Endomondo and other GPS / running applications

Similar Questions

• Flight Simulator 3 and other games running slowly in Windows 7.

  Original title: Sims 3 (and other games works incorrectly) suddenly running slow.

  I'll try to make this as brief as possible while providing for.

  When I got to Windows 7, the sims 3 worked perfectly. all the graphics on the top and so on. I can't quite identify when exactly it started running slowly and I mean slow! The game, itself, does not take long to load - it never did and it's practically the only thing that has not changed. But when I go in the game (from simply create a SIM to play), that he is lagging badly. To say things to the point, the whole game is rather fluid animation as a slide show of photos.

  I uninstalled and reinstalled, but the problem persists. I've also updated my nVidia graphics card it is newer, but it did not much difference in any of the games. Sidenote: I installed the sims 2 and well there a little laggy every now and then (he's since widows xp; sure enough it's normal) it preforms perfectly. I just can't understand why the sims 3 has suddenly decided to run horribly.

  In other games, such as smaller little such as Turbo Subs, are also slow, but not to the point where I can't even play. In fact, if I play long enough gal disappears and it works normally. But I think that it may just be an incompatibility problem because part of the mine, Burger Shop 2, works very well, even better than when I got Vista. Looking for confirmation here.

  Is it possible to fix it as it used to be, or at the very least, simply reduce the amount of lag?

  You can try to download and install the latest DirectX9 updates CFS3 and still need to other games.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en

  Then try to defragment your hard drive. Personally, I like this utility.

  http://www.iobit.com/iobitsmartdefrag.html

  If the problem persists, then open the Task Manager and check if there are all the running processes that take a lot of CPU resources.

• correct the page id and the page id application id and the id of the sensitivity of the other developer then

  Hi all

  I use apex 4.2 on windows World Bank on internet explore

  I followed the following link

  Oracle - button apex to call a page in another application - Stack Overflow

  at the end of the page, solution provider says

  It seems that your application id and the page id resemble developer links for your pages. You can't share a session as well. It could even be your problem: If you want to bind the user to the page of an application, use the ID correct and not the developer.

  what it means?

  How do I Unlike id and the real id of the developer?

  Please guide me because I think I'm also give the URL of developer which I just copy the URL of the web browser.

  Kind regards.

  Maahjoor wrote:

  I use apex 4.2 on windows World Bank on internet explore

  I followed the following link

  Oracle - button apex to call a page in another application - Stack Overflow

  at the end of the page, solution provider says

  It seems that your application id and the page id resemble developer links for your pages. You can't share a session as well. It could even be your problem: If you want to bind the user to the page of an application, use the ID correct and not the developer.

  what it means?

  This means that, following the structure of the URL of the APEX, in the example

  f?p=4000:4150:&APP_SESSION.

  the application ID is 4000, and the page ID is 4150. 4000 is actually the ID of the application that provides the APEX Builder Application development environment, and page 4150 is the definition of the pages it contains. Application between 3000 and 8999 ID are reserved for internal use of the APEX, so any application ID share you will be outside this range.

  How do I Unlike id and the real id of the developer?

  Please guide me because I think I'm also give the URL of developer which I just copy the URL of the web browser.

  There is no such thing as 'developer id' and 'real id '. Developers and end users run applications using the same ID.

  Note that published URL of permanent demand within applications should use alphanumeric calls and page aliases, ID not digital. This allows a fixed URL to provide to end users while allowing developers and administrators flexibility in how applications are deployed and maintained over time.

  If you have any remaining doubts, provide all the details of what you are doing, including the URL that you create.

• Anyone having problems with running applications?

  When I learned that Apple Watch would have built in heart rate monitor, I immediately looked forward to the Apple Watch replace my Garmin forerunner - combination of chest strap; No no not the chest strap is feeling better, even though having to tether my phone to my arm is needed for GPS.

  I tried Runtastic, Strava, Nike and Runmeter and have had disappointing results with all; Runtastic & Apple Watch Strava apps are just incredible unstable;

  they often disappear just halfway through a race. Nike seemed better, but they do not support the Apple Watch heart rate.

  RunMeter does, but today also let me down to halfway a descent, as the application on the watch disappears, after working fine the first 10 k.

  I wonder if others have similar bad experiences, if this is related to Apple to have changed things for software developers can't keep reliable communication in course of execution, or if I'm alone, which would indicate a possible hardware failure?

  I run with a 5s iPhone and Apple Watch. IPhone Apps all work very well and are stable, it's just the Apple Watch app that is defective. Any comment is welcome.

  Hello

  If you have not already done so, it can help to upgrade your iPhone and Apple Watch to the latest version of the software, from your iPhone:

  • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
  • Update the software on your Apple Watch - Apple Support

  The behavior you describe can be caused by your watch, lose contact with your skin, leading them to believe that he had been removed from your wrist. This would lead the practice application integrated, for example, to pause automatically.

  A bunch of cowards can trigger this by allowing your watch raise your wrist or clothing (for example, the end of a handle) to fit under the back of the watch. During the year, Apple Watch should be worn comfortably on top of your wrist. Apple suggests that you consider your clamping Strip before workouts and it loosen again thereafter. (Better contact with your wrist can also improve the performance of sensor of heart rate during your workout).

  

  • More information: your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

  Otherwise, for support for the resolution of problems associated with third party fitness applications, you can be useful to consult the respective developers support resources and contact them for support.

  For example:

  • Strava: Strava Running and bike - GPS Run and Ride Tracker support
  • Runtastic: be Runtastic GPS race walking, Jogging, Fitness Tracker & trainer support
  • Nike +: Nike + running support
  • Runmeter: Runmeter GPS pedometer - Running bike walking running Jogging & Interval Training Support

• LightroomCC2015 just disabled use.stating I need to purchase a license. I'm running on the plan for this and other applications. How do I fix this, please?

  LightroomCC2015 disabled just use of the develop Module. Indicating that I need to buy a license. I'm running on the plan for this and other applications. How do I fix this, please?

  Please see the troubleshooting section below.

  Reference: creative judgment Cloud 2015 to return to the mode of trial

  Let us know if that helps.

  Kind regards

  Mohit

• Running slow and other topics

  Hi all

  I'm looking for some advice on my iMac.

  I bought a 27 "iMac, with the hybrid drive system, 4 GB of NVIDIA GeForce GTX 780 M, 24 GB Ram, 3.5 Ghz i7.  I've had this for about 2 years now, and it is running El Capitan

  For the most part, I love this thing!  However, I had weird problems, and I don't know what to do.

  1. it works TERRIFICALLY FCPX.  That's mostly what I got it for and when exporting and rendering is fast... the interface is slooooooooow MOVE.  For example, I could switch to the razor blade tool, and just have the tools will result in a 2 minutes beach ball (does not whenever... randomly).  This has been the case since the day 1

  2. After awhile, my favorite items are disappearing boxes of import/export.  The shortcut of docs, desktop, downloads, etc... all vanished, leaving only hard drives as options for opening or recording

  3 safari does CRAZY things.  The tabs that I "pin" to the left... all of a sudden stoppage of work... but if I open a new tab and load the page manually, it is fine.  I also get weird freezes, where suddenly I can't scroll or enter nothing... everything just command-tabbing to another program and back which correct... but it happens a LOT.

  4. I also get random "you have run out of memory" messages.  My old iMac i7 must NEVER gave me this message

  5. I get random "gel total ups ' and resets.  I left the room for long periods, only to come back on a machine that completely re-bootred by itself.

  ' 6. I can not disable the Magic Mouse ' slide 1 finger!  When I try, it stays right on!  Not a huge deal, but I ALWAYS accidentally seem to slide backwards while web browsing... even if I do nothing, I moved my finger

  For all this contrast, I recently got a MacBook (the new really thin one), and although it is much less powered, seems to run the operating system faster and without any of the above questions.

  Yes, is there a way to understand what is happening?... or maybe a way to reset the computer (preferably without losing all my data)?

  Ideas, help or similar questions from others would be useful!

  Thank you

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• My 27 "IMac just started running slow and has a hard time, opening of Yahoo and other sites

  My IMac 27 "just started running slow and is struggling to open Yahoo and a few other Web sites. I bought it last August, but he has only started to slow market over the last two weeks. I have reset the pram, restarted with Cmd - R. I restarted in safe mode and as a guest and it still runs slowly. I have used Etrecheck, the only suspect think I wonder on "3.10 GB com.apple.WebKit.WebContent (5). What is webkit?

  last week I installed 2 Apple airpot extreme and hard wired two airports and my mac, my wifi I and the entire system is running 5, speed, download upload, and ping 11ms. 8mbps 5.9mbps I uninstalled Silverlight, Lightroom and most of the apps I use, but I can't figure out the problem.  Any ideas on what I can do to get my mac back to the current? I'm about to take my mac at the Apple store because she is still under warranty.

  Kind regards

  Rick

  
  

  Top of page process of memory: ⓘ

  3.10 GB com.apple.WebKit.WebContent (5)

  698 MB kernel_task

  Softwareupdated 475 MB

  254 MB Solitaire

  180 MB Safari

  EtreCheck version: 2.9.1 (251)

  Report generated 2016-02-03 22:56:23

  Download EtreCheck from http://etrecheck.com

  Time 01:18

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Another problem

  Hardware Information: ⓘ

  iMac (27 inch, at the end of 2013)

  [Data sheet] - [User Guide] - [Warranty & Service]

  iMac - model: iMac14, 2

  1 3.2 GHz Intel Core i5 CPU: 4 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  0/DIMM1 BANK

  Vacuum

  BANK 1/DIMM1

  Vacuum

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: unknown

  Video information: ⓘ

  NVIDIA GeForce GT M 755 - VRAM: 1024 MB

  iMac 2560 x 1440

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - time since started: about 2 days

  Disc information: ⓘ

  ST1000DM003 disk HARD APPLE disk0: (1 TB) (rotation)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  Macintosh HD (disk 1) /: 999,01 go-go (942,10 free)

  Storage of carrots: disk0s2 999.35 GB Online

  USB information: ⓘ

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Hub keyboard Apple, Inc.

  Apple Inc. Apple Keyboard

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Library/Application Support/org.pqrs/Karabiner

  [loading] org.pqrs.driver.Karabiner (10.15.0 - 10.11 SDK) [Support]

  Launch system officers: ⓘ

  [loading] 157 tasks Apple

  [operation] 79 tasks Apple

  Launch system demons: ⓘ

  [loading] 191 tasks Apple

  [operation] 96 tasks Apple

  Launch demons: ⓘ

  [loading] org.pqrs.Karabiner.load.plist [Support]

  [loading]    A spot of Apple

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Carabiner application (/ Applications/Karabiner.app)

  Other applications: ⓘ

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000003.Solitaire

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000007.Karabiner_AXNotifier

  [ongoing] com.etresoft.EtreCheck.115232

  [ongoing] org.pqrs.Karabiner.73632

  Plug-ins Internet: ⓘ

  Default browser: Version: 601 - SDK 10.11

  QuickTime Plugin: Version: 7.7.3

  Silverlight: Version: 5.1.41212.0 - SDK 10.6 [Support]

  3rd party preference panes: ⓘ

  None

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  4% WindowServer

  3% fontd

  0% kernel_task

  0% dock

  0% cloudpaird

  Top of page process of memory: ⓘ

  3.10 GB com.apple.WebKit.WebContent (5)

  698 MB kernel_task

  Softwareupdated 475 MB

  254 MB Solitaire

  180 MB Safari

  Virtual memory information: ⓘ

  86 MB of free RAM

  7.91 used GB RAM (1.03 GB being cached)

  10 MB of Swap used

  Diagnostic information: ⓘ

  February 1, 2016, 14:05:24 Self test - passed

  1 February 2016 13:47:18 / Library/Logs/DiagnosticReports/com.apple.WebKit.Networking_2016-02-01-134718_ [redacted].cpu_resource.diag [details]

  System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.Networking.xpc/Contents/MacOS/com.apple.WebKit.Networking

  Is very slow, or just web browsing? Was - this slow until you have changed the network?

• problem with obtaining security (Spy - Bot and SuperAntiSpyware) to run or install applications

  I made a mistake. It was preventable, and I knew that I made the mistake, but the curiosity is sometimes too strong.

  The result was once I downloaded and "installed" an update to adobe flash player (who turns out be a virus), SpyBot S & D and SuperAntiSpyware would not open their main windows.

  First of all, to treat the virus, I immediately shut down the computer. I had to do a force quit. I rebooted and never even got the screen that would allow me to boot into safe mode. I forced stop again, and this time, I unplugged the computer and removed the battery (it's a laptop). I noticed that the battery indicator has continued to do is market / stop flashes a few times more before, he finally stopped.

  I put the battery, plug the computer back in and started upward. This allowed me to go in safe mode, and I used that to do a restore to the last control point, which was yesterday morning. I caught the virus last night at about 17:30 or more.

  Which seems to work, but I have had a recurring problem since then. When I start up I get a message about an application that need to access a protected file. I keep clicking Cancel, because the window looks like a window of Win 2000, and I've never seen this message before. The application is named A with a highlight (as opposed to a line of underscores).

  In addition to this, I had to uninstall SpyBot S & D both SuperAntiSpyware because neither would open their main eindow and I would like to do a scan. I downloaded the installers again and tried to reinstall the two of them.

  SpyBot installed, but I still can't get the main window to open. SupeAntiSpyware will not install. The installation program will not even start. I'm sure that all of these things are related to this virus, because I didn't have these problems before you download.

  I ran Microsoft online virus and spyware last night. It has taken nearly 6 hours to complete the scan and found 7 problems, which I allowed to remove. The problem persists, because I still can't install SAS and SBS & D stil open its main window.

  What can I do to fix this? This is an image of the window that asks permission to access a protected file:http://wolf3dmall.zxq.net/PNG/what.png

  The virus file is contained. At first, when I double-clicked it, the file that I downloaded disappeared from my file my received files. After I got the system working again, I returned, set bookmark the pages concerned, re-uploaded the file, immediately the file zipped and deleted the file. I'm not sure who to send to find out what kind of virus it is, but he's a bad guy.

  I will try to provide more information, if necessary.

  PC: HP/Compaq nx9020 laptop
  OS: Windows XP Professional SP3

  Thank you.

  "Wayne.C" wrote in the new message: * e-mail address is removed from the privacy... *

  "Wayne.C" wrote in message news: Email removed for privacy...

  What security software you are using (McAfee, Norton, Avast, AVG, Kaspersky, etc.)?  The provider of your AV program probably offers a facility to submit files infected for analysis.

  Your computer is still infected - and the virus or other malware interferes with SuperAntiSpyware and other remedies.

  Have you tried Malwarebytes?  The infection may prevent you to install and run Malwarebytes.  However, you can sometimes overcome this problem by disguising Malwarebytes, so that the virus cannot recognize the program.  You'll find a great set of instructions at http://tech.amikelive.com/node-144/tdss-trojan-and-bediddle-adware-removal-guide. Although the instructions refer to the TDSS Trojan, you can use the same procedure to remove the other infections.

  You can also try a different approach, that might work. Try to connect to www.eset.com/online-scanner and perform an online scan.  If that does not work, in Mode safe mode with networking and try again.

  I have AVG but it has expired. I've been unemployed for a couple of years now, and I have no money to pay for the renewal of the contract with. I used SpyBot S & D and SuperAntiSpyware as my main defense since my AVG expired. I also try to make a habit of od stay away from sites known to the virus.

  It was my own stupidity, and I guess I deserve it, but I want to just fix this. I keep hope that something will change, and I'll get a job again, but so far nada. I can't really afford to lose this computer. It's been 6 years, and if he dies, I'm in a world of pain.

  I will try your suggestion and I'll post here what is happening.

  Thank you.

  Edit: I downloaded Malwarebytes, following the instructions on the site you provided. I ran the scan in safe mode, and it has found 19 problems. Then, when I rebooted, the guest even appeared requesting permission to access a protected file. I ran the scan again in normal mode, and it found nothing.

  After the restart again (the first analysis took less than an hour and a half, and the second scan took more than 3 hours), Yahoo Messenger started to run as soon as I got this stupid window again. I don't know what to think. My computer * seems * still works ok, but SpyBot S & D will not open its main window, and SuperAntiSpyware installer does not always. I will try reinstalling SpyBot again, but I am not sure that this thing is fixed.

  Unfortunately, no security software cannot be never 100% effective. Even if you have up-to-date protection AV, "bad guys" can always get through.  The absence of a comprehensive antivirus program with updated definition files increases the risk of significantly.

  While Spybot S & D and SuperAntiSpyware to your arsenal useful additions, they do not provide the full AV protection or resident and are totally unsuitable for primary protection.

  With Spybot S & D, you must also perform a manual update at intervals of a week, followed by vaccination.  Once you have run the weekly 'vaccination', Spybot S & D uses standard Windows and the browser to block access to known malicious Web sites. However, the key word is "known." The 'search and destroy' service manual can remove some infections and the option "TeaTimer" feature provides additional protection against unauthorized to your registry changes.  However, Spybot S & D does not have a complete AV protection and cannot protect against many infections initial.

  SuperAntiSpyware and Malwarebytes are tools for deletion, which are very good to eliminate infections who missed the other utilities.  Unfortunately, they cannot protect against the initial infection.

  The infection of your computer interferes with SuperAntiSpyware. Try the portable version of SAS (seehttp://forums.superantispyware.com/index.php?/topic/3424-superantispyware-portable).

  So, if you have not already done so, please perform an online scan, using www.eset.com/online-scanner?  You can also try the Windows Live OneCare safety scanner.  Learn tips to www.microsoft.com/security/portal/Shared/Help.aspx#infected

  You must also replace the version of AVG expired subscription with adequate antivirus protection.  The free version of AVG, the free version of Avast OR Microsoft Security Essentials free program would be alternative appropriate.

  Please note that you must have only one AV program reside on your computer, so it is important to eliminate all traces of your old AV program, before installing a replacement.  You will find tools to remove AVG at www.avg.com/us-en/download-tools.  If you have already used McAfee or Norton on your computer, you should also download and run these emissions removal tools.

  Unfortunately, there is a risk that the infection could prevent or interfere with the installation of any other anti-virus program.  This is why I recommended a scan online, before you remove the subscription version of AVG or install a replacement antivirus software.

  If you install Avast, you must perform a complete analysis standard, followed by an analysis of 'Boot', which will check your computer when you re - start in Windows.  (A Boot scan can remove infections that are hidden, after Windows starts).

  I have SuperAntiSpyware and SpyBot S & D to work. I followed the same convention that I used with MalwareBytes. I've renamed South spybot and its opening. I installed SAS as sup and it worked as well. Even after using both of them, which resulted in the SAS, but not in Spybot, the window requesting the ever-present authorization, usually at the time that yahoo Messenger connects to the network.

  I'll follow your suggestions. I wasn't aware that AVG has a free version. When I bought the installation I have now, it's because the only 'free' version, that I could find was a trial version that only lasted 30 days. I can't replace my anti-virus every 30 days, just because I can't pay for protection. A man who even sounds like extortion. :(

  This seems to be the correct approach.  However, Malwarebytes and SuperAntiSpyware did not remove the infection, and I fear that the malware prevents the installation of updated AV protection.  I hope that you will be able to install the free version of AVG, and if so, I hope that it will remove the infection.

  I recommend also to download and install a utility named 'Hijack this'-http://free.antivirus.com/hijackthis.  Run "HijackThis.exe" to generate a log file and save the log to a directory on your hard drive.  Do not try to use HijackThis to fix the infection.

  At this point, you will need additional assistance which I am not qualified to provide.  However, there are a number of Web sites that are occupied by volunteer experts who can offer help step by step.

  Register for a free account on www.bleepingcomputer.com and click on the Forums tab.  Forums security scroll and select the forum "Virus, Trojan, Spyware and Malware Removal Logs".  Create a new thread and view the details of your problem.  You also paste the full text to hack this journal in your inquiry.

  You may need to wait a few days.  However, one of the Bleeping Computer experts will analyze the log and I hope, will be able to provide removal of the step by step instructions.

• Your computer is low on memory. Quit other programs, and try again. . NO IT's NOT... and no other prog running... player victory med doesn't work anymore...

  I get this message in box "[your computer is low on memory. Quit other programs, and try again. "] When I try to run my videos on wmplayer as ive allways done and now this..." the only recent download, I was able to isolate is silverlight, but have disabled it makes no difference, have already asked on this forum but will try again in the hope, I looked at a few sites referring to this prob, but without a bit of luck, I see is not just me at least... Let's hope that any 1 out there can be help Thank you

  Hello

  You may need to change the amount of virtual memory available:

  Change the size of virtual memory
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  CTRL SHIFT ESC to Task - tab process manager - click on the column of memory (may have to click twice)
  to see what is using all the memory that should not. Right-click on anything that uses a lot of memory
  and there might be other options like going to Services where "there" is a service associated with
  Note.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• I can not select Windows 8.1 upgrade and other applications after update system

  I just refreshed my laptop Windows 8.1 after that that he returned to Windows 8... I opened the store and I can't select Windows 8.1 upgrade and other applications. What can solve this problem?

  Hey Kevin,

  If you bought your laptop with Windows 8, and she had a recovery partition, it would reset to Windows 8 when you want to run a system to refresh. This also applies if you have performed the update system using a disk installation or recovery of Windows 8. You mentioned that you are now unable to update Select 8.1 of Windows update, the Windows store.

  The Windows 8.1 update is not listed? Or you can not face problems with the update 8.1 for Windows from the Windows store?

  If you are facing the issue later, what happens when you click on the update of Windows 8.1 in Windows store? An error message appears?

  You also mentioned that you can not store of Windows other apps? What happens when you try to install?

  If you are unable to find the Windows 8.1 update in the Windows store, try the steps suggested in this article and checking:

  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

  If you are unable to install the update Windows 8.1 displayed in store Windows, then try these steps and check:

  First of all, make sure that you have installed all the Windows updates available, including 2871389 KB and KB 2917499.

  Method 1:

  Run the Windows update troubleshooting utility which can automatically detect and fix most of the incorrect settings that could cause problems with the download of updates. See the following steps:

  1. Press the Windows key + F to bring up the Search bar charms.
  2. Type of Troubleshooting and press enter; Click the tab settings , under the search box.
  3. Click on the tile to find and fix the problems and then click on the button show all the left pane.
  4. Click the Windows update troubleshooting tool and run it.

  Method 2:

  If the problem persists, disable any third-party antivirus software that you may have installed temporarily and check.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  If the problem persists, start your computer in a clean boot state, and then try to install Windows 8.1. Start your computer in a clean boot state, you can reduce conflicts between software and help identify the root cause of the problem. You can read this article for more information:

  http://support.Microsoft.com/kb/929135

  Note: after the resolution of the problem, reset the computer to start as usual. Refer to the step How to configure the computer to start as usual after a boot minimum troubleshooting under more information.

• I have a server/database Application Express 4.1.1 running and a server/database Application Express 4.2.0 running. Is it risky to try to upgrade to the latest version and start using the universal or complex theme?

  I have a server/database running Application Express 4.1.1 and a server/database active Application Express 4.2.0. Is it risky to try to upgrade them both to the latest version and start using the universal or complex theme?  Is how easy it to do? Recommended?

  The servers are windows 2008 r2. Don't know if it matters.

  I'm not exactly an expert at the express request...

  Hi DJake,

  DJake wrote:

  I have a server/database Application Express 4.1.1 running and a server/database Application Express 4.2.0 running. Is it risky to try to upgrade them both to the latest version and start using the universal or complex theme?  Is how easy it to do? Recommended?

  The servers are windows 2008 r2. Don't know if it matters.

  I'm not exactly an expert at the express request...

  Please read the documentation of the requirement for Oracle APEX 5. Ensure that your environment meets these requirements. Upgrade your oracle database or other software if necessary components and then you can go right 4.1/4.2 to 5.0 update according to the above-discussed upgrade strategies in the above discussions.

  Reference: https://docs.oracle.com/cd/E59726_01/install.50/e39144/pre_require.htm#HTMIG376

  You should go for upgrade of the Oracle APEX of 4.1 to 5.x. Regression test your applications to remove if any errors introduced by upgrade. The kickoff of a new project to migrate your applications to universal theme.

  Reference:

  • Re: upgrading to 5.0 - best practices
  • Re: APEX late upgrade
  • https://www.YouTube.com/watch?v=o8S4bg4Vo0A

  Kind regards

  Kiran

• Creative Cloud app and other applications will not download or install?

  Does he know to help get this to work?  CC symbol appears for 1/4 second in the taskbar in the gray Apple and disappears. App won't appear on the desktop, and none of the applications as LR or ID will download and tried for 4 hours.

  So using a Power Mac 13 inch 2015 book should work.  Cannot get Adobe on Chat support or actually tried for 3 hours and continued to get to help the other answer and when I went to use the bathroom and putting the kids to bed, they finally got to me and the cat hung up after 7 minutes. so frustrated with them and nothing works.

  Anybody have this problem of CC app does not?

  This problem has been noticed on Mac computers.

  The main causes are the conflict with the Manager of add ons, files, issue licenses.

  (1) right click on the Finder icon and select 'Go - To Folder' option.
  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  It will open a library folder. Find the entry folder Manager.

  Make sure that the input Manager is empty

  Move the contents of the managers on the desktop entry file and try to run and check.

  Try with the solutions proposed in the links below:

  Creative Desktop Cloud application does not start

  Adobe Creative Cloud closes immediately after trying to start

  Creative Cloud desktop App for Mac crashes and does not

• Just installed Mac OS Sierra on Mac Pro air. What I do need to update to Safari and other applications on the iPhone and I have the carpet?

  Just installed Mac OS Sierra on Mac Pro air.

  What I do need to update to Safari and other applications on the iPhone and I have the carpet?

  Unless otherwise indicated by an application or in the description of an update, no.

  (144880)

• Cannot open links in Safari, Messages, messages, Notes and other applications.

  Problem on the iPhone 6 and iPad pro since version 9.3 I can't open links in Safari, Messages, messages, Notes and other applications. Rather than visit the target website, the application crashes, freezes or crashes.

  How to fix bug of broken links ios 9.3 safari/mail:

  (1) find and uninstall the application of booking.com, if you

  (2) wait at least 1 hour, the bug disappeared. Perhaps you need to reboot once

  to reproduce the bug again: install the app booking.com

• I have a MacBook Pro 17 withProcessor - in 2.33 GHz Intel Core 2 Duo (circa 2007).  Running OS 10.7.5 (Lion).  Not compatible with the OS later.  Hardware can be upgraded to the latest processors and other components to make it compatible with the new OS

  I have a MacBook Pro 17 withProcessor - in 2.33 GHz Intel Core 2 Duo (circa 2007).  Running OS 10.7.5 (Lion).  System indicates the computer is not compatible with OS later.  Hardware can be upgraded to the latest processors and other components to make it compatible with the latest OS.  I think that later models of Macbook Pro 17-inch with processors that allow updates.  I was wondering if these can be swapped or if alternatives were available.

  Only the RAM and storage (HD, SSD) can be changed.  Everything is welded to the map logical and selected specially for the system configuration.

  I'm sorry.