Enable the VLAN on sub interface internet access but block traffic to VLAN native

Similar Questions

• problem with the yellow triangle without preventing Internet access

  problem with the yellow triangle without preventing Internet access.in across the network!
  all PC go to the internet through TMG and some computers work very well and most of the computers triangle shows yellow and always go online, but the connection it needs to slow down, I do everything from restarting all switches and install new TMG and always exist and place on another line to outside the firewall problem disappear?
  What can I do :(

  Hello
  I advise you to follow the link below for Tech Net where your social networking question will be answered by IT pros.
  You can post/search here
  hope this helps,
  B Eddie

• Windows 7 connects and says "Internet access", but cannot access the internet!

  Hello, please help me with this annoying problem in answering it.

  My PC connects successfully to the mobile hotspot and indicates that he gined Internet access, but when I try to browse the internet (I tried Google Chrome, Internet Explorer, and Mozilla Firefox), or use any application that needs to connect to the internet (such as online games) HE DO FACT NOT WORKING, or SAY "NOT CONNECTED to the INTERNET.

  In the time that each connected device another works perfectly.

  Please when you view this thread the RESPONSE and not SIMPLY LEAVE.

  Thank you to everyone who helps me.

  Thank you to everyone who helped or tried to help me. It if a virus blocking internet access to applications. I now come back to my PC back working.

• Termination of the client PIX VPN and Internet access from the same interface

  Hello

  VPN remote users connect to PIX (7.2) outside interface, but need to have these clients to access the Internet through the PIX outside interface as well. Need this because PIX IPs is registered and allowed access to some electronic libraries. One way would be to set up a proxy within the network and vpn users have access to the Internet through the proxy, but can it be done without proxy?

  Yes, public internet on a stick

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00805734ae.shtml

• My network connection shows no internet access, but I can access the internet

  Hardware: Dell XPS 8300

  OS: Windows 7 family

  System type: 64-Bit
  In the network and sharing Center, it is show the connection between the network of Multi and the Internet has an 'X', but I have full internet access.
  Is there a way to fix this?

  Hello

  I understand that you are able to connect to the internet when your computer showing no network connection.

  1. did you of recent changes to the computer?

  I would suggest trying the following instructions and check if it helps.

  Method 1: update the network driver.

  Steps to update of network driver:

  1. click on the Start button.
  2. in the search box type devmgmt.msc, and then press ENTER.
  3. Select the network card device and right click on it
  4. now, select Properties.
  5. in the Properties window, on the driver tab, click Update driver.
  6. After installing the updates, restart the computer.

  For more information visit: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Method 2:

  Temporarily disable the Antivirus and firewall

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Even IOS VPN Interface Internet Access issue

  Hi all

  I was wondering if there was any equivalent to these orders of ASA 5510 to put on a cisco IOS router 2811.

  Split-tunnel-policy excludespecified

  value of Split-tunnel-network-list LOCAL_LAN_ACCESS

  What I want to achieve is to give internet access to my vpn users without creating a split tunnel, which means the vpn user turns off the Internet on the same interface on that their vpn router ends.

  Is a 2811 for this there docs? I could not find the doc for it...

  TIA,

  -Fred

  Try this link

  Public Internet on a stick

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a008073b06b.shtml#intro

  Rgds

  Jorge

• Why "problem loading page" appears when I try to start firefox? I can access the page relevent medium of internet explorer, but firefox cannot connect to the web.

  A few days ago Firefox has stopped working when you use the shortcut or exe. file. The message http://en-gb.start3.mozilla.com/firefox?client=firefox-a & rls = org.mozilla: en - GB:official appears, even if when I paste this address in internet explore it works. What is preventing firefox to connect?

  One possible cause is security software (firewall) that blocks or limits Firefox without you informing on this subject, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox.

  See Server not found - the problems of connection and Configure the firewall so that Firefox can access the Internet and http://kb.mozillazine.org/Firewalls

• Separate the internet access and VPN traffic

  Hello everyone!

  I have a VPN Client that connect with the office, the vpn works great. Now all traffic, including internet´s access goes through the tunnel. I would separate it, I know I can use a split tunnel, but does not work for me.

  Here is the config:

  internal remote group strategy
  Group remote attributes policy
  value of 192.168.0.11 WINS server
  Server DNS 192.168.0.13 value
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy excludespecified
  value of Split-tunnel-network-list Accesso_Restringido
  XXXX.xxx value by default-field

  Accesso_Restringido list extended access denied object-group ip VPN remote everything

  Any idea?

  Concerning

  KC

  You should ignore the NAT for traffic between the vpn to the DMZ network client

  1 remove the following text

  No inside_nat0_outbound access ip 192.168.0.0 scope list allow 255.255.0.0 10.10.1.0 255.255.255.0

  2. Add the following

  permit dmz_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 10.10.1.0 255.255.255.0

  NAT (DMZ) 0-list of access dmz_nat0_outbound

• How can I identify the program that turns my internet access?

  Normal mode startup I get an IP address from my router but no internet access, cannot ping the router IP address or IP address of another computer on the local network.  I ping my own IP address.  I can access the internet if I start my computer in Safe Boot w/Internet.  I'm guessing that a program is power off or blocking the ability of network cards to talk beyond my computer during startup.  There are system variables, I can look at, or a list of programs that need to run, so that I can turn off others and test to see if the network works? This problem affects both my Wi-wired connections and my computer.  They both Act the same way.  I even installed a second adapter USB wireless as a test and it also reaches the router initially and then won't talk to her after the security negotiation.  McAffee software detects no virus on the system and no virus found or deleted in the previous analysis of the reports.  The problems started when I rebooted my machine to get the sound to work.   I had been running without the speakers connected and found the sound does not when I plugged.   The only known software update was of Flash Player, but I see no way out with a restore point, which is days of May and was generated from a Windows Update.  Everything worked fine after that Windows Update including the speakers.   I need help, or will be forced to recreate the image on my machine, I want to avoid.

  McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• My laptop shows "no internet access", but it is connected

  My wireless connection shows that I am connected. But it also shows the status of "no internet access. I restored the system to some time earlier (I mean just two days) and it worked fine. But after the automatic updates Windows starts by showing "no internet access once again"... Can someone help me out here?

  Thanks friend! I think that KB2705219 might be the cause... I restored it once and stopped automatic update and its job well now... lets see...

• How to set the vlan native on a virtual machine in vSphere when you use the 1000V?

  Using the General switch original vSphere, we put VLAN native by VM by setting the VLAN 0 d.

  How do we set VLAN native for a virtual machine, if the virtual computer is connected to a 1000V? I heard that is over, we can use VLAN ID 0?

  Same way as you would on any Cisco switch.

  Add this command to your profile of uplink port:

  switchport trunk vlan native X

  Keep in mind there is no VLAN 0.  VLAN '0' is just how vmware means the VLAN untagged.  There are valid in accordance with the standard 1-4095.

  Kind regards

  Robert

• The remote VPN Clients and Internet access

  I apologize in advance if this question has already been addressed. I am currently using a PIX Firewall Version 6.1 520 (2) running. I have several remote users that VPN for the PIX. Once the VPN tunnel is started, they are more able to connect to internet from their local computers. Is there a configuation on the PIX that allows remote users to have access to the internet when you are connected to the PIX.

  TIA,

  Jeff Gulick

  The Pix does not allow traffic enter and exit on the same interface. Therefore, a VPN user cannot access the Internet through the tunnel. If you use the Cisco client, enable tunneling split so that all traffic through the tunnel.

  If you use PPTP, you can turn off the option that makes the remote network, the default gateway. However, local routes should be added to these clients when they connect.

  Or you can use an additional interface on the firewall. One that puts an end to VPN tunnels and another providing for Internet connectivity. In this way the traffic is not enter/leave on the same interface.

  Of course, it is preferable if the customer Internet traffic does not go through the tunnel. It wastes your bandwidth and has security problems as well. I suggest you use the client to Cisco and the split tunneling.

• Refuse the selected inside address for internet access

  What is the best way to deny IP selected inside the addresses (PCs) access to the internet router in a PIX 506? Thank you

  Lori a

  Just use an ACL on your inside interface like so (this arretera.100 et.101 hosts out):

  > access-list out refuse host ip 192.168.1.100 everything

  > access-list out refuse host ip 192.168.1.101 everything

  > outgoing access-list allow ip 192.168.1.0 255.255.255.0 any

  > Access-group out in the interface inside

  In addition, you can change the following:

  > global (outside) 1 205.238.220.19 - 205.238.220.22

  > nat (inside) 1 0.0.0.0 0.0.0.0 0 0

  TO:

  > global (outside) 1 205.238.220.19 - 205.238.220.21

  > global (outside) 1 205.238.220.22

  > nat (inside) 1 0.0.0.0 0.0.0.0 0 0

  cause what you will allow only 4 outgoing sessions, only one user can use up to go to a web page. The second version will be PAT connections using the adresse.22, which will give you a 65 000 or if additional connections coming out.

• Disable the CS5 Web Premium without Internet access

  I have a laptop that does not connect to the internet, what keeps me off. How can I disable my copy of "CS5 Web Premium" without access to the internet for this laptop?

  Hi Erskin,

  Please refer to:

  Enable and disable Adobe products

  How can I disable my Adobe software?

  Concerning

  Stéphane

• How to enable the modem to connect to internet

  Hello

  This my first time using, hope so I do everything correctly

  I bought a laptop (windows vista) last week, I had to fix it installed, netgear (?) and the belkin usb network adapter.
  The laptop works fine and I get my emails.

  Another PC (windows xp) used conect to internet and I do not also receive e-mails from my son (who believe, I don't want to read).

  I looked on my control panel and my internet connection says disabled modem (which is) but what do I need to connect the pc to the floor to the internet.

  Hope someone can understand this and is able to help

  Thank you

  Your post is a little confusing.

  In any case, if the modem is not enabled then trey for this in Device Manager.
  In addition, you must check if the modem driver has been installed correctly.

  For the first, that's all I can suggest.