Envy 15 k101tx: after months recovery disk

Similar Questions

• Envy of HP dv7: upgrade of manufacturing after Win10 recovery disks

  After the upgrade to win 8 ot win 10, can I followed the original instructions to create a new set of recovery disks?

  Hello

  HP Recovery Manager only allows you to create 1 set of recovery media for the original operating system supplied with machine.

  However, there is another option, you can use.

  As long as the current installation of Windows 10 has activated Ok after upgrade from 8.1, you can create any media that will allow you to perform a new installation of Windows 10 If you need.

  For a guide on creating it, see the following link.  Note: If you use this option to perform a clean installation of Windows 10, to the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Satellite M30-107 does not start successfully after using recovery disk

  Hello

  I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
  I used the toshiba recovery disk, but after that the laptop is no longer support windows.

  When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
  When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

  Any help or advice would be much appreciated.

  Thank you
  JT

  Hello

  Sounds a little like the laptop does not start because of the problem of Windows software
  You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

  I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

  You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

  In this case we (you and me ;)) might know if this problem could be related to hardware or software.

  Good bye

• Satellite L350D - WLAN does not work after the recovery disk

  Hello

  I just got a L350D. I ran the tool recovery disk, without any other program running. It is on a good way to end the second disc and that: BAM! blue screen. Since start-up, my LAN and WLAN does not work.

  He always says ' WLAN 2.0 bg adapter "to which no driver is found. The driver is a Realtek WLAN and LAN.

  Don't you think that the crash of the WLAN and LAN module fails?

  I tried the things:

  System reset
  Reinstalling the driver

  but nothing has worked.

  Someone at - it advice?

  Thank you very much!

  Mycale

  Hello!

  I put t know what is the reason for this BSOD when installing, but you can post the BSOD code? For example, you can search based on Microsoft Knowledge for this code.

  In addition, I would try to update the BIOS of your laptop that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  After you have updated the BIOS to try to update the WLAN and LAN card driver, or try to reinstall Windows using the Toshiba recovery disc.

  Good bye

• Pravilion dv7 series replaced after the recovery disk hard drive failure

  I tried to use the portion of my drive recovery hard when my laptop Pavilion dv7-4173 US could not operate.  After trying the hard drive recovery part several times I got an error message saying that the bootmgr is missing. I tried using the recovery discs I got to the store, I bought the computer before taking it home, and they failed. They worked up to 32% and then stopped.  I took the laptop and recovery (6 discs) disks to the tech Department of another retail store. After several days, I learned the recovery disc where no good/damaged. When I contacted the store bought told me that I had to bring in the laptop and recovery disks. They replaced the hard drive, saying: that was the problem, but do not partition. They decided to classified until the system OS of Windows 7 Home Premium 64-bit for Windows 7 Professional 64 bit., but did not try the recovery disks. Can I use the recovery disk, they made me, if are good restore the laptop back to factory new?  I know he will place the operating system Windows 7 Home back on the computer, but I want that all return provided with computer programs. I'll be able to upgrade the Professional operating system? I have the disc of Windows 7 Professional.  If my restore disk will not work, can I use the recovery disc, only 2 discs instead of 6, I can buy from HP and then move on to professional?

  Thank you.  Computer to factory fresh.  Just update software and then go to Windows 7 Professional

• Windows update failures after using recovery disks (error A 8024, 000)

  original title: Windows update failures as a result of the use of recovery disk

  I used a recovery disc following a replacement of HDD on my Acer laptop and now windows update will not work.  I get an error A 8024, 000.  I tried the MS fix - it tool, but gives an error when it tries to install as well.

  Hello

  I suggest you to disable any program of security on your computer and check if it solves the problem.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  It will be useful.

• HP ENVY 17 - 1190nr l 3D: recovery disks does not not for HP Envy 17 - 1190nr

  My main HARD drive died. Toshiba 500 GB MK5056GSY was the 'C' drive factory installed. The laptop also has a "D" drive, which was the same exact brand, model and size.  (secondary HARD disk does not work at all. Long story, but I think it is a driver or a hardware problem with the motherboard)

  I overwhelmed the secondary HDD at the location main, reformatted and reinstalled the operating system with the set of recovery DVD 7, SUCCUSSFULLY disks.  But, since I can't have a second HD to wor, I decided to spend the primary HARD disk capacity, so I installed a Seagate 1 TB HARD drive.  Now, I have reinstalled the operating system using the recovery discs 7 DVD and when the 7th finished disc, a window open warning that says "Recovery manager cannot restore your computer using the original image. "Please contact the HP support (Yes right, it's a joke) error code: 0xe0ef000e.

  I also tried to install the operating system with the recovery of a 240 GB SSD disks. Same question.

  BUT, the original secondary drive allows the operating system recovery 7 DVD image reset goes to work.

  WHY?
  
  Finally, if I install a stand alone Windows 7 OS for the new Seagate 1 TB drive, it works fine.  The problem is that all additional drivers, programs etc. provided with the laptop originally are net, just a light version of Windows 7. The works of the OS, but the wireless, the blueetooth, readers of cards, etc. do not work. And missing a few programs that comes with the original image (some are too expensive to buy when I wouldn't need it again).

  Thanks for any idea on this issue.
  HP makes me very angry today.

  Hi there -@Bob,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your recovery discs do not work on your HP ENVY 17 - 1190nr 3D Edition Notebook PC.

  • What is the model/product of the Seagate 1 TB HARD drive?
  • You can enter the BIOS?
  • Can you see the HARD drive in the BIOS?

  If you can, please:

  • Restore the BIOS
  • Press F9 to change the boot sequence to reflect the new hard drive.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• HP ENVY 15-Q006TX TS: create recovery disk

  I use HP ENVY 15-Q006TX with Windows 8.1 TS x 64

  I deleted the recovery partition as well as everything it can how can do a new partition and a new recovery image for installation of windows frsh came straight out of the box

  It's a little too late for that. You said that you have deleted the recovery partition.  That's what the HP recovery media creator would have used to create a recovery media.

  You can buy a HP recovery media or HP partner. the cost is minimal. It is normally @$40,00 USD.  Use the following link.

  http://support.HP.com/us-en/document/bph07143

  You may be able to recover the partition.  See the following video of Britec

• Re-apply Anytime Upgrade license after running recovery disk

  4 years ago, I bought a Toshiba laptop with Windows Home Premium pre-installed, and provided with a Toshiba recovery media. As I need to join a domain but wanted to keep the media center software that I used also provided Express Upgrade disk to upgrade to ultimate. This has been paid at the time and was completely automatic with a "paid" invoice from Toshiba, which is the only element received.

  Due to lack of space etc. I replaced the HARD drive, before doing so in order to become a record of the license key encrypted so I could reinstall. However, the recovery disc will reinstall only Home Premium with the embedded OEM key and does not offer the possibility to enter the spare key. Other forums have indicated that all I have to do is to run the utility to upgrade Express again where I would get the opportunity to get the software, I paid for. All that is to offer a screen to compare the different versions of Vista that connects me in turn to a web page of MS indicating that the Service at any time update for Vista has been suspended, the upgrade to Windows 7 instead.

  I can't use the upgrade Express disk I received with the laptop to find out if that would work, as the drive had a crack in it and no longer charges originally.

  My questions are, how to reapply the key to get my system up to the ultimate and that should I have received from Toshiba when I bought the upgrade?

  Please see: How to replace Microsoft software

  Carey Frisch

• Satellite Pro C650: Questions regarding the installation of recovery disk

  Hello

  can someone give me some help please?
  I will have to purchase and install a recovery for my C650 Pro Sat disc.
  When I get it I just plug and play. I also lost windows 7 which was preinstalled, or I can also to buy a new copy of windows 7 and install it too?

  It will then just go back to how it was when we brought.
  Or should I do something else after the recovery disk is installed.

  Thank you
  Tina

  Hi Tina

  You must boot from the recovery disk to put the laptop in the same State as on the first day of purchase.

  The Toshiba Recovery disk format the whole HARD drive and automatically installs Windows 7, Toshiba tools and utilities, drivers, therefore, boot from that disk and you will need to follow the instructions on the screen.

  Welcome them

• Dv7 - 7333cl envy: Boot Device not found (3FO) after 8 of Windows Restalling of recovery disks

  Hello

  The hard drive on my dv7 desire - 7333cl just died after upgrading my windows 8.1 to 10. I bought a new SSD and I replaced the drive. I could not find the recovery discs, that I did when I got the PC, so I ordered new HP according to the recommendations of other threads with the understanding that they would be able to reinstall windows on the new drive.

  Given the shipping time would take a long time, until I tried to reinstall Windows 8.1 using the file .iso Windows 8.1 image official of Microsoft. It seemed to install properly, read the product automatically key and everything, but I could not get the machine to start, so I decided to wait for the HP recovery discs.

  Well I had the disc a few days ago and reinstalled the original image on the new drive. Problem is that when the computer reboots, I get error no matter what I try. The errors vary according to which of the steps I tried below, but I was never able to start Windows, except once when the Windows 8 BSOD loops and restarts automatically before I can even read.

  Here are the steps I've already tried:

  -Performed a hard reset (power adapter and battery removed, taking the power for 30 seconds button)

  -Run the diagnostic system HP based on the SSD (spent) and memory (spent)

  -Secure boot disabled (and re-enabled, cleared the keys, keys reloaded, etc.)

  -Enabled legacy support (and disabled)

  -Bios reset to original settings (F9) is then repeat above steps in various orders

  -Reinstalled two times more than original image

  At this point, I was wondering if the drive has not been formatted from the recovery disk and multiple files to start causing problems, so I started in Parted Magic with UBCD and reformatted the entire hard drive (0 s to write to disc) and again reinstalled original image. Still nothing so I told all the steps above in random orders to try to turn it on.

  If I start in the boot options, I can see the SSD, but it still won't start. Does anyone have more ideas for me to try? The fact that it passes all the tests and that it is running the Linux of Parted Magic environment suggests that everything works fine, but for some reason any Boot file does not load.

  Did I lose money on the HP recovery discs and he just bought my own Windows OEM license?

  I'm going crazy trying to figure this out. I am relatively experienced with the PC, but it's my first time work with the architecture of the UEFI Windows 8 so maybe there is something obvious that I'm missing?

  Thanks for any help.

  FINALLY SUCCESS!

  After a lot of frustration and several reboots, partitions, reinstall, and trips to Best Buy, that I care to remember I'm typing this from my stable work feel LIKE to the point Windows 8.1. Currently 10 Windows to download and install all updates, but everything seems to be stable.

  To make a long story short:

  -Be sure to carefully read the product manual

  I never would have guessed that this system would support only a 160 or 180 GB SSD. If I had of known that I would have probably never had any serious problems.

  -Instead of order recovery HP discs just to download the ISO of Windows 8

  I'm not the first person to have problems with these discs (search this forum for the many complaints), so unless desperately want the included HP tools and bloat, just to get a file from Microsoft (FREE!). There is no reason why it shouldn't work and I wish I would have went with my gut here and saved a bit of money.

  -Be persistent if you can't find the question

  I was told, many people, that the machine was bricked up. At that time, I was obsessed with the implementation because no one could tell me why it would not.

  Thanks for reading! And if you encounter a similar error, good luck.

• Cannot install SP3 as it crashes even after recovering the computer by using a recovery disk

  I recently had an accident requiring that I reboot using my restore disk that were made when I first came to this computer. Since the restart, I can't access the updates from Microsoft Updates program. No error message, tells me that I can not connect. After several attempts, I think that the problem lies in the validation of the Windows program I use. I tried manually to run the validation program and to download security patches I've saved previous accidents. I show that SP2 is underway. I have a standalone download SP3, that when I upload in the system, crashes and burns. Back to the same thing, restart using the recovery disk. I realize for XP ends next month and its time to upgrade. But I would like to have this machine in working condition to use for other tasks.

  Original title: update XP

  You are a candidate for this patch before installing SP3...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&DLC=en&softwareitem=PV-60484-2

  .. you are if your PC is a HP Pavilion and Presario, Media Center and has an AMD processor.

  To find out if you have an AMD processor...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Your processor type is shown in the computer: section (see below)

  You can do a restore of the system in safe mode to get rid of the SP3...

  http://support.Microsoft.com/kb/306084/en-GB

  .. .or do another cover.

  Tricky

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• System restore after the recovery running disk

  Hello

  Is there a way to restore my system to previous state after you run recovery disk?

  I forgot to backup my files and apparently lost my data after the recovery running disc. All suggestions will be appreciated. I'm trying to restore my system, but it is not restoration, its shows me only today's date.

  Best regards

  Hello Jazz

  Please slow down. Your ad is quite confusing. You can the prior words includes on two completely different ways.

  (1) previous state as factory settings. If you use recovery media is removed from the entire HARD disk and all data will be lost. There is no way to recover them. To the review no data more.
  (2) previous state by using System Restore tool. It will roll back OS time earlier, but all data will be there. Sorry, but if you have ever used recovery media, it's too late for this option.

• Envy 17 k299nb: Windows 8.1 on "new" laptop wants the recovery disk 32 GB

  Hello

  Bandnew laptop, turned on for the first time.
  First thing I want to do after installation, is to make a recovery disk.
  When you choose this option, the laptop wonder a 32 GB flash drive 'at least'.
  How can this be since it has "new"?

  And more importantly, how I can reduce this amount of memory needed?

  Access performance and USB drive is so terrible in this notebook I have to wait for hours!

  THX

  This has nothing to do with the laptop being new. It is just a part of the initial report of installation and can be ignored for now, if you don't not available now.    Just remember you need to do the recovery at some point media.

  You can skip the creation now and create it later.

  If you want to have external recovery media access, then you will need to follow the guests will tell you. Do not save anything in the recovery partition!

  You can access more later by invoking the charm of research and typing in HP recovery. Click the icon to create HP recovery media to start the process.

  It won't take hours to make the usb recovery media. Access USB is fast, especially compared to the access of the DVD media.