ENVY 4500 - e-all-in-one: get the printer connected and online

Similar Questions

• HP ENVY 4500 E - ALL - IN - ONE: HP ENVY 4500 E - ALL - IN - ONE DOES NOT PRINT

  I can't print from my desktop PC with an ethernet connection, but I am able to print from my laptop with a Wi - Fi connection.

  The printer used to work on my desktop PC, then I upgraded to Windows 10, made the operating system was not entirely compatible with my PC, reformatted it with the help of remote support Microsoft, back to Windows 7, had a lot of problems with Windows Update and WIndows Installer and so also with the installation of the driver.

  I tried installing from the original installation CD HP Envy with no luck, uninstalled and reinstalled with the latest driver from the HP website with no luck and since (apparently) to solve the problem with Windows Update and WIndows Installer, uninstalled and reinstalled the driver software on the CD again with no luck.

  I tried all the suggestions on the forums, with my computer hang too for the first time in weeks at the recommendation of msconfig on your forum for disabling startup programs.

  The scanner works.

  Sometimes, in Word, I get a message error "Windows cannot print due to a problem with the current printer setup". Sometimes I have no message.

  (I use Service Pack 1)

  Hi HPAGJ,

  Thank you for coming back to us.

  Gemini02 is currently out of the office so I thought jump in and help.

  When you run the PSDR, have you selected the connection "network (192.168.2.107) is not installed? Being not fully installed is causing the problem.

  There is corruption on the computer, this can certainly occur after you upgrade your operating system. I suggest to try the following steps in the following order for best results.

  • Make sure that all of your Windows updates are up-to-date.
  • HP printers - uninstalling the software of the printer (Windows)
  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  Manually delete the print driver:

  This problem occurs if there is printer drivers are corrupt.
  I suggest that you remove all installed printers and reinstall Windows 7 printer drivers if available.
    
  Remove a printer
  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.
  2 find the printers installed icons, then delete them.
  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".
  4. on the tab drivers, select them printers list and click Remove. Please, select Remove driver and driver package.
  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".
  6. try to remove all related printer software.
  If the problem is not resolved, I suggest that you clear the money printing system.

  Step 1
  ======
  Start Windows Explorer, and then rename all the files and folders in the following two folders:
  c:\windows\system32\spool\drivers\w32X86
  To rename a file, we can click with the right button on the file and select Rename.
   
  Step 2
  ======
  1. Click Start, type REGEDIT in the start search bar and then press ENTER.
  2. navigate to and then click the following registry key:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86
  View the list of subkeys. There should be only the following subkeys:
   
  Drivers
  Print processors
  If there are any keys other than those listed above, follow these steps:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type WindowsNTx86regkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than drivers and print processors.
   
  Step 3
  ======
  Find and click the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key. View the list of subkeys. There should be only the following subkeys:
  BJ language monitor
  The local port
  Microsoft Document Imaging writer monitor
  Microsoft Shared Fax Monitor
  Standard TCP/IP port
  USB Monitor
  WSD port
  If there are any keys other than those listed above, follow these steps to remove them:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type Monitorsregkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than the above 5.
   
  Step 4. Disconnect the printer from the computer and restart the computer.
   
  Step 5. Reconnect the cable from the printer to the computer, install the printer according to the manufacturer's installation instructions and then check if the problem persists.
   
  You can also use these two articles for this problem:
  http://support.Microsoft.com/kb/2000007
  http://support.Microsoft.com/kb/933454

  • Download HP ENVY 4500 e-all-in-One Printer series full feature software and drivers.

  If you are still having problems try:

  • HP print driver printer - install and use the built-in Windows

  If all else fails, I create a new administrator account and try to reinstall:

  • The difficulty of a user profile is corrupted.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Envy 4500 e-all-in-one Seri: scanning multipe pages in a document file

  I'm trying to scan multiple pages in a document file. I am currently using Windows 10. What are the steps to do this successfully.

  Hello

  Thank you for using the forum.

  To use the Scan software on your printer, you will need to download and install the printer driver.

  We recommend that you download the full features and it can be found here:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have installed the software, you can click the icon for the printer on the desktop and it will bring up the HP Printer Wizard and you can use the Scan software.

  You will first need to scan more than one page, select "Save as PDF".

  Once you've scanned the first page, in order to scan several pages, you will need to click on 'Add page' (as shown)

  

  When you are finished, you can save the document.

  Here are several videos giving you good advice on digitization (printers in the videos are using the same software to Scan as your HP Envy 4500)

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  Scanning tips:

  HP Officejet Pro 8630

  https://goo.GL/fjZvqM

  HP Deskjet 2540 scanning tips

  https://goo.GL/qfQyf4

  Hope that helps.

  Please click on the "Bravo Thumbs up" If this has helped you and 'Accept as solution' If this helped solved your problem.

• HP Envy 4500 e-all-in-one: 0XB0595DD2 error Code

  Hello

  Can anyone help identify this error code and a possible resolution? I plugged my printer yesterday and the 0XB0595DD2 error message came immediately. I turned the printer on and off a few times, but it happens every time (the printer was not connected to my laptop). My printer is the: HP Envy 4500 e-all-in-one, model no SD-GOB-1301.

  Thank you.

  Reference:

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/do-you-have-an-ink-system-failure-0xC-error-message/TD-p/740567

• HP Envy 4500 e-all-in-one: HP Envy 4500 print size

  Since I installed this HP Envy 4500 e-all-in-one printer, it prints in small text. I went to tools, options and preferences and can't seem to find a way to change the print size. Any suggestions? Thanx

  Hi @husky52358,

  Thank you for visiting the Forums from the HP Support! I see when you print to your HP Envy 4500 text is very short, you tried to go into the preferences and options without success.

  You try to print a document or an element of a web page? What program or browser you use?

  If you are using a Windows operating system, please try the following:

  1. open an Internet Explorer browser, go to the far right click on the gear icon

  2. Select Print Preview

  3. now along the top, you will see an option to change the size of the page, please make sure that it is set to adjust or 100%.

  4. now, try a test page, the text is expanded?

  Now go ahead and run the HP Print and Scan Doctor:

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know the results.

• HP Envy 4500-e all-in-one: scan PDF

  If I analyze the PDF document, I have to key in the "HP Print Wizard - Scan - PDF". Is there a way to shotener to do this?

  Hi @ekag,

  Welcome to the Forums of HP Support!

  I noticed that you wonder if there is a faster way to scan a PDF document with your HP ENVY 4500 e-all-in-one printer. I'd be happy to help you with this.

  What I recommend that we do is to add the HP scanning icon to the taskbar.

  To do this: Open file by dragging it from the edge Explorer screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), registering file Explorer in the area of research and then by typing or clicking on File Explorer. Source

• HP ENVY 4500 e-all-in-one printer/Mac OS 10.6 / cannot scan multiple pages in the single file/document

  Mac OS X 10.6.8

  HP Scan app 4.4.1

  In the ENVY of HP printer 4500 e-all-in-one support page for scanning with a full feature driver installed. Under "how to scan an original of several page into one file for HP Scan version 4.0 of the software. Everything is okay until after I scanned the documents and click on 'Done '. (Step 6) & click send , click the folder , name your file, and then save the file on the computer. (Step # 7)

  Is where I'm going wrong. I can't find the Format drop-down to complete steps 8 and 9.

  1. Click the dropdown Format menu, select the content , and then check the box to Save all items in a single file .
  2. Click Save .

  Hi milolo,

  Thanks for your post and welcome to the HP Forum.

  Please make sure that you select PDF or searchable PDF as the Format. You should then find a box to check the 'combined in one document.

• ENVY 4500 e-All-in-One-Series: 4500 want don't scan text to produce a searchable PDF file

  I used to have a printer Photosmart 4400 C that would allow me to scan to produce searchable PDF files, i.e. I could select letters or words in a text selection tool in my PDF reader.   Today, I just bought a DESIRE 4500 e-All-in-One-Series.  It will scan only text to give me a graphic PDF that is not searchable.  I've updated to the latest version of the EN4500_198.exe driver, but it does not help.

  Does anyone have a solution?

  Hello

  No, the 4500 desire doesn't have any default OCR software, you will have to pay for the software and believe it or not, that the software is more expensive than the printer itself. You can buy the software or you can try to use some free software around:

  http://www.techsupportalert.com/best-free-OCR-software.htm

  Kind regards

• HP Envy 4500 e - all-in - One Series

  I have successfully installed the printer software and received instructions to set up printer, with the claim code.  I created an account on the site Web HP connected and click on the devices tab, but the only thing on this page is a Printers tab, do not add a device tab.  I tried several times without different results.  I can't enter my claim code, and my table of 24 hour time runs out.  Is there anything else I can do?

  Hi, I am at a loss to explain why you do not see additional connected a device button in the tab devices when you are connected to your HP account. If you are located in the United States, you can call the Cloud Services on 855-785-2777 support team to see if they can solve that problem for you.

  Regarding the other issue you describe, have you tried to reinstall the software again? A it is solved the problem of not completing the print jobs? You also mention that you have downloaded and installed the HP Print & Scan doctor but utility that your computer will not open it. It's on the 8.1 Windows machine? If so, make sure that you download the latest version of the tool from this Web page. I don't know why your computer is supported its corrupt. Maybe try again to it and if it happens a second time after back and I'll do some research. To remove the file just do a search on the computer for it and send it to the trash.

  Best

• OfficeJet 7310 all-in-One: activate the Web Services and printing of Tablet

  I can't find a way to enable Web Services on my 7310 all-in-One.  It is connected by wire to my internet router, and I use the built-in print server.  ePrint online information, says this printer is supported.  When I go into the ePrintCenter registration page, or when I go into the app on my Android tablet, it won't give me an option to manually enter the printer and can't find the printer on my home network.  All this suggests that I should update the firmware of the print server, but I can't find a way to do it.  Any help would be welcome.

  Ok. I found my own solution, but the documentation is really bad.

  The answer is: If you select document, it gives you the choice of the printer on the wireless network, even when not compatible eprint. But who knows? I would have thought to implement a printer first.

• 5742 HPOficejet e-all-in-one: retain default printer Fax and Photo paper tray

  Hello.

  The printer keeps failing for FAX and paper in the photo tray.  How can I fix this in windows Vista?

  Hello @Vanessa3,

  Welcome to the Forums of HP Support!

  I understand that when you print from your Windows Vista-based computer to your HP Officejet 5742 e-all-in-one printer the screen 'Fax' is popping up and the incorrect paper tray / support is selected. I would like to help you today to address these issues. If the "Send faxes" window appears only when you print to a specific program, there is probably a setting must be adjusted under this specific programme. If this is the case, what program are you a victim of problems when printing?  If the 'Send of Fax' window is popping up under all programs that you print from your computer, it is likely that the wrong printer is selected as the default printer in the printers and devices window. Can I please you follow the steps below to fix this problem.

  Set the default printer:

  1. Click on the Start menu
  2. Select the devices and printers or Printers (you may need to access it via Control Panel)
  3. Under the Printers folder, locate your HP Officejet 5742 e-all-in-one. This printer should display a green check mark above to indicate that it is the default printer.
  4. If your Fax-HP Officejet 5742 e-all-in-one shows like check mark on this subject, please right click on HP Officejet 5742 e-all-in-one (printer) and left click on "default".

  Once the correct printer has been confirmed as the default printer please test print to confirm that the 'Fax' problem is solved.

  Once solve us the problem of Fax, we will be able to adjust your print settings to confirm that your printer is configured to print on the correct paper and with appropriate support tray.

  How to check the paper tray settings:

  1. Click on the Start menu
  2. Select the devices and printers or Printers (you may need to access it via Control Panel)
  3. Under the Printers folder, locate your HP Officejet 5742 e-all-in-one
  4. Right click on the HP Officejet
  5. Left click on Printing Preferences
  6. On the paper/quality tab, make sure that the Paper Source is set to main tray
  7. Also, ensure that the media is set on plain white paper (if that's what you print on)
  8. Click apply and OK
  9. Close the Printers folder
  10. Try to print a document to confirm that your HP Officejet prints from the correct tray.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP ENVY 4500 e-all-in-one: cartridges and country

  History:

  My father-in-law is living in Belgium, near the border.  He went to Holland for shopping sow, a promotion for a HP Envy printer and purchased.  Simple.  Then when I was visiting him, he asked me to install the printer.  I tried and it sucked!

  Following the installation guide (a double-sided with only the images page), I removed the protection, under voltage, chose my country (Belgium), discovered the heads of cartridges and insert cartridges.  But the printer screen showed a message explaining that the cartridges were not intended for this printer.  They came out of the box the printer!

  So time to seek the support of troubleshooting.  And I found this page http://support.hp.com/us-en/document/c02558798 explaining all the evils that you get if you cross a border with a HP product!

  Assuming that the problem is related to this wonderful device...

  WHY should I select a country?

  WHY is there no clear warning on the box as 'to be used only for the Netherlands?

  If the problem has some other cause...

  WHERE can I find real support of troubleshooting?

  Conclusion:

  What is the lesson?

  So far: do not buy the product HP more

  While HP regionalize some inkjet products, the Belgium and the Netherlands are in the same region and use the same cartridges HP 301 in the Envy 4500 printer.

  The question that you see is unrelated to the regionalization.  It is possible, that there is one grain of paper dust or other debris on the electrical contacts.  I would suggest the steps of troubleshooting in the paper here.  If this does not resolve the issue please contact HP.

  From a post of Sunshyn2005, contact technical support HP see the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
   
  File number and phone number are displayed.  Call the phone number provided and forestry of the number of the folder that you created.

• HP ENVY 4500 e-all-in-one: / reduction on desire

  I have HP ENVY 4500.  How do you reduce a copy?

  Hello

  His manual (page 35):

  In the copy menu, press up and down to select among settings.
  ● Paper Type: selects the paper size and paper type. A framework of ordinary paper is printed in normal plain paper print quality. A parameter of photo paper will be printed in the highest quality of photo paper.
  ● Resize: Actual size made a copy that is identical to the size of the original, but the margins of the copied image can be cut. Resize to fit makes a copy which is centred with a white border around the edges. The resized image is enlarged or reduced to fit the size of the output document selected. Custom size allows you to increase the size of the image by selecting a value greater than 100%, or reduce the size of the image by selecting values lower than 100%.
  ● ID Copy: Allows you to copy both sides of the IDENTITY card and in the print paper.
  ● lighter / darker: Adjusts the settings of copy to make copies lighter or darker.

  Source: http://h10032.www1.hp.com/ctg/Manual/c03784120.pdf

  Kind regards.

• HP Deskjet 3052 a e-all-in-one: update the printer software

  I have I already know the answer to this question, but I'll ask anyway.  I have a printer HP Deskjet 3052 J611G e-all-in-one has.  My computer is running Windows 7 Home Premium.   I want to upgrade to Windows 10, but the printer I have is not compatible.  I look for updated software for the printer but can't find anything whatsoever.  Is it possible to upgrade my printer software or am I condemned to buy a new printer?

  Thank you for your time

  Spoiler (Highlight to read)

   

   

  Hello

  Your printer is compatible with Windows 10. the drivers can be downloaded from this link:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3050A-e-all-in-one-printer-series---J6/4311836/model/5061072

  Don't forget to click on the button to change, and then select Windows 10 in the selection of the BONE at the top.

  Shlomi

• HP Officejet 7310 all-in-one: on the printed page without is not the margin settings and are shredded

  During a few days ago only, printer started the show message paper jam when the printed page was all but probably 1/8 "already out.  Flicking the paper really brought the page on the rest of the way.

  I remove the paper two-sided accessory to find any paper, but there is no paper jam that I can see.

  Also, in the middle of printing, sometimes it makes a loud squeaking (I guess), but kept in printing and sends the page completely.

  Then I started to notice that the left margin could tilt inward I look towards the bottom of the page or it can be different from one Word page to another and a blur occurs in a word here and there.

  Finally, on the printing of Excel pages, I see a different left margin on what I consider every 2 lines.  This, of course, affect the right margin in the same Manor, and the vertical cell lines also vary according to the variation in the left margin.

  The HP software tells me there is no update for me to download.  However, I do know she never talked about everything.  I have not seen this specific problem listed.

  @Sunny-Gal Hello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are experiencing printing problems. I would like to help!

  I suggest to remove the cartridges and perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I recommend also to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!