EOS 5 d Mark II issues

I rarely use the camera more since my kids are grown, however, when I turned on and look into the camera I get only a round field of view instead of the whole framework. I removed the lens and saw that there was a bar through the opening which I pushed slightly upward.

Before that I put together this little bar, he left a line in the image.

Now the camera takes a great picture, but the view is not normal. I changed lenses and get always the same small circle in the Viewer.

Any help would be greatly appreciated.

"little bar"?

Inside the 5 d II, normally you will see the reflex mirror that it is 'down' position.  Above the reflex mirror is the development of the screen (in the roof of the House of the mirror) there is essentially a (framework) tray that holds the the development of the screen, but it is articulated at the rear so that it can get access during the exchange of the screens.

Here is a picture of the inside of my 5 d II

You can see the reflex mirror down, but you can see the focusing on the top screen.  There is no 'bar' in itself, but that the focusing screen is kept in place by the tray hinge-mounted.  Pulling on the leg (upper center) would release it and allow it to swing down (even though the screen might stick to the roof).

If this managed to get loose and swing down, then it is possible your frosted glass is not well versed.

Before continuing, please watch this video:

http://www.YouTube.com/watch?v=szFOsQ4pGWo

Normally, the Canon doesn't want your fingers for this screen - this is why they provide a special tool for use when changing the touch screen (they sell optional screens for your camera and you can exchange these yourself.)  You must be careful espeially here you don't have their tool.

My guess is that your screen is not properly seated and, for this reason, the distance targeted to this screen (you may think what frosted glass - a focused image is actually projected on the screen so that the screen is in its correct position.

Tags: Canon Camera

Similar Questions

  • On the EOS 7 d Mark II is the supposed main dial to enlarge the image of reading?

    I want to check the sharpness that I pull on my EOS 7 d Mark ii. I know how to read the image. I can't click on the index/reduce/enlarge button to zoom. But I've also read where the main dial to zoom in even closer. Am I wrong? If so, my camera won't do. When I turn the main dial in play mode, it only contributes to the following image. Help please!

    On the 7Dd2, you press on the magnifying glass to zoom in, and then use the wheel near the shutter button to zoom more.

  • EOS 7 d Mark II vs 70 D

    Hi all

    I am an amateur (Techno IT by profession) and would like to know which one should I go for - EOS 7 d Mark II or 70 d? I have EOS 600 d for the last three years and lenses - lens 135mm kit, Canon macro 100mm, Tokina Wide angle and 400mm Tamron AF. However, I got my 600 d repaired twice in the last 1-2 years (Board of Directors has changed twice due to a technical problem - Canon Service does not gives me the details). I've spent some money on repair services so upgrade to a better.

    I usually shoot landscapes, macro, photography, Portraits (just started) and astrophotography. I would like to grow my photography skills additional for exhibitions and online sales beginning especially with photography of birds and wildlife. I'm fine with the budget for the two DSLRs. I put doubts still to go for 70 d and invest the remainder in 600mm Tamron.

    Please suggest that it fits my needs.

    Kind regards

    Sameer

    In my humble OPINION, both cameras are not comparable.  If the 7 d Mk II is in the budget, go for it.  It is not even a choice.

    There are no 600mm Tamron?  Do you mean the 150-600mm zoom?  Tamrom makes the lenses very little choice but the 150-600mm F/5-6. 3 Di VC USD has a $70 discount until the end of the month.  It's a remarkable lens for the money.

  • How to mark an issue as resolved?

    How can I mark an issue as resolved?

    Hi RedHatQueen,

    To mark a message as a Solution accepted, click the green check mark on the right side that says ' Solution? Feel free to send me a private message if you have any other questions.

  • Canon EOS 5 d Mark IV any photos in Lightroom CC2015/16 Raw 9.6

    Hello

    I bought a Canon EOS 5 d Mark IV. I tried to import my photos into the latest version of Lightroom CC2015/16 Raw 9.6.

    Lightroom program recognizes the camera or the photo to the cr2 format.


    What can I do to continue using Lightroom for photo importing or editing?

    Thank you

    Rgds,

    Frank

    Hello world

    6.7 Lightroom and Lightroom CC (2015.7) are now available and it includes support for Canon EOS 5 d Mark IV.

    Please upgrade to the latest version of Lightroom to help > updates menu.

    Release notes:-Lightroom CC now available 2015.7

    Kind regards

    Assani

  • Import error Canon EOS 5 d Mark III

    Error importing for Canon EOS 5 d Mark III - selection of import and copy as DNG, saving as of 2016 by date - great worked earlier as yesterday at 23:00. Today, I was unable to import all of my studio work today.

    Find the camera, starts automatically check files not imported, will allow me to add keywords, will still save the keywords after the closed will, give the message import files..., to even show that the copy and import photos seeks to work with the line measuring at the top near the logo LR - but will freeze and not move or import a single photo. No parameters have been changed and there is plenty of room. Using iMac with new operating system. Can you help me? I really need to turn around this work.

    Big thank you.

    Daphne

    Thank you!

    Card reader worked like a charm!

    Thank you very much.

  • Could not import RAW files for Canon EOS 5 d Mark IV

    Hello

    I cannot import the Canon EOS 5 d Mark IV RAW files photoshop CS6 and lightroom 5.7.1

    I've updated to the last update (it does not)

    I tried to use DNG Converter as well (he couldn't read files)

    Please notify

    Hello world

    6.7 Lightroom and Lightroom CC (2015.7) are now available and it includes support for Canon EOS 5 d Mark IV.

    Please upgrade to the latest version of Lightroom to help > updates menu.

    Release notes:- Lightroom CC now available 2015.7

    Kind regards

    Sahil

  • EOS 5 d Mark IV

    When will be able to read the format of camera raw file 5 d Mark iv LR?

    Hello world

    6.7 Lightroom and Lightroom CC (2015.7) are now available and it includes support for Canon EOS 5 d Mark IV.

    Please upgrade to the latest version of Lightroom to help > updates menu.

    Release notes:-Lightroom CC now available 2015.7

    Kind regards

    Assani

  • Hallo liebe Helfer, habe Photoshop CS 4. Nun habe ich mir die Canon Eos 5 d Mark III so. Wie kann ich Bilder RAW öffnen und bearbeiten?

    Hallo liebe Helfer, habe Photoshop CS 4. Nun habe ich mir die Canon Eos 5 d Mark III so. Wie kann ich Bilder RAW öffnen und bearbeiten?

    It will be necessary to be able to use the free Adobe's DNG Converter to create negative digital copies of your raw files. The camera that was purchased requires camera raw 6.7 at least, but in my view, full support has been added in Camera Raw 7.1. These versions of Camera Raw are not compatible with Photoshop CS4.

  • I have a Canon EOS 7 d Mark II. I would like to shoot RAW files. Is there a version of PS that I can use to adjust the CR2 files without having to adapt to DNG files, first?

    I have a Canon EOS 7 d Mark II. I would like to shoot RAW files. Is there a version of PS that I can use to adjust the CR2 files without having to adapt to DNG files, first?

    Hi Nesta,

    This camera requires Camera raw 8.7, versions of Photoshop CS top ^ (latest) should be able to process raw images from this camera.

    Recommend you go with the last a Photo collage software | Download the free trial version Photoshop CC

    Kind regards

    Assani

  • Can't open any of my CR2 files from my Canon EOS 5 d Mark III using PS Cs6

    Hi, im in CS6

    I can't open any of my CR2 files from my Canon EOS 5 d Mark III

    Please guide me on how to make this work

    Thank you

    Ralph

    Hi Raoul,.

    Please make sure that Photoshop cs6 is up-to-date and you have the camera raw installed 9.1.1. Refer to keep up-to-date Photoshop

    Kind regards

    Assani

  • Verarbeitung von Raw-Dateien der aus Canon EOS 7 d Mark II in Photoshop elements 12

    There are ein Update für die Verarbeitung von Raw-Dateien aus der Canon EOS 7 d Mark II as Photoshop elements 12? Das Programm habe ich auf die latest Version updated already mit Foto 8.5 Raw

    Your camera must v8.7, that is compatible with PSE13. But you can convert to Raw DNG (Adobe).

    You can get the latest software free DNG converter 9.1.1 for Windows or Mac from following link. DNG files will then work with your current software (keep your originals as backups and for use in the software of the camera factory)

    To download click here-DNG Converter 9.1.1

  • Is the new Canon EOS 7 d Mark II supported creative cloud?

    Is the new Canon EOS 7 d Mark II supported in Lightroom and Photoshop in creative cloud?  If not, is anyway to know when it will be? My latest version of Lightroom (5.6) does not recognize this camera RAW files.

    Native support of Lightroom for the D750 has been added in the Lightroom update published 5.7 tonight.

    Version details:

    Lightroom 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/lightroom-5-7-now-available.html

    Camera Raw 5.7: vailable.html http://blogs.adobe.com/lightroomjournal/2014/11/camera-raw-8-7-and-dng-converter-8-7-now-a

  • EOS 5 d Mark III of Raw files

    It's there are Camera Raw plugin for PES 10 that works with Canon EOS 5 d raw files Mark III.

    You can download and install the latest ACR 6.7 of the link

    http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5383

    [MODERATOR: updated above link, which was to download Adobe Camera Raw in Photoshop.] The updated link to day to download Adobe Camera Raw in Photoshop Elements]

    It supports the new cameras:

    • Canon EOS 1 d X
    • Canon EOS 5 d Mark III
    • Canon PowerShot G1 X
    • Canon PowerShot S100V
    • Fuji FinePix F505EXR
    • Fuji FinePix F605EXR
    • Fuji FinePix F770EXR
    • Fuji FinePix F775EXR
    • Fuji FinePix HS30EXR
    • Fuji FinePix HS33EXR
    • Fuji FinePix X - S1
    • Nikon D4
    • Nikon D800
    • Nikon D800E
    • Olympus E - M5
    • Pentax K-01
    • Samsung NX20
    • Samsung NX210
    • Samsung NX1000
    • Sony Alpha NEX-VG20
    • Sony SLT - A57

    Post edited by: Brett N

  • Opening of the EOS 5 d Mark II is CS4?

    I wonder if someone could help me please. I would buy photoshop CS4 for my husband for his birthday (just a couple of weeks a way), but I don't know if it's the right thing or not. My husband has just upgraded his camera (of an EOS 5 d to an EOS 5 d Mark II), he never had a problem at the opening of the EOS 5 d images in photoshop cs3, but cannot open the EOS 5 d images Mark II. I read that he needs of camera raw 5, but it is only compatible with cs4. Is this true? What he wants to do, it of take a picture with his camera and then open the raw file in photoshop without loss of quality at all (I guess that means keep as a psd?). Cs4 that will?

    Sorry if I ask a lot of questions but I really want to get the right thing for him.

    Thanks in advance.

    CS4 will certainly open the pictures and the Camera RAW are associated plugin is a big upgrade from CS3. But your husband can download the free DNG Converter, convert its new Mark II RAW files using that and then open them in CS3.

    I hope you don't take this the wrong sense but on you for the purchase of your husband for his b - day software. It's super hot. I'm jealous.

    http://www.Adobe.com/products/DNG/

Maybe you are looking for

  • Cannot access portfolio after the upgrade to iOS 10

    I haven't seen this pop up on other forums yet, but my iPhone 6 Plus does not double tapping on my lock screen after that I upgraded to iOS 10. I went into the settings of the portfolio and Apple pay and made sure that allow access when it is locked

  • Passage of the value of sub vi

    Hello I am programming some hardware and I'm having a pretty basic problem. I have a sub VI which controls the aquistion of data having a busy boolean signal that is set to true when the equitpiment is activated.  I would like to pass this signal on

  • cd/DVD drives not recognized by the computer.

    Some full scans there is our operating system to xp does not recognize our 2 dvd/cd players after a full scan, by security essentials. We went into the control panel to check the cd/dvd drivers... and they were gone.  Then we went in the 'my computer

  • on board the keyboard beep with each character pushed and be maintained for 3 seconds to type each letter

    Help, please. This is beyond frustrating. each key will beep when they are affected, but if I touch it will type. Please help with ideas.

  • Use WAG54G2 as a router.

    I want to use WAG54G2 as a simple router. I happen to have 2 of them. If I can make one of these work as a wired router via ethernet cable or even wireless I can save money on the router. Is this possible?