Similar Questions

• EPM 11.1.2.3.500 and IE10 compatibility issues

  Maybe I missed something, but after I installed the 500PSU and using IE10, I found the following:

  I am able to connect in the workspace and HFM with no compatibility setting (native IE10)

  I am only able to connect to the FDM with IE10 in compatibility mode

  Is this normal or did I miss something on the side FDM, I thought all EMP 11.1.2.3.500 IE10 certified?

  We are using IIS and OSH on Win2k8r2

  Hello

  Did you follow the additional steps for FDM in the Readme for the 11.1.2.3.500 patch? I have them copied below:

  Additional steps for managing the quality of financial data

  If you plan to use Internet Explorer 10 with FDM, please add to IIS 7 and IIS 6 HTTP response header, by following the steps below:

  Adds a header of HTTP to IIS 7 response:

  1. Open IIS.
  2. Expand the server name in the left pane: expand Sites, and then expand default Web site, and select HyperionFDM.
  3. In the right pane, under IIS, double-click HTTP response headers.
  4. On the right, under Actions, click Add.
  5. Add new response HTTP X-UA-Compatible header name and the IE value = EmulateIE9.
  6. Save the changes.
  7. Recycle the AppPool HyperionFDMAppPool.

  Adds a for IIS 6 HTTP response header:

  1. Open IIS.
  2. Expand the server name in the left pane: expand Web Sites, and then expand default Web Site, and select HyperionFDM.
  3. Right-click on the HyperionFDM site and click Properties.
  4. Select the HTTP Headers tab.
  5. Under the custom HTTP headers, click Add.
  6. Add new response HTTP X-UA-Compatible header name and the IE value = EmulateIE9.
  7. Save the changes.
  8. Recycle the AppPool HyperionFDMAppPool.

  If you have not followed these steps that could well be your problem.

  -Dan

• Replacement cables SHC68-68-EPM?

  I have a PXI-6363.  The recommended cable is the SHC68-68-EPM cable.  I have one of these practices, but need 2.  I found a couple of unused cables carrying around (NI SHC68-68 - RMIO & SHC68 - 68 - RDIO).  Can I use one of these as a substitute for a cable EPM?

  I am not convinced that you can simply replace them and if they don't work it wouldn't be ideal. On the one hand, the SHC68-68-EPM cable specifies that it ends by a shift of VHDCI 68 pin, while others are just VHDCI, but I was not able to find information about the difference. In addition, they list compatibility for X and M series for RMIO or RDIO cable. While they are all 68 pin cables there are huge differences in grouping and shielding wire, and they are all optimized for different features/data acquisition cards. I found the mappings of wire for the EPM and RMIO which illustrates this.

  Wire mapping list to the SHC68-68-EPM cable

  http://digital.NI.com/public.nsf/allkb/DE2D842E545DE64B86256F78006EAB1A

  RMIO cable Wire Mapping

  http://digital.natinst.com/public.nsf/ $CXIV/ATTACH-AEEE-88AQJT/$FILE/SHC68-68-RMIO.png

• EPM 11.1.2.4 - IIS on Windows R2 2012 configuration problem

  Hi all

  I'm done installing Hyperion 11.1.2.4 on 2012 R2 in Windows version, while the configuration, I get the error below.

  

  Windows 2012 R2 comes with version 8.5 of IIS. I checked in IIS, there is 'Default Web site' and open the IIS to the Internet Explorer browser without any problem.

  I checked the matrix certification for Hyperion 11.1.2.4, that they have specified only IIS 6 and IIS 7.x for the Web and applications, server and Windows 2012 R2 for the OS but there is no exception "Server EPMA Dimension".

  Note: The configuration of IIS 7.x specify up to Windows 2008 R2.

  No someone came across the question above? Please suggest

  You have followed all the prereqs in the docs > Microsoft Internet Information Services (IIS)

  Maybe compatibility mode?

  I edited my original post because I have provided the link, but you just get people who say the same thing as the link so here's the info in the link (a single click if)

  Microsoft Internet Information Services (IIS)

  The following products require IIS must be installed with ASP.NET support is enabled before installing the EPM system product:

  • Performance Management architect Service (Server Dimension)
  • Strategic Finance
  • Data relationship management

  Notes on IIS:

  • In the Windows Server Manager, make sure that the following options are selected for the roles for the Web server (IIS):
    • ASP.NET Application developing
    • Compatibility with IIS 6 management under administrative tools (for IIS 7 and IIS 8 only)
  • If .NET is not detected, EPM System Installer installs the version required by your version of Windows.
  • On Windows 2008 and 2012 of Windows, if you configure the products requiring IIS, EPM System Configurator automatically configures the Windows Server roles required for IIS if they are not already installed.
  • If IIS is chosen as the web server during the configuration, you must allow all unknown ISAPI extensions through the Internet Information Services Manager.

  See you soon

  John

• Server size compatibility

  I'm installing EPM 11.1.2.3 on linux system. I have two question.

  1-dimension server is only used and required by EPMA? or can I use it with Classic applications too.

  2 - can I install server Dimension under Linux too? According to my research it only works on windows.

  Concerning

  Hello

  You're right about both.

  Server size is only used by EPMA.

  It only works on Windows.

  Just for your information, there is a document called 'Matrix of Support', there all compatibility information.

  Thank you

  Anjum

• How to disable the Message box 'the current compatibility setting is not supported. Turn off compatibility view before you run this web page.

  Hi all

  Since a few days, we are on 11.1.2.3.500 and using IE 11. In IE 11, we can use Oracle EPM Suite only in Enterprise Mode, otherwise only "Bindows" appears. Now, my question is how can I disable (or remove) the Popup Message "the current compatibility setting is not supported. Turn off compatibility view before you run this web page. "because it's really embarrassing that this message whenever I start a planning application, Manager of calc or what ever.

  Thanks a lot for your help.

  Kind regards

  André

  You can go to tools > compatibility view settings and you should be able to remove the Web site / uncheck compatibility view so that you won't get this message

  HTH

  Amarnath

  ORACLE | Essbase

• Essbase migration OS compatibility

  Hi team,
  Can you please confirm if there are problems with essbase migration from hp - ux to RHEL6. Can migrate data from L0 and contour / other artifacts from source to destination. There will be compatibility problems?
  
  Essbase 7.1.0 running 64-bit HP unix-> EPM 11.1.2.2 under RHEL 6 64-bit.
  
  Thanks for your time.
  
  Hari.

  You should be able to migrate the otl and other objects and export/import data, it might be interesting to try to use the EAS migration wizard if he can access two servers to essbase.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Hyperion Planning 11.1.1.3 compatibility with IE9

  Hello
  
  We have the problem after using IE9 in the workspace:
  During the passage of the art to the basic mode, the left frame in the workspace (where the list of task items appear) just freezes, while elements frame and menu key remain functional.
  
  We have already tried using the compatibility view but still does not work.
  
  This is a person who uses the IE9 with 11.1.1.3 version? Do you know how can I solve this problem?
  
  Kind regards
  Rodrigo

  Check the basic system EMP here platform journal: http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-2-128342.xls

  It looks like IE9 is supported with 11.1.1.4.

  Rahul has a recommendation however: Hyperion Planning 11.1.1.3 IE9 compatibility

  Not sure if it works because the person who started the thread did not answer in return.

  See you soon,.
  Mehmet

• 11.1.2.1 EPM system almost work - EPMA 404

  I managed to get most of these * 11.1.2.1 installation * goes, but there are a few problems, I always face. It seems that this is maybe a problem of configuration of IIS, but then again if I knew what it is, I wouldn't have to post!
  
  The servers are * 64-bit Windows Server 2008 R2 Enterprise *.
  Web server role is installed on the server of the Foundation (where shared Services, workspace, EPMA web apps, FR and ERPI are) and the Server services (where the EPMA Dimension server, EN, R print server & A setting Agent and FDM Task Manager are).
  IIS is configured with ASP.NET (but not classic ASP) and the IIS 6 Management Compatibility services. All Unknown ISAPI Extensions are allowed.
  
  My Hyperion_Home is E:\APPS\Oracle\Middleware\EPMSystem11R1
  
  After the configuration of IIS on the server of the Foundation, I have multiple virtual directories and application pools. Port 80 appears to be redirected correctly. For example, I get a window to connect to this address: http://foundation_server/awb/. I confirmed the 64-bit with impatience and proxy DLLs are in the directories of VirtualHosts.
  
  In the workspace (also accessed via port 80), I have a button explores and I can access the classic Planning Administration and the ERPI menu items.
  
  It seems to be EPMA that cause me problem. Also maybe Calc Manager. (I have planning and Calc Manager on a different server, and planning works OK. IIS is not installed on the Planning Server).
  
  The Dimension server starts and seems to be running and ready.
  
  In the workspace, I get the following results of these menu items:
  
  Dimension Library, library of the Application and the data synchronization all the performance:
  (404) not found
  Details: Code: org.apache.axis.AxisFault
  Description: An error occurred the result from the process server.
  Actor: no
  
  Manager of Calc (which seems to be missing its icon from the menu) yeilds:
  An error occurred the result from the process server.
  Details: Description: invalid or not found configuration of the module 'calcmgr.filterview '.
  .. then by...
  Calcmgr.filterview required application module is not configured.
  .. then by...
  A "Not Found" error occurred communicating with the server.
  Details:
  URI: http://foundation_server/calcmgr/conf/CalcMgrConfig.xml
  Status: 404 - Not Found
  (I also get a 404 at http://planning_server:8500/calcmgr/conf/CalcMgrConfig.xml))
  
  If I try to connect directly to EPMA to the awb URL:
  Failed to load the 'awb.appcontainer' module.
  .. then by the same AxisFault 404 as above.
  .. then of "Loading" and the clock that turns but never goes away
  
  
  Then... Here is my situation and my symptoms. Is there an overview of my problems?
  
  -Joe

  Starting with the 11.1.2.X all HTTP, including IIS servers are in front with OHS. I think that you will find this document useful.

  http://www.Oracle.com/technetwork/middleware/bi-Foundation/EPM-deploy-guide11121-1401625.PDF

  He explains the architecture and the steps.

• software compatibility

  Before I dive and upgrade to Sierra, I'm looking for a reliable source check the compatibility of the applications, I currently rely on.  Many are a bit dated.  Any suggestions?

  Main applications:

  Microsoft Office for Mac 2011 v 14.6.8

  Quicken for Mac 2007 v 16.2.4

  Photoshop CS5 x 64 new v12.0

  Roxio Toast 10 Titanium v 10.0

  Apple Pages, Numbers and Keynote ' 09

  Running OS X Lion mountain.

  Click here.

  (145086)

• I have to stay with OS10.7.5 due to software compatibility, but is it possible to update Safari to latest version during your stay on OS10.7.5

  I have to stay with OS10.7.5 due to software compatibility, but is it possible to update Safari to latest version during your stay on OS10.7.5. How this is done. Thank you very much.

  It is not possible to update Safari past 6.1.6 on Lion.

  (144969)

• How to: Crush 3/iMac 5 k (compatibility mode)

  Hello friends,

  I see quite a few new features on the market with Thunderbolt 3. According to the FAQ of TB3 Intel, TB1 and TB2 was designed with future upgrades in mind. This means that you can connect, once a solution is available, on a host of TB2 TB3 system using compatibility mode. It will only work to 20Gbps TB2, but work remains. The same is true of peripheral TB2 TB3 host computer (will work but at slower speed)

  This would be similar to the connection of a USB 3 device on a USB 2 or 1 USB host but only get speeds over slow or vice versa.

  
  

  The question I have is that if someone came out with these fittings/adapters? What I've seen online seems to go using a device of TB2 and TB3 host and each of these adapters is Windows only. I have spent too many hours searching so I'm curious to know if someone has yet to fall on an adapter or converter that connect DisplayPort TB2 host and have the device USB-C/TB3 (USB - C not only) in compatibility mode.

  The reason? Peripheral TB3 are already less expensive than TB2 devices. I don't know who will get the most expensive. I don't care 40Gbps if he gives me a simple way to add multiple devices USB 3.0, exhibitions and maybe the eSata device. I know there are hubs, but I would prefer something that is the test of the future TB3 would be cheaper and future proof for NeXTGen computers.

  (Sorry for the TL; DR but it is always a person who does not read or "assume" it is a noob question and gives an answer "Captain Obvious". Don't BE this guy here...)
  

  Sincere greetings,

  Jorge Uptown

  JLopez. Chicago wrote:

  The question I have is that if someone came out with these fittings/adapters?

  bolt-adapter https://www.StarTech.com/cables/Thunderbolt-3-cables/Thunderbolt-3-USB-c-Thunder ~ TBT3TBTADAP

  

• DIGITAL CAMERA RAW COMPATIBILITY UPDATE 6.21

  ***? How many times I have to do? I'm FED UP! I don't care ABOUT RAW! Update your program... I have

  NEVER USE!  NOT my computer!

  You're not talking Apple here.  It is a moderated forum for Apple to discuss features and troubleshooting. Apple-> system-> software update Preferences menu contains options to disable automatic downloads, although the Mac App Store update itself for Snow Leopard activates the automatic notifications of updates.  While a nuisance, you have just to tell more later, only choose to update once you have read the documentation to verify that its good operation with what you have.  Always back up your data before allowing updates.

  For direct feedback to Apple, who may have only one impact of future operating systems, http://www.apple.com/feedback

  If you find that a specific update has compatibility issues, we invite you to sign up for a free developer online account on http://developer.apple.com and submit a bug report to http://bugreporter.apple.com where you can know at least that if it's something reported before.  But this will not use or disclose this information here because of a confidentiality agreement.

• ANT or heart Bluetooth Monitor strap compatibility?

  That is, compatibility with A separate more specific ANT/Bluetooth Heart Monitor strap?

  Hello

  If preferred to use the integrated heart rate monitor, Apple Watch can measure your heart rate via an external pair Bluetooth chest strap cardiofrequence-meter.

  More information:

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

  Use the Bluetooth with your Apple Watch - Apple Support Accessories

• Corrupt Digital Raw compatibility update

  I have my macbook set to do automatic updates. I see a light red on the App Store, which shows an updated - and when I check it said provision, "Digital Raw Compatibility Update, version 6.20. I scroll down and see that it has installed this update even at least 10 times start on 13 August through 24 August! Even updated, same version and I think it's a corrupted file or virus! Help, I want to stop saying that I need to update!

  Hello cdaniels31.

  Thank you for using communities Support from Apple. I understand that the Digital Raw compatibility update, version 6.20 performed several times, but the App Store there is always a full update. I am pleased to provide you with advice for this problem.

  First of all, let me put your mind at ease. It is an updated official Apple for the compatibility of the RAW for OS X El Capitan image, not a virus. It seems that OS X is not recognizing that it was already done.

  Let's start troubleshooting by restarting your MacBook. Then we will try to complete the update by using the link below, instead of using the App Store.

  Digital Raw Compatibility Update, version 6.20

  Finally, restart your MacBook, once more.

  Kind regards.