ENVY 850-065se DT (Viking) MORE: want MORE 850-065se DT (Viking)

Similar Questions

• HP Envy 850-065SE: memory upgrade problem

  HP computer: Envy 850-065SE (memory 4 locations)

  Memory: G.SKILL RIPJAWS V F4-2133C15D-32GVR DDR4-2133 CL 15-15-15-36 v 1.2 2 * 16GB

  I just bought 32 GB (2 * 16) G.SKILL RIPJAWS V F4-2133C15D-32GVR DDR4-2133 CL 15-15-15-36 v 1.2 memory to upgrade my HP desktop computer (model 850-065SE of envy). My office has a HP mother 2B3A and i7 - 5820 k and HaswellE chipset. The memory of the plant is of Samsung brand with configuration DDR4-2133.

  When I replaced the memory of samsung (trademark) with G.SKILL ones, the computer cannot start with black screen. When I've switched back to factory memory, the computer is back to normal.

  That means G.SKILL RIPJAWS V 16 GB memoryis is not compatible with this HP computer motherboard? or upgrade the BIOS can solve this problem? or do I return these memory and get 8 GB * 2 instead? Your comments are much appreciated.

  This model is limited to only 4 GB and 8 GB modules in the slot.

  B21 HP

  CL15 - DIMMs, 4 GB, PC4-17000, 798033-001, DDR4 COMPLY_2.07

  CL15 memory - DIMM, 8 GB, PC4-17000, 798034-001, DDR4 COMPLY_2.07

  You can buy online modules of 8GB.  Look at the technical on this point.

  https://www.CDW.com/shop/products/Kingston-DDR4-8-GB-DIMM-288-pin/3912220.aspx#Po

• HP ENVY 17-3011er: installation of more than 8 GB of memory

  Hello.

  It's in the Manual:

  "Supports up to 16384-GB of RAM @ 1333 MHz, supports up to 8192 GB RAM @ 1600 MHz"

  So you can install 16 concerts but the system will downclock it at 1333 mhz. unless you're doing very specific heavy dependent memory computer like video editing or compilation of heavy Code that I would stick with 8 GB running at 1600. Curiously, installation 16 concerts could actually slow down the computer a little if you do not actually more than 8 GB, which most people are not.

  Your manual

  See page 2.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• M7-j020dx Touch Smart 17 envy: left hinge problem m7-j020dx want.

  When I open the laptop now, the left back of the low box (below the left hinge) breaks down as the screen is high in a viewing position. I have to press the back of the left side of the bottom of the case and the top of the case to get the left rear of the closed box. When I drop the screen, the left rear of the case is falling apart and stay outside until the screen is closed. I am able to close the left rear of the case by pressing the up and down of the left rear of the case together. The right hinge and the back of the right side of the case do not have this problem. This problem started today. I have pictures smartphone that I can send if necessary. The notebook and the screen is operational. Just do not know what is happening with the left hinge to force the case apart on the back left side of the front panel.

  Hi @ BigBud350,

  Thank you for the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  A problem with the hinges. Is this fair?

  Thank you for sharing the details of the problem. I want to help you.

  This forum is limited to software support only. I recommend that you reach phone support for any replacement of component using the link below.

  http://HP.care/2bjG4nE

  I hope this helps. Please update the State.

  Happy announcement.

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

• ENVY 700-515xt: RAID 1 support WANT 700-515xt Office

  Envy my new 700-515xt (product # K7X03AV), MSI Kaili2 motherboard, Chipset Intel Z97/Z87, operating system Windows 7 RAID 1 support and if so what should I do to set it up.

  Hello

  1. This publication articlewill give you some information note in order to read at least twice.
  2. Make a complete disk image system hard by as a precaution.
  3. All data on the target drive will be more written to return it to the top before you continue.
  4. Install theIntel RAID rapid storage technology driver (TSRI).
  5. Go into MSCONFIG and set the boot in safe mode and save the changes.
  6. Turn off and restart your PC in BIOS menu (key to tap the ESC after plugging).
  7. Select F10 for BIOS configuration and then go to storage--> Storage Options Menu and change the emulation of SATA RAID.  Save the changes and start safe mode.
  8. If OK at this stage then return to MSCONFIG---> Boot and uncheck safe startup, save changes and restart.
  9. If OK at this stage then your PC is ready to configure RAID.
  10. Go to control panel, and then select TSRI.
  11. Go to the help screens and examine how to set up a RAID 1 volume.

• HP ENVY PHOENIX 800-060: transfer windows want to 800 motherboard again - 060

  Hello

  I bought this new computer there is a little more than two years and now I tells me that the motherboard and power supply have out crapped on me. We could think of a motherboard should last longer than that, but I digress...

  I would replace the motherboard so that I can save the rest of the computer. Is it possible to transfer my license windows from the old motherboard to the new? Or I have to buy another license?

  Thank you

  Greetings,

  I hope that you back up the important things on several external media and in the cloud until it happened.

  The failure of food fry the HDD/SSD or any other component?

  You can contact HP to service here.

  HP will replace the motherboard and the MB of tattoo. This would allow you to use HP recovery media to bring the system to a factory State. You wouldn't need a new Windows product key.

  Do you make or buy HP recovery discs before this catastrophic event? It appears your PC comes with Win 8.0. Recovery media, you can order here.

  HP will reinstall Win 8.0 if you replace the defective components and tie the mother of replacement HP factory for the chassis number of the system (tattoo).

  If you replace the motherboard on your own, you can buy a new Windows product key.

  See you soon

• ENVY of HP TouchSmart laptop 17: want to upgrade processor for hp touchsmart 17-j017cl

  I have a ((TouchSmart de HP ENVY 17-j017cl Notebook PC (ENERGY STAR)) with ((2,5 GHz 4e génération de processeur Intel Core i5-4200 M avec Turbo Boost jusqu'à 3,1 GHz)) I want to upgrade my processor (Intel Core i7).-can someone help me and tell me what type of core i7 and (my processor baisc) compatible with my computer (BIOS) explain to me.)
  Thank you.

  Hello

  http://h10032.www1.HP.com/CTG/manual/c03922401

  ●Intel® Quad Core™ i7-4900MQ 2.80 GHz (turbo SC up to 3.80 GHz) processor (FSB 1600 MHz, 8.0 MB cache L3, 47 W)

  ● CPU Intel Quad Core i7-4800MQ 2.70 GHz (turbo SC up 3.70 GHz) processor (FSB 1600 MHz, 6: 0 - MB cache L3, 47 W)

  ● CPU Intel Quad Core i7-4702MQ 2.20 GHz (turbo SC up to 3.20 GHz) processor (FSB 1600 MHz, 6: 0 - MB cache L3, 37 W)

  ● CPU Intel Quad Core i7-4700MQ 2.40 GHz (turbo SC up to 3.40 GHz) processor (FSB 1600 MHz, 6: 0 - MB cache L3, 47 W)

• HP Envy 700-200z: video card for want 700-200z

  Hello, I want to add a video card to my desktop 700-200z envy, which came with a single integrated graphics card. This is for video editing, and I just need a card modestly price such as the NVIDIA GeForce GT720, as long as it has open CL or CUDA. The GT720 will work with my motherboard? Thank you.

  Hi George,.

  The NVIDIA 720 is a video card very low end.  You might be better to use the NVIDIA GT 730 for $79.

  Review of the HP articles below.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

• HP Envy 750-120: bi-ecrans on want 750-120... HOW... Help, please...

  Just bought the HP ENVY 750-120 office... also bought 2 new monitors (HP Pavilion 27xw 27 - in LED Backlit Monitor IPS)... cannot get the computer to recognize 1 monitors...

  Curiously, the Office has 1 hdmi and 1 connection on the video card dvi... but both monitors only came with vga connectors (Thanks much HP)... I bought 2 new hdmi cables for monitors but that you can only use 1 of them in the region of the video card... There are 2 connectors extra hdmi on the back of the computer but still using those in all combinations with reboot and detection under settings display does not cause the computer to detect the 2nd monitor...

  I think my only other option is to hang the 2nd monitor to the dvi on the video card slot, but I'll have to find a converter because the monitor is only hdmi and vga... does what his right?

  I'm not computer expert, please excuse my questions of common sense... why the video card is not 2 hdmi connectors and why HP is hdmi and vga monitors but then make their computers with only 1 connection hdmi and dvi... also, why doesn't the computer recognize the 2nd monitor so I use one of the HDMI slots at the bottom of the computer... What are these slots hdmi because then...?  really annoying that HP does not sytems super easy to hook up to the secular...

  Thank you for your suggestions...

  -bear

  I solved the problem of dual monitor.  The computer came with only 1 hdmi connector and 1 connector on the video card.  Monitors have vga connectors and hdmi... a monitor worked with hdmi to hdmi slot, and I ran to the local big-box store and bought a hdmi to DVI and hooked up to the video card... immediately my 2nd monitor came.

  Problem solved,

• HP ENVY 7640: wireless radio does not want 7640

  Buy this printer recently worked for about 20 minutes.  The printer says THE WIRELESS RADIO NOT FUNCTIONING.  Advice or should she be returned.

  Hi @HAYHEATH,

  Thank you for visiting the Forums from the HP Support! I see that you have found a "Wireless Radio does not" error message on your new HP Envy 7640.

  Contact our technical support HP 800-474-6836 because this can be a hardware problem. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

• HP ENVY 4502: New out of box want 4502 says 'the following ink cartridges need to be replaced.

  I bought a new HP ENVY 4502. I have out of the box, follow the installation instructions precisel before 4.9 step. The printer says 'Cartridge Install' with a blue under circle. I can't go any further.

  I turn the machine off and on again and everything looks OK and I can continue with the installation.

  Is this normal or does indicate that there is a problem with the new printer or cartridges provided?

  Thank you for your help; I look forward to a response

  Hi @johngray,

  Welcome to the Forums of HP Support! I'd love to help you with your newly purchased 4502 envy. From your description, it seems that you have seen the 'Installation cartridge' message with a blue circle and could not move forward through the installation until you turned the printer off and on again. Your message, it sounds like once you have turned off the printer and turn it on again you were able to complete the installation, is that correct? I think that maybe there was a minor hiccup and the printer does not detect that the cartridge was installed, I don't think that it is an indication of how the printer will behave in the future.

  If you encounter any other complications please let me know and I will gladly make all that I can to help.

  If it meets your needs, please consider tagging this post as solved by clicking on accepted as a Solution below to identify your problem as solved! Thank you.

• Envy 5640: Alternate Win7 driver for want 5640

  I work for a bank that lock our PC (Win7) very strongly so I can't load the drivers for my new printer Envy 5640

  The guys from support to add a nonstandard driver (in their mind!) is a nightmare

  Does anyone know other pilots (who would have Win7) I could use - without a doubt for printing and, ideally, for scanning

  Thanks a lot for any help you can give this

  Jonathan

  In fact I've not sorted myself

  For anyone else wondering so the best answer seems to be to use Deskjet 6980

  seems to work

• HP Envy 5660: Need to restart 5660 want to copy after printing

  I can't make a copy after using the printer unless I have disable the printer/scanner/copier and then turn it back on.
  After prints from my PC, when I press the "Copy" button, the device emits a sound like the head of the scanner is copying, but all what happens is a blank page gets kicked out and cancelled 'impression' message appears and remains on until what I turn the power off.

  Hello

  Please follow the steps to solve the problem:

  http://support.HP.com/us-en/product/HP-envy-5660-e-all-in-one-printer-series/6809225/model/6809226/document/c02205477/

• HP Envy 5530: BONES of Yosemite and want 5530

  I've updated my Mac Air in YOSEMITE, now the printer is not connected. I deleted the connection to reconnect, and now my Mac can't find the dang wireless printer!  Can anyone help?

  Hello

  Please follow the instructions below to fix:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/Mac-OS-10-10-Yosemite-and-HP-printer-support/TD-p/4620166

  Good luck.

• HP ENVY m6-1104se Notebook PC: Please help I want this driver on Windows 7-64 bit

  Hello
  I want to help this AMD 7670 M 2 GB driver
  I can't find the driver for windows 7-64 bit
  Portable model...
  HP ENVY m6-1104se Notebook PC
  I want to get on this driver for Windows 7-64 bit
  Please help I want this driver on Windows 7-64 bit

  Hello:

  You need the graphics driver, and it will also install the graphics card intel too.

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp56948.exe