Encrypted RBACx utility for password change

Similar Questions

• every day, I find my password for hotmail changed / broken

  every day I find my password for hotmail changed / broken. I answered my question and change it again but it again.i do not want to disable my account however of the changes... What can I do

  Be sure to change any answers/questions you can use to reset the password and all the e-mail addresses that you entered alternative.

  Change passwords on accounts that use the same password for your Hotmail as well.

  Could be that a person is reset using the mechanisms you configured and have not changed (or they have configured to send emails besides as well.)

• I need the Md5 algorithm for password encryption adf

  Can someone provide pointer how to use the algorithm Md5 password encryption for the adf

  Ah, database 11g is great.
  But it does not help you. In middleware, alias in a managed Bean of ADF you must use the Oracle Security Development Toolkit libraries to encrypt the password before storing it in the database. Traffic between the middleware and database is not normally encrypted and readable for all network sniffer.
  When the user connects, you can use a similar mechanism to compare the encrypted password.
  The other solution would be to use an LDAP server for the user/password information (WebLogic has a built-in and very good for small environments). No encryption necessary, as does the LDAP protocol.
  Since you don't mention the middleware you use, here is the link to 11g of BCI for the tool box: http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e10668/toc.htm

  HTH,
  -olaf

• Reader of encrypted mail stopped asking password

  Just noticed this. I encrypted external drive, just to see how long it would take (19 hours). When I restart or start since the closure, even though I have an automatic connection set, he would ask his password to mount the drive. It is most requested. It is always encrypted according to the Finder and disk utility. It can be installed also. I am not sure when it stopped to ask the password but it may have started with the 10.11.5 update.

  Any thoughts?

  I had my external hard drive USB encrypted using FileVault for several years and I don't remember that he never asked the password when mounting the drive. I think that it is stored in Keychain Access to connection > passwords > [player name]

• Phoenix-AwardBIOS CMOS Setup Utility request password it says invaild

  my ex-friend has something to my computer then took it attaches from his friend-friend and when I got back the name of the system is changed, I think my proccessor changed because all my pictures have disappeared and other pictures are in my computer when I press F10 when I turn on the computer as Phoenix-AwardBIOS CMOS Setup Utility request password it says invaild so I don't know that it has been changed. so my question is how do I get control of my computer again and go to the BIOS CMOS Setup on my computer utility?

  You can check with the motherboard manufacturer for instructions to reset the BIOS password.

  "About questions about hardware BIOS password reset, we ask that you direct customers to the appropriate resources on the sites of manufacturers of equipment for the correct procedure."

  Maintaining secure passwords - Microsoft strategy on getting around passwords:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• WebLogic admin user password change without disrupting existing users

  Hi people,
  
  As a business strategy, we need to change the password for the admin user in weblogic after a specific period of time.
  Please let us now how can we who without losing other existing users in "My Kingdom."
  
  I understand that we can use the weblogic.utils.security.AdminAcoount utility to give the new password, which will create a new file DefaultAuthenticatorInit.ldift in + < area-home > / security + record (according to Doc ID 1082299.1).
  The password will change, but the users in "My Kingdom" will be lost. (there are a lot of users and it is an environment of production also hobbies out of question)
  
  Is it possible that we can maintain users and still make the password change?
  
  See you soon,.
  Carole

  Once you DefaultAuthenticatorInit.ldift create a new file, any existing information will be lost.

  There is not another way, we can get the previous users.

  If you have the previous ldap/data directory, then we can have a chance.

  Otherwise, we don't have an option to recreate the user.

  We have an option to import/export security relams users, but this is before recreating the DefaultAuthenticatorInit.ldift

  Hope that answers your question.

• Thunderbird, constantly asking for passwords by e-mail

  Thunderbird has worked for years OK but recently decided to ask for passwords of e-mail, and then ask again, several times, even though I told it to remember using pw Manager. When pw is given, he just keeps asking until I have abandon. Receives emails from Gmail, but I can't send Tbird. No problem with gmail itself as I can connect directly and send and receive mail, but then I get a message from gmail on Tbird telling me that I just connected via my browser. All very disappointing.

  most common cause defective or reach products anti antivirus.

  Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.

  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

  The other option is that your provider has changed the parameters required to connect.

  Please add the troubleshooting information to your post
  To find troubleshooting information:

  • Open the help (or click Help three-line-icon and select)
  • Choose troubleshooting information
  • Use the copy button in the Clipboard to select them all. Do not check box "include account names!
  • Paste this into your post.

  Please post back with that information and any other questions you may have.

• Repetitive requests for password

  I use AOL mail. Thunderbird has recently begun repeatedly asking for passwords, even if they are registered. Sometimes clicking on try again or x'ing out seems to let go of the front. I go to pop IMAP so don't know if that's part of the problem. It happens randomly and especially if I select a saved folder. I even deleted Thunderbird and related files appdata and did a new download to reinstall. The problem still occurs. I experienced it with my laptop so I think it's a problem of Thunderbird, but must cease to use Thunderbird if it continues. Wouldn't do that I have used the program for years and have really enjoyed.

  I think I solved the problem. I started to think that if the retry might work after a while then Thunderbird was perhaps not allowing enough time for AOL to connect and answer. I opened the configuration manager and looked for a timeout entered and found that mail Server timeouts have been all set to 29. I doubled all 60 and Thunderbird seems today is behaving properly.

  As this is a recent problem, I don't know if the response time of AOL has slowed or if a recent update to Thunderbird changed the default value of AOL. Anyway, I think that the answer so for Mozilla increase the default time-out for AOL e-mail.

  Thank you for the reply christ1. It does not solve the problem, but it did get me thinking about the question of speed between Thunderbird and AOL and this led me to the solution.

• That the restoration of a backup time machine, a previous password change?

  That the restoration of a backup time machine, a previous password change?

  It could, if the last backup was performed before the change of password, and she understood this password file.

  But if you are missing a password, see this article on the search for your password with the keychain:

  Cess.html http://www.Macworld.com/article/2013756/How-to-Manage-passwords-with-keychain-AC

  The fact that Time Machine does not have backed up prior to the change, or discarded a way to backup older you may have missed an opportunity to save, if you have changed it.

• Problem restoring last Session in Firefox. It restores the last session without asking for password

  whenever computer stops because of the cut to the top or any other reason while you work in Mozilla Firefox as the use of Facebook. When you turn on the computer and open Firefox it stores the session, without asking for password or username that the effects seriously privacy.i has been using Facebook on Mozilla and my computer shuts down after a few minutes, another has turned on the computer and it went into my account on Facebook because of the last session of restoration. Please, do something about it. This is a larger problem in Firefox

  You can set the browser.sessionstore.privacy_level pref 2 (never) or 1 (no HTTPS, default in the Firefox 3 versions) on the topic: config page to disable the registration of cookies via session restore.

  • http://KB.mozillazine.org/browser.sessionstore.privacy_level

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.

• Help for tone control utility for Windows Vista x 64

  Hi, I have a HDX X 16-1375DX .

  I change windows and I can not find: Tone Control Utility for Windows Vista x 64 Driver (this package provides the utility of the tone (Bass/Treble) HP control.

  Please help me find that.

  Thank you

  When Vista, the software is in the Media Smart Smart Menu. This version has a fix for the bass and treble

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-82360-1 & LC = on & DLC = in & CC = US & os = 2100 & Product = 3979260 & sw_lang =

  If you upgraded to W7 so see this thread.

  http://h30434.www3.HP.com/T5/operating-systems-and-software/HDX16-buttons-in-Windows-7/m-p/154571#M22986

• Windows security credentials, ask for password.

  Since installing Windows 7 I wonder for passwords security credentials window. I don't put passwords. I can't publish expression will not deviate the cause of web.  Is there a way of either he needs to turn off the information correct installation?

  I think my solution is not to use the http or ftp command and it seems to work.  I was also able to change permissions where can register change now-thank you

• Windows 7 does not ask for password when password protected sharing is on.

  Hi guys,.

  I'm no stranger to permissions etc as I work in it, but it confused me after 4 hours of messing around.

  I'm trying to make sure that when I share a file on my home network that windows requires a password in order to access what it is not doing.

  The following conditions are true for both machines:

  Are windows 7 Home premium

  Have file sharing enabled on each respective network adapter

  Are members of the home network

  Are both on the network, called "WORKING group".

  Assistant file sharing was turned on and off then to make sure it wasn't an influence, it is currently off as he auto-actions the user root folder.

  Network discovery is on

  File sharing and printer is on

  I tried the two combinations of sharing folders public or not, but is currently disabled.

  Streaming media is off

  Password protected sharing is on

  Tried the two combinations of user accounts and passwords to connect to other computers. (This is currently set to allow windows to manage)

  So I won't list them the public parameters are not relevant.

  I put one hand on my laptop remove 'Everyone' and 'administrators' only have my own authorized account which is be an administrator.

  My other machine but I still seem to be able to open and access the folder. I tried to change advanced sharing permissions and security settings to exclude any group that can be let my other pc on the network but so far still no prompt for password.

  I even went to regedit and apply the following on both machines:

  1. Open Registry Editor (Start search - regedit)
  2. navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. create a new DWORD value with the following properties: NAME: LmCompatibilityLevel
  VALUE: 1
  4 reboot your PC and try again to establish the connection.

  Can anyone help?

  Thank you people!

  I think I've cracked the question:

  I created a new account admin on my PC and the first time I tried to access anything, I got the password. I don't have it a second time.

  I then removed and put in the passwords and then disconnected cache and back in and asked again the password.

  I tried the same thing on my other account, but it has not yet requested.

  It turns out that even on another computer, if you have the same username and password that it automatically authorizes for good once you enter the network password first.

• The code of failure of the authentication protocol Kerberos was "the user account has been automatically locked because too many attempts to invalid login or password change attempts have been requested.

  Hello

  I use Windows 7 (32-bit) with SP1.

  Quite often (at least three times a day) I am to be locked of my PC and cannot connect to 30 mts each time. I've analyzed carefully and there is absolutely nothing wrong with my ID on the front of Windows AD or group etc. policy.

  I am getting event ID 40690 in my observer of events and here are the details...

  WARNING on 09/06/2011 09:07:54 lsasrv 40960 any

  Log name: System

  Source: lsasrv with

  Date: 09/06/2011 09:07:54

  Event ID: 40960

  Task category: no

  Level: WARNING

  Keywords:

  User: SYSTEM

  Computer: workstation.companyname.com

  Description:

  The security system detected an authentication for the HTTP/http-proxy server error - nom_societe.com. The code of failure of the authentication protocol Kerberos was "the user account has been automatically locked because too many attempts to invalid login or password change attempts have been requested.

  (0xc0000234).

  I searched all possible sites and cannot find an appropriate solution.

  As it is causing a lot of inconvenience would appreciate a miracle solution as soon as POSSIBLE.

  See you soon,.

  bcshekar

  Hi bcshekar,

  The question you have posted is related to the area and would be better suited to the net Tech community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads

• PuTTY and password change issue ACS server

  When a new user is created with the checkbox 'Must change the password at the next logon' checked, ACS does not allow the user to change the password.  The password prompt displays a message access denied. Could someone point me in the right direction to solve this problem?

  I created a new account on cisco ACS server and check the box "user must change password at the next logon". I then used ssh to test the newly created using PuTTY user account. When I ssh to the cisco devices [switch or router] password prompt appears and ask me to type the new password. Once I did this I get a message access denied.

  It worked well with secure CRT. But users do not have secure CRT, they are supposed to use PuTTY. Users can connect in devices using PuTTY. The problem is that when we try to change the password.

  ACS Version: ACS 4.0

  Thank you

  Nachi

  When a user connects in SSH to the system and uses an expired password GANYMEDE, he is prompted to change their password. However, this password change does not work correctly.

  To resolve this problem, you must have the SSH v2 with "Keyboard interactive" authentication for SSH v2 game. Cisco bug ID CSCin91851 addresses this problem.

  Symptom:

  When you use the router as a ssh server is authenticating with a normal SDI/RADIUS, work of authentication backend. However, neither the new BUGS mode or mode next token dialogues completes successfully.

  Conditions:

  Problem only occurs in mode again PIN or next token dialogue mode.
  Specific SSHv2

  Workaround solution:

  Use telnet for authentication or to define vty lines to authenticate against RADIUS
  (non - SDI) server instead.

  Other Description of the problem:

  Not all ssh clients are supported the dialogue for the new PIN mode or next token to work.