Encoder Media CC all black screen

Similar Questions

• I need help on my macbook pro i5 13inch mid 2012 model when I open all black screen

  I stopped just my macbook pro, when I open all the black screen but it has power... can I bring it to apple store to fix. How will they charge?

  The cost will be dependent on what may be wrong.  It could be the GPU or the screen is who is several hundred dollars.  It could be the connection of the screen, which will be very little costly to repair or even for free if only the connection is loose.

  Foe a final quote, bring the product to an Apple store genius bar.

  Ciao.

• All black screen with a mouse that is visible on the Satellite

  I have a toshiba satellite laptop 2 years old, and it works pretty well so far (battery replaced in July).

  Yesterday, I was using it as usual, then close the lid and went for a shower.
  20 minutes later, I came back, it works again, and he went to a black screen with a visible mouse.
  However, none of the keys produce any response and the mouse not to slam.

  I tried several times it works and stop.
  Twice he went to a white screen with all the icons of bottom bar of size reduced and grouped in the upper corner, as well as a few photos, that I had just downloaded.

  A few forums I saw answer other users have suggested using the vista disk to restart, but I'm on study abroad for a year in the United States and thus didn't drive.
  In addition, these users reported a collision until it happened.

  I'll keep on at the current time to turn off in the hope that it will come back to life after a stop appropriate through loss of power.

  I would be really grateful for any suggestions you can give me, thank you.

  Hello

  I put t know which model of laptop you have, but the first thing that you should try the new installation of the OS.
  You don t have any installation disc that's pity
  However, you can try to start Notepad using a Windows live CD.
  This system is called BartPE or WinPE
  Google for it

  This don t systems must be installed on the HARD drive, it works like a linux live cd you boot using such a disc and a few sec later you get access to the HARD disk

  I think it is good idea to check if the laptop is ok

• Media Center is black screen when it is full

  Original title: black Media Center screen

  I opened my icon for Media Center, and he had a very small window, so I enlarged it and now it does that to open a black screen and nothing else?  I have to close it with Ctrl-Alt-Del to get out.  Any ideas on how to reduce it to a small screen?

  Update your graphics card driver.

  Visit the manufacturer's Web site to download and install the latest graphics driver.

  S.Sengupta Media Center MVP

• C40 selfview shows all black screen

  When I start the codec I don't see an orange light and the selfview box is all black.  My participants on the end to see me actually good.  Any suggestions?

  Brad,

  First of all what you should check if the device shows connected when you SSH into the codec, you can type the following command and see:

  XStatus camera 1
  

  * the camera 1 s: true

  * s camera 1 HardwareID: "50000000.

  * 1s camera manufacturer: "TANDBERG".

  * 1s camera model: "PrecisionHDMC 1080 p 12 X.

  * s camera 1 ID of the software: "S01718 - 4.0FINAL [ID:40075] 2012-01-25»

  * SerialNumber 1s camera: "A1AB40D00321."

  * s camera 1 IpAddress:

  * s camera 1 MacAddress:

  * s camera Position Pan 1: 400

  * s camera 1 Position Tilt: 60

  * s camera Position Zoom 1: 0

  * s camera 1 post Focus: 4576

  * s camera 1 capacity Options: 'ptzf '.

  * s 1 Flip camera: 'Stop'

  * end

  Then check if you get the power of the camera HDMI:

  XStatus //hdmi
  

  * s video input HDMI 1: true
  

  * s video input HDMI 1 SignalState: OK

  Thirdly, check what is your main video source on:

  hand xconfig
  

  * xConfiguration c MainVideoSource of the video: 1
  

  * end

  Hope that answers your question.

  Kind regards

  Saint André

• Black screen when I use WMP mode full screen

  Hello.

  When I watch TV on the windows media player so I have the problem. If I go to full screen, it's all black screen but I can hear sounds.

  I have my laptop for 4 months, but everything was ok.
  This problem started 2 days ago maybe earlier. I think I did something but I don't know what and I can't fix it.

  Could you help me please?

  Thank you

  If this question began to tow days ago then I would recommend defining the operating system system early.
  Then check if it works

• Windows 7 black screen

  When running the few games I get the Error Message "" Name of the game"has stopped working.

  Please help me this.

  Hi Chakravarthy.l,

  1. What are the games that you are having a problem with?
  2. deal with all black screen problem? If yes then when exactly this question produce?
  3. don't you update the latest drivers for the display adapter on your computer?

  If you are able to boot to the desktop, then I suggest to update the latest drivers for your computer display card and check.

  You must be logged on as administrator to perform these steps.

  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. in the Device Manager, find the graphics card and then double-click the device name.
  c. click on the driver tab, then click on set to update driver and follow the instructions.

  Reference:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly 
    
  Note: try to update to the latest patch or updates for the games of the manufacturer's Web site.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Black screen HELP!

  I just got Intel 82845 G/GL/GE/PE/GV for my Windows XP 2000 * and I was trying to speed up my display of punk with the resolution and I hit a tree stump. I set my resolution to 800 x 600 and my screen restarted (as usual), then, when I thought that my display will return to the top, it does not. I can't visually boot XP, loading menu pop-up, then when its made, closes, then all black screen right. WHAT I'M DOING!

  Start in safe mode. Open Device Manager and right-click on Intel in the display section. Choose uninstall, and check the box to delete the driver also. Then click on ok or whatnot to do.

  Restart in normal mode and let autoscan Intel website to install the latest driver for you.

  http://Downloadcenter.Intel.com/default.aspx?lang=eng

  Enjoy.

• ACPI.sys corrupted at startup disk on the black screen windows

  When I start my computer normally all I get is a black screen with my cursor on it before I reach the log on screen (but after normal of the windows startup process).  I tried Ctrl alt del and nothing happens, there is no beep or anything along those lines is.  I tried safe mode, but exactly the same thing happens, I get a black screen with white inscription around the edges, telling me that I'm in safe mode and my slider is still there and moves, but other then that is all black screen.  Ctrl alt delete doesn't work or any other key press on that I skipped.  I put in my windows XP CD and he would try to repair or reinstall the operating system but when I boot on the CD, it starts to load normally and then stops and gives me the error message "the acpi.sys file is corrupted.  Press a key to continue' when I press any button it goes upwards and brings back me to the black screen with the cursor.  I tried to go into the BIOS and turn off acpi but the loading and the startup disk produce the exact same results any bios settings I try.  Any help would be appreciated, either for obtaining windows at startup after the black screen without the startup disk or get me to the point where I can still use the CD (which I should mention that I have used before and it worked well, is the one responsible for my windows XP in the first place and who is clean and scratch free).  Thank you for any help or advice.  Oh, and I must add that I have installed any new software or whatever it is like in the last month or two, so I don't think it is something like that.

  Hello usernamerandom,

  Take a look at the sticky thread depending on which was released 21:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/why-do-i-have-a-black-screen-when-i-start-Windows/ddf978da-4ba1-49dc-8844-2407c3fc1c82

  Best regards

  Matthew_Ha

• Display screen is reversed: black screen with white letters

  My screen goes black with the letters white and blue; very difficult to see/use. My email is all black screen, white letters. How can I change into white, black letters?

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  http://www.Vistax64.com/tutorials/83824-color-scheme.html

  How to change the color scheme in Vista

  See you soon.

  Mick Murphy - Microsoft partner

• Black screen on startup - Windows 7 Professional

  I recently installed Windows 7 Professional on my laptop MSI, 4 GB of RAM, processor Intel (r) Core (TM) 2 Duo CPU, 32-bit operating system, Nvidia GeForce 9600 m GT 512 MB.

  When I turn it on, there is all black screen. I pull the battery (until I discovered F8) and it starts in safe mode with network. Then, I reboot safe mode and windows load correctly. Two days before the blackout, the cursor would freeze too.

  Note I've read related topics, like the one in which it is suggested to disable the graphics drivers, and I recently downloaded new ones from Nvidia, but it started two or three days later, so I doubt it has to do with the graphics drivers.

  Should I try with the system restore or perhaps reinstall Windows?

  Yesterday, I found and installed both updates Optional:

  1 Realtek driver update for Realtek PCIe GBE Family Controller

  2 update for Windows 7 (KB976422)

  In any case, this morning, the windows loading straight, so with this optional support, the problem could be solved. I hope that nothing will change in the future, however.

• Encoder Media won't save destination output file

  I'm running on a rugged PC.

  I've always had my encoder media dump all my makes it in the same folder.  For no reason I can understand, gives ME my destination output file by automatically turning off that box in my Preferences each time menu that I send a video for the first rendering.  I then go back to preferences, select the check box and specify my destination.  To test this, I set my destination then close me.  I opened ME and the destination is always there.  When I send a file of first for ME, the destination of the file area is now disabled.  Am I missing something simple here?  The question is perhaps something first?

  I had a separate issue with the titration in the first module not opening any more.  This issue is still unresolved, but a member of Adobe suggested I have delete the workingset.prsl.  This ME issue has been a problem since then.  I can't find where the problem is.

  Any help would be great.  Thanks in advance for reading and helping.

  T

  What version of Adobe Media Encoder and Premiere Pro are you using?

  You could try running SOUL alone without running first.  Now please change the destination of output in preferences and then leave the SOUL.  This makes the change lever?  This destination is used when you import directly files in the SOUL.  Please note that this output destination is replaced by a destination specified in the parameters of Premiere Pro export dialog box before queuing of SOUL.

• Media Encoder black screen?

  Hey guys,.

  We had the strange error with Media Encoder lately. When we open and try to do something with it, it opens just a black screen. Can't see anything. Restarting the machine. No luck. Indeed, we cannot export anything through Media Encoder at all.

  Someone at - it similar problems? Attached are some pictures.

  

  Hi ZippityBop,

  It could be a problem because of a corrupt Workspace.

  Try this:

  Open Media Encoder, click window > workspace > Reset "Default Workspace"

  Let us know if this is useful.

  Thank you

  Ilyes Singh

• my player windows media apart when I try to play the video the sound works but there is no picture just a black screen and all my music files are there and play very well sound just video that gives trouble?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: my Media Player does not work when I play video all I get is the sound, the screen is just black hear any picturedoesn can't if it's a DVD or a download on the internet its just sound and a black screen?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  Hello
  
  1. have you made changes on the computer recently?
  
  Method 1.
  Change hardware acceleration
  You can try to change the hardware acceleration in the middle and check (you can try another level too.)
  a. right click on a space empty on the desktop.
  b. go to the resolution of the screen.
  c. click Advanced settings, and then click the "troubleshooting."
  d. set the hardware acceleration in the middle. (here you'll get the only option your video card sound support).
   
   
  Method 2.
  a. you can also check that Windows is up-to-date to check updates for your hardware.
  You can also run the difficulty below that diagnoses and identify codecs that can cause windows to become unstable or stop responding.
  http://support.Microsoft.com/GP/video_freezes_or_crashes
   
  b. if the problem persists, you can check the latest video card driver provided by the manufacturer of the PC that is compatible with Windows Vista is installed.
  You can also check out the article below which explains to update hardware drivers.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
   

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Compac cq62: downloaded windows 10. Now I have a black screen and the caps button continues to blink. All the answers.

  Downloaded Windows 10. 1 week later, I have a black screen. When I turn on the power to all I get is a flashing caps button one am not able to connect. Ilha a Compaq cq62 model.

  I have seen this reported, and the response is not good, sorry:

  "Problems of upgrading Windows 10: black screen after update (new).
  Some users taking advantage of the Windows 10 upgrade are the conclusion that once the completed upgrade their device just gives them a black screen and does not start.
  Microsoft is still working on a fix for this, but it's not a way to avoid it now. Worse, it seems that the problem that happens on multiple PC configurations. For now, we can only suggest using the utilities provided with your backup device and create some external media backup before starting the upgrade in case that happens. If this happens and you live near a Microsoft Store, make an appointment with them to have your device looking if you experience the problem. Some reports (such as those of our comments) indicate that disabling anti-virus programs before performing the upgrade prevents this issue. »

  http://www.GottaBeMobile.com/2015/07/30/7-Windows-10-upgrade-problems-how-to-fix-them/