Enabling access to outside SMTP server

Similar Questions

• Configuration of roundcube SMTP Server 5.0

  Hello

  I am unable to send emails from my internal network of Roundcube after update of OS X El Capitan and Server 5.0. ( It works fine from the outside LAN)

  I have to update the SMTP settings in the configuration of Roundcube?

  Also, I find not all configuration settings or Roundcube files in OS X 10.10.2

  Any help will be appreciated.

  Thank you

  RoundCube allows any user to use a web browser to access his mail. It has no separate smtp server, but use the one on the server to send mail. So you must enable the use of these in the configuration of the server after the installation or update.

  RoundCube is normally installed in/usr/local/topicdesk/roundcube or/usr/local/roundcube if you want to look at the configuration. Note that / usr is a hidden directory.

  Leo

• WebEx meeting Server 2.0 - setting up the smtp server

  Configuration of SMTP server for the Webex Server 2.0 meeting, the manual States:

  Possibly to enable authentication of mail server, select the server authentication enabled.

  If you enable authentication, enter credentials user name and password required for the system access to the e-mail server of the company.

  System emails are sent by admin @. Make sure that the mail server can recognize this user.

  -What exactly does "ensure that the mail server can recognize this user"?

  • I have to configure the admin @ account on the SMTP server? (customer can configure only e-mail as account [email protected] / * /)
  • Or admin @ is the property of «of» the mail and SMTP server should accept this property 'from'?

  -What happens if the user name and password are not specified?

  Thank you

  Here you have two options:

  (1) either use authentication: you must create a user account in exchange.

  (2) do not use authentication: let disabled authentication and configure exchange to relay emails from CWMS.

  "-What exactly does 'To ensure that the mail server can recognize this user'"?".

  "- What happens if the user name and password are not specified?"

  This means that if you enable authentication - create a user account for CWMS in Exchange. If this isn't the case, then have the exchange server that is configured to relay CWMS emails. Its simple allow only the ip address of CWMS in Exchange to accept and relay e-mail.

  If it does not means that you don't want to receive emails from CWMS and as you know email principal means of CWMS communicate with users.

  Simple way is to leave off authentication and configure the relay. I did this couple of times in the past without problems.

  -Terry

• Locking ESXi 4.1 mode access confirmation no access to the vCenter Server

  Hello

  ESXi 4.1.  I see options in conflict with access to a crowd that had lockdown normal mode activated via a server vCenter VM on a host in the cluster.  The vCenter server that sits on one of the hosts in the cluster lockeddown then became inaccessible or unresponsive connectivity wise.  So no connectivity between vCenter VM or VM vCenter and hosts.  Is someone can confirm if you can connect to this host lockedown by DCUI with root and disable lockdown configuration to allow the vSphere client to then connect to the host with root and troubleshoot the server vCenter VM?

  I read in some messages that this is only possible if the vCenter VM is in place and the communication to the host.  I also read that it is possible no matter what the State of the vCenter server once Total lockdown (disabling DCUI) is not enabled.

  I have this reference of the 'The new lock in ESXi 4.1 Mode' blog http://blogs.vmware.com/vsphere/2010/09/the-new-lockdown-mode-in-esxi-41.html

  "With active locking Mode, the only direct access to the host that remains open is through the DCUI. This allows to perform administrative tasks limited outside vCenter Server, such as restarting the management agents and the display of the log files. In addition, you can also disable Mode of Lockdown since the DCUI. This can be useful if vCenter Server is down or unavailable, and you want to return to a direct management of the host. Normally, without locking Mode, any user to the Administrator role can open a session in the DCUI.  However, in lock Mode, the root password is necessary; no other user can connect.

  Can anyone confirm.

  Any other person who may not be sure these questions, I can confirm that with root credentials, you can connect to the host directly and disable the lock mode regardless of the availability of vCenter.  Only if the Total lock mode turned on, or should I say DCUI is disabled, then you have no choice but to go through vCenter or reinstall and reconfigure the network.  VM would be always available if local or have to be reassembled and re inventoried etc.

• Unable to connect to an smtp server

  My OS is ubuntu LTS 14.10, I use Thunderbird version 38.4.0.
  I have 2 accounts, a gmail account and an e-mail office365 account.
  Until yesterday, I could send and receive emails on both accounts, however now it fails with the following error:

  The message send failed.
  The message cannot be sent because the connection to the server failed outgoing (SMTP) smtp.googlemail.com . The server is may be unavailable or refuses the outgoing (SMTP) server connections. Check that your outgoing (SMTP) server settings are correct and try again.

  (Or a similar message when connecting to the server smtp office 365.)

  I restarted the computer, confirmed the address of server, reset passwords, confirmed that I can ping the servers.

  Any help would be greatly appreciated.

  Thank you

  Chris

  The parameters of your server for Gmail seem good. I'm not really familiar with Office365, but they are probably ok as well.

  Are there external firewall or proxy, you have to go?
  You have all this computer's Internet access?

  What is suspicious, that the two accounts are not at the same time. So my best guess is that the cause is rather external and not Thunderbird.

• My SMTP server password stopped working

  I use Firefox and Thunderbird and up-to-date. Now, when I try to send an email, I get a message "connect to the SMTP server of . GMail.com failed. "This looks like a Thunderbird message. I've had trouble now with several changes to my GMail account while trying to solve the problem, but none of my edits have corrected this situation. I tried to activate IMAP (I use POP3), switched on shed 2-step verification and reset my Google password several times. Sometimes I get an opportunity to enter a new password to access smtp and when I paste that I think to be correct, no still no access. Help.

  I use Firefox and Thunderbird and up-to-date.

  Please confirm your version of Thunderbird.

• Windows Mail together with Windows Live Mail - need POP3 and SMTP server information

  Unable to get my Windows mail to work with my Windows Live account. I need the name of the POP3 and mail out SMTP server so I can get it set up. Surely Microsoft would since both are Microsoft products. Thank you.

  Unable to get my Windows mail to work with my Windows Live account. I need the name of the POP3 and mail out SMTP server so I can get it set up. Surely Microsoft would since both are Microsoft products. Thank you.

  Here's another one you can read:

  How to access free Windows Live Hotmail in Windows Mail
  http://email.about.com/od/windowsmailtips/Qt/et_get_hotmail.htm

  Just one thing : when it comes to enter your hotmail address, use afalse address, do not use the word 'hotmail '.
  When everything is done, and Windows Mail says it's finished, go back and erase the false address, re-enter the real e-mail address.

  t-4-2

• PIX 501 to allow access to the ftp server

  Hello

  We have a public ip address of the pix 501 and the other, I want to access the ftp server on the internal network from the outside. I tried to configure the PDM by a static nat, which translate to the address of the FTP to the public address, but then none of the stations networks could out - how can I configure it?

  I would also like to know what ports should I open on the acl for access to the ftp server.

  Thank you, daguech

  Yes, sorry... You must use the unique host for addresses command. The access list is applied to your external interface?

  for example, the command would be:

  Access-group acl_out in interface outside

  Also, can you connect to the local ftp server behind a firewall?

• No SMTP server specified for intrusion via CFMAIL.

  Hello
  
  I am trying to run this tutorial and I get this error.
  
  No SMTP server specified for intrusion via CFMAIL.
  
  
  
  What should I do?
  
  The web site, you access has met an unexpected error.
  Please contact the site administrator.
  
  The following information is for the creation of Web sites for debugging purposes.
  
  Error occurred while processing request
  No SMTP server specified for intrusion via CFMAIL.
  In order to send SMTP messages, ColdFusion requires that a default SMTP server is specified. You can set the default SMTP server by using the page of the ColdFusion Administrator's e-mail. Alternatively, you can make sure that all tags intrusion via CFMAIL have a SERVER = attribute provided. In this case, no SERVER = attribute was provided and no default SMTP server setting has been specified.
  
  The error occurred in C:\CFusionMX7\wwwroot\CFIDE\cfmbible\ch31\1-cfmail-simple.cfm: line 3
  
  1: <! - email can never be sent if the email in the From attribute below is not changed to a valid value for your mail server - >
  4.
  3: intrusion via cfmail = "[email protected]" subject = "[email protected]" = "Thank you for having accepted" >
  2.
  5: Thank you very much for joining our service. We invite you to visit the other links on our site, including http://www.yourdomain.com/somedir/somepage.cfm
  
  
  
  --------------------------------------------------------------------------------
  
  Resources:
  See the ColdFusion documentation to verify that you are using the correct syntax.
  Search the Knowledge Base to find a solution to your problem.
  
  
  Browser Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
  Remote address 127.0.0.1
  Http://127.0.0.1:8500/CFIDE/cfmbible/ch31/sponsor
  Date/time 16 May 07 14:06
  

  After you connect to the CF administrator, click on mail. on the mail page, you will see an input box. If you have an address for a mail server, then enter. otherwise, type 127.0.0.1.

  Good luck
  Thim

• How to determine the outgoing (SMTP) server settings?

  ErrorMessage:
  The message send failed.
  The message could not be sent to the help of Outgoing server (SMTP) smtp.uniq.edu.ht for an unknown reason. Check that your outgoing (SMTP) server settings are correct and try again...

  How to do this? The parameters are defined automatically. Maybe Thunderbird should check its database of the email provider.

  It would appear that the outgoing serer must be
  Outgoing mail server: (SSL) box810.bluehost.com (server requires authentication) port 465

  THEN right-click on the account in the list and select settings
  Open the entry in the list of accounts for the outgoing (SMTP) Server
  Select your outbound service, and then click on edit.
  Update of the parameters specified by your provider.

  Now, I got my information on page 15 of this document.
  www.uniq.edu.HT/ressources/20130510201220.pdf

  Thunderbird information begins on Page 9

• I would like to know how to prevent messages sent to be registered on the SMTP server

  Currently, my Thunderbird client saves a copy of all messages sent to the folder "sent", as expected. All sent messages are also stored on the Server SMTP (G-Mail in this case). To avoid having to delete them manually, I want to warn the outgoing message to be stored on the SMTP server in the first place. Currently, my account of Thunderbird for Copies and folders settings has a check mark next to the option 'Other' with a destination of the folder option sent in Thunderbird. I don't see any other parameters that could control how sent SMTP mail server handles. I use the POP service only with the G-Mail Server. What settings should be in place to prevent messages accumulate in the folder "sent" on the SMTP server account?

  I think I can now answer my own question! The question turns out to be a g-mail not delivered not a factor controlled by Thunderbird.

  Apparently g-mail can automatically a copy of all mail sent by SMTP service one account. It's a "feature" that cannot be disabled! A workaround seems to be to set up a filter in g-mail account settings for all mail with an address corresponding to your own email address and send the message to the trash folder. Items in the Recycle Bin are automatically deleted after 30 days. Google prevents the rule 30 days being modified by measure of security, but at least trashed messages for irrevocably removed in a month.

• Top SMTP server

  Bij het van een mail vraagt een SMTP Server top Mozilla question. Waar kan ik said vinden? Said is not sinds 12 augustus, voorheen geen problems.

  Hi Geert,

  I probeert mail you versturen via the SMTP server of van amx.signet.nl in dat lijkt een andere provider dan die sculpt I I mail ophaalt.

  Kan I Extra-> Accountinstellingen lounge en bij dan links onderaan het zit op dzielnica (SMTP) server, will. Zie I right dan volunteers verschijnen SMTP servers? Zo ja, dan moet I links op I e-mailadres will en dan right weer onderaan bij dzielnica right selecteren Server (SMTP) server...

  Hopelijk approached the dat.

• failed to connect to the SMTP server

  I can't send mail in ThunderBird sometimes. I use 31.5.0 version but I was wrong this problem in older versions either.

  It is said:
  "The message could not be sent because the server name of the SMTP server connection failed. The server is may be unavailable or refuses the SMTP connections. Please check that your SMTP server is correct and try again, or else contact your network administrator. "

  Sometimes, every time. But really bad situation for me. It happens with hotmail, gmail and with my own email accounts. For the time being. It sends to all accounts except for Hotmail. I tried not in http://kb.mozillazine.org/Connection_errors_-_SMTP , but there is no change.

  Could you help me please abou this problem?

  Is - this smtp.live.com which does not send?
  Try this:

  SMTP.live.com / 587 / TLS

  Authentication the same as POP3 (username and password)

• The search for my name of SMTP server, I don't have a number

  Hello
  I'm trying to configure my e-mail account in my accounting program (Big Red Cloud) so that I can send emails such as invoices. The installation program asks the SMTP settings you but will not accept those given to me in Thunder bird (Tools > account settings > outgoing (SMTP) server support crowd said they can't help but I need to get my e-mail provider good server name.)
  Unfortunately my screenshot will not download, but I hope that I can help in any case

  Kind regards
  Elin

  Your email provider their name server and affects ports. They can provide this info.
  Although if Thunderbird OK send that info should be on the SMTP configuration page.
  Tools-account-outgoing server (SMTP) settings

• Unable to connect to smtp server

  Thunderbird worked fine yesterday but when trying to send a message this morning it says it cannot connect to the smtp server and put my password that I did - but it makes no difference.

  Thunderbird continues to operate correctly on my wifes computer and if I connect to the blank media, I can send a message from there, but still my computer it will not send and I get the same error.

  I tried to restart my computer completely and thunderbird, but it makes no difference

  Okay people, there jujst started working again - what is happening here that my wife has sent all the morning OK but mine has just started a few minutes there are - and they are both the same SMTP!