DeskTopAgent tray stopped working error and dell logo appearing at startup

Similar Questions

• I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  Hello

  Please see error: "License has stopped working". Windows or error: "License has stopped working". Mac OS depending on the operating system you have.

  Hope that helps!

  Kind regards

  Sheena

• ePower tray stopped working

  I just started getting the message error "ePower tray stopped working.  I tried to check for a solution online, but nothing helped.  How can I fix it?

  W8TTS,
  You use an Acer computer?  I think the ePower is an OEM (Acer) installed toolbar.  It can be used by a different OEM but I think it's Acer.  I could check with your OEM on this application and see if it can easily be reinstalled. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LaserJet CP1025 ns: HP sytem tray stopped working

  As soon as I turn on the printer, and he finished his process of starting, I get a message that "HP system status bar stopped working.  The printer seems to print fine, despite everything. However, I had a problem with the tasks of a new cartridge and tried to run the clean program Page and discovered that the icon of the device setting is not in the Windows system tray, and so I could not access the Page clean process. So I was wondering what else could be missing its shot upward.

  I reloaded the driver. HP system tray works more or never start.

  I followed a thread that suggests to disable the bidirectional printing setting, but none of the directions did what I saw in the properties of the printer.

  Someone at - it suggestions?

  Hi @JR-37 ,.

  I see that you get an error message for the "HP sytem tray stopped working. I will definitely do my best to help you.

  Try the following steps to see if it will solve the problem.

  Uninstall the software. Printing software uninstalled.

  Download and install the latest version of Adobe flash player.  Adobe Flash Player Support Center.

  Install the base driver. Base driver HP LaserJet CP1025.

  Update the firmware of the printer. Firmware Update utility from HP LaserJet Pro CP1025nw color printer.

  If you need help, let me know.

  Good day!
  Thank you.

• _ "Windows Explorer has stopped working" error - HELP Please! __

  I tried pretty much everything I can try in this thread, and nothing seems to work! It is very probably the the most annoying problem that I experienced with windows! I can open all the files and programs it is just that the 'Windows Explorer has stopped working"error appears literally every 5 to 15 seconds!  I click on cancel, and the other appears which says "Windows Explorer restarts" help please, I've never been more ready to give up on windows for good!

  Thank you, Bryan

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Toshiba Disc Creator has stopped working Error Message

  I have a Toshiba Satellite P305D-S8834 and tried to burn a CD using Toshiba Disc Creator v.2.0.1.3. But I kept getting an error message saying "Toshiba Disc Creator has stopped working." and could not properly burn a CD. Although I contacted Toshiba support, I couldn't not useful information. Advice would be appreciated.

  Try to remove and reinstall Disc Creator. Install the latest version from the Toshiba site.

  Also update the BIOS and make sure you use quality such as TDK DVD discs. Disks unnamed wear easy and use of dye at low cost.

  Also try to remove the UpperFilters and LowerFilters:
  http://support.Microsoft.com/default.aspx?ID=314060

• applephotostreams.exe has stopped working error message

  I get the following error message every time that I reboot - it started after MS Update on 23/08/2012:

  IN MICROSOFT WINDOWS BOX:

  applephotostreams.exe has stopped working error message - a problem caused blocking the program works correctly. Windows will close the program and notify yu if a solution is available

  This is a link to the solution I found that worked for me...

  applephotostreams stops working

• Once I turn on my dell inspiron laptop 1545 dell logo appears and then the screen goes black

  Let me start by saying: I had similar problems before, but none of the usual works.  The other day, these two Windows Update kept popping up and wouldn't go away so I clicked finally allow.  Then the next day that I was on the internet and my computer froze, I tried to turn it off and it wouldn't if I pressed the power button until it did.  Then when I turned it back after the dell logo appeared all that I had a black screen with a cursor in the upper left.  I ran diagnostics and startup repair and nothing.  I tried to do the restore of the system once in couple with different points and nothing, I still get the black screen after dell logo.  Is there another way outside the reinstallation of the operating system, to fix (because I really don't want to lose everything I have on my computer - and no I don't save it anywhere)?

  You can reinstall the OS without formatting the drive, all of your data in a folder named windows.old. You will need the Dell Windows Vista disc however.

  Follow my guide here: http://en.community.dell.com/support-forums/software-os/w/microsoft_os/1434.aspx
  Start with step 3. (require reinstalling Dell DVD). Skip step 5 continue on step 6 to step 7. Install Service Pack 1 and Service Pack 2 (autonomous probably 32-bit) and stand-alone Internet Explorer 9. You must download these in step 4 with the system drivers as described (probably, use another computer and use a USB drive). Install the drivers as mentioned system. Activation should be useless since you use the Dell DVD in a BIOs Dell. At the stage. 12 use the automated to retrieve documents from Windows.old. Make sure you have everything and then delete windows.old.

• WIN8 64bits - Recovery manager has stopped working error message

  Hello world. Just bought a computer laptop 1310sa m6 with envy. I tried to create a rescue disk set by using the Recovery Manager. It does not start, just gives the error message "Recovery Manager has stopped working." and then informs me that windows is collecting information and inform me a solution... Being that this machine is only 2 days is a bit much that parties do not work, in my opinion, one most important parts who! Has anyone encountered this and y at - it a solution?

  I tried to do a shadow with an O & O 7 disc image, works fine, but could not create a boot disk for a reason any (and Yes, I was using a 64-bit program!)

  Any help and advice would be accepted with gratitude

  JUST found the solution! DON'T bother with the HP Utility App Center. Go to search and type 'recover' and it will give you the option to create rescue disks... And it worked on my computer without any error message

• LaserJet CP1025 Color - PC system tray stops working whenever I have send a doc to the printer.

  LaserJet CP1025 colour connected via direct USB for WINDOWS Vista 32-bit. I have the latest drivers, applications, and firmware for the printer, but the system tray stops working whenever I print a document. I tried this on Windows 7 via USB and get the same problem. Why does this happen?  I have another printer connected to the PC and I deleted all other HP drivers so that they don't interfere with the laserjet.

  Thanks for the update. I also found another thread where a lot of troubleshooting has been done, but the problem persists or is fixed only to reproduce:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/LaserJet-CP1025nw-HP-system-tray-has-stopped-working/TD-p/1226639

  I noticed it happens on XP, Vista and 7. I recommend updating the firmware first (if you have not done so) by going here:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=LJ-86491-5&CC=US&DLC=en&LC=en&os=4062&Product=4052957&sw_lang=

  In addition, in the printer preferences, disable bidirectional printing, which is located by clicking right on pinter > choose Print Properties > click on the ports tab > uncheck bidirectional printing.

  Let me know if either of those who help.

• Compaq Presario CQ62: HP WARRANTY CHECKER STOP WORKING error

  I received an other BOUNCING error message almost every 5 minutes and is annoying me 'HP WARRATY CHECKER stop working. Looking for Windows for a fix"or something. What is the cause. In addition, the error next message of the HP "HPCEMENT stop working. to find a solution to Windows.

  I wonder if this is also related to a corrupted AUDIOSES > whch DLL I also work to find a solution. It seems that my audio drivers, dll had been compromised.at leat that's what I get as error message and no malicious softwatre tool, CHKDSK and sfc /scan can fix it. What can I do on the HP WARRANTY CHECKER STOP WORKING error message?

  Thank you.

  Bailen2vc

  Hello

  Try the following

  Firstly, uninstall your current version of HP Support Assistant by opening windows control panel, open programs and features, make the entry for HP Support Assistant right click and select uninstall.  Once this process is complete, restart the laptop.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the laptop.

  Also find the link given below might help you.

  http://support.HP.com/us-en/product/HP-G62-notebook-PC-series/4156509/model/4226731/document/c02604915

• Dreamweaver CS4: "license for this product has stopped working": error 6

  I'm working in Dreamweaver CS4. Suddenly, I'm unable to use the program at all. Windows 7 is the operating system.

  It opens and the load, however a white box is displayed indicating that "licensing for this product has stopped working" error 6. Then the program automatically stops.

  I have a valid version of DW CS4 which I have used for years. The original DVD is here with a valid serial number always on the case.

  Already I ran the "Adobe licensing repair tool: nothing helps.» I followed the procedures outlined tool until the 4th and final stage - nothing.

  I need to access this program as soon as POSSIBLE because I need to update a Web site with it. Time is crucial.

  Can someone please help?   Thank you.

  Error: "License has stopped working". Windows

  Error "licensing for this product has expired" | CS4, CS5

  Nancy O.

• Adobe Photoshop Lightroom has stopped working error

  Updated to the latest version of CC - everything worked as expected for a couple of days - earlier this afternoon LR began (and continues) to plant. "Adobe Photoshop Lightroom has stopped working" error - I followed different bits of support instructions - uninstall - reinstall - signature and return - downloaded and committed "Adobe Creative Suite Cleaner Tool" - now, a few hours later, the problem has not been resolved - I need to go back to my project. Unfortunately, I even followed the thread that requested to uninstall the previous 5.7.1 version.

  Please help asap - Kassa cordially

  You don't did us not all the details to help you.

  Just out of curiosity, what happens if you disable GPU usage in the 'performance' of the Preferences dialog box tab?

• Hello, my copy of Dreamweaver CS4 stopped working, a message appears indicating "license for this product has stopped working" error 150:30

  Hello, my copy of Dreamweaver CS4 stopped working, a message appears indicating "license for this product has stopped working" error 150:30. I have a license I bought from Adobe directly, and which has always worked well. Any tips?

  I have a new iMac, retina 5K, 27 inches. end of 2014 with a 4 GHz Intel Core i7, 32 GB memory DDR3, Mac OS Yosemite

  I contacted Adobe support, it seems lie that serial number has not worked because I have chosen English instead of English Intermational! Thanks again for the quick response. Concerning

• Adobe first Pro CC 2014.2 has stopped working error

  Hello guys,.

  Recently, I built a new computer with the following specifications:

  CPU: 4790 k (stock speed)

  RAM: Team Extreem 16 GB (2 x 8) (2400 mhz)

  Motherboard: Asus Ranger 7

  GPU: 780ti Zotac Amp Edition

  Storage: 250SSD Samsung evo + Barracuda 1 TB

  PSU: 850 G2 EVGA

  Operating system: Windows 7 Professional

  All the drivers are up to date.

  So I installed the creative cloud and then to install the applications in the following order: Media Encoder, Photoshop, and first Pro CC. The media and photoshop have no problem but first CC pro crashes when you click on.

  I would click on the first button CC pro and the loading screen pro first will pop up but then her 'has stopped working error' will occur immediately.

  I need to get this problem is resolved in the next few days because I need it for a very important video project. If this problem cannot be fixed in the next 2 days, unfortunately, I have to pay my subscription with adobe (still within 28 days) and use Cyberlink or Vegas.

  I have tried searching the forums and google but you have not found a solution that works for me. Could someone please lend a hand?

  Thanks for posting a screenshot of the Windows system information dialog box: StartMenu > Control Panel > system. (You can scramble all remove the computer, by domain name and workgroup down settings).

  A common cause of accidents involving the ImageRenderer.dll is not have Service Pack 1 installed for Windows 7.