Eplorer.exe error 0xc0000022

Similar Questions

• CFS remedy cannot not explorer.exe error 0xc0000022 and I can look at the log.

  I left my computer for an errand, returned to my computer all frozen. After the reboot (forced turned then), I was unable to start correctly. The error was 0xc0000022, with explorer, cannot start properly. I had to put an end to the program. From there on, the screen is all black with a cursor. I can the ctrl + alt + delete to restart and run programs through "New task" in the Task Manager. So I can run cmd and others, but I'm unable to run programs with administrative power.

  I started it in safe mode and it works. I tried system restore to a point much earlier 1 week. And who showed no progress.
  I tried the System File Checker. There are a few files that it could not fix. So now my problem is to find the journal to find these files and fix it.
  Then issue:
  How can I find the log of CFS and how to fix the files?
  I use this link as support: http://support.microsoft.com/kb/929833
  Mike

  Hi mike51591,

  Please take a look at SpiritX MS MVPof message in this thread similar here with a solution as possible.

  I hope this helps!

• Acrobat.exe - Application error 0xc0000022

  Can anyone help with this error because I think it is perhaps down to the admin rights? Acrobat.exe - Application error 0xc0000022

  Could be. Try to run the application as administrator.

  We sat, 27 Sep 2016 at 14:10, leew83235145 [email protected]>

• Windows Activation error 0XC0000022 8

  use slui 3 to enter my product key and it gives me this error 0xC0000022. Help, please
  If before you click activate it said that product key will work.

  Hi Sunny,

  For you help I would be grateful if you could answer the following questions:

  (1) is that the computer is connected to a domain?

  (2) it is the first time you activate the operating system of Windows 8?

  (3) is that the same Windows 8 operating system software is installed on a different computer?

  (4) is a security software installed on the computer?

  Try to activate the windows through "phone Activation".

  (a), press Windows key + X then click run, then type: slui.exe 4

  (b) press the "ENTER" key

  (c) select your "Country" in the list.

  (d) choose the option "Activate phone" .

  (e) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  Check out the link,

  How to contact a Microsoft Product Activation Center by phone

  http://support.Microsoft.com/kb/950929

  Why can't I activate Windows?

  http://Windows.Microsoft.com/en-in/Windows-8/why-activate-Windows

  If you need help with Windows, please let us know we will be happy to help you.

• Example: Pavilion dv6: after starting the laptop it is showing a request for sgm.exe error crash

  My computer starts up and I am able to work on it, but showing the sgm.exe error

  Hello

  Thanks for posting in the Forum from HP Support.

  The error occurs because there is a problem with this application.

  I did some research and I am unable to find such a program with this name that is popular and reputable.

  Having said that, I also found some virus/malware that uses this name.

  Search your computer for threats/viruses using these free tools:

  -> ESET Online Scanner

  http://support.eset.com/kb2921/?locale=EN_US & viewlocale = en_US

  http://www.eset.com/int/home/products/online-scanner/

  -> HitmanPro

  http://www.SurfRight.nl/en/hitmanpro

  http://www.SurfRight.nl/en/downloads/

  -> AdwCleaner

  http://www.bleepingcomputer.com/download/adwcleaner/

  If these tools find a malware with this name and extension, remove and others, also.

  Please, let me know the results of the analysis.  You can also provide screenshots if you want

  http://www.take-a-screenshot.org/

• AccelerometerSt.exe error on the computer Windows 10 brand new

  I have the same problem that many others have with the Application AccelerometerSt.exe error.   BUT, I have a brand new - 1 week old computer and it came with 10 windows already on it.  I have the HP Envy x 360.   How do you intend that to solve the problem.   If you uninstall and reinstall Windows 10, I'll need much more detailed information.   I don't know how to do this - which was the reason why I only watched computers with her already preinstalled.

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• Explorer.exe error

  Hello

  I have HP Pavilion e002au laptop bought about 5 months back with Windows 8.

  I get the explorer.exe error after logging in each time. The laptop seems to work normally, but can someone please tell me what this error is and how it can be eliminated?

  I have an original version of Windows antivirus updates and get regularly.

  Is it dangerous for the laptop?

  Kind regards

  Vikram P. Gupte

  Hi Vikram6880,

  During the execution of any type of control system, you should always back up your documents. The update affects all documents. It was simply an update of the system.

  Thank you.

• nidevmon.exe error 0xc0000142 / niusb6009 multifunction i/o

  Our Labview application collects analog data using an e/s of the Multifuncion niusb6009. The application is proven and has been in production for years.

  Today, the application has stopped to receive analog data. After the termination of the application, shut down our computer w / Windows XP Pro SP2.

  The computer and Windows has restarted. At the opening of our LabView Application, the following error appears:

  nidevmon.exe error: "the Application failed to initialize properly (0xc0000142) click OK to terminate the application.»

  Scuba Steve Howdy!

  Is there something that could have been changed software/hardware-wise on the machine before this error occurring?  Also, what version of LabVIEW and DAQmx do you use?

  This could be caused by a number of different things of nidevmon.exe.  Please look over this article in the knowledge base for possible solutions to the problem.

  Kind regards

• mscorsvw.exe error

  While my pc was going through updates to MS, he projected blue.  After the reboot, I now get mscorsvw.exe error

  Hi frank platt,.

  What the full error messages you found?

  After return from error messages full so that we can help you better.
   
  I suggest you to reset the Windows Update components. Then try to install an update at a time and checking update problem. After return to status so that we can help you better.

  To reset the Windows Update components visit the link below and click on solve this button / follow the given steps to repair it yourself.
  http://support.Microsoft.com/kb/971058

  Hope this information is useful.
   
  Umesh P - Microsoft Support

• I can't install WGAPluginInstall.exe error 0 x 80070003 help

  HI the FRIENDS MY SYSTEM IS SICK, I CAN NOT INSTALL WGAPluginInstall.exe ERROR IS 0 x 80070003 I CAN'T DOWNLOAD ANY FILE WITH DOWNLOAD MANAGER (CONNECTION WITH the SERVER IS LOST) I CAN'T OPEN the DOWNLOAD of PAGES WEB BROWSER VIEW WITH BROWSER WEB MY ANTI VIRUS IS up to DATE I am not CONFUSING WHAT IS THE PROBLEM

  Amin,

  Remove the download directory and then to return to the update sites. to do this, follow these steps:

  1. stop the automatic updates service. to do this, follow these steps:

  a. Click Start, click Run, typeservices.mscand then click ok.

  b. Automatic Updates service right click and then click on stop.

  c. minimize the software component services snap-in.

  2. rename the c:\Windows\SoftwareDistribution directory. to do this, follow these steps:

  a. Click Start, click Run, typecmdand then click ok.

  b. type cd %windir%, and then press ENTER.

  c. type ren C:\Windows\SoftwareDistribution SDTemp, and then press enter

  d. type exitand press ENTER.

  Note when you delete the folder % windir%\softwaredistribution, the history list is erased from the section "review updates" site web windows update. This action will not affect the updates installed on your computer. subsequent updates will appear in the history list.

  3. start the automatic updates service. to do this, follow these steps:

  a. expand the component services snap-in.

  b. right click on updates service automatic and then click Start.

  c. close the window of the software component services snap-in.

  4. visit the website of windows update, the microsoft update web site or the server wsus again and then download an update.

  5. If you still receive the same mistakes, make sure you have correctly completed steps 1-3.

  6. If you can't always install the update, see the following microsoft knowledge base:

  http://support.Microsoft.com/kb/906602/ installation problems troubleshooting windows update, microsoft update and windows server update

• Daemonu.exe error turns off my computer. How do fix?

  Often, I get an error message after my computer shuts down-Daemonu.exe error.  Is there something to fix this problem?  Thank you.

  Hello

  It's the Nvidia Update Manager, so you must check with their Support and Forums.
  Would be a good idea to update the driver or re - install the last longer if not recent exists.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  Kindly help.

  Hi Sophie,.

  Your Windows Server 2003 issue is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• application spoolsv.exe error.

  I have windows xp and I get the application spoolsv.exe error. It gives me the following message is displayed: the Instruction at 0x01fb0374 referenced memory at 0x1fed12c0 memory cannot be read. "I don't know what to do about this.  Help, please.  * E-mail address is removed from the privacy *

  Hello

  1 did you change on your computer?

  2. what service pack is installed on your computer?

  3. when exactly did you receive this error message?

  4. What is the brand and the number of the printer model do you use?

  Method 1:

  I suggest you try the steps suggested by Anthony - Support Engineer from the below mentioned link and check if it helps. These steps are for Windows Vista and should work as well on Windows XP.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/spoolsvexe-application-error/0a7b0b15-77b3-4a8f-9465-dff8517c226e

  Method 2:

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  http://support.Microsoft.com/kb/810894

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,

  Method 3:

  I also suggest you to follow the link and check.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  See also:

  How to cancel printing or to delete a print job that is stuck in the print queue in Windows XP

  http://support.Microsoft.com/GP/pc_print_methoddstoptheprin

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• nipalsm.exe error

  I currently have LabVIEW 2009 installed and NiDAQ 9.0.1. I am trying to connect to cDAQ 9174, with the NI9401 and NI9263 modules. When you connect the cDAQ, that an error occurs:

  nipalsm.exe error

  The instruction at 0x6efdfde3 referenced memory at 0 x 00000034, the memory could not be 'read '.

  The cDAQ appears in the list of devices, but fails self-tests and nor modules are recognized. Also the cDAQ access to the list of devices cannot deleted even before the device is connected.

  I tried to use the program to software installation OR repair NIMAX and tried to uninstall and reinstall absolutely everything. (even on the complete reinstall the cDAQ device seems not connected on the list of the devices before connecting for the first time)

  have you seen this

• trl120.bpl/Setup.exe error updating panda internet from 2011 to 2012

  Tried to update my panda internet between t0 and 2011 2012 and I sysytem mechanic.now I have the app missing rtl120.bpl and he says panda has stopped working I tried to re - install panda from the disc, gets most of the setup.exe error then made way. Thanks for reading. (email removed for privacy)

  Hello

  I would like to do you right click on the file setup.exe and run as administrator.

  If this is little help, contact the manufacturer to better aid.