Envy of 4-1152er, PN: COU74EA #ACB: replace want 4 HDD to SSD

Similar Questions

• Portege R500 - PPR50E replacement of the HDD or SSD

  Hello

  The hard drive in my beloved Portege R500 is dead.

  The model is a Toshiba MK1237GSX and am looking for a compatible hard drive to replace it with conclusion that this exact model turns out to be difficult. You can also and my first choice would be to replace the HDD with a ssd drive - is this possible and any recommendation on model?

  Any help is very appreciated

  Thanks in advance

  Agree with Akuma.
  You need an SSD that supports the SATA interface.
  You need disc SSD SATA 2.5

• Replacement X 220 HDD with SSD?

  Hi people,

  1 can you replace the built in hard drive on a X 220 with a SSD?

  2. If possible, where can I find instructions on how to do it?

  3. If possible, should be a tiny philips screwdriver - where can we got such a tool?

  TIA,

  SD

  1 Yes
  2 x 220 guide on the Lenovo site. No problem to install the new 7 mm or 9 mm ssd
  3. Yes, you will need a small scredriver

  I replaced the standard hard drive with ssd Intel 320 Series. The only thing you will need is tool of s/w for transfer system and the date on the new SSD. Another tool is to tweak Windows for the use of SSDS. Nothing tool you will need to charge Windows 7 install direct on the ssd.

• HP ENVY 15 J122TX TS: replace the HDD with SSD

  Hello world

  I'm new here, I bought a HP ENVY 15 TS, there an mSata 24GO and I was wondering if I could install a larger mSata to run the o/s. If this is not the case, replace with a new SSD HARD drive? If so, what is the optimum capacity should I install? My characteristics are, Core i7-4700MQ, 8 x 2 GB RAM, 1 TB of HARD drive.

  Awaitng a solution.

  Thank you

  SENAL

  Here is the Service Manual of the 15 WANTED TS J122TX:

  Manual

  See pages 43 to 48 for more information on the removal and replacement of hard drives, including the WSSD. Your laptop Fortunately for you access to these components. The reader of the WSSD cannot be done in bootable without changes of very high-level software that I will assume that you do not want to try. Even with those that you are technically not the start of the WSSD to redirect to start Windows boot from the primary drive and finish by the WSSD. So basically if you want to run an SSD, penetrates a 500 GB Samsung 850 Evo SSD and remove the MSSD. We then have to reinstall the software on the SSD drive. With an SSD as drive so it is more a reason for the accelerator of the WSSD, but on your model of operating system installation still requires a bit of trickery that storage controller is on RAID and you need to load a driver during installation. After if you want to proceed with this I can be sure that you are interested in before getting into the details.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Envy 17 3D primary HDD to SSD update

  I was wondering the steps I need to take in order to upgrade my current 640GO 7200 HARD for one SSD drive. I read this thread on compatibility, so I'm aware of some issues, I might.
  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/envy-17-SSD-compatibility/TD-p/1251555

  I have a 3D Envy 17, I bought around this time last year so its probably an Envy 17-1000 - series 17-1099.  It came with w7 home preinstalled on a 640GO HDD 7200.  I want to put a SSD in the main location and use the 640 current in the secondary location.  I caddy HARD drive for secondary housing already I just need to know what are the steps I have to take for the SSD installs successfully.

  Here are some questions I have:

  1. I know that envy is sata2 but most SSDS are sata3, sata3 SSD would be compatible with my desire?
  2. Use you the backup disc made from the 640 GB HARD drive and install it on the SSD or I'd get a new copy of w7 to install?
  3. If using a new copy of w7 pro would be the system, the video card drivers and 3d pose a problem since it is is not version of w7 HP?
  4. When the SSD is finally installed I can just pop my 640 in the secondary drive slot and pull the personal folders, and then format it or I don't get the personal files of beforhand?

  Hello

  Q1: Yes it is compatible.

  Q2: I suggest to create a reduced recovery dvd in the HP Recovery Manager. Solid discs are not as large as the original hard drive and it can lead to problems during the restoration of the system on an ssd.

  Q3: An OEM of Windows disk can be used to perform a new installation and download the necessary drivers from HP.

  Q4: Yes, just install the hard drive in the Bay secondary and working as a slave drive so save all the data you need and then reformat...

• want to 24-n250ur: SSD m.2 Bulldozer - 4GL Envy 24

  I'm a 24-n250ur on matherboard Bukdozwe-4GL. What type of m2 is it? PCI-E or SATA? I want to buy a SSD drive Samsung 850 evo. Will it work? I've never been able to find an answer.

  Hi K0stya2007,

  While our PC is different, both use the same motherboard of Bulldozer-4GL.

  Here is the link of product to your craving 24-n250ur.
  http://support.HP.com/us-en/product/HP-envy-24-N200-all-in-one-desktop-PC-series-(touch) / 11084176/model/12262058/document/c05247751 /.

  Here is the link of my 27-p041 Evny product.
  http://support.HP.com/in-en/document/c04869827

  The 128 GB SATA III SSD M.2, tried at the beginning did not work. He was never taken over by the BIOS or in the operating system. However, when I tried the Samsung 950 PRO NVMe M.2 256 GB it was immediately recognized by BIOS and Windows 10 drive. Here is the link to the ssd which worked in my PC.  I pulled my other system to test.
  http://www.Samsung.com/us/computing/memory-storage/solid-state-drives/SSD-950-Pro-nVMe-256gb-MZ-v5p256bw/#specs

  I was surprised that the motherboard supports PCIe is that I wasn't expecting that pleasntly.  Now I'm not saying that it will work with your PC, but I would definitely give it a try (especially if you can return the drive, if it is not). Make sure m2 slots are enabled in the BIOS, otherwise it won't work.

  HP could have saved us a lot of headaches if he said simply that the m2 slot is PCIe somewhere in the documentation instead of simply "a slot m2 for SSD" and we have to guess.  In any case, I'm just glad that it works for me.

  Let us know how it turns out for you.  Good luck!

  

  

  

  

  

• HP Pavilion 14-AL022TU: can I replace HP Pavilion 14-AL022TU HDD with SSD?

  I have two questions:

  I want to buy HP Pavilion 14-AL022TU of HPSHOPPING. IN and need for clarification on the sub questions: -.

  1 can replace HDD with SSD? What is the back panel opening?

  2. is there the free Slots of RAM available? While I can improve in the future?

  3 there DVD player?

  4. What is the exact weight of this laptop?

  Here is the Service Manual:

  Manual

  Plug

  Weight

• I replaced my netbook with a SSD HD and reinstalled Windows Starter with original OEM key. Now, he had become an evaluation version. How can I fix it.

  I replaced the HD with an SSD in my netbook.

  Due to the change of material (disk) I couldn't use recovery option.

  So, I reinstalled Windows Starter from scratch with the original OEM key (on the back of the Samsung netbook...

  After a delay of a licency says Windows is not is no longer valid (end on assessment) and I have to buy a new version.

  I've already paid for this edition of starter, so I don't want to buy any update.

  Samsung CAL not does not help me, because the licensecode is Microsoft.

  How can I fix it?

  How can I reactivatie this Starter Edition is assembled of original Key?

  have you enabled it? Probably the initial 30-day grace period expired.

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your problem clearly to the support person.

  If this does not work:

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once downloaded, run the tool.

  Click on the button continue, after a short time, continue button will change to a copy button.

  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

  Please indicate the version and edition of windows from your COA. do not specify the product key.

• HP ENVY notebook - m7-n101dx: graphics card in replacement for laptop HP ENVY - m7-n101dx

  I have a

  HP ENVY notebook - m7-n101dx

  my graphics card appears to not follow very well on demanding games and I wouldn't mind buying a new card.

  I'm relatively unknowledgable on the compatabilities of these cards and how they work, but I want to know if its possible to replace the card for a more powerful version.

  Hello

  Unfortunately, you can not. Except for the preinstalled class and some gaming machines, we cannot upgrade graphics card on a normal laptop.

  Kind regards.

• Envy 15 BEATS 3040NR audio dial/button replacement

  I got this laptop from a friend for free, it is out of warranty and I had the problem of button sticking audio BEATS feared the second time I tried to turn on the laptop. It seems quite common problem and I basically disconnected the button/wheel of the motherboard, but now does work ' t sound. So either I replace with a basic resistance or replace the button or live without the sound.    Everyone there is cavalier it with resistance so that sound works or has someone paid for a button in replacement of HP, if so, how much is?  I guess I can control the sound via the software so I could no less care on the dial. And I can't turn the sound enabled/disabled via the software as well. I'm not a gamer, so the only thing I really want to use the sound is for pandora, music, MP3s, etc...

  Jay

  http://h30434.www3.HP.com/T5/notebook-hardware/HP-envy-15-3012tx-beats-volume-dial-button-gets-stuck/m-p/1920881

  OK, managed to fix the stuck button then I plugged the ribbon cable in my motherboard and it seems to be good. The dial still works to control the volume, but I dare not ever push this button again. I presume that it must toggle something related to audio. (I haven't watched what he does (another completely screw up the phone when he's stuck!).

  I followed the instructions above to remove the three screws philip head and uses a very small allen key to force the switch to be stuck.  No amount of banging or dismiss or even the lubricant of bicycle chain should take off the top for me button.

  Jay

• HP Envy 15-j002ex: low resolution after I replaced my laptop screen

  Hello

  the screen of my laptop has been malfuncation, so I had to replace it, I went to a service provider local hp official in Saudi Arabia, madinah.

  they replaced my screen, but after they did I make a lower resolution, then I had.

  I used to have a maximum resolution of 1920 x 1080, now I have the maximum is 1366 x 768

  I went back to the store and they said that everything is fine with the screen and the screen even settle without difference and they almost called me a liar.

  im going back to them with the mobile care http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03987278

  and my broth has the same laptop with the higher resoultion ill show them

  What im application, it's that you think could cause this problem? power cord screen placed in a wrong place?

  and thank you

  Hi @TeeShirtArtist,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY 15 - j002ex Notebook and questions with a new HD BrightView LED backlit (1920 x 1080) display panel with the lower resolution. I will try to update the graphics drivers.

  Click the arrow next to display adapters to expand this category
  Right click on graphic family and select Update driver software
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver
  Once the installation is complete, restart your laptop.

  If that doesn't help, here is a link to change the resolution, you may need to select the Advanced setting to ensure that your driver is used.

  I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings.

  A computer repair center should be able to fix this without any problem. The only thing might be if they have installed a bad Panel. The only way to know what are the Panel specifications, would be to get the part number of the new group.

  I hope that it helps anything here.

  Thank you.

• HP Envy 14 A9P67UA spectrum #ABA: Add (or replace) mSATA SSD to the HP Envy 14 spectrum w/windows 10... possible? Worth the risk?

  Hi all!

  So, I read in this forum on this subject and have seen mixed results.  I bought this computer a few years ago, generally pretty happy with it but I ran out of space and the battery is dying.  I am trying to decide whether to revise it or buy new.   That's what I want to do:

  Add 2nd mSATA SSD in the second slot.  I saw a post like this HD is compatible but that's a post.  Around, I've read that others have had problems by adding a second SSD.  Some people can not access, some people, it shows only a 128 GB extra, in fact, some have a BSOD.   The post I saw replaced the original disc to help one of them and adding a second drive so the two HDs were of the same brand.  Is it a better idea?  Also, all the posts I've seen on this topic were two years old and dealt with Windows 7.  Windows 10 it will make it harder to do?

  http://www.Amazon.com/Samsung-850-mSATA-2-inch-MZ-M5E1T0BW/DP/B00TGIVRYU?ie=UTF8&PSC=1&redirect=true...

  If not I can try and use the same car with the model came in the second slot to help in possible compatibility issues, but I would be limited to a 128 GB extra (or possibly 256?).

  I have also upgraded the memory of 8 GB and add a new battery.

  http://www.Newegg.com/product/product.aspx?item=N82E16820220618&ignorebbr=1

  Reflections on what is successful? I wouldn't waste money on these parts if this is going to work.  Thank you!

  Chris

  Hi @cdmdds,

  Welcome to the HP Forums!

  I understand from your posts that you are having a problem with your Notebook SPECTRUM HP ENVY 14 - 3010NR and needing some updates. This system supports 8 GB (8192 × 1) of the maximum of memory RAM and 256 GB (128 GB × 2) Page 34 of the repair. The battery information on page 32.

  This would be due to the limit with the processor.

  Please let me know if this information helps you solve the problem by marking this post as accept as Solution, this will help others easily find the information they seek.

  Thank you.

• HP Envy 15-q178ca mobile: bad Windows disk replaced

  I sent my Hp laptop due to a hard drive problem.  My disc contained 10 to win.  They replaced the disc as my laptop is still in warranty.   For some reason I do not understand what they delivered my laptop back to me with Win 8 in there instead of my Win 10.  I get the race of people on the lines of support (from other countries); You should hear some of their solutions, i.e. replace the chip on the MB and other stupid answers.

  I'm trying to recover my Win 10, surely, HP must be able to provide me with a link, but I guess that it is beyond their comprehension.

  Sorry for sounding so hard, but at the age of 80, I don't have a lot of patience left.

  Maglite

  Hello

  As mentioned on my last response, HP can reset only your machine to its original windows because HP is not owner of Microsoft products.

  Thank you for we do know that Microsoft has given you a free upgrade because they stopped it a few days ago.

  My last point: I don't know why they (from HP Support) asked you to change the chip on the MB.

  Have a good weekend.

  Kind regards.

• HP ENVY 17-j067ez: Nvidia gt 740 m replacement

  Is it possible to replace the nvidia gt 740 m with another graphics card?

  The only laptop that HP ever made with a removable graphics card was the HDX Dragon (to my knowledge)

  Your card is soldered on the motherboard and cannot be upgraded. I'm sorry.

  I have a laptop Dell Alienware with a card which is not soldered to the motherboard and I checked in an upgrade.

  He is now running 2 860 m so up to that are the 980.

  Even if I wanted to, cards for the latter are very difficult to find on their own, and they are so expensive, it would be better to just buy a new machine.

  If you're gaming or run an application that requires more video power, a counter top is the way to go.

• 6 1012sd hinge envy / back cover - what parts of screen replacement?

  Hello!

  My HP envy 6 portable 1012sd, I have for half a year now, has a broken left hinge. I saw on the forum that it is a known problem, unfortunately I left my pass laptop out of my hands so I kind of did myself (although it was a weak point that broke).

  Because it is not under warranty, I have to fix it myself. I found the interview guide (pdf document named c03282148) and opening my laptop I saw that the hinge itself is not broken, but a small piece of plastic of the back cover (of the screen) is broken.

  If I want to order a new back cover view. However: there are different maintanance guide three who all the discription "Rear cover" in spare part numbers: 686590-001, 692382-001, and 694471-001. How can I find out what part fits on my computer?

  I hope someone can help me!

  Thank you!

  JHKaan

  I'm a link to the contact page of parts store HP below that I can't answer your question precisely because I do not have access to the matrix of HP parts. If you communicate with people at the HP parts store they can answer your questions with true and accurate information to ensure that you get the right part.

  http://PartSurfer.HP.com/contactus.aspx

  The problem is that there are different variations of your laptop as it has been sold in various parts of the world.

  If you have any questions or concerns, feel free to re-post.