Entity framework problem and the types of courts
I use Entity Framework in Visual Studio to access a table in my oracle database. Problem is when you select a record in run mode, the following error appears:Value was either too large or too small for an Int16
This error comes when trying to access a table declared as number field (5). The framework reflects this in a short runway. The max value for short is 32767, but the value in the table is 36001.
I can solve this?
Thank you.
Yes, you must change the mapping of this type to an Int32. For this you can add this to your config file:
You should then update the model for the new changes. Note that I found that I have to manually change the types in the model, but after I do this once it works fine. The documentation is here: http://docs.oracle.com/cd/E11882_01/win.112/e18754/featLINQ.htm
Tags: Database
Similar Questions
-
Cannot open word document because a
"appropriate graphics importer is not found."
I had this problem and the technician "selected" Word as an opener, but I don't know where to find them on my computer. Can you direct me while I have when I want the word docuents to open they will be?
Right click on the saved file.
Select: Open with on the shortcut menu.
Click: Choose [default] program
Letter: Microsoft Word
Check: Always use the selected program to open this type of file.
Click OK.Bruce Hagen
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA -
sez no authority trying to run AVG or Malwarebytes - every 1/2 hour or if some "prog system? NTauthority or Services and controller app sez he has a problem and the computer shuts down
Hello
- What is the full error message?
- What were the changes made to nfore this question?
- What exactly do you mean by "no authority running avg or malwar bytes?
It's a possibility that there is a startup program that is launched with a command line and it appears.You need to perform a clean boot to find the program that is causing and then disable or remove.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-us
Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual. -
"Media Center Receiver service has encountered a problem and the need to close"
"Media Center Receiver service has encountered a problem and the need to close" I had to do a Windows XP system restore since then I continue getting the error message appearing all the time. How can I disable this message?
Hi Keith,
What is your level of service pack?
Let's try the following: How to configure Windows XP to start in a "clean boot" State. This could help us eliminate third-party applications that may cause a conflict.
-
I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?
Hi Izzy Nagar,
· Exactly when you receive this error message?
· Did you do changes on the computer before the show?
· Do you have any extended monitor connected to the computer in the past or at the present time?
Follow the suggestions below for a possible solution:
Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.
Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.
Ways to improve display quality
http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality
Flicker of the correct monitor (refresh rate)
http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate
Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.
a. click the Start button, click the arrow next to Shut Down and then click on restart.
b. do one of the following:
· If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
· If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.
c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.
d. connect to your computer with an account of a user who has administrator rights.
e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:
Updated a hardware driver that is not working properly
I hope this helps.
-
an error message appears indicating the pc has a problem and the computer shuts down
an error message appears saying the pc has a problem and the computer shuts down.
What do you do when this happens? It is the way in which computers to protect the components of your computer.
-
I have downloaded Microsoft Windows Malicious Software Removal Tool (KB890830) - to install the CAB file switch and it detects 2 problems during analysis, but in the end that he said found no problem and the only option I have is to click Finish. I tried several times with the same result of detection 2 never, he gets rid of them. Help?
OT: Malware
On Saturday, April 5, 2014 22:59:18 + 0000, JChabler wrote:
Where? I find only free trials to detect, but you have to pay to resolve.
Go to https://www.malwarebytes.org/ and lower-left button
corner, one that says "Free download." -
downloError code is 417 and the type of error is - 60
I'm trying to download the creative cloud for a long time and I get error 205.
Read the file DLM.txt in %temp%\AdobeDownload\ I have the following error details:
23/05/15 17:16:04:406 | [ERROR] | | | | | | | 4352 | Is the windows error code - 12002
23/05/15 17:16:04:406 | [ERROR] | | | | | | | 4352 | Error 12002 in WinHttpQueryDataAvailable.
23/05/15 17:16:11:649 | [ERROR] | | | | | | | 3832. Download job: could not validate segment (2)
23/05/15 17:16:11:649 | [ERROR] | | | | | | | 3832. (2) download task failed to run. The State of the work is STOPPED_STATE
23/05/15 17:16:11:906 | [INFO] | | | | | | | 6204 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60
23/05/15 17:16:31:745 | [ERROR] | | | | | | | 7144. Download job: could not validate segment (0)
23/05/15 17:16:31:745 | [ERROR] | | | | | | | 7144. the download work (0) could not run. The State of the work is STOPPED_STATE
23/05/15 17:16:31:903 | [INFO] | | | | | | | 2284 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60
23/05/15 17:16:33:579 | [INFO] | | | | | | | 2284 | decrement the number of threads. the number of active threads is now 1
23/05/15 17:16:37:741 | [INFO] | | | | | | | 6204 | the thread incrementing. the number of active threads is now 2
23/05/15 17:16:46:943 | [ERROR] | | | | | | | 3832. Download job: could not validate segment (2)
23/05/15 17:16:46:943 | [ERROR] | | | | | | | 3832. (2) download task failed to run. The State of the work is STOPPED_STATE
23/05/15 17:16:46:990 | [INFO] | | | | | | | 6204 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60
23/05/15 17:17:10:211 | [ERROR] | | | | | | | 7144. Download job: could not validate segment (0)
23/05/15 17:17:10:211 | [ERROR] | | | | | | | 7144. the download work (0) could not run. The State of the work is STOPPED_STATE
23/05/15 17:17:10:273 | [INFO] | | | | | | | 2284 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60
23/05/15 17:17:32:978 | [ERROR] | | | | | | | 3832. Download job: could not validate segment (2)
23/05/15 17:17:32:978 | [ERROR] | | | | | | | 3832. (2) download task failed to run. The State of the work is STOPPED_STATE
23/05/15 17:17:33:677 | [INFO] | | | | | | | 6204 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60
23/05/15 17:17:33:677 | [INFO] | | | | | | | 6204 | decrement the number of threads. the number of active threads is now 1
23/05/15 17:17:35:988 | [INFO] | | | | | | | 2284 | the thread incrementing. the number of active threads is now 2
23/05/15 17:17:48:657 | [ERROR] | | | | | | | 7144. Download job: could not validate segment (0)
23/05/15 17:17:48:657 | [ERROR] | | | | | | | 7144. the download work (0) could not run. The State of the work is STOPPED_STATE
23/05/15 17:17:49:207 | [INFO] | | | | | | | 2284 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60
23/05/15 17:18:01:272 | [INFO] | | | | | | | 6204 | the thread incrementing. the number of active threads is now 2
23/05/15 17:18:09:338 | [INFO] | | | | | | | 6204 | decrement the number of threads. the number of active threads is now 1
23/05/15 17:18:14:549 | [ERROR] | | | | | | | 3832. Download job: could not validate segment (2)
23/05/15 17:18:14:549 | [ERROR] | | | | | | | 3832. (2) download task failed to run. The State of the work is STOPPED_STATE
23/05/15 17:18:14:608 | [INFO] | | | | | | | 6204 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60
23/05/15 17:18:18:400 | [INFO] | | | | | | | 2284 | decrement the number of threads. the number of active threads is now 1
23/05/15 17:18:29:306 | [ERROR] | | | | | | | 7144. Download job: could not validate segment (0)
23/05/15 17:18:29:306 | [ERROR] | | | | | | | 7144. the download work (0) could not run. The State of the work is STOPPED_STATE
23/05/15 17:18:29:838 | [INFO] | | | | | | | 2284 | New attempt to overrun of the count of ERROR_SEGMENT_VALIDATION_FAILURE - 11
23/05/15 17:18:30:557 | [INFO] | | | | | | | 7144. the download job (0) is cancelled
23/05/15 17:18:38:820 | [ERROR] | | | | | | | 3832. Download job: could not validate segment (2)
23/05/15 17:18:38:820 | [ERROR] | | | | | | | 3832. (2) download task failed to run. The State of the work is STOPPED_STATE
23/05/15 17:18:39:539 | [INFO] | | | | | | | 6204 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60
23/05/15 17:19:47:136 | [INFO] | | | | | | | 6204 | * Download the file acheves.* *.
My OS is Windows 8.1
Thank you
Error 205 is a validation for the Segment failure while downloading the file from the Adobe server.
See link above and try with recommendations:
-Disable anti-virus and firewall temporarily and try to download.
-Check the Hosts file and see if there are all the entries in Adobe, if so remove.
-If you use a connection without wire/Wifi, try with wired Ethernet, wireless connections are nonlinear and often the question failed Validation of Segment, due to the decline of network signals.
-C' is maybe not the possible solution: If you already use Ethernet connection cables try different Internet connection with the ISP company.
-If you are connected to the corporate network or behind proxy, make sure that Adobe ports are on a white list or allowed on the network firewall.
If all are agreed:
You can check the link below:
Whenever I try to download the creative cloud, I get an error with error205.
-
You use Mac OSX 10.7.5, when you try to open a PDF file, I get a message "an internal error has occurred." I uninstalled and reinstalled both Adobe 10 and 11. Anyone know of the problem and the solution?
Hi Charles,
It is specific to a particular file or all the files that you are trying to open, gives you the error.
How you open the same file using Preview on Mac.
Thank you
Vikrantt Singh
-
I use this "Select dbms_metadata_diff.compare_alter('TABLE','COMP1','COMP2') from double;" compare two tables and see the result as below, but when I use "Select dbms_metadata_diff.compare_alter ('VIEW ',' VIEW_NAME1, 'VIEW_NAME2',"USER1","User2") double" to compare my opinion I do not see the result as below? But the query runs without error...! I want to compare, synonym, trigger and the Type. Thank you!
Result:
ALTER TABLE "USER1". "" ADD TBL_A "("FIELD_A6"NUMBER (2.0) NOT NULL ACTIVATE)
ALTER TABLE "USER1". "" TBL_A "DROP ("FIELD_A3")
ALTER TABLE "USER1". "" CHANGE TBL_A ' ("FIELD_A2' VARCHAR2 (20))
ALTER TABLE "USER1". "" CHANGE TBL_A "("FIELD_A4"NUMBER (5.2))
ALTER TABLE "USER1". "" CHANGE TBL_A ' ('FIELD_A4' ACTIVATE NOT NULL)
ALTER TABLE "USER1". "" CHANGE TBL_A ' ('FIELD_A5' NULL)
USER1:
create table TBL_A (FIELD_A1 number not null,
FIELD_A2 varchar2 (50).
Date of FIELD_A3,
FIELD_A4 number (5.2) default 0,
FIELD_A5 varchar2 (10) not null
);
CREATE VIEW view_TBL_A AS
SELECT FIELD_A1, FIELD_A2
OF TBL_A
WHERE FIELD_A1 = 114
USER 2:
create table TBL_A (FIELD_A1 number not null,
FIELD_A2 varchar2 (20).
FIELD_A4 number (5.2) not null,
FIELD_A5 varchar2 (10),
FIELD_A6 number (2) not null
);
CREATE VIEW view_TBL_A AS
SELECT FIELD_A1, FIELD_A2
OF TBL_A
WHERE FIELD_A1 = 111;
When I use "select dbms_metadata_diff.compare_alter ('VIEW ',' VIEW_NAME1, 'VIEW_NAME2',"USER1","User2") of the double ' compare my opinion I do not see the result as below?
Isn't that strange? Even abroad-, we see NO results at all. Maybe because you don't post it to watch us.
For an example of how to use the DBMS_METADATA_DIFF package to compare objects, see database utilities
http://docs.Oracle.com/CD/E11882_01/server.112/e22490/metadata_api.htm#BABIDHGE
-
problem with the type of local and global
Hi the gems...
I have a plsql package. In the package, I defined a proc that takes two input parameters of type simple number and a parameter of a type of output collection.
create or replace package pack_1 as body
procedure proc_1 (p_number1 in number, p_number2 number, p_tt_table to tt_table) as
v_tt_table tt_table:=tt_table();
type c_ref_cursor is ref_cursor;
v_c_ref_cursor c_ref_cursor;
v_sql varchar2 (20000): = < a large sql using bind variables p_number1 and p_number2 >
Start
Open the v_c_ref_cursor for v_sql using p_number1, p_number2;
loop
extract the v_c_ref_cursor in v_tt_table;
When the output v_tt_table.count = 0;
for idx in 1.v_tt_table.count
loop
< business logic >
end of loop
end loop;
close v_c_ref_cursor;
< excpetion_block >;
end;
< several codes for the rest of the package >
When I execute the proc_1 then he throws me error of data type incosistent while to fetch the v_c_ref_cursor of cursor in the v_tt_table variable.
ORA-00932: inconsistent data types: expected - was -.
But I have checked that the output of the query is similar with the type of variable.
Now, a few facts: the tt_table of the user-defined table type is made from ot_table (create or replace tt_table to ot_table Board).
The parent type i.e. ot_table has the same columns of this query in v_sql my proc.
The ot_table and the tt_table are global types.
But when I did these two types as local types, then the proc works very well. But I need them as global types only according to the condition in java.
Please help me. The database is 11 GR 2.
Thanks in advance.user12780416 wrote:
I'm trying to keep it in the simplest form... Please take a look...
Ah... Easy to solve.
The projection of SQL must be an object of type ot_test_type for extraction in bulk work.
Your projection of SQL look like this:
cursor c1 is select object_name from user_objects;object_name is a string - it is not of type ot_test_type.
You must change the projection to return ot_test_type. This is done by using the default constructor for that type of object.
For example
cursor c1 is ot_test_type (object_name) select as the user_objects OBJECT;He may now be in bulk recovered in tt_test_type.
-
Satellite L30-134 PSL33 - Question about the version of the BIOS and the type of DVD writer
Hello!
I bought a Toshiba L30-134 PSL33 the week last in Hungary. I recorded to Toshiba international warranty, so I saw that my cell was made the 19.10.2006.
My friend bought the same laptop (Toshiba L30-134 PSL33) too (also in Hungary), two weeks ago. His machine was made on 19.12.2006.
It's already funny, but that's not all.
My laptop has a series number starts with X, and the machine of my friends has this starting with Z. That's ok.
But here it is...
I have a BIOS version of 1.3 and my friend has a BIOS version of 1.9! 0.6 gap within two months? Why?
The other thing. I have a DVD burner called Mat * a UJ - 841 S and my friend has a LG 4082. Once again: why?
If you are looking for Toshiba BIOS update you don't find anything! It is very interesting. There must be some updates to the BIOS, because I read here to another topis that someone has a BIOS version of 1.4. But there are 1.9 too.
Each book was brand new when we bought.
Any idea?
Let me know when you bought your laptop, what BIOS version it has, and what kind of DVD player there.
I'm wainting for the answers, because I'm really interested!Thank you
MarcellHey Arnaud!
I m from Hungary, too, but I think I should speak English on this forum :) So here is my notebook, I ve bought on 24.12.06. :
Type: L30 - 134 PSL33E
The machine was made on: 19.12.06
Series: starts with Z
DVD player: LG
BIOS version: 1.9You should t be nervous on the drive, the carpet * a Panasonic, and I think that s as good as LG. Why are they different? I put t know, maybe Toshiba was such at the time. In the specifications I didn't seen anything on the drive type, so I think that s not relevant. I t has not found another version of BIOS for this model, so I t understand too why and what are the differences between the versions. But if you n t have a problem with your machine, you do not need to change the BIOS. This isn't a PC, if you haven t many options to change in the BIOS.
If you want to discuss on the laptop on the Hungarian language, I recommend the Toshiba section on www.prohardver.hu.Best regards
Abel -
I am running XP.
When I select an email or try to create an e-mail, I get the Outlook Express "pop up" where it is said"outlook express has encountered a problem and need to close... Sorry ". Asks me if I want to send a messagefor Microsoft, when I click on the option, the screen freezes and I have to type the keys del Alt, control, in order to freeand end of the task.You may have a damaged identity especially if it's the default main identity. File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.
Note: Do not use the main word in the name of the new identity.
-
Windows media player has encountered a problem and the need to close
Using windows XP. Whenever I try to start windows media player, I get the error message saying that it has encountered a problem and needs to close. Help, please.
Error signature
AppName: wmplayer.exe AppVer: ModName 10.0.0.3802: albumart3d.dll
ModVer: 1.0.0.1 Offset: 00003179
Event Viewer: application log: Error Description
Event type: error
Event source: app error
Event category: no
Event ID: 1000
Date: 10/04/2011
Time: 13:44:54
User: n/a
Computer: Description:
A failed application wmplayer.exe, version 10.0.0.3802, failed module albumart3d.dll, version 1.0.0.1, fault address 0 x 00003179.Hello
1. what version of Windows Media Player is installed on your computer?
If you have Windows Media Player 10 or above, I recommend you to uninstall and reinstall Windows Media Player, and check.
I hope this helps.
-
Yesterday I installed Security Suite CA. It installs and everything indicates that it works correctly, but when I try to open a pop-up appears microsoft Windows telling me a pproblem occurred and the program stops, and then another pop up appears saying program closed and they send me a solution if there is
Here are the codes I found impossible to repair... files should I copy the whole report or is it enough to make me help with this question?
POQ 76 ends.
2011-04-03 07:55:23, Info CSI 0000018e [SR] full Verify
2011-04-03 07:55:23, CSI 0000018f [SR] components Info check 100 (0 x 00000064)
2011-04-03 07:55:23, transaction Info CSI 00000190 [SR] beginning verify and repair
2011-04-03 07:55:35, Info CSI 00000191 hashes of file Member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini are not real file [l:24
"{12}]" Settings.ini ":
Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o =}
2011-04-03 07:55:35, Info CSI 00000192 [SR] cannot repair the military record [l:24 {12}] "settings.ini" of "Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope =
1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, PublicKey neutral in the store, hash
incompatibility of
2011-04-03 07:55:39, info CSI 00000193 hashes of file Member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini are not real file [l:24
"{12}]" Settings.ini ":
Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o =}
2011-04-03 07:55:39, info CSI 00000194 [SR] cannot repair the military record [l:24 {12}] "settings.ini" of "Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope =
1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, PublicKey neutral in the store, hash
incompatibility of
2011-04-03 07:55:39, Info CSI 00000195 [SR] this element is referenced by [l:158"{79]" Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR.
Hello
· This software provided by the ISP (Internet Service Provider)?
Method 1:
I suggest you to refer to the link provided below to uninstall and reinstall CA security.
Step 1:
To uninstall a program in Windows Vista see the link below.
http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program
Step 2:
Once you uninstall the program reinstall to install a program under Windows Vista refer to the link below:
http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program
Method 2:
You can also contact the CA Technologies team for available updates or patches to fix the problem.
Maybe you are looking for
-
Satellite 2450 - the recovery disk contains the same OS?
I have a Toshiba 2450 (Yes old enough) and I want to reformat the HARD drive and install Windows XP. Now, my question is I can do with the product recovery CD, and if I reformat with him it will be the same operating system as before (Windows XP home
-
Module LabVIEW MathScript RT x 64
Hello everyone I tried to find the labview MathScript RT Module x 64 tooklit, but it is just for x 86. my version of labview is 2014 x 64. How can I install the MathScript RT Module for x 64. Y at - it all tooklit MathScript RT Module for x 64?
-
PowerShot HS XS530: Filter size? An adapter is required? Model number?
What size filter does the XS530? An adapter is needed to fix a filter? If Yes, what is the model of the adapter number? Thank you!
-
the bar of startup tasks, icons are passed down, to the side how can I move them back down
-
Windows 7 Extended Support contracts
I'm an avid user of Windows 7. Does anyone know how/where/when I could subscribe to the new Windows 7 Extended Support contract? I have read a lot of discussion about this, but have not been able to find indications of price/contract. All data on t