Enable hibernate in Windows XP

Similar Questions

• How to enable "mode Hibernate for windows 10.

  Hello

  How to enable "mode Hibernate for windows 10.

  Thank you very much

  Unit: Satellite Pro R50 - B - 10 G

  Hello

  Mode what do you mean exactly: standby mode standby or Hibernation or hybrid?
  You can enable or disable hibernation using the invoked command: powercfg
  start cmd.exe in admin mode!

  Activate the Hibernate in Windows 10: the command prompt enter: powercfg-h on

  Disable the Hibernate in Windows 10: enter in the command line type: powercfg-h off

• Hibernate in windows 8

  Well well Hello again,.

  I want an option "hibernate" on my list of... sought judgment on net, I tried these processes, but I did not see a checkbox "Display Hibernate" while doing so... what I need to do?

  Hello

  Please refer following way and made me know what stage you have the problem:

  http://www.kapilarya.com/enable-Hibernate-option-in-power-menus-for-Windows-10

  Hope this helps, good luck :)

• How to get the Hibernate in Windows XP

  How to get the button to Hibernate in Windows XP

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Windows updates won't find updates for Office or any other Microsoft programs I installed and there is no option to enable it in Windows Update settings.

  OK, so I just had to re - install Windows 7 on my laptop due to a disk failure (Windows 7 Home Premium SP1) and hit a brick wall with trying to turn on Microsoft Updates instead of Windows updates.

  I try to click on the link "Learn more" on the bottom of the page to update on the line "Get updates for other products Microsoft." and it opens just a web page with a graphic telling me to open my Start menu and click on Windows updates.

  Catch 22 is that Windows Update has no options for anything other than Windows. He won't find the updates for the office or any of the other Microsoft programs I installed and there is no option to enable it in Windows Update settings.

  Exactly what I am missing, and where has Microsoft moved the activation of Microsoft Updates page too, because when I click on the link need me to http://www.update.microsoft.com/windowsupdate/v6/thanks.aspx?ln=en&&thankspage=5 that makes a whole lot of nothing.

  Thank you!

  Original title: Microsoft Update in Windows 7

  You might look into this it's the new way to update after a clean install.

  https://blogs.technet.Microsoft.com/windowsitpro/2016/05/17/simplifying-updates-for-Windows-7-and-8-1/

  It is expected by M$, we must now jump through hoops to clean install.

  It comes in a way most old but still works just check out some of the last comments for new KB # install manually to the contrary in this order

  KB3020369

  KB3161664

  KB3161608

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

  After you install Office options updates for other products from M$ and the new software should appear.

• How to enable ipv6 in Windows 7 x 64?

  How to enable ipv6 in windows 7, it got disabled by me running a software tweak and now I can't access my homegroup!

  Open the network and sharing Center > Center located on the screen, click on your connection > click, properties > Check, ipv6

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• How to enable aero in windows 7 starter without upgrade?

  How to enable aero in windows 7 starter without upgrading and it is possible

  If you believe in the existence of a 3rd party utility that 'claims' to be able to enable Aero, yes it is possible. Unfortunately, the success rate is low and the user is often left with way to greater than not Aero problems. That's why I'm not going to post a link to the utility. :-)

  Keep in mind that the use of other functions and this Aero in older versions severely paralysed the life of the battery, cut it in two, most of the time. That's why the Starter edition has so many limits...

• How can I activate Director 11?  D11 I loaded on my MAC from a disc.  In the activation window, the ups and downs of the choice of activation are cut.  The choice of the internet is enabled, but the window says"Activation"-no link. "  But I am conn

  How can I activate Director 11?  D11 I loaded on my MAC from a disc.  In the activation window, the ups and downs of the choice of activation are cut.  The choice of the internet is enabled, but the window says"Activation"-no link. "  But I'm connected to the internet.  The phone option is not available.  When I call Adobe directly, phone mail says that the Director is not supported.  Suggestions?

  Moving to the Director

• "Hello everyone," I need to know how to enable javascript w/Windows XP, thanks R.E.B.

  Hello community,

  
  
  I have sort of defragmentation in a meticulous Norton PC Cleanup ' unintentionally disabled my javascript and the purpose it was
  intended to be, I am currently on w/Windows XP, using Google as my primary program. I humbly request the following
  question; How can I enable javascript when running Windows XP?
  
  
  Thanks a milnjanka
  Nargesse...

  Hello

  Tools > Internet Options > Advanced tab

  Scroll down the list of settings until you see the 'Java' category

  Use your mouse to place a check in the box next to the only option under 'Java '. This setting option is 'Use JRE 1.5.0_05.'

  Click OK

  Restart the computer for the changes to take effect

  Tools > Internet Options > Security tab

  Click on the custom level button

  Scroll to script category

  Click the button enable Active Scripting

  Click Ok

  Click on apply, Ok

  Check the Java Version here

• Grayed out button standby and Hibernate in windows XP missing button

  Hi, my computer is a Dell (Inspiron E1505) using Windows XP laptop. I had a problem of virus a few weeks ago and had to format and reinstall everything. I'm really bad with computers and apparently I did something wrong because now my sleep button is gray and my Hibernate button is missing. The two were there and works perfectly before the virus.
  I went to check the power options, and there is no Hibernate tab more. I checked the following instructions from Microsoft are supported and I labor thing ACPI and in one of the assignment, he says I'm supposed to check a BIOS thing and I have no idea how to do that. I really really need help with this because my laptop is old and it takes forever to start.

  Aicam,

  For standby and Hibernation work, you must have at least as much disk space on your drive hard as you have RAM in your system.  For example, if you have 4 GB of RAM, you need more than 4 GB of disk space free for standby/sleep extended to work.  How much free space and RAM do you have?

  HTH,
  JW

• Cannot enable WUSB600N on windows 7

  I installed Windows 7 RTM and the WUSB600N USB adapter. I can see the 600N in Device Manager and in the network and sharing Center. In Device Manager, you see that it is enabled. But if you look in the Network Center and share the 600N is disabled. When I try to enable it, nothing happens.

  When I run diagostics I get a message that there is a problem with the driver. I downloaded the latest driver and installed, but I can always allow. I also tried to use a Ralink driver... but still no luck. There is something wrong with the driver, but I don't know how I can solve this problem.

  Does anyone have an idea how to solve this problem?

  Hi Bluejag,

  I solved the problem... not in the way I normally would, and as but I don't have the operation of the thing.

  The problem with the 600n, is that you can't put it in the pc before installing the drivers of 'old' (on the cd). If you use the Ralink driver or download the latest driver for Linksys you aren't able to operate (Finally I couldn't).

  Here's how I got the job 600n

  I installed Windows 7 new :-(.

  Put on the CD and installed the driver (the old driver works)

  Put the 600n into a USB port.

  And it worked. :-)

  Even after updates of windows.

  Put it in a different USB port and... same old result. I was not able to enable it. Darn :-)

  Only one port has been enabled for the 600n

  Yet once again, I installed Windows 7.

  Put on the CD and installed the drive

  Put the 600n into a USB port and it worked again. Put the 600n into every USB port that I have my laptop. It woked on each USB port

  Installed updates to windows.

  Done another test, and YES it still worked.

  So, it took me several hours to get the thing works, but I'm the thing works a d she works yet :-)

  To install the new Windows is not the way I want to solve a problem, but it was the only way.

  Perhaps my solution is also to you.

  Good luck and let me know if you have solved your problem.

• RESOLVED - unable to enable IPv6 in Windows 7, so unable to connect to the homegroup - ZoneAlarm was the problem

  My problem is that I can't turn on IPv6 in Windows 7.

  My goal was to set up a homegroup three computers so that I can share a printer that is connected to one of them. They are all running different versions of Windows 7.  A desktop computer has created a homegroup, and a second desktop computer connected successfully to the homegroup and can print using the first computer printer.

  The third computer is a portable computer. When you go to the homegroup settings page, it says that the homegroup is available. But this computer is unable to join when you click on the "join" button. The convenience store said IPv6 must be enabled.

  Option is checked in the IPv6 network card settings. (The install button is also active and uninstall is dimmed. I don't understand why this should be as I have read that you cannot uninstall IPv6, if it makes sense for the uninstallation to be grey, why install would be an option? Confusion between.)

  Here is what seems to be the root of the problem. In the registry settings, in the section IPv6 DisabledComponents is set to 255 (disabled). I change it to 0 (all features enabled), but I can't always connect to the homegroup. I restart the computer and the value 0 is changed back to 255.

  I can't activate IPv6, it isn't surprising that the computer cannot join the homegroup as I read that this function requires IPv6.

  Can any expert from Microsoft give me some advice on how to operate the homegroup?

  Thank you very much.

  I have now found the answer to my problem. This is a setting in the free ZoneAlarm firewall. I will describe the solution in the case of meeting other people that.

  I have the default setting of the version of ZoneAlarm is that it disables IPv6 when it starts. (I don't know if it's the same for all versions).

  Although I tried disabling ZoneAlarm (and my separate anti-virus) so he was trying to set up group residential, just turn it off has no impact on registry settings - DisabledComponents is always set at 255 until you change to 0 and, critically, restart the machine. Then, the parameter 0 (enabled) will come into force. Or so it seems to me as a layman.

  But if you did not disable the automatic startup of ZoneAlarm (like me) then as soon as you restart the computer, ZoneAlarm starts too and resets the 255, new registry entry to disable IPv6. If you can't join a homegroup.

  The solution is to open ZoneAlarm and choose firewall, hand and advanced. Then you will see the option to activate IPv6 networks. When I didn't do the notebook had no problem joined the homegroup.

  I don't know why I have the same problem on the second desktop computer. Maybe it's runnning a later version of ZoneAlarm to allow IPv6 - I haven't checked.

  In any case, I spent hours looking for this solution, so I hope that the description above helps someone else that has a parameter of the problem until a homegroup because of what seems ZoneAlarm made IPv6 settings in the registry.

• Unable to hibernate on Windows 7

  I have a Windows 7 that I reformatted recently thanks to the OEM recovery tools. Everything went well... until I realized that I can't Hibernate. Before the reformat the computer hibernated perfectly. This time, when I press "Hibernate", he turns off the screen, the led on the HARD drive for a few seconds (10-15) and then... nothing happens. When I moved the mouse, the login screen appears as if I was locking the computer. I tried to delete the hiberfil.sys file but it says that the file is used any time, what time it is. I cannot hibernate as I used to. Help, please!

  I found the troublemaker. It's Ubuntu. I managed to remove and viola! I can hibernate once more

• message keeps comeing to enable services in windows Security Center, but I can't not error code ox80070422 & ox8100002f what I can do

  error codes ox800704227 & ox8100002f remember to come to the top, what I do.

  Hi Dave,.

  1. when exactly you get error messages?

  2. you did any software or hardware changes to the computer before the show?

  Action Center replaces Windows Security Center in Windows 7.

  Action Center manages firewall settings, Windows Update, software antispyware, Internet security settings, and user account control settings.
  
  Method 1:

  Check if the Windows Firewall Service is enabled.
  To do this, follow these steps.
  a. Click Start, type services.msc and press ENTER.
  b. double-click Windows Firewall.
  c. set its startup type to manual
  d. click OK.

  
  Method 2:

  Error code 80070422 0 x when you try to enable the Windows Firewall:

  http://support.Microsoft.com/kb/2617842

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
  Method 3:
  The ox8100002f error indicates that the backup was successful, but ended up jumping places as he could not locate them.
  Reference:
  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281
   

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• How to enable IPv6 in Windows 8 when it shows that it is enabled

  When I try to connect to my home group I get a message "your network connection must have active IPv6."  However, in the properties of my network it shows that it is enabled.  I disabled my Norton firewall & virus scan but that doesn't seem to be the problem.  I added the DisabledComponenets with the value set to 0 in the registry.  Still get the same message.

  Hello

  First remove what you did just in case it is incorrect.

  Your router and all the computers must be able to IPv6 (hardware, firmware, and drivers)
  to use a homegroup. Check the system Maker (manufacturer of motherboard for customized systems)
  or the sites of manufacturers of real devices to update network drivers. Also check the router
  site of the manufacturer for firmware updated to date. Check their support and ask in their forums for everything
  known issues.

  These are for Windows 7 apply to Windows 8.

  IPv6 FAQ
  http://Windows.Microsoft.com/en-us/Windows7/IPv6-frequently-asked-questions

  How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista.
  Windows 7 and Windows Server 2008.
  http://support.Microsoft.com/kb/929852/en-us

  The homegroup Windows problems (8)
  http://Windows.Microsoft.com/en-us/Windows-8/HomeGroup-problems-in-Windows

  ====================================================

  Check the updates (especially network drivers):

  Check with the manufacturer of system (manufacturer of motherboard for customized systems) updated
  BIOS, drivers low-level chipset and drivers of devices shipped major. Run
  DriverView - value VIEW drivers hide Microsoft - update those without drain in their
  name.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if
  3rd party with their own software and drivers and the other main device drivers you
  a.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">