunesHelper app.
  5. Click the button disable.
  6. Close the Task Manager.

• Bootcamp Windows - partition cannot be mounted

  Hey all,.

  I've been using Windows on my iMac (late 2012, Yosemite 10.10.5) without problem but today after I started MacOS Yosemite (to control simple file), cannot start again to return to Windows. Had no problem Bootcamp before... have not used to any advantage either 3rd disk utility. The only thing I have recently increased the Windows size 200 GB partition by decreasing the MacOS partition through disk utility (a month ago, no problem since then until today)

  1. Windows has disappeared from the startup disk

  

  2. disk utility shows disk0s4 gray and cannot be mounted. In addition, the correct partition size was 700 but here its listed as 500 GB GB (which was the old size before you increase it)

  

  3 when I try to restart with pressed ALT, Windows, but cannot restart, with a black screen showing "a disk error occurred.

  

  I'm not very familiar with techniques more. Only, I tried to install "Find" but cannot achieve anything with it.

  I tried your advice above and seems THAT NTFS is there...

  

  one last thing... when I try to check disk0s4, said "it should be repaired. When I hit repair; It says this:

  

  Need my Windows as soon as POSSIBLE, what more should I do?

  I don't have not upgraded to Sierra again. That I should? Or it will be even worse?

  I have tons of files on Windows that I need and unfortunately not supported for a while anywhere (sorry about that now).

  Help, please...

  stuff more to indicate...

  

  and I know if it's significant but cmd + s & ' fsck - fy "has not done anything other than check the Mac partition.

• 8gig of ram will be enough to use windows?

  I'm about to buy a macbook pro. This is the model of 512 gigabytes, 3.1 GHz, 8 GB ram. I want to only install windows to play spintires and that would be it. If I install windows and steam then spin tires it will the macbook running slower?

  rotating the tires to the requirements

  CPU:	2.5 GHz Dual Core

  RAM:

  4 GB

  If you install Windows using Boot Camp Windows wizard will use all your computer RAM, 8 GB, when you start in Windows. It's more than enough RAM for Windows and a spin the requirements that you have posted.

  If you boot into OS x, OSX will use all 8 GB of RAM.

• Why Windows 10 PC can't see iPhone as a hard drive?

  Just updated the iphone to ios 10.0.2 6 and now my PC 10 windows Explorer does not show the phone as a hard drive.

  I updated itunes to 12.5 and itunes sees the phone.

  Hi GSObob!

  Joe_7399 helped me to solve the same problem, check out our conversation: iPhone not recognized by the PC but recognized by iTunes

  I hope this can help you too!

  Good day!