Emergency with a KB

Similar Questions

• Need to record recovery or emergency with HP Pavilion 2291ea Notebook PC g6 (Urgent help required!)

  Then... I bought my HP yesterday after months of research. Im not a big fan of Windows 8 so decided to go back to 7, after hearing that his possible. After wiping the partitions and following all the steps, my laptop runs now all the apps and the original recovery disappeared, along with most of the sheet music, ideas?

  Yet I have to contact HP in this regard, they would send me a recovery disk?

  Thank you

  -

  naataan117

  Have you created your personal set of HP recovery disks when you first set up your computer? If this isn't the case, you will need to contact HP in your region or country via the Portal Support HP's worldwide, to order / buy recovery discs.

  Please click the White Star of KUDOS to show your appreciation

• Necessary emergency with a request: fill date of prior art on the column name

  Hello

  Can you please help me with the query. I would be grateful for your time and your help.

  I have the query and the following output. Basically, the query selects a date, a table and counties received documents based on the current date, day-1, - 2 days-, 3 days-4 days-5 days and especially 5 days. It's the query I wrote. Now the requirement has slightly changed and described below.

  Current query:

  SELECT SUM (CASE WHEN TRUNC (SYSDATE) TRUNC ( )File_Date() = 0 PUIS 1 AUTRE 0 FIN) Zéro ,

  SUM (CASE WHEN TRUNC (SYSDATE) TRUNC ( )File_Date() = 1 PUIS 1 AUTRE 0 FIN)   One ,

  SUM (CASE WHEN TRUNC (SYSDATE) TRUNC ( )File_Date() = 2 PUIS 1 AUTRE 0 FIN) Two ,

  SUM (CASE WHEN TRUNC (SYSDATE) TRUNC ( )File_Date() = 3 ALORS 1 SINON 0 FIN) Trois ,

  SUM (CASE WHEN TRUNC (SYSDATE) TRUNC ( )File_Date() = 4 PUIS 1 AUTRE 0 FIN) Quatre ,

  SUM (BOX WHEN TRUNC (SYSDATE) TRUNC (File_Date) = 5 THEN 1 ELSE 0 END) Five ,

  SUM (CASE WHEN TRUNC (SYSDATE) TRUNC ( )File_Date() > 5 PUIS 1 AUTRE 0 FIN) OverFive ,

  COUNTY (*) Total

  DE DOCUMENT_TABLE

  OUTPUT:

  Zero

  One

  Two

  Three

  Four

  Five

  More than five

  Total

  3

  6

  3

  6

  10

  50

  100

  178

  Now the desired output:

  The column name must be the date, for example the column name, we're Sysdate, two column name is Sysdate-1 day and the result would look like:

  OUTPUT:

  17/12/2014

  16/12/2014

  15/12/2014

  14/12/2014

  13/12/2014

  12/12/2014

  More than five

  Total

  3

  6

  3

  6

  10

  50

  100

  178

  Hi, just try below as you say it's urgent

  Select sysdate, sysdate-1, sysdate-2, sysdate-3,-4, etc of daul sysdate

  Union

  your query

  (you must ensure for the same type of data)

  are you using oracle report or just in the sql query. If the reports, then you can manage very easily with the introduction of a formula column.

• Emergency with necessary Index page

  Can anyone help? I use Dreamweaver 8 to modify and update the website of my work and I came across a very strange problem that I've not seen before. I modified a news page, titled "news.html" and transferred as usual last week. I also put some new pictures on the index page and did the same. It was fine at that time, but after looking at the page four days later, the news page shows now that the home page when you visit the site. It is not itself call the index page that the browser always shows up also the page as "news.html".
  
  But the strange thing is, when you first go to the site or click on the homepage of an internal page, you get a very quick overview of the original index before the news page page replaces. Nearly run him over.
  
  VERY confused. Have you tried re downloading the index page and am running out of solutions. Any help most welcome.

  the problem is your file "Bofa move.swf. It redirects automatically to the news page. You can test yourself in the browser:

  http://www.BofA.co.UK/BofA move.swf

  as you can see it will immediately redirect you to the news page.

  Either fix the code in the swf file or just remove it and replace it with an image.

• Firefox 6 does not recognize my latest Adobe flash player. It works with IE, so I think it's a problem only Firefox.

  Woke up to find that my Firefox has been automatically updated to Ver 6 +.
  The usual questions have emerged, with a few plugins not working do not. The annoying thing is Adobe flash player.
  I downloaded the latest version of the Flash player and installed Ver 10, however non of my Web pages back on this. All Flash content I want to watch (from a Web page) tells me to install the latest version of the Flash player. Done so 3 times nothing helps? Any ideas?
  NB: Works IE and flash worked fine on the same websites.

  IE uses another version of Flash (ActiveX), that most other browsers use - the plug-in version, which is what needs Firefox.

  1. download the file of configuration Flash from here:
  
  Adobe Flash - Plugin version.
  
  Save it to your desktop.

  2. close Firefox using file > exit
  
  Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
  
  {XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}

  3. then run the Flash configuration from your desktop file.

  4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/

  • On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).

  See this:
  
  http://vistasupport.MVPs.org/run_as_administrator.htm

• Satellite L40-17 t - black screen with error message

  Hi friends,

  I have Toshiba Satellite L40-17 t with windows vista 32 bit home premium. A few days ago just after my update of Windows.Black emerged with the following screen;

  ! ! 0xc01001d! ! 37241 / 90758 (\Registry\Machine\COMPONENTS\DerivedData...)

  Do County does not completely run either TI stops a few times at 90758 28470. Also I can't retrieve through products and recovery of HARD drive recovery.

  Type help at the earliest.

  Kind regards
  Stéphane

  Hello

  > Also I am not able to recover through products and recovery of HARD drive recovery

  You do not have an image of disk recovery and hard drive missing? :(

  > ! 0xc01001d! 37241 / 90758 (\Registry\Machine\COMPONENTS\DerivedData...)

  According to this message, the registry is damaged. You will need to reinstall Windows or mount it using the Windows disk copy. If you do not, you can download and try Windows Vista Recovery Disc, it's free.

  Post edited by: Jeka-HE

• Simple problem with a square wave and a Boolean LED

  Look, this is the case,

  Im doing a test for PCBS, it has an emergency switch and a sound signal. the buzzer is connected to the emergency with a microcontroller switch

  Case 1: Emergency button is not pressed, vibrator makes no noise (material) and therefore the LED in my program remains off.

  Case 2: Emergency switch is pressed, done automatically buzzer sound (in a square waveform: 1 second in high, 1 second bass (x 3)). But if I put this in the program of the LED flashes... because the signal is up and down. What I want is that the LED stays on.

  So my question is: is it possible to put a square on a led signal output and leading to keep it. (it should not blink).

  and if it's not allot of work can you please show me how do it with a simulation.

  (English is not my native langueage is why I can't explain it very good)

  With sincere friendships.

  Asrih

  
  

• Photosmart HP 5510 fails to print with the nine 364XL black ink cartridge

  The black cartridge HP 364 "SETUP" origin has worked well and I bought a black cartridge HP364XL via the HP Web site.

  I installed the HP364XL this morning, but he is unable to leave the necessary ink on the pages.

  The cartridge seems to be OK and there is no error message.  The paper passes through the usual way, but fate with no print on it.  The date on the box is September 2014, this is not out of date.

  I tried to find what the problem is.  I checked the cartridge is correctly installed and it seems to have ink inside.   I tried to print using the black cartridge again and again with different parameters, such as 'Fast draft' and 'Normal', but every time the paper emerges with no impression.  The 'supply levels' shows the black cartridge about 90% full.

  This is normally caused by the vent on the top of the cartridge being blocked, or a dirty print head. The document below will help you work out the problem. Let me know what happens.

  Black ink is missing on printouts

• Cloning of Oracle database with RMAN

  Hello dear colleagues,

  I intend to clone my PROD database to create a database of emergency with RMAN, the situation in the present case, it is that I want to use the same db_name so create spfile scp to the target server, run a level 0 backup dB, create the same file structure as well, but I'm confused because when I connect to RMAN to perform cloning as you can see...

  RMAN> connect auxiliary /
  connected to auxiliary database: prod1 (not mounted)
  
  RMAN> connect target sys/passprod1@prod1_ORI
  connected to target database: PROD1 (DBID=somenumber)
  

  RMAN> run {
  allocate auxiliary channel c1 device type disk;
  allocate channel c2 device type disk;
  duplicate target database to 'prod1';
  }
  

  -Is it possible that crushes my source PROD1 database

  -C' is ok, if I run the clone with the database of the source open with few users working? Even he will operate a backup, this will obviously have a performance impact but also the integrity of the data? I'm not sure what other files of this procedure will be used in clonning.

  -Should I enter into channel c2 backup full path to the source server?

  I enjoy any help and thanks in advance.

  Documentation:

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmdupdb.htm#i1008564

  Backup the basic replication does not require the same password (file)

  If duplication to a host remote and demanding that the same file names and paths created, then integrate the NOFILENAMECHECK.

  Hemant K Collette

• Still play songs from my iPhone when connected to wifi

  Had this problem before, but it stopped happening a while ago only to re - emerge with the iOS 10 update.

  I'm running on an iPhone 6 and used to play my music library on shuffle.

  Over the years, I've deleted some songs from my library of songs, but they remain available for re - download in iCloud.

  However, from time to time, if I play songs on shuffle when connected to wifi, one of these songs removed will be available on my phone and play.  It does not download to my phone and still only available for download on iCloud.

  Is it possible to stop these removed songs to play on quite my phone when connected to wifi?

  I'll add that I'm not on all subscriptions either except to increase my storage iCloud.

  Post edited by: sound_man

  I believe that you open the music application, select "download music", then make your choices from there.  If you do not select the "download music" it will first play all the songs that you have purchased.

• Cannot get Mac pdf on iPhone.

  Hello

  I have a fully software up-to-date mac and iphone.

  I have a PDF around 20 MB of my mac, I want to read on my iPhone.

  I tried the following:

  • Added the PDF to my iBooks application. iBook is set to synchronize everything however the pdf if not appearing is not in iBooks on the iPhone
  • I parachuted the pdf to the iphone, the window of dialogue emerged with «Open in iBooks...» ». Then I pressed the iBooks option and it launched, but the pdf is not there. I tried several times but it opens just iBooks without opening the pdf file. I also checked that there is no filter on it and PDF files are displayed.

  I checked and read a lot of pdf, so it is certainly the opening on mac iBooks and overview.

  I want to just litrally open this document on my iPhone, it is a little too much email.

  Can someone reccoemnd to other ways to read a PDF on my iphone?

  Thank you.

  Hello Wolfsoap,

  Thank you for using communities of Apple Support.

  I see that you are having problems with getting a PDF from your Mac to your iPhone. I have several things for you to check and two ways to do this.

  I would first of all, take a look at your iPad, iPhone or iPod touch with iTunes on your computer via USB to sync and make sure you have correctly set synchronization upward.

  Then, this article explains how on the synchronization of the PDF files on your iPhone: use iBooks with PDFs on your iPhone, iPad or iPod touch, more precisely, this section:

  Synchronize and save PDF files

  The first time you open iBooks once you upgrade to iOS 9.3 or OS X 10.11.4, you will be prompted to use iCloud. Learn more about synchronization of your books and PDF documents using iCloud.
  You can also add PDF files to your iTunes library on your computer by drag-and - drop the PDF file in your iTunes library. The files will be displayed when you prepare your device to synchronize. If you use OS X Mavericks or later, drag and drop your PDF documents into your library to iBooks using iBooks for Mac. All files PDF or iBook in your iBooks library are available to synchronize your device iOS through iTunes.
  To synchronize a PDF from your computer to iBooks on your iPhone, iPad or iPod touch:
  Select your iOS device. (Learn how to synchronize with iTunes).
  Under settings, click on books.
  Select Sync books.
  If iTunes is set to sync only the selected books, make sure that there is to check the box next to the PDF file you want to synchronize.
  Click on synchronize.
  You can also use iTunes to back up your PDF files. To transfer a PDF file on your computer and save them, transfer purchases from your device iOS to your computer. These files are not in an iTunes backup. Learn more about what is included in iTunes and iCloud backups.

  And finally, this article provides information about synchronizing with iCloud drive:

  Sync ePub, iBooks author books and PDFs with iBooks and iCloud

  Best regards.

• The OSX 10.4 installation DVD can be installed on a completely wiped Mac?

  I have an iBook G3, with the type of disc loading slot. At present, it has an operating system installed. I found a DVD of 10.4 Installation on craigslist for very cheap, but I know that this type of disk requires that a previous installation of 10.3 be on the hard disk. I have no idea, and I don't want to buy the DVD to see that it does not work. Here is a picture of the disc:

  

  Can it be installed on a Mac without any version of Mac OS x on the hard drive, and if not, is there a workaround or modification that I can do to make it work?

  There is a part number on the DVD, so maybe it's a way to know if the DVD 'install' is or

  isn't wall installation or upgrade to OSX earlier. What is visible in the image, it does

  not seem to be an update for version 10.3 Panther. And a gray-label would indicate the disk

  was designed for use with a Mac specific build version only. So far, she poses as an installation DVD full.

  The iBook G3 (white and colors) do not comes with an optical drive to load per slot. Yours is a G4?

  From what I can tell by observing that the Tiger DVD install image you posted, it most of the

  not match a full installation DVD Tiger, that I still have in the official retail box.

  Mine says:

  Mac OS X Tiger includes 2 XCode

  Version 10.4 2Z691-5305-A

  If you have access to the actual DVD, try searching for the item by part number; If it is hidden

  in the picture you posted, so I can't say what I see enough search. And the numbers I do

  See are not among those listed in the database MacTracker which shows all OS X build versions.

  {Something on an installation of Tiger DVD, is the content of the disc is compatible with the capacity of a

  Media single layer; so if you need to, you could make a backup of emergency with the old style drive

  optical drive. {Later versions of OS X have more content and a double-layer disc would be required.}

  Should the cost for the DVD be really cheap and compose a full retail disk, which can be large.

  Install sites such as welovemacs and others who used to deal with the old system of out of stock

  media, sometimes, you can see what they ask if they have a few for sale again.

  This page includes pictures of the media the retail labels more old OS X install original disks:

  http://www.Macworld.com/article/2101301/advice-from-an-Apple-Tech-how-to-get-old - mac-os-x-install - discs.html

  {Even though I have a few original on DVD, the oldest media of retail OS X disks that I have is Jaguar or Puma;

  I have a tiger in the retail box & the image you show looks like an installation-in-all support Mac DVD.}

  Are you sure that your iBook is a white G3, or is this a G4? You say that it is an optical drive slot-loading;

  G3 models all had tray optical drives. I used to own a first white model dualUSB G3

  and no iBook G3 models use an optical drive "slot-loading". It was only the first iBook G4... And I have

  have a last G4 iBook model perfect condition, always close. It comes with 10.4 Tiger gray-label.

  Good luck & happy computing!

• Satellite M105-S3041: where to find a second memory slot

  Hello everyone!

  I just desperately on the TOSHIBA forums for an emergency with a few tech question (more than a problem).
  I own a TOSHIBA Satellite M105-S3041, I currently have Windows Vista Edition full, but only with 512 MB of RAM.
  Yes, he did run the badly slow, so I bought 4 GB of RAM (two sticks of Kingston 2.0 GB).

  Now, the real problem comes when I begin to wonder "how I go to install", I turned upside down from my laptop and I find this small 'door' affluent as a memory icon little engraved.
  So I guess that's where the RAM memory.
  Now, my wealthy laptop RAM TWO modules for up to 4 GB of RAM, as stated in the User Guide, but when I opened the small 'gate' I saw that he was (or seemed to) that a SINGLE module and I couldn't see the stick of 512 MB of RAM today!

  Until "my computer is running on imaginary memory!
  Laughing out loud! "and I can not find the second module!

  Help, please! I need to install any memory now and here where I live there Center support TOSHIBA No. or even a dealer who could help me!
  So I depend only on TOSHIBA online support!, IF possible, in response, I can get a link to a video tutorial or maybe you guys include photos in your answers to guide me?

  Thank you very much!
  Trino A.

  I think that it has already solved the problem. ;)

  Otherwise, he would publish again.

• Satellite U500-10F - creating recovery disk after upgrade Windows 7

  I bought a Satellite U500-10th with Vista OS and I decided to upgrade to Windows 7, so I ordered at Toshiba upgrade disk and installed it.

  * My question is *: * it is possible to create with Windows 7 recovery discs? * in order to avoid the downside to install vista first then do the upgrade to windows 7

  Whenever I need to do a clean install and also to avoid the disadvantage that it is not too recommended to validate windows whenever you perform a clean installation, because the problems of authenticity can emerge with microsoft!

  Thank you

  Hi m.tarek,

  I doubt that this would be possible. First of all, you have ordered only an upgrade, which means that this version can be installed on a pre-installed version of Vista. It is not a full version that you can install without BONES.

  Besides recovering the files on the second partition (btw, that's a picture) contains the Vista operating system and not Windows 7. It does not update.

  Sorry mate, but this is why there will always be this update of s. Alternative, you can create your own image using Acronis True Image or other imaging software.

• HP Pavilion 15 PC laptop: laptop won't boot up - stays on the black screen

  My computer was working fine and then all of a sudden the screen went black.  I turned the power on and it came up with the error message "Unmountable Boot Volume" and then tried to solve the problem but just stayed on the screen black and never solved the problem.  I turned it off, did the hard reset when I remove the battery and hold the power for 15 seconds, but it's always the same.

  I went into the mode where I can try to restore the computer but it does not allow me to do. They say it restores and then just black.   I also ran a report where it says that the problem is "short hard drive DST Check: failed ' and gave me a code of 0SNHWW-7N987K-MFPWMG-60WF03.

  If there is nothing that can be done to help me I would be really happy I have use this laptop for work and really need to get it back running of emergency with minimal cost.  Thanks a lot for your help

  @Amyynatalia,

  The pleasure is all mine!

  I'm afraid not, you will be asked to pay more for the replacement drive as its not covered by the warranty.
  
  Keep me posted!
  
  Kind regards