Empty screen appeared?

Similar Questions

• When I reboot XP Home Edition, a file of microsoft empty folder appears on the screen

  When I reboot XP Home Edition, a file of microsoft empty folder appears on the screen

  Hello

  1 - is a file or a folder?
  2. What is its content?
  3. what message display?
  4. have you made changes on the computer before this problem?

  Please answer the above-mentioned questions and provide more specific information on the issue. This could help us help you better.

  You can check the question in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. click Startand then click run.
  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  d. When you are prompted, click on restart to restart the computer.

  In addition, run a full scan with your antivirus program and malware removal.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• a (small) empty window appeared in the upper left corner of the screen. Running Windows 7. It disappears if I reboot. No idea what it is and what I would do to this topic?

  The white goes away if I reboot.  Using Windows 7.

  Hi Blee3,

  It resembles a small empty window appeared in the upper left corner of the screen. I'll help you with this problem.

  1. have you made changes on the computer recently?

  2. what security software is installed on the computer?

   

  Method 1.

  Start the computer in safe mode and check if that helps.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  If the problem does not occur in safe mode, then proceed to clean boot state.

  A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

   

  Method 2.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

   

  Method 3.

  I would like to create a new user account and check if the problem still persists.

  Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account

  If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

• I was trying to import a large number of files on 10 Organizer.  10 Organizer now hangs at the launch.  The Welcome screen appears for a second and then crashes.  How can I fix it?

  I was trying to import a large number of files on 10 Organizer.  Now, the organiser hangs at the launch.  The Welcome screen appears for a second and then crashes.  How can I fix it?  I use desktop iMac with Yosemite.

  mercad611 wrote:

  I was trying to import a large number of files on 10 Organizer.  Now, the organiser hangs at the launch.  The Welcome screen appears for a second and then crashes.  How can I fix it?  I use desktop iMac with Yosemite.

  If the problem is related to a corrupted catalog, try to open the organizer with a new empty catalog.

  Hold down the SHIFT key at the launch of the Organizer. You get a dialog box with the choice to start with a new catalog, or start with a different catalog and even to 'fix' the current catalog. If your organizer starts with an empty catalog, use the option 'fix' on your corrupt catalog.

• load is0 10 to my iidown phone 6 s after finsh my phone restarts on the screen appear (photo and conncet quail itunes) iconncet my phon with PC and open my itunes

  ADOS iso 10 to my iidown phone 6 s after finsh my phone restarts on the screen appear (photo and conncet quail itunes) iconncet my phon with PC and open my itunes

  and stil again

  Take a look at these articles:

  Solve the iOS update and restore error in iTunes - Apple Support

  Get help with iOS update or restore errors - Apple Support

• When I try to open CompuServe, which I used for several years on Firefox, a screen appears saying: this isn't a trusted site and it wont let me.

  When I try to open CompuServe, which I used for several years on Firefox, a screen appears saying: this isn't a trusted site and it wont let me.
  Here's what's on the screen that appears when I try to open CompuServe and AOL CompuServe of owner:
  ___________________________________________________________
  This connection is Untrusted
  You asked Firefox to connect safely to my.screenname.aol.com, but we cannot confirm that your connection is secure.
  Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.
  _____________________________________________________________

  There was a security of Firefox auto update on Friday, August 7, 2015 after which this problem started to occur. On my other computer, I use very often and on which I also use Firefox, I can easily open CompuServe.

  You allowed the information to be included in the details of your system more when you posted. Look to the right of your original post, where it is said more details of the system.

• Empty windows appear in the recently closed Windows list

  Recently, I upgraded to Firefox 13.0.1. (It seems that he could have two updates on the same day or after the other very short, but I'm not sure of him. I will be reminding upgrades of multiple instances of Firefox, all this same version. Thus, it * could * be true that this problem has arisen with this version or a recent previous version.)

  Since the upgrade, empty windows appear in the list of recently closed Windows (RCWL). I try to keep the clean list, so when I'm done with a window holding sites I know I don't want to go back, I close all the tabs in the window, leaving an unused new tab *, and then close the window. These windows should not be included in the RCWL, but they are now.

  [* I put new tabs to about: blank so that they will load the pages automatically.]

  Since this standard behavior change comes with an upgrade, and since I can't find any reference to it elsewhere, including the Support of Mozilla, I suspect that it may be a new bug.

  In troubleshooting, I tried deleting the list recently closed in these windows and tabs. I've never had before, but it seemed worth trying and as something that might have been relevant. I thought that perhaps a window would not "Save as really empty ' if it had recently closed tabs in the list. This tactic did not work.

  I also tried to start Firefox in Mode safe, the reopening of all the RCWL, each one tab - a 'new tab' in all cases - closing then close each window. They always appear in the RCWL.

  Please let me know if I can (or need to) provide additional information. Thanks for any help!

  Try to set the browser.newtab.url pref to about: blank so currently, you do not use this parameter.

  • http://KB.mozillazine.org/about:config

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• Tecra 9100, a blue screen appears

  When I start Novell GroupWise on my Tecra 9100 a blue screen appears? Very weird. Can someone help me to stop this.

  This happens when I start CD creator as well. I would like suggestions.

• Black screen appears in green on the Satellite

  It is a problem that sometimes occurs before which would be fixed on close down and restart. But now, it seems not extinguish. Most of the black spots and a few other colors appear in green. for example, the black toshiba start screen appears entirely green with the usual letters. And after starting, there are green stains all over, especially there where it should be black.

  Can someone help, please?

  Hello

  For me, this looks like a defective screen. It might also be malfunction of the inverter FL.
  However, it seems that there must be a hardware failure. In this case, the only way is to contact Toshiba service for assistance.

  To be 100% sure that it of not a software problem, you can try to recover the operating system or / and try updating the graphics card driver.

• Portege M200 - Toshiba start screen appears and then nothing

  My Portege M200 does not start.

  Turn it on and toshiba start screen appears and remains like that. Nothing works (or F2 to enter the BIOS)

  Any ideas?

  Hey,.

  To me, it looks like hat it is a certain hardware for computers problem stops at the screen of the Toshiba BIOS...

  It's really hard to say what could be the reason

  First of all, you must follow the instructions in this article and maybe it helps:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

• Re: Satellite A300-29n - blue screen appears during installation of XP?

  Hello

  I'm working on windows vista and no problems
  When I tried to put in place XP on the machine, after loading windows files
  It was written "the installation program starts windows.
  everything was fine
  a blue screen appeared (a problem has been detected and windows has shut down to prevent damage to the computer...)
  Please help me
  Thank you

  Hello

  Go to BIOS (press F2 during the laptop turn on) and change the compatible SATA AHCI mode.
  Save the changes and try to install again the Win XP on this laptop.

  Good luck

• A satellite - blue screens appear

  Can Hi anyone help?

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 2057

  More information about the problem:
  BCCode: 50
  BCP1: FFFFF880060F5C5C
  BCP2: 0000000000000001
  BCP3: FFFFF880079A0165
  BCP4: 0000000000000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\033110-22464-01.dmp

  THX

  Hey,.

  Unfortunately, I can say nothing because a lot of information is missing:

  -Exact cell model
  -(Pre-installed Toshiba?) exact Windows version
  -When is this blue screen appear?

• Equium A100-147 - password appears as soon as Toshiba screen appears

  Hello

  My husband and I are two retreats with very little knowledge of computers, and we received a Toshiber Equium A100-147 of a friends wife after the death of her husband.

  When turn it on as soon as the Toshiba screen appears it want an entered password and my question is what is the password.
  I looked through all the documents related to our friends for the computer and there is nothing there.

  Elaine

  Hello

  I think you're talking about the BIOS password.
  This password can be set or removed in the BIOS and its type of protection.
  Without knowing this password you will not be able to boot Windows system

  Also it is not possible to remove this password if you know n t s the old password.
  Only the technician of the ASP (authorized service provider) would be able to bypass and remove this password

  So I see only one solution; local ASP contact and ask for help.

  Welcome & good luck

• Ati2vag a blue screen appears

  When you run certain programs on XP Professional service pack 3, a blue screen appears saying something being stuck in an infinite loop and the Ati2vag memory dump. This can be corrected and how could I do? Enjoy any viable suggestion!

  [transferred to XP-Hardware/Drivers of Virus & Malware]

  When you run certain programs on XP Professional service pack 3, a blue screen appears saying something being stuck in an infinite loop and the Ati2vag memory dump. This can be corrected and how could I do? Enjoy any viable suggestion!

  IMPORTANT - end of life XP: http://www.microsoft.com/en-us/windows/endofsupport.aspx

  This is part of your graphics ATI video driver:

  http://www.bing.com/search?q=Ati2vag&form=HPDTDF&PC=HPDTDF&src=IE-searchbox

  -steve