Microsoft 6to4 adapt #38 works do not (code 31). What is a not-very-savy computer grandfather to remedy?

Similar Questions

• Microsoft 6to4 adapt #5 problem

  I had a Compaq Presario using Windows Vista Home Premium for about four years. All of a sudden, I'm having a problem with my two printers - an HP LaserJet 4000 spits out blank pages and the 932C HPDeskJet prints very slowly. Diagnostics of material that came with the computer tells me I have a problem with Microsoft 6to4 adapt #5 and give me a "code 31".  I ran Microsoft Fix - it and he has successfully performed two operations, but the problem persists. the only difference is that my diagnosis is no longer gives me an alert to the problem and I can't have the exact language of the problem.

  I have used the system restore and restored my system to an earlier date to an automatic update of a device driver package, but it does not solve the problem, although the printers worked fine on the date to which the computer has been restored.

  What should I do now.

  Thank you.

  Hello

  These driver issues should not be a part of the print issue.

  As OEM HP is responsible for the good operation of the printer and their drivers.
  Check with HP Support, their drivers and documentation online and ask in their forums.
  on known issues with these printers.

  Good luck, you need to update or reinstall the latest driver.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  =============================================================
  =============================================================

  It "may" be something that interferes with the operation of the printer if after running
  updating test pilots a Clean Boot to see if that helps:

  Use the startup clean and other methods to try to determine the cause of and eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  above is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Aero is not working is not in my computer running windows 7 Professional

  Aero is not working is not in my computer running windows 7 Professional. My computer config is Intel pentium 4, 1 GB ram, 120 GB HDD, no graphics card, mercury mother board (PI865D7) and my display driver software only works for XP. I used Vista previously, the aero effects worked perfectly in that.

  When you ran the Windows 7 Upgrade Advisor before upgrading to Vista, not it said you you had a potential problem with your graphics card?

  Your mercury PI865D7 mobo uses the Northbridge Intel 865GV chip / 865G for graphics.  According to Intel, no Windows 7 driver available for this graphics controller.

• I have problems with Microsoft 6to4 adapt reports tv_configmgrerr31 and also microsoft PS/2 mouse bring tv _ configmgrerr24

  Workin

  Symptom:	Device is not working properly. Windows cannot load the required device drivers.
  Cause:	A device has a configuration issue preventing it from working correctly.
  Details:	The device, the Microsoft 6to4 map, reports "tv_ConfigMgrErr31". This device won't be available until the problem is resolved. The Plug and Play ID for this device is ROOT\ * 6TO4MP\0004.
  Resolution:	1. check that the correct driver is installed.
  2. try updating the drivers using Windows Update.
  3. check with the manufacturer for an updated driver.
  4. try to uninstall and reinstall the device using Device Manager.
  Partners:	Explanation of generated by Device Manager Error Codes
  Manage devices in Windows
  Symptom:	Device is not present, not working not properly, or does not all its drivers installed.
  Cause:	A device has a configuration issue preventing it from working correctly.
  Details:	The device, Microsoft PS/2 mouse, reports "tv_ConfigMgrErr24". This device won't be available until the problem is resolved. The Plug and Play ID for this device is ACPI\PNP0F03\4-14DDEF44-0.
  Resolution:	1. check that the correct driver is installed.
  2. try updating the drivers using Windows Update.
  3. check with the manufacturer for an updated driver.
  4. try to uninstall and reinstall the device using Device Manager.
  Partners:	Explanation of generated by Device Manager Error Codes
  Manage devices in Windows

  Hello

  This error may occur if one or more of the following conditions are met:

  (a) there is a hardware problem or a new driver might be needed.

  (b) devices remain in this State if they have been prepared for removal. After you remove the device, this error disappears.

  Step 1: If the device does not work, make sure that the device is properly connected to your computer. For example, make sure that all cables are correctly installed, or that the cards are properly housed in their locations.

  Step 2: Run the following Microsoft Fix it.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Microsoft LifeCam suddenly stopped working, has error Code 43

  I have been using an external camera from Microsoft "Microsoft LifeCam" on my Toshiba 305 and suddenly it has stopped working & and/or is therefore most recognizable when it is plugged.  Any suggestions on how to put it on again.  The camera that came with this Toshiba 305 is very grainy and looks like maybe the goal was scratched and does not have a good video image and the external camera did a great job for me with this laptop.

  One of the "warnings" or troubleshooting of the menus said the following:

  Intel (R) 82801 G (ICH7 Family) USB2 Enhanced Host Controller

  Windows has stopped this device because of problems (Code 43)

  Help!  and thank you Bill in Chicago!

  Hello Bill,

  Thanks for posting your question on the Microsoft Community forum.

  I apologize for the inconvenience caused to you.

  I understand that you have a problem with Microsoft life camera stopped working in the system and get the error 43.

  This issue would have occurred because drivers have been corrupted in the system.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Error codes in Windows, Device Manager please follow the steps in the link provided and check if it helps.

  http://support.Microsoft.com/kb/310123

  If the problem persists, please follow method 2.

  Method 2:

  Code 43: Windows has stopped this device because it has reported problems, please follow the steps in the link provided below.

  http://TechNet.Microsoft.com/en-us/library/cc725873 (v = WS.10) .aspx

  If the problem persists, follow method 3.

  Method 3:

  Troubleshooting for the failures to find the new LifeCam hardware, please follow the steps in the link provided below and check if it helps.

  http://support.Microsoft.com/kb/929087

  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  For reference:

  Please refer to the procedure described in the article below.

  Troubleshooting: Webcams

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

  Thank you.

• How to install the Microsoft Isatap, Teredo Tunneling adapter Microsoft, 6to4 adapt card

  Can you explain me please, how can I solve tis problem. I don, t know where I can find this adapters, because they are not installed on my computer.

  The computer asks me to solve this problem.

  Is there a link on the internet for download? Or another solution? What is the need for this card?

  And problems wirh apparaten PnP, how do I solve this problem?

  Thanks a lot for your help

  Hello

  Don't you worry about this unless you have found errors. If so see these threads.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/754c8f29-3a87-4E77-Babd-a69c8910e17e

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/05a8849e-89c1-4CC9-8004-f6d07a4fdf8b

  http://www.cableforum.co.UK/Board/34932105-post6.html

  ====================================

  A new Microsoft 6to4 map is created unexpectedly after restarting Windows 7 or Windows
  Server 2008 R2
  http://support.Microsoft.com/kb/980486

  How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7
  and Windows Server 2008
  http://support.Microsoft.com/kb/929852/en-us

  Response of Lionel Chen
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps.

• My USB device for Microsoft 6to4 adapter keep a malfunction?

  My USB device to map Microsoft 6to4 PLZ HELP keep malfunction!

  Hello

  1 did you change on your computer before this problem occurred?

  2 are. what device you referring?

  3. did you receive an error message?

  Method 1: Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2: View the status of a device by using Device Manager

  The device status indicates if the device has installed the drivers, and if Windows is able to communicate with the device.

  To check the status of a device by using Device Manager

  1. Open Device Manager.

  2. double-click on the type of device that you want to display.

  3 right-click the device that you want, and then click Properties.

  4. on the general tab, the device status box displays a description of the current situation.

  Method 3: Update the device from Device Manager driver.

  1 right click on the icon my computer

  2. Select manage from the menu.

  3. Select Device Manager in system tools that are listed in the resulting display.

  4. right click on the device.

  5. click on the driver tab.

  6. click on set to update driver.

  7. at this point, simply walk through whatever other instructions you are given on the screen. This part of the driver update process can be different depending on the type of material that you update the drivers for.

  8. once the update of Windows Vista driver is finished, you may be prompted to restart your computer

• Problem with the touchpad doesn't work is not on the computer.

  Today, I was on YouTube, listen to music, when I turned the volume up to full. My laptop (ASUS) is a VERY high - pitched shrill sound that would not stop until I turned the laptop on sleep. When I turned on the laptop back, the screeching stopped but my Touch Pad stopped working. Fortunately, I have a USB mouse which I use now. I tried following the instructions to activate the keypad, but it does not work. I restarted my computer, and that did nothing.

  Help would be GREATLY appreciated.

  (also, I had problems with this laptop in the past, involving having to solve every time turned to have internet access, but a day that goes by and now the internet accessibility works very well.)

  Hi Lucie,.

  Thanks for posting your query in Microsoft Community Forum.

  What is brand and model your computer?

  Problems with the touchpad can occur due to a number of causes, including cables that are not connected properly, lack of updates, corrupt or drivers incompatible or because of hardware problems. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Try to run the suite of equipment fixit and see if the problem still occurs.

  Hardware devices do not work or are not detected in Windows

  Method 2:

  See the additional steps provided in the following article.

  Mouse, touchpad and keyboard with Windows problems

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Microsoft 6to4 adapt #3, Windows cannot load the drivers required deivce. (Code 31)

  No, it's just done so it was updated.

  For 6to4 adapters:

  Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you want and
  on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message.
  http://support.Microsoft.com/kb/932520

  Check the answer by Diana D. here:
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/a75e8bf1-9a63-4CF4-BF6C-d43a26175959

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I tried to reinstall microsoft 6to4 adapter #2 and need me addition inherited material steps, but it will not reinstall

  and need me addition inherited material steps, but it will not reinstall why it shows up.

  Its a hidden device. According to Device Manager menu click on "see the hidden devices. It should show up under network adapters.

• Microsoft mobile mouse 3000 works do not correctly under Vista

  I have a mouse Microsoft 3000, which is less than 3 months old. I replaced the battery. I used the reset button. However, the mouse will not turn on gree. indicating that the mouse works. I saw this question already on the Microsoft answers site. ILO is unable to find the solution. Can you help me?

  Hi Instructor4216,

  I recommend you to try the steps in the articles below. You can exclude what you have already tried.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122

  If the problem persists, you get your mouse replaced.

  http://support.Microsoft.com/kb/326246/

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• adapter Xbox works is not in India? damaged

  I am in India and on the connection of the 110-127 V through an Indian converter adapter (220V 100V converter voltage in India is 220V) the heated converter and the Xbox has not started. This xbox was bought for me by my brother in November 2012 in US and translated in India recently. What is now the solution. Help, please...

  It is possible that your Xbox is fine and that your transformer (converter) is just defective. However, the transformer may have been defective and caused considerable damage to your Xbox.

  It is normal for the transformers get warm (but not hot/smoking) during normal use, which in itself should not be taken as a sign that its defective. It can simply not provide what the Xbox needs.

  Whether you have your hardware need professionally looked into the case otherwise you may cause further damage your Xbox or the risk of fire. A transformer overheating caused my ZX Spectrum to burn in the 1980s (a sad day).

• Service blocking Microsoft e-mail account works do not question

  Hi, I have a lot of email spam to come and I have connected to my email account and went into 'settings', then 'options' and block e-mail address. OK, after that add the senders of spam to email addresses email of spam continues to make its way to my email inbox. I copy and paste the address of spam of so I know that I do not write them down badly. Can I do to make the block sender work? One is * address email is removed from the privacy * that is persistent and I repeated the process to add the spam address to the block sender. But it won't accept it because I have already added this email address.

  You gave me such a clear path for 'manage' I could fix his account and make some corrections on mine also.  Thanks a lot for this one right answer and this quick response!

• I have a problem with the Microsoft Programs work is not on the computer.

  Original title: programs MS 'arrested '.

  I was cold called by a company, (Smart snake) who told me that my pc has returned error reports and they can fix it, but they have to take control of my PC to do.  They forced me to put in "config" at the C prompt to show me how many MS programs have been arrested.  Anyone know if it is likley to be authentic and if so, what is the best course of action to make about the programs of the MS order

  Its all in the name; Snake - powder of snake oil

• Problem with audio works is not on the computer.

  My audio does not work on my machine.  Do not know why. It worked on my machine for several years and suddenly left on its own.
  Will not work in chrome or IE.  I had came to try to resolve this where I work and man can't seem to make it work. Have windows 7.

  Thank you

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)