Envy 15 - J026TX: Envy 15 - J026TX - compatible screen with other models

Similar Questions

• Share my screen with others

  I presented the tiara to some of my colleagues, a question arose that I could not answer.  Often, we need to work on some data by sending data by e-mail. Thus, the ability to share the raw data as well as the plots, comments, etc.  Among his collaborators, it is really important.  So, is it possible for me to quickly share what I watch with Diadem, plots, data, otherwise, with someone else so that they can quickly see what I see?  And then perhaps deepen the data?

  For example:

  All plots in Excel - and all are stored in a file

  Vision of ATI - a file contains raw data recorded, comments, markers, views, etc.

  Concerto - here is a container file that can be saved to share all the views, schemas, data, etc.

  Can I do something like that with DIAdem?  If so, how?

  Hey Russell,

  Have you ever tried to use the example of shipping "Create and save a work meeting", under "extending functionality with Scripts?

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How to get the orientation angle screen with 40 Hz stably without delay to sync?

  Goal: Get orientation angle screen at 40 Hz stably without delay for synchronization.

  Problem with two situations:

  1. When you use the bbutil_swap and navigator_event_get_orientation_angle (event) to get the orientation angle screen with other data such as acceleration sensors and gyroscope data, the sampling frequency will be low grade at 10 Hz randomly. The difference of synchronization will increase from 25 ms to 100 ms.

  2. when the screen orientation angle is collected in the following code to get the angle only, the difference in timing of sampling will be 1, 2 or 5 seconds at random.

  Question: How do I get the orientation angle screen with 40 Hz stably without delay to sync?

  or something wrong in my code?

  Mini code:

  public static void handleNavigatorEvent(bps_event_t *event) {}
  switch (bps_event_get_code (event)) {}
  case NAVIGATOR_ORIENTATION_CHECK:
  navigator_orientation_check_response (event, true); If not the line, no updates on the screen rotation.
  angle = navigator_event_get_orientation_angle (event);
  break;
  case NAVIGATOR_EXIT:
  stop = true;
  break;
  }
  }

  public static void handle_events() {}
  for(; ) {
  bps_event_t * event = NULL;
  If (BPS_SUCCESS! = bps_get_event (& event, 0)) {}
  fprintf (stderr, "bps_get_event failed\n");
  break;
  }
  If {(event)
  If (bps_event_get_domain (event) is {navigator_get_domain()})
  handleNavigatorEvent (event);
  }
  } else {}
  break;
  }
  pthread_create (& t1, NULL, (void *) & rawacceleration, NULL);
  }
  }

  int main (int argc, char * argv []) {}
  screen_create_context (& screen_cxt, 0);
  bps_initialize();

  {If (EXIT_SUCCESS! = {bbutil_init_egl (screen_cxt))}
  fprintf (stderr, "bbutil_init_egl failed\n");
  bbutil_terminate();
  screen_destroy_context (screen_cxt);
  return 0;
  }

  If (BPS_SUCCESS! = screen_request_events (screen_cxt)) {}
  fprintf (stderr, "screen_request_events failed\n");
  bbutil_terminate();
  screen_destroy_context (screen_cxt);
  return 0;
  }

  If (BPS_SUCCESS! = navigator_request_events (0)) {}
  fprintf (stderr, "navigator_request_events failed\n");
  bbutil_terminate();
  screen_destroy_context (screen_cxt);
  return 0;
  }

  Rawlog = fopen (rawfilename, "w"); Save the file in a specific path.
  fprintf (rawlog, "Absorption system, Angle\n");

  navigator_request_events (0);

  While (! shutdown) {}
  handle_events();
  bbutil_swap();
  }

  closeshutdown();

  return 0;
  }

  Thank you for your attention,

  Using SENSOR_TYPE_ORIENTATION of sensor_type_t , you should be able to get > 10 Hz.  Use sensor_set_rate() to get the slower delay to call sensor_info().  Make sure not to enable sensor_set_skip_duplicates().

  However get the orientation at the 40 Hz streaming will not make your application any repsonsive more.  The only way to make your app more would be to manage the orientation change in a short period of time.  This is the time when orientation changes (at the hardware level), to receive you and to deal with it.  It is usually a constraint system and there is not that you can do about it.  What you see using the code above is the same information repeated over and over; FACE_UP, FACE_UP, FACE_UP, which is not really useful.

• HP Envy laptop: m7-n011dx: HP Envy laptop - replace touch screen without touchscreen standard

  The touch screen on my laptop HP Envy (m7-n011dx) is cracked.  Is it possible to replace the touch screen with a standard, the right touch, the screen? I did not touch screen and actually prefer something more sustainable.

  If so, can someone point me to the spare part number good touchscreen?

  If not, can someone confirm the correct touch screen part number?

  Thank you.

  Hello @elcapitan26,

  Thanks for the quick response!

  My mistake, this is the number of spare part: 813808-001.

  Take a look at Chapter 3, Page 20 in the guide.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• HP envy 15-ae130tx: I can add a SSD for my HP envy 15 ae130tx touch screen?

  Can I add a SSD drive in my HP envy 15 ae130tx touch screen? And I can also remove my hard drive?

  Thank you very much!! Sorry for my bad English!

  Yes that's exactly what I say

• Drivers for HP Envy 17 j141na - Compatible with Win7?

  Hello

  I brought a HP Envy 17 and immediently restored to Win7, because it was of Win8 out of the box. On page pilots he seems to have Win8 in the drop-down list (http://support.hp.com/za-en/drivers/selfservice/HP-ENVY-17-Notebook-PC-series/5401174/model/7200325)

  I tried to install a driver wireless, but in vain. Display drivers are not no longer works. I think that some have, but it feels not compatible

  Where can I get Win7 drivers please?

  You are the very welcome.

  Here is the support page for your specific model... There is too much drivers W7 for her.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-envy-17-J100-notebook-PC-series/5401174/model/7200325

• TouchSmart HP Envy 17-j017cl touch screen click on screen by itself

  64-bit Windows 8
  Product number: E9G80UA

  I recently bought about 4 months ago and it's great for a little while. But recently he would make this annoying glitch. The screen would act as if I'm pressing the screen somewhere in the middle of it and selecting whatever it is within its range. This may seem not so bad by the sounds of it, but if you play a video or a website with links in this area it will click on a link or stop/play videos. It is very annoying!

  Troubleshooting: at first I thought that it would be my touchpad, so I made sure that I didn't to it during these periods. But it would still do so even if I'm not in contact with the laptop. So if I use only my wireless mouse to go through Web pages or anything else, he would still do the ghost by clicking.

  I thought then that maybe it's my wireless mouse, so I unplugged the laptop USB receiver and he always does.

  Then I tried to get online with HP technical support and they checked my computer and tried a few things like remove the driver of the touchpad and so on without any results. He finally told me that I have to send it to them for repair (still in warranty). However, I have not the time to send my phone to them for repairs.

  My last thought was to turn off the touch screen. What I did by going to Device Manager and by disabling one of the HIDDEN options. I've had several, so I had to try each of them since none were marked as the touch screen, but only as a HID device. It has worked so far and he has not clicked anywhere yet.

  My question is, is anyone know what I need to do to correct the problem? I thought to update the driver, but I can't find it on the HP site and when I try to update the driver through Device Manager it says he has the best driver available, which most of the time is BS. I guess I just need to know where I can find the right driver for the touch screen.

  Hi Spoon1901,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your computer laptop 17-j017cl TouchSmart from HP ENVY and your touch screen, here's a link to a update the system BIOS. It will help improve the screen problems.

  I hope this helps.

  Thank you.

• WANT to PC dv7: at startup, I get a blue screen with a :( Your PC has encountered a problem and needs to restart.

  While I was using my laptop I received a message that HP was running some sort of program disagnostic and in the end, he asked if I wanted to repair the problems. I declined the offer. However, the next time I turned on the computer, I saw the first time the HP logo, then the message "automatic repair Preparation". After a few seconds there is a short rectangle that flashes on and disappears. Then I got a blue screen with: your PC encountered a problem and needs to restart. We will restart for you. "Who starts a blue screen and reboot cycle. Blue screens replacement error messages saying: "If you want to learn more, you can search online for later for this error" and once it will say 'FAT file system' and once 'NTFS file system. I have spent to support HP dv7 ENVY page and tried the suggestions of repair without success. Is it possible to go beyond these two error messages and their blue screens to get my system working again? If so, how?

  Hello

  Error code 24 characters is a failure of the short test (DST) disk Self and would indicate that hard is defective and must be replaced.  It is also consistent with your description of the problem.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are no longer under warranty, it's a fairly simple procedure to replace the HARD drive yourself - a brief guide on this is below.

  Readers on the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  1 TB laptop hard drive.

  The procedure to replace the hard drive begins on Page 56 of your maintenance & Service Guide.

  About reinstalling Windows 10 on new HARD drive, as long as the previous installation of Windows 10 had activated Ok after upgrading to Windows 7/8.1, you can simply create your own Windows 10 installation media and perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I have not a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Wallpapers flashes a blue screen with a desktop screen

  Product: HP ENVY TouchSmart 15 t-j000 Select Edition CTO Notebook PC, model C9G48AAR, product number: C8P45AV
  Problem: Once connected, the screen flashes start screen randomly and does not respond to any input.
  Effort: We followed the instructions on the HP web site for this symptom (desktop screen will Flash between a blank blue screen with a task bar and a desktop on startup (Windows 8) computer screen), but it failed at step 8 - start screen flashes in Mode safe mode with no way to find or enter step "Control Panel." We have also restored the system to the last restore point, reinstall the memory and reset the BIOS - all the HP recommended processes for video problems.
  Current situation: we have yet to solve problems via the web HP site first; This has left us speechless. We went to the "Contact HP" to discuss with the service agent, but discovered that our warranty expired a week ago. We were directed to the help forum. The laptop is my son and is used for his college course. We need to help, you can provide as quickly as possible. Thank you!

  I have advanced and complete steps 8-14 in the correction procedure from HP, including the center of the Action to "never check solutions" are reduced to problem reports. Then we went ahead and made the Microsoft Updates that were pending since we had it restored to a previous restore point. So far so good! The flashing screen problem is not returned. Until that Microsoft published a fix for this problem, I think that bypass it HP will keep us to leave. Thank you!

  Could I ask a favor? A HP contact named Mason was initially to help us with this problem, but all attmepts to repsond to his e-mails ended in a failure to deliver ("Diagnostic - code 554).

  Case No.: 3008737217
  Mason
  Case manager
  Team of HP AMS TCO

  Can you communicate with him and let him know that the problem has been solved successfulkly? Thank you!

  Warn the looks!
  Bryan

• Black screen with flashing underscore concerns after removal of Rootkit

  HP Envy laptop (Win 7)
  Microsoft Security Essentials identified the Alureon trojan/rootkit, but could not clean after numerous attempts. I downloaded Malwarebytes Anti-Rootkit and it ran. He found and cleaned 3 threats. After completed cleaning, the laptop it will only boot to a black screen with a flashing underscore.

  I can access the boot, BIOS, System Recovery menu, etc. by pressing ESC at startup. However, I can't get into safe mode.

  There is an HP Recovery Manager option in the boot menu (F11) where you can access to Windows system restore, but also a few other options. I tried several restore points. Some boot worked but it is still in the black screen, other has no restore points.

  Thank you

  Hello

  In this case I suggest you select the option 'System of valuation (restore your computer to its original factory State)' - this will reinstall Windows 7, all software drivers and original, and all of the original scores.

  At the beginning of this procedure, you will have the option to backup your files (providing the files have not been corrupted)-this can be done for a connected external HDD or usb flash drives.  A full description of the backup process are under the heading "If you want to back up your personal files, follow these steps to create a back-up" on the following link.

  http://support.HP.com/us-en/document/c01867418

  Once completed, continue with the Factory Reset.

  **************************************************************

  Once the process is complete recovery, you'll always be able to create your 1 set of recovery on a usb flash drive media - the procedure is detailed in the HP document on the following link.

  Create recovery media - Windows 7.

  Best regards

  DP - K

• Blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  I have my Acer 5920 laptop, 2 GB of RAM and 160 hard drive, last stop system time correctly with all the files to day, but when I restart then comes windows XP Jean-Christophe and then a blue screen with the error. Nor I have install new software or remove something in the laptop. My system was perfect, and that was before the last stop.
  I have Windows XP SP2-teacher-pack. I have the original CD of this package.
  But when I use the CD then nothing is happen and come same messgae of error. I do not have any other CD bootable for windowXP except your originalCD.
  Please suggest me what I should do to fix my probem. I'm not to much expert for the formatting and other things computer.

  After reading your following suggession:
  Here are a few things to try:
  The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

  Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

  I got the result of the error that comes on a blue screen after you follow your process-blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  Thanks in advance for help
  What about nice Rajneesh

  Just one quick response for others...

  Go to your bios to change the mode of training of your s - ata AHCI or IDE Compatible mode or all that apply :) Windows XP is not like SATA, because it has no native support for it. At the start of the second phase of a Setup program, it would fail with this BSOD.

  Also read the following Microsoft article that describes many other causes (including file system damage):Troubleshooting of errors "Stop 0x0000007B" in Windows XP Advanced

  Sometimes, your BIOS will provide its default settings after a system crash or a configuration. Should not happen, but it is...

  For BIOS-discussions, see: 0x0000007B 0xBA4cf524 - Forum of Support PC - Free Computer help , XP installation: * STOP: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)? - Page 4 - Cyber Tech Help Support Forums , 0x0000007B (0xBA4CF524 - Google zoeken .)

  Have fun, and... Peace!

  Devvie

  ~ ~ ~ * E-mail address is removed from the privacy * ~ ~ ~

  CONARE nullius momenti videri fortasse missilibus careant
  ------
  All the spelling mistakes are my own and may not be distributed under the GNU General Public License! -(© 95 1 by Coredump; 2-10 by DevNullius)

• Blue screen with message 0X0000008e...:)

  Almost all the time my Virus Scanner (G Data Internetsecurity of 2010) DOE a regular analysis the computer falls down after about 20%. The deadly blue screen comes with the technical info:

  0x0000008E (0xc0000005, 0x8c0e2d25, 0xe4467a8c, 0x00000000

  Syscorr 32vsys

  Address: 8c0e2d25 basic to

  8c0d7000, Datesetup

  48728c1b

  (some letters have been Capitalletters, but I don't know which ones.) Sorry)

  Toulouse you!

  (G Data says it's not their fault...)

  Hello

  Carefully check for malware before you change your antivirus and use the withdrawal of the constructor
  tools and instructions to be sure leftovers are not left which can cause strange problems.

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ------------------------------------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Black screen with cursor when connecting Windows 7. Reinstall the drivers doesn't help not.

  I have a Windows 7 Pro machine that boots to a black screen with a cursor instead of the login prompt, but if I press some keys like enter and tab that I will get a few blue squares where probably windows are appearing.

  I can boot into safe mode and log in. I can then disable or uninstall the video card and the boot into normal windows. But if I install the Intel to the HD3000 integrated video drivers, the black screen will be there waiting for me when I reboot.

  I tried with and without external monitors connected.

  I tried to uninstall the drivers in the menu programs and features (also selection to completely remove the drivers), and I uninstalled them through Device Manager. I then reboot before installing the Intel drivers again. I tried the version on the site Web of Panasonic, as well as the latest version of the Intel Web site. Results have been the same every time.

  Are there left behind somewhere that I could try to remove registry keys? Perhaps a more thorough removal method? Something more creative? All ideas welcome!

  System Specs:

  Panasonic Toughbook CF53 (A)

  Windows 7 Pro 32 bit

  Intel CPU 2520 M w / HD 3000 integrated video

  4 GB OF RAM

  This system has been restored to a standard corporate image, unfortunately is no longer near factory that she'll get. System Restore will not be an option because he has never been in a working state. Startup Repair was not an option due to disk full corporate encryption that seems to make the unreadable disk at this time here. I tried but it fails and I can't find the drivers to be used in the environment of recovery for this BeCrypt Disk Encryption.

  Hi Brian,.

  According to the information that you, as you can start your computer in safe mode without problem, then the problem is probably with the supplied driver. Since the installation of the driver is causing the problem to occur, one possible cause is a driver you want to install is not compatible with the system. We suggest that you contact the manufacturer of your computer for help on installing the correct driver for your PC.

  Kind regards.

• What are compatible with other phones?

  When I submit themes there are several other phones in the same area of the phone that I submit.

  For example: when I submit a theme for Bold 97xx there are four other models of phone (9000, 9050, 9900, 9930) which are an option that I can choose from as well.  If I have marked other phone models, my theme would be compatible with these models?  I ask because they are grouped with the model I selects as well.

  Basically I wonder if all the phone models that are grouped are compatible with each other?

  Phones are grouped in the series (i.e. Bold, Curve series etc.). They are really, for example screen resolution:

  • Half display VGA 480 x 320 pixel color (BlackBerry 9000 "BOLD")
  • Screen color high-resolution 480 x 360 pixels (BlackBerry Bold 9650, 9700, 9780)

  Support for operating system version would be different.

  It seems therefore that the grouping is more related to brand as the specifications of the phone.

• iPhone 7 more stuck on black screen with the spinning wheel

  How can I fix it? I tried to reset, go into DFU mode, recover from iTunes. Nothing works. I can't use iTunes because he wants me to grant access from my iPhone is not responding. DFU mode doesn't work, the screen does not any combination of seconds I hold down the buttons to. This has happened more than an hour. Should I just wait for the battery to die? Please note that I do not live in the United States or the U.K. or anywhere with an Apple Store, I can take it to.

  Thank you

  Hello! I think that I may have a solution to our problem of the black screen with the circle of rotation.

  I came across this post today because my iPhone all nine 7 (which I've upgraded to the latest ios) also got stuck on a black screen with the circle of rotation. I tried to update some of my apps, when suddenly the screen froze. I clicked once on the home button and the screen become black with the subsequent appearance of the circle of rotation.

  I have tried everything - simultaneously press the home button and power (does not work). connected to itunes to do a restore (it won't let me not because my "find my iPhone" was turned on - but I could not turn off because my phone was insensitive).

  In any case, a very useful Mr. Damon (Senior Advisor to Apple) helped me via chat to solve the problem.

  Here's what I did:

  1. make sure that your iPhone is disconnected from the socket or the computer.

  2. hold the POWER button and the VOLUME DOWN button at the same TIME. If it works, the screen should turn off almost immediately.

  3. connect your iPhone to the computer. (when I have connected to the computer, my iPhone automatically on and was ready to be reused).

  The steps below are for those whose iPhones did not turn with the above steps. The following steps are designed to allow you to disable remote your 'find my iPhone', so you can do a manual restore from iTunes.

  4. go to www.icloud.com.

  5. click on Find iPhone

  6. given that the phone is turned off already, he won't be able to find it. On the top bar, click DEVICES.

  7. click on your iPhone.

  8. click on "delete account".

  9. go into your itunes and do a restore.

  I did have to do steps 4 to 9 more, because as I said, my iPhone automatically activated after step 3.

  This really worked for me. I hope this works for everyone else too! Have a great day!