HP Deskjet 3052 a e-all-in-one: update the printer software

Similar Questions

• HP Officejet 7310 all-in-one: on the printed page without is not the margin settings and are shredded

  During a few days ago only, printer started the show message paper jam when the printed page was all but probably 1/8 "already out.  Flicking the paper really brought the page on the rest of the way.

  I remove the paper two-sided accessory to find any paper, but there is no paper jam that I can see.

  Also, in the middle of printing, sometimes it makes a loud squeaking (I guess), but kept in printing and sends the page completely.

  Then I started to notice that the left margin could tilt inward I look towards the bottom of the page or it can be different from one Word page to another and a blur occurs in a word here and there.

  Finally, on the printing of Excel pages, I see a different left margin on what I consider every 2 lines.  This, of course, affect the right margin in the same Manor, and the vertical cell lines also vary according to the variation in the left margin.

  The HP software tells me there is no update for me to download.  However, I do know she never talked about everything.  I have not seen this specific problem listed.

  @Sunny-Gal Hello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are experiencing printing problems. I would like to help!

  I suggest to remove the cartridges and perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I recommend also to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP Officejet J4580 all-in-One: where the printer cartridges are located

  Where are the cartridges of printers that are located on the HP Oficejet J4580 all-in-One printer

  The ink cartridges are located inside the printer. Go here... http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645099/manuals download the User Guide and read page 10 for see where.

• ENVY 4500 - e-all-in-one: get the printer connected and online

  I just bought a HP ENVY 450 e-all-in-one printer and followed all the instructions. Now when I try to print anything, I like the printer if 'offline '. When I IM in devices and printers, the printer appears as offline and not connected. How to make it online and functional?

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• Photosmart all-in-one 5524: 5524 printing software can be installed in windows 10

  Hp for 5524 software can be installed in windows 10

  Hi, thank you very much for your comments, it seems to work now that I realised your suggestions.

• HP Deskjet 2540 All In One: Unable to print color?

  I have a Deskjet 2540 brand new all-in-One. Printer is delivered without any instruction manual. How to print color? I hit 'print' of my document and it comes out in black and white. When I type on the printer, the 'color' button, it draws just a piece of paper through the unit and nothing is displayed at all. I do not understand this crazy thing. My old printer didn't need me to tell it to print color or black and white, that he knew what was coming through the system. I'm about to make this thing.

  Thanks, actually it would print test print color, just not when I tried to get a print document in color. new printer, new cartridges. Change my selection of the printer of HP Deskjet 2540 2540 Deskjet series just seemed to settle, I don't know why. I just mention it here in case other Mac users have the same problem.

• The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function?

  The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function? I installed the full version of the software, and this isn't a scan option, only standard PDF. If it is not included with the not on this model is an alternative HP printer software that would work with this printer and if not, is there an all HP designed for home or small office printers still have this feature?

  Hello

  Please visit the following link:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/does-the-HP-OfficeJet-4620-e-all-in-one-printer-software/m-p/2821615

  Kind regards.

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Deskjet Ink Advantage 2515: HP Deskjet Ink Advantage 2515 all-in-One Printer - software for scanning will not open

  I'm having the "HP Deskjet Ink Advantage 2515 all-in-One Printer" for more than a year now.

  I was previously using Windows 7 Ultimate and there is no problem.

  I did a clean install of Windows 7 SP1 Ultimate and then installed the HP software.

  The printer function works perfectly.

  The only problem is that the software of the Scanner itself does not open.

  Measures taken to correct.

  (1) uninstalled the drivers and the HP printing software. Rebooted the system and did a clean installation of the printer software and drivers who stood on the site of HP.

  (2) Ran "HP print and Scan Doctor", it says "Windows (WIA) Scan Error".

  Don't know what that means. Please help to guide how to correctly do the work of the Scanner Software.

  Thank you best regards &,.

  AJ

  Hi @AJ_Gem,.

  I see you have some analytical problems after doing a clean install of Windows 7 SP1 Ultimate. I would like to help you today.

  The WIA drivers are part of the Windows operating system.

  Run this made it Microsoft tool to see if it will solve this problem.

  Diagnose and automatically repair Windows files and records issues.

  I tabled this document, just to make sure they are the same ones you had checked.

  This document is to check the services of Windows Image Acquisition (WIA).

  Windows: Digitization of HP Software Does not open or Scan to a printer using a USB connection.

  Do not take into account the title.

  Proceed to Solution 3: check the Windows Image Acquisition (WIA) services.

  Temporarily, run Antivirus software and try to scan the image.

  If the problem persists, download and try to repair the WIA drivers. If you don't feel able to do these steps, you can contact the computer manufacturer or Microsoft to solve the error WIA.

  Back up the registry first.

  How to back up and restore the registry in Windows.

  Restore default startup for Windows Image Acquisition (WIA) Type.

  Please let me know the results.

  Thank you.

• HP Deskjet 1056 (all-in-one) do not print all of a sudden

  Thank you in advance for your answers and direction.

  For some reason, I could not get my PC to print at all (no test do pages either). I just rebuilt my PC with Windows 7, I have done this literally 100 times before and have never encountered this dilemma. I installed the software from the manufacturer's Cd, all right. Installation was made initially with the USB unplugged and then plugged when requested by the software. Each attempt to print (including test pages) sends in Quebec City and then times out with a non-specific error. I used the printer software HP and doctor Scan and sometimes (I tried 4 times) it will be just "hang" on the field "communication with the device. Other times it crashes through showing all green checkmarks in this software not showing no conflict (this is while I try to print a test with no results page). I downloaded what I believe to be the latest drivers from HP (DJ1050_J410_1313). After you have uninstalled the original software CD, I installed the new drivers in the same way with still no joy. The last known response seen on my PC was the "door" was closed and had to be opened to print (it was the announcement several days ago). So, I seem to be communication, when I opened the inner door to access the ink cartridges during printing, the HP software warning me to close the doors to continue printing done burst upward (which was just my attempt at troubleshooting if there is a communication between the printer and my PC). I tried printing, Outlook, Word, Notepad, HP software, email (online) all with the same events that results. My printer is set by default. Also set on USB001 Virtual Print Driver with my usb port (how hard, it is connected to my PC). I have tried to change the main usb wire with another, still communication, but not printing. I'm not completely PC illiterate, but I have to admit no small degree of frustration and loss of meaning.

  Any help would be greatly appreciated.

  I tried just a drain of my registry to verify there is no conflict with drivers or double entries and found nothing. Cleaned all register the same and attempt to print a Word document and still the same results.

  I realized I should explain some of the other things I've tried: restart the PC (twice). Restart the print spooler in Services. Back by unplugging the power cord and wait 15 seconds to connect.  Dance a jig, walk around my chair... everything you can think back on this printer (well... maybe not that extreme, it feels just like that)

  Thank you once again

  Hi @mrewho

  I know that this can be a frustrating experience, I'm happy to work through it with you. In a first time ice it seems you have done everything but yell at the Moon, I mean you did a jig, that should do the trick!

  You have the printer USB cable connected to a 2.0 or a 3.0 on the computer port? I'm sure you know the difference, but for the other members of the community who may refer to our conversation of help, here's an image to see what to look for;

  

  3.0 ports are supposed to be backwards compatible, but I've seen problems occur when they are used for printers.

  If you are already connected to a 2.0 port we can try something else, I don't think not that you tried again, the printer Installation Wizard. I know that you have uninstalled and reinstalled several times between the jigs and indirect Chair, but have you tried the printer Install Wizard (PIW)?

  If no, please uninstall your software again, then remove the server properties if driver is have not deleted during the uninstallation, then use the PIW.

  1. The new software - uninstall the printer software Instructions

  2. 1. in the folder "devices and printers".

     2. choose "print server properties.

     • Win XP - with no printer selected, click 'File' then 'server properties '.
     • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
     • Windows 7/8 and 8.1 - Select any printer in the "Devices and printers" folder and click on "Print server properties" above.

     3. click on the "Drivers" tab at the top of the window "properties of the print server.

     4. choose the printer that you want to uninstall, and then click 'remove '.

     5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

• Download and run the HP printer install wizard for Windows

Please go back to let me know if that fixes the problem, thanks. Fingers crossed!

• Printer HP 3050 J610 series all in one will not print any documents

  I'm on Windows 7 Service pack 1 and I have a HP Deskjet 3050 J610 Series All - In - One Printer.it is not wireless I use a USB port for printing.   I have problems printing pdf files as well as Word documents.  I uninstalled and reinstalled the software and drivers; I have restarted my computer several times; I tried the scan doctor and he says everything is fine.  It prints the test pages.  When I press the icon of the printer, it will save the file even if the file is saved to alread. I'm going to planet and save the file again.  I noticed that, for files, it says printer and no .doc or .pdF files.  He also says that it is offline.  I tried the steps recommended for this suggestion has as well and still have problems printing.  The I am trying to print the files aren't new documents except one which is a pdf file.  I hope you can help me.  The window pop up that appears just before printing a 0% for printing.  I hope that makes sense.

  Thank you.

  Maria Holloway

  HI Maria, welcome to the forums

  I noticed your post about the problem you are having with your Deskjet 3050, printing via a USB with Windows 7. I have some suggestions that I would like to offer that can help!

  Perform a clean boot and make sure that your firewall is disabled: Disabling and Re-enabling your software firewall in Windows.

  By this stage and test print while the start up programs and the firewall is disabled, it will show if the mobility programmes have been the origin of the problem.

  Now try to print a document as one. PDF or. DOC.

  If it does not, as a workaround option, try to save documents that you have an impression of question as a different file (do not use in .doc or .pdf format) type.

  Open Word or Adobe and print a blank page (without saving the document) to see if you have a problem with printing.

  Please let me know the results, I hope that my information helped!

  Have a great Wednesday

• The printer software e-all-in-one HP Officejet 4620 includes scan-to-searchable PDF function?

  The printer software e-all-in-one HP Officejet 4620 includes scan-to-searchable PDF function? If not, all printers HP still have this feature?

  Hello

  Please try the following alternative:

  http://www.PDFCore.com/p01_advancedpdfutilitiesfree/feature_09.html

  Kind regards.

• 23 envy d027c All In One with the card mother Lavaca3-SB IPISB - NK. How to upgrade the video card?

  I have a HP Envy 23 d027c All In One with the card mother Lavaca3-SB (pegatron) IPISB-NK.  It has a PCI slot available for upgrade of the video.  I want to do this.  I intend to use the pc for video processing and maybe a few games.

  How to pass the video?

  What cards are best for this system?

  What has changed in the BIOS or other settings I should do?  How can I get them?

  Thank you

  Art

  The PCIe MXM slot is for HP install graphics cards in some models CTO (configure-to-order). Without the card installed when you purchased the computer, there the fan and radiator bad sets. You will need to buy a graphics card and the heatsink / fan of HP to try to upgrade the GPU in your computer. There is an extensive disassembly involved in this procedure. All-in-One computers have much more in common with laptops than they do with traditional desktop computers.

  Honestly, if you want to do video processing and games... you should get a traditional desktop with enough CPU and GPU for these activities.

  Please click the White Star of KUDOS to show your appreciation

• My Officejet 6500 E709 all in one will not print black.

  My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

  Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

  Hope this helps you with your problem.

• My HP Photosmart C5180 all-in-one will not print text correctly in black, color print very well.

  My HP Photosmart C5180 all-in-One does not print black without be eliminated text or streaks in the text. Will print fine text color.

  Have tried all the "patches" you list and much more. The printer prints fine on my old PC Windows XP and worked fine on my

  new PC using Windows 7 until recently.

  Please don't tell me to... Reinstall, download the new driver, install the new cartridge, clean align the print heads, different paper or go to 'solutions '... Etc... Etc.  I HAVE ALREADY BEEN THERE AND DONE THAT!

  Everything you "patches" end with 'the unit of service... " WHAT IN THE WORLD WHAT THAT MEANS!

  This has been a nice printer for more than 5 years, but is somewhat glitch spoil me when using the BLACK INK?

  Gordon,

  Thanks for the reply, expecting not one, but what you say is all that we need to buy another printer if we did all the "fixes", etc... etc. you know that take a printer to a repair shop will cost more

  then buy a new one.

  It was stupid of saying me to check on the warraty of HP page when I already told you that the unit is 5 years old.

  But don't thank you for the reply... even if it was a joke!