ePower tray stopped working

Similar Questions

• LaserJet CP1025 ns: HP sytem tray stopped working

  As soon as I turn on the printer, and he finished his process of starting, I get a message that "HP system status bar stopped working.  The printer seems to print fine, despite everything. However, I had a problem with the tasks of a new cartridge and tried to run the clean program Page and discovered that the icon of the device setting is not in the Windows system tray, and so I could not access the Page clean process. So I was wondering what else could be missing its shot upward.

  I reloaded the driver. HP system tray works more or never start.

  I followed a thread that suggests to disable the bidirectional printing setting, but none of the directions did what I saw in the properties of the printer.

  Someone at - it suggestions?

  Hi @JR-37 ,.

  I see that you get an error message for the "HP sytem tray stopped working. I will definitely do my best to help you.

  Try the following steps to see if it will solve the problem.

  Uninstall the software. Printing software uninstalled.

  Download and install the latest version of Adobe flash player.  Adobe Flash Player Support Center.

  Install the base driver. Base driver HP LaserJet CP1025.

  Update the firmware of the printer. Firmware Update utility from HP LaserJet Pro CP1025nw color printer.

  If you need help, let me know.

  Good day!
  Thank you.

• DeskTopAgent tray stopped working error and dell logo appearing at startup

  Original title: DeskTopAgent tray has stopped working ERROR... and

  Vista Edition, Windows Home Premium, 64-bit

  In addition, due to several problems I reinstalled... a week ago.
  Note that I'm always get Dell logo when connecting.
  Suspect that something is always LURKING & is not yet, the right with DeskTopAgent tray stopped working error message back.

  I'd greatly appreciate , helps in this moment I am at a loss and continue going in circles. This is the list of the turning points...
  1 DeskTopAgent tray ERROR -? Followed suggestions to turn off, and then select startup programs, several times.
  2. updates have been does not correctly, download so far at the moment that all are downloaded "successfully."
  3 IE-8 issues (resolved by switching to Firefox-love it!)
  4. issues with printer and Adobe driver (fixed and reloaded, so far)
  5. now, I'm not sure finished reinstall, with Dell logo, which appears at startup.

  Whenever I try to solve a problem, the same questions keep circling around.

  Thank you.

  Hi Bonita,
   
  To resolve the error DeskTopAgent tray, follow these steps.
    
  Step 1:
   
  Desk tray Agent"If you look closely at the error, it will say something about agent touchpoint qwest. Qwest touchpoint agent is like the update of the installer of qwest. Just Uninstall setup of qwest "programs and features" and you should be good to go.
  Step 2:

   

  Put your computer in a clean boot State, and uncheck the 'plateau of office agent.

   

  Note: Follow step 7 to your computer as usual.
   
  As dell appearing at Startup logo is concerned, it's either by default when you open a session as long as you may be using a computer dell laptop or a desktop computer or you might disable it by launching The System Configuration utility .
   
  Note: D o don't forget to restart the computer as usual.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• LaserJet CP1025 Color - PC system tray stops working whenever I have send a doc to the printer.

  LaserJet CP1025 colour connected via direct USB for WINDOWS Vista 32-bit. I have the latest drivers, applications, and firmware for the printer, but the system tray stops working whenever I print a document. I tried this on Windows 7 via USB and get the same problem. Why does this happen?  I have another printer connected to the PC and I deleted all other HP drivers so that they don't interfere with the laserjet.

  Thanks for the update. I also found another thread where a lot of troubleshooting has been done, but the problem persists or is fixed only to reproduce:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/LaserJet-CP1025nw-HP-system-tray-has-stopped-working/TD-p/1226639

  I noticed it happens on XP, Vista and 7. I recommend updating the firmware first (if you have not done so) by going here:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=LJ-86491-5&CC=US&DLC=en&LC=en&os=4062&Product=4052957&sw_lang=

  In addition, in the printer preferences, disable bidirectional printing, which is located by clicking right on pinter > choose Print Properties > click on the ports tab > uncheck bidirectional printing.

  Let me know if either of those who help.

• When you perform a backup of Vista on a flash drive, receive the message "set start stopped working.

  When I try to back up using a flash drive, messages appear - Starter tray stopped working, and windows has recovered from an unexpected shutdown, a problem due to windows to stop working correctly.

  Try these:

  http://www.winvistatips.com/tray-Starter-has-stopped-working-t136221.html

  http://forums.techarena.in/Windows-Vista-performance/801556.htm

• Satellite L300-1AQ - Bluetooth tray application has stopped working

  When I put my laptop it comes up with an error that says:

  * bluetooth tray application has stopped working *.

  A problem has caused the problem to stop working correctly.
  Windows will close the program and notify you if a solution is available.

  Anyone who has a solution?

  The laptop is a Satellite L300 - 1AQ
  Didn't it monthly!

  Please help, thanks

  XX

  Hello

  Have you tried to reinstall the battery Toshiba BT?

  Usually, this will help you get rid of this error message.
  Here you can download the new BT stack:
  http://APS2.toshiba-tro.de/Bluetooth/

  First remove the old BT of the system software and after restarting again install the BT downloaded from the Toshiba BT page.

  Good bye

• Desk tray Agent has stopped working.

  My desktop tray agent has stopped working and he wants that I either debug or close the program. No icons on my desktop does not work once the sign appears.

  Additional...

  Go to programs and features, or add, delete, application > scroll down and find qwest touchpoint agent > uninstall it.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Why the task tray Menu ConfigFree has stopped working

  Why the task tray Menu ConfigFree has stopped working and how can I fix it

  ConfigFree is a program of Toshiba.  You should ask Toshiba.  Generally you can start it via the start menu if (Start-> Toshiba).

  I hope this helps.  Good luck.

• System tray CP1025nw HP LaserJet has stopped working

  I bought this printer about a month ago and a week ago I started having error

  "HPCP1020SM.exe (64-bit) has stopped working." then click on close and then

  "HP system status bar stopped working." appears click Close. the printer will always print but these mistakes continue to flock to the top whenever I print.  I called HP support, but they have no idea.  Thank you for anyone who can help.

  Hi leutzu_mik,

  Follow the steps below to uninstall and reinstall the printer. If you are unable to get the printer installed on this computer to try to install on another computer and let me know if you encounter the same problems?

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Laserjet CP1025 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the basic driver, and then reinstall the printer.

  HP LaserJet Basic driver

• HP Officejet Pro 8600 Plus: fit to Page has stopped working

  Adjust the Page setting has stopped working, but the printer will expand again manually.

  Copy - settings - resize - adjust α Page stopped working. It allows me to always select the setting, but when I push copy the copy is not expanded.

  Copy - settings - resize - Custom still works, but it takes forever to grow something because you have to keep hitting the top or down arrows (you must press the arrow pointing upwards, 100 times to set the printer to enlarge it 200% copying.

  I use Fit daily page in my work, but it stopped working about 2 weeks ago and I need to get back to work.

  I always put it to adjust to Page when I copy and sometimes it will work, but 95%, it prints the copy without enlargement.

  How can I fix?

  Hey @WG2,

  Thanks for getting back to me on this subject. It's honestly the first time I heard about brands of pen on the printer tray, creating a conflict for the adjustment to the copy of the Page in white feature. I will definitely keep in mind for the future.

  Regarding the cleaning, the pen delimits the white mile tree windows is supported. Don't use of cleaners containing abrasives, acetone, benzene, or carbon tetrachloride. These substances can damage the printer. Avoid alcohol isopropyl (rubbing alcohol) because it can leave scratches on the glass.

  -Source

  If you use a mild cleaner still does not work remove pen marks, I recommend you contact our Technical Support by phone queue to explore additional options. The Platinum is a non-replaceable part, so if it cannot be cleaned the whole unit replacement may be necessary.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  I wish you good luck going forward with this!

• Startup error message: "Microsoft Mobile PC presentation adaptability Client has stopped working".

  I recently tried to install SP2 to Vista, but it failed. I tried all the resolutions posted, but it is not always correct it. Later, I started my Vista (automatically restored to SP1) and it came with a mistake, "Microsoft Mobile PC presentation adaptability Client has stopped working". I tried searching on the net for similar problems, but I could not find any solution. He comes back every time you start, after that the background, shortcuts and the system tray loaded. This error started showing when I tried to install SP2, but he failed and returned to changes. I think that something could have gone wrong and that's why it shows this message.   Today I tried the system restore to the restore point JUST before I tried to install SP2, but it ALSO failed and brought me back to the State.
  I'm not sure if it's related, but I'm also no longer be able to use Windows Media Center, as every time I start it I immediately receive the error message "Media Center has stopped working".
  My computer:
  Gateway M6842B laptop
  Version of Windows Vista SP1 32-bit
  Intel Core 2 CPU
  T5300 @1. 73 GHZ 1.73 GHZ
  2.00 GB OF RAM

  Hi zensurferboi,
   
  First, we will check if we get error safe mode, start the computer in Safe Mode reboot and press the F8 key for about four to five times. You'll see the Mode without failure listed in the advanced window options, select Safe Mode, and then press ENTER.
   
  Check if the error mode without failure.
   
  If the startup error message does not appear safe mode, I recommend you to place the computer in a clean boot state, and check if the problem occurs in a clean boot state.
   
  To put the computer in a clean boot state, follow these steps:
   
  Perform a clean boot
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  a. log in the computer using an account with administrator rights.
   
  b. click Start , type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
   
  c. under the general tab, click Selective startup, and then clear the Load Startup items check box.
  (The box use the Boot file is not available.)
   
  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  e. click OK, and then click restart.
   
  Once the computer restarts, check if you get the error of starting.
   
  Reset the computer to start as usual
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , type msconfig.exe in the Start Search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. On the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  If you don't receive the start-up error message after placing the computer in a clean boot state, follow the steps below in the link to diagnose the program or service that is causing the problem:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista
   
  http://support.Microsoft.com/kb/929135
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• My speakers stopped working.

  Original title: speakers - sound

  My speakers have stopped working... they are set at 100%...

  Hello

  1. what operating system is installed on the computer?

  2 have you made any changes to the computer before the show?

   

  Method 1:  Do the speakers as the default audio output device and see if that helps.

  (a) right click on the speaker icon on the tray (taskbar)

  (b) click on playback devices

  (c) directly on a free space in the playback devices and check Show disabled devices.

  (d) stress involved and make this default audio output device using the menu drop-down set as default.

  (e) click on apply and Ok.

   

  Method 2: Run the fix - it of the article mentioned below:

  Diagnose and automatically fix the audio problems and audio playback:

   

   

  Method 3: Uninstall and reinstall drivers audio adapter.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) develop its video and game controllers, right click on the wireless adapter option

  (d) click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

• My keyboard for my Acer aspire switch 10 has completely stopped working

  I use my Acer 10 for about six months and had improved to win 10 just now with no problems.  This morning the keyboard stopped working.  I checked the Tablet contacts, clean them with a brush and a cleaning and not restarted, no chance.  The keyboard when it starts allows me to enter the PIN code and I have a USB mouse attached to the keyboard that works, but none of the keys work when I am connected to Windows. If the screen times out and I try to enter the PIN code again, nothing.   I can navigate around using the mouse, but not have the ability to enter information on keyboard.  I'm stumped and would apprecaite any suggestions welcome.  Acer has been great so far?

  I solved the problem!  It turns out it is 10 Windows that caused the problem.  Filter keys were turned on somehow and they disable the keyboard for users with disabilities. I discovered this on another machine when it happened too, but this time a unrecognized icon appeared in my system tray.  The icon has been for these filter keys and when I turned off their keyboard is back.  How this stupid thing got switched on I don't have a clue.  The original pc with the problem did not show a filter key icon in the system tray, so I was puzzled, did not know they existed.  Something for others to check if this is the case for them.  Thanks for your help.

• Top agent Office has stopped working.

  I have a drop to the bottom of the window that appears when I tried to load Microsoft Windows.  He says that desktopagenttray has stopped working.  I have the choice to start or continue.  I choose "debug", but he returned after my stop and restart.  What is it and the solution?

  Additional...

  Desk tray Agent is an application used by Qwest. If you do not need to do this, go to programs and features (or, Add and Remove) > locateInstaller of Qwest > uninstall it.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows Audio device Graph Isolation has stopped working and was closed.

  I am running Windows Vista Ultimate 32 bit. My volume on the system tray icon has an 'X' on it, and when I mouse over it it says "audio service does not work." When I right click on it, the open Volume mixer is grayed out and unclickable. When I get my audio settings / sounds an error pops up saying "Windows audio service is impossible. You want to allow it? "I click on Yes and then he said: 'Windows Audio Graph insulation has stopped working and was closed. »

  the error report is:

  Signature of the problem «»
  Problem event name: APPCRASH
  Application name: AUDIODG. EXE
  Application version: 6.0.6001.18000
  Application timestamp: 47919284
  Fault Module name: AUDIODG. EXE
  Fault Module Version: 6.0.6001.18000
  Timestamp of Module error: 47919284
  Exception code: c0000005
  Exception Offset: c 000070 0
  OS version: 6.0.6001.2.1.0.256.6
  Locale ID: 1033
  Information additional 1:3502
  More information 2: a465924573e02e7dbf28b31e7ea12c28
  Additional information 3: a4b
  Additional information 4: 91409072175cd5a219bdca7388005249

  Additional information about the problem
  Bucket ID: 932674242 "

  This is on a DELL XPS M1710
  I uninstalled the driver and reinstalled, uninstalled the device itself and not reinstalled, no change.

  No software installation seemed promt it.

  What are my options?

  deafinhum,
  If you run the utility from the Vista DVD System File Checker, it will extract the files it needs to turn off the DVD to replace those damaged.  If this does not work, you will need to do a repair of your Vista installation.

  Here is an article to help you with the repair process.  Please let us know if you need more assistance.

  http://support.Microsoft.com/kb/936212

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.