Similar Questions

• How do I uninstall the product from the Oracle EPM system

  Hi all

  y at - there no way how to uninstall a product of the Oracle EPM system?

  I don't want to uninstall the entire system and install again, I want to just uninstall the specific product.

  BR

  Vladislav

  OK, you can safely remove the service once the components have been uninstalled.

  Let me know which are the components you want to uninstall.

  To check the inventory:

  Go to the directory OPATCH. This gives the entire list.

  lsinventory-detail opatch - oh -jre

  Ex: opatch lsinventory-detail - oh D:/Oracle/Middleware/EPMSystem11R1/jre-D:, Oracle, Middleware, jdk160_45

  If you want to make sure that applications are not anywhere, you can also check in the following locations

  1. connect to the Weblogic administration Console, http://servername:7001 / console. Confirm if the managed server is removed by going to the servers

  2 EMP registry report (usually E:/Oracle/Middleware/userprojects/epmsystem1/bin/epmregistry.bat)

  3. Windows registry

  Thank you

  Anjum

• EPMA Configure Database cause EPM System Configurator Crash

  It is an EMP 11.1.2.2 distributed environment on Windows 2008 R2 system patched to 300 for all installed products. The system worked all fine until the DBA required to change the passwords for security reasons.
  
  The passwords for the Weblogic administrator, the repository of databases has changed. We went through the system configurations and changed all the passwords in all the right places and everything works, except for the Dimension EMP architect server. All other product launch and we can identify you and use them.
  
  For the server architect EMP Dimension, we are unable to update the password for the database. In the EPM system configurator, when we choose to "Set up the data base" for EMP architect, we enter the connection information and click Next and the utility workers indicating an application error.
  
  The only mistake anywhere is in the configtool.log file which simply says:
  
  [2013 01-30 T 11: 34:00.420 - 05:00] [EPMCFG] [TRACE] [EPMCFG-01758] [oracle. EPMCFG] [tid: 16] [ecid: 0000JmCJgspEwGIFmrADS31H2KhK000003, 0] [SRC_CLASS: com.hyperion.config.wizard.impl.DBConnectionForm] is of type DB Oracle
  [2013 01-30 T 11: 34:00.420 - 05:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle. EPMCFG] [tid: 16] [ecid: 0000JmCJgspEwGIFmrADS31H2KhK000003, 0] [SRC_CLASS: com.hyperion.cis.config.Configurator] error: []
  java.lang.NoClassDefFoundError: com, hyperion, cis, ISMPWizardServices
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:247)
  at com.hyperion.cis.config.Configurator.loadClass(Configurator.java:172)
  at com.hyperion.cis.config.Configurator.loadProductDBConfigurators(Configurator.java:201)
  to com.hyperion.config.wizard.impl.DBWizardState$ 1.validate(DBWizardState.java:348)
  to com.hyperion.hit.wizard.Wizard$ NextClass.run (Wizard.java:531)
  at java.lang.Thread.run(Thread.java:662)
  Caused by: java.lang.ClassNotFoundException: com.hyperion.cis.ISMPWizardServices
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
  ... 7 more
  
  ]]
  [2013 01-30 T 11: 34:00.420 - 05:00] [EPMCFG] [TRACE] [EPMCFG-01173] [oracle. EPMCFG] [tid: 16] [ecid: 0000JmCJgspEwGIFmrADS31H2KhK000003, 0] [SRC_CLASS: com.hyperion.config.wizard.impl.DBWizardState] default cluster was found in the registry: Performance Management architect
  [2013 01-30 T 11: 34:00.451 - 05:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle. EPMINS] [tid: 16] [ecid: 0000JmCJgspEwGIFmrADS31H2KhK000003, 0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: unexpected error: []
  java.lang.NullPointerException
  to com.hyperion.config.wizard.impl.DBWizardState$ 1.validate(DBWizardState.java:360)
  to com.hyperion.hit.wizard.Wizard$ NextClass.run (Wizard.java:531)
  at java.lang.Thread.run(Thread.java:662)
  
  ]]
  
  We the ODAC uninstalled and reinstalled, but it has not made a difference. The user schema is not locked (confirmed through sql, as well as on the same machine as EPMA).
  Not updated in the product of the EMP password, because if we try to start the server of EPMA, it fails stating that the name of username/password is not valid.
  
  Guidance will be helpful, because at this point, the EPM architect is unusable.
  
  Thank you

  The reason is that the Oracle patch broke the jar AWBConfig.jar located
  d:\oracle\Middleware\EPMSystem11R1\products\Foundation\BPMA\Common

  There are missing classes in the patched version, latest of this pot

  To correct the configuration tool, you can make a copy of that existing pot and replace the old version uncorrected. To find the old version research
  \oracle\Middleware\EPMSystem11R1\.patch_storage\ to AwbConfig.jar

  To confirm this, look at the size of the current pot and the oldest pot - the news is 158 k and the former was 317 k - obviously a new miss some classes.

  Once you are done with the config tool put a "newer" back

  Nick

• Start the EPM system

  I work in 11.1.2.1 in a distributed environment. When I click on the 'Start EPM System' shortcut in the menu programs, it starts only local services and not the services on the other two servers. I have some other problems with the environment, and I wonder if something prevents all services in the distributed environment to start.
  
  So I guess the question is: is this shortcut to start all services in a distributed environment? In other environments for the same customer, seems to be the case.
  
  Thanks for your time.

  He will begin the EPM service on the machine, it runs, if you want to start the services on multiple computers, you can develop your own scripts.

  Documentation
  "Running the unique on a computer startup script in your system deployment EPM starts all EPM system services installed on this computer."

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Work with EPM system Workspace

  Hello
  
  I would use the EPM system to its full potential, while I was trying to see if it was possible to open Excel and Access files within a content window / tab.
  
  I tried to import an Access file and he told me that I needed to create a new MIME type. I have skiped who moved to Excel to test. I imported the excel file into a folder where start with content.htm sample is no problem, added to Favorites and tried to open it but turned excel does not and it did not open within the area of the workspace.
  
  Anyway is there a documentation / blog that you can recommend me to explore the workspace, options and create a portal for end-users to collaborate?
  
  Thank you
  
  Published by: Icebergue on March 22, 2012 04:04 - typos

  Hello

  You can have a look here where all official documentation Suite EPM is: http://www.oracle.com/technetwork/middleware/performance-management/documentation/index.html

  Good luck!

  Published by: Ringo on March 22, 2012 13:09

• 11.1.1.1 with WebLogic Server 10.3 EPM system

  I'm installing 11.1.1.1 EPM system and that you have already installed WebLogic Server 10.3, which seems to be the Oracle AS 10gR 3 GPE 11.1.1.1-compatible server.
  
  However, I get the following error:
  The specified location is a directory of Oracle AS 10 g 3 invalid. Specify a valid location.
  
  11.1.1.1 EPM system is compatible with WebLogic Server 10.3?
  Y at - it a 10gR 3 Oracle AS different I should use? If Yes, where can I get it?
  
  Thank you
  Mark

  Hello

  I don't think that it is officially supported for 11.1.1.1.
  Take a look on:-http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install_start_here_11111/ch04s03s01.html
  It lists the supported web application servers.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• 11.1.2.2 Quick Setup - EPM System diagnosis does not work

  Hello

  I finished the EPM 11.1.2.2 EMP quick installation on Windows server 2008 R2.  Everything seemed to work, but when I run the diagnostic system EMP no report is generated.  A command prompt appears briefly, and then exits.

  I've not seen anyone else posting on this issue.  Any idea would be appreciated.

  Thank you!

  Maybe it's the issue that the system does not have enough memory to run the diagnostic tests.

  Locate the validate.bat & run, since invites it order & see this error message at its launch.

  You can try to run like this: validate.bat - ignoreChecks

  Kind regards

  Santy.

• End of life for oracle EPM system

  Hi guys,.
  
  Someone asked me a strange question.
  
  They asked if there is a technical end of life/support for the EPM (particularly 11.1.2.1) of oracle system.
  
  I've never met any specific documentation regarding this. Someone else?
  
  Thank you very much

  Maybe this doc will help you - http://www.oracle.com/us/support/library/lifetime-support-applications-069216.pdf

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to get Hyperion EPM system additional content release 11.1.2.1?

  Hello!
  
  I'm Hyperion EPM 11.1.2.1.0 on Windows Server 2008 x 64 deployment.
  I have done all the prerequisites for the deployment and downloaded all the required files delivery.
  However when I run the Setup, I get the message that the Assembly StaticContent is missing. I saw in the installation guide that this Assembly is in Oracle Hyperion Enterprise
  File Performance Management System Release contained additional 11.1.2.1.0 but I can't find this OTN file, nor on delivery!
  
  So, I'll be very grateful if you can give me information on where I can find this file.

  Additional content can be found on delivery after looking 11.1.2.1 components. It is part number V25494-01 - Oracle Hyperion Enterprise Performance Management System additional content Release 11.1.2.1.0

• Configure the EPM system to be able to produce PDFS 11.1.2.1

  "PDF has not been configured for this web server.
  
  Configure the system EPM to be able to produce financial reports Workspace 11.1.2.1 PDFS. Anyone know how to configure this feature?

  Take a look on the underside of docs in MOS:

  Financial Reporting PDF overview of the output fails with the error: "PDF has not been configured for this Web server" (Doc ID 1108654.1)

  Open a report in the workspace: "PDF has not been configured for this Web server" (Doc ID 791376.1)

  How to create a HRPrinters for financial reporting (EN) (Doc ID 1100899.1)

  HTH-
  Jasmine.

• 11.1.2.1 EPM system.

  Hello!
  
  I have a question.
  Explain how best to install the system. I need to create each individual plan for each configuration of database product (planning, essbase, reports,...)
  
  THX.

  It is covered here - http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_start_here_11121/frameset.htm?ch06s01.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• 11.1.2.1 EPM system almost work - EPMA 404

  I managed to get most of these * 11.1.2.1 installation * goes, but there are a few problems, I always face. It seems that this is maybe a problem of configuration of IIS, but then again if I knew what it is, I wouldn't have to post!
  
  The servers are * 64-bit Windows Server 2008 R2 Enterprise *.
  Web server role is installed on the server of the Foundation (where shared Services, workspace, EPMA web apps, FR and ERPI are) and the Server services (where the EPMA Dimension server, EN, R print server & A setting Agent and FDM Task Manager are).
  IIS is configured with ASP.NET (but not classic ASP) and the IIS 6 Management Compatibility services. All Unknown ISAPI Extensions are allowed.
  
  My Hyperion_Home is E:\APPS\Oracle\Middleware\EPMSystem11R1
  
  After the configuration of IIS on the server of the Foundation, I have multiple virtual directories and application pools. Port 80 appears to be redirected correctly. For example, I get a window to connect to this address: http://foundation_server/awb/. I confirmed the 64-bit with impatience and proxy DLLs are in the directories of VirtualHosts.
  
  In the workspace (also accessed via port 80), I have a button explores and I can access the classic Planning Administration and the ERPI menu items.
  
  It seems to be EPMA that cause me problem. Also maybe Calc Manager. (I have planning and Calc Manager on a different server, and planning works OK. IIS is not installed on the Planning Server).
  
  The Dimension server starts and seems to be running and ready.
  
  In the workspace, I get the following results of these menu items:
  
  Dimension Library, library of the Application and the data synchronization all the performance:
  (404) not found
  Details: Code: org.apache.axis.AxisFault
  Description: An error occurred the result from the process server.
  Actor: no
  
  Manager of Calc (which seems to be missing its icon from the menu) yeilds:
  An error occurred the result from the process server.
  Details: Description: invalid or not found configuration of the module 'calcmgr.filterview '.
  .. then by...
  Calcmgr.filterview required application module is not configured.
  .. then by...
  A "Not Found" error occurred communicating with the server.
  Details:
  URI: http://foundation_server/calcmgr/conf/CalcMgrConfig.xml
  Status: 404 - Not Found
  (I also get a 404 at http://planning_server:8500/calcmgr/conf/CalcMgrConfig.xml))
  
  If I try to connect directly to EPMA to the awb URL:
  Failed to load the 'awb.appcontainer' module.
  .. then by the same AxisFault 404 as above.
  .. then of "Loading" and the clock that turns but never goes away
  
  
  Then... Here is my situation and my symptoms. Is there an overview of my problems?
  
  -Joe

  Starting with the 11.1.2.X all HTTP, including IIS servers are in front with OHS. I think that you will find this document useful.

  http://www.Oracle.com/technetwork/middleware/bi-Foundation/EPM-deploy-guide11121-1401625.PDF

  He explains the architecture and the steps.

• Database Oracle EPM system

  Hello

  The COnfiguration of Hyperion to oracle database character for Hyperion 11 sets: • AL32UTF8 (encoding UTF-8 to ASCII platforms) • UTF8 (coding for Oracle backward compatible) • UTFE (encoding UTF-8 for the EBCDIC platforms) is required to answer this with the database configuration conditions. Can we have more about considerations when creating database NLS_CHARACTERSET WE8ISO8859P1 NLS_NCHAR_CHARACTERSET AL16UTF16 NLS_NUMERIC_CHARACTERS., when the database was created. is that it creates no problem setting up database. Please notify.

  As long as you follow what is defined in the documentation you will be ok:

  Considerations for creating Oracle database

  The database must be created using Unicode Transformation Format UTF-8 encoding (character set). Oracle supports the following character with the UTF-8 encoding sets:

  • AL32UTF8 (UTF-8 encoding for ASCII platforms)
  • UTF8 (backward compatible coding for Oracle)
  • UTFE (encoding UTF-8 for the EBCDIC platforms)

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Uninstalling 11.1.2.2 EPM system

  Hi all
  
  While trying to uninstall EMP V11.1.2.2, the screen is blocked at ' initializing... treatment of the audit entries "for more than 45 min.
  After losing my patience, I cancelled the uninstall and uninstalled manually.
  
  How much time must uninstall take and what are the critical control points?
  
  Thanks in advance,
  TEJ

  Have a read of "uninstall EMP Web Components 11.1.2.x crashes with the Message"initializing..." "Treatment of the audit entries" [ID 1528898.1].

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Error in the register EPM system in the validation report generated

  I installed and configured EMP 122 and I used the IgnoreChecks command - validate.bat subsequently to validate installation and configuration but I see some errors in the report generated in red color
  I see that as a result of errors in the validation report generated
  
  REG failed: next register numbers are:
  PUBLISHER_WEBAPP (id: 11b68432ce38a71bS10ba34fd13ed1f99950S7f56):
  property 'serverName' failed
  property 'validationContext' failed
  Failed 'APP_SERVER' child
  
  BIEE_WEBAPP (id: 11b68432ce38a71bS10ba34fd13ed1f99950S7f49):
  property 'serverName' failed
  property 'validationContext' failed
  Failed 'APP_SERVER' child
  Error: Failed to execute of Checker.
  Recommended action: check the logs of validation for exception details.

  I'll ask again :), have not selected the "Connection to Oracle BI and editor Configuration" option in the Setup program at any time? I thought just maybe you configured and that you didn't need to, and that's why the configuration is captured by the validation.

  See you soon

  John
  http://John-Goodwin.blogspot.com/