ePrint / DJ1510: correct UBS cord?

Similar Questions

• OfficeJet 8720: Officejet HP 8720 (D9L19A): power cord issue & legality in the United Kingdom

  Hello

  As a society, we standardize more than 150 sites on the new printer HP Officejet Pro 8720.

  We ordered about 8 at our dealer online recently (Softcat) and each arrived with a European power cord 2 pin and not a power cord 3 pins of the UK.

  This causes significant confusion for our end users, and I think that it is illegal to even provide goods in the EU without the correct national power cord.

  Our retailer say that HP have armed upward and shipped loads of these 8720's without the correct power cords. It seems that a mass surveillance on HP is illegal and a part too? How can this happen?

  Surely all stock the 8720's should be limited to the British market and fixed with the right power cord?

  I have not reported this Exchange Standard yet, but I want to just get an idea of what's going on?

  Thank you

  H

  @HKCHG

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
  
  
  
  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
  
  Thank you for visiting the Forum from HP Support.

• OfficeJet 8600 more: power cord with adapter for Officejet 8600 set more lost

  Lost my power cord complete with adapter. Can I use a power cord generic Office Depot, without the 'square' on the wire? Or is it necessary to have the power cord with the adapter, as it was originally? It will damage my 8600 more to use a power cord without this "square" in the annex on my more than 8600 all-in-One? Thank you.

  Hello @DB2,

  I understand that you have lost the power cord for your HP Officejet Pro 8600 more e-all-in-one printer and you want to replace it. I would like to help you to solve this problem today. The HP Officejet 8600 more only comes with a power cord. The adapter is built into the back of your printer. You have to unscrew the back of your machine in order to access it. Therefore, if you buy a spare power cord it should work perfectly for you.

  The power requirements for this machine are:

  • Power: Universal power adapter (external)
  • Power consumption: Input voltage: 100 to 240 VAC (± 10%), 50/60 Hz (± 3 Hz)

  Output voltage: + 32V / + 12V to 1095 mA/170 my

  • Consumption: 30 watt impression (project Quick Mode); 32 watts copy (Fast draft Mode)

  -Source

  You can buy a power cable of the store to use with your printer, or you can contact our Technical Support queue and buy the correct power cord for your printer by phone.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Please let me know if this information solves your problem. Thanks for joining the Forums from HP Support. I look forward to hear from you!

• Apple TV from the Canada to the Australia, going to work?

  We are moving Canada towards the Australia later this year and don't know what to do with the Apple TV. If take us him with us, which is great, will it work? I don't know if there is any sort of compatibility issues. I am aware of the voltage variation which I have, but not sure about all the problems with Aussie TV or such. Help, please.

  It'll work. Voltage is not a problem, need to correct spare cord or plug adapter.

  ATV has enough things to manage Aussie TV. Leave all automatic fix to avoid possible without image problems. Photo may be in reverse, but

  You will need a new Apple ID that there. You must clear all the settings from the ATV and reconfigure the new location.

  You will lose access to old purchases. They are really hard to port in all regions.

  Pretty major gesture. Exciting.

• How we charge my new iPhone, 6s, happened yesterday?

  My new iPhone 6 s arrived yesterday.  I have the cords included with the phone, but I can't find a place to put the small end into the iPhone.  I have my iPhone in an Otterbox Defender case, but I don't think the holes are covered.  None of the ends of the supplied cord fits into the holes, that I can see.  I also have an Apple AirPort Express and a dock of the lightning. My phone is dying, and I don't know how to revive without the correct power cord. RRR

  Recharge your iPhone, iPad and iPod touch - Apple Support

• HP Phoenix 810 810qe i7 - 4790K

  Please tell me:

  I get such a PC of the USA

  Is it possible to use the 220V power supply (in the USA you have 110V)

  It is written on the label of the power supply, 100-220V

  But I would be sure that it ok to 220V Europe

  Thank you

  Hello

  Feeding is automatic voltage detection. Just be sure to have the correct power cord.

  Thanks for posting on the forum.

• Crush: What plug USB cable only shows my card sandisk (crush CWC9 #AUU080E)

  When I plug the UBS cord only what is on my disk scan card appears. I was told that what is in the memory of the phone is supposed to appear. I just got the phone and had to run a top repair to install I'm assuming was a lay-off day and then it worked. Then, I had to send it back to Motorola for a software update and plugged the cord and shown again only the scan disk card. I tried to start the diagnosis, but it wouldn't work. Thanks for any help. I'm with cell we and the day 30 back just missed so cannot take it back.

  You have a PC of 32-bit or a 64-bit PC... that is only what you need

• power supply beeps and does not charge since located in a country where the average temperature of 38 ° c

  Since I started so that connected beep 3 months in Nicaragua (this voltage converter) my Compaq Presario CQ61 Notebook power and charge more.

  When you're disconnected beeps constantly.

  Is it possible that the problem is solved when the power supply cools at an ideal temperature or you hear a beep that it will be necessary to get a new charger?

  Thanks for your replies!

  The temperature is unlikely to be the cause of the problem.

  The power adapter (sometimes called power brick) is designed to operate in a wide range of voltages (from 100-120 Volts AC) or 220 - 240 Volts AC) the only thing that differs is the type of power connector used to connect the power adapter to a wall outlet of the home or office.

  Remove the converter and use the correct power cord or travel adapter Nicaraugua. Your adapter will not explode or be damaged. Converter is likely to be the issue.

  You need a North American power cord to the adapter. You should be able to buy one on site or just go into a travel store and buy a travel adapter set. That's what I have for when I travel to the United States for business or travel.  I bought my Brookstone set for about $30.00 USD.

• HP Photosmart 5520 series: what ports app to print Basic or advanced within the router?

  It is common for wireless printing open certain application ports in the firewall NAT to router for wireless communications is working properly?

  This was not mentioned during the installion of software, but I found out about it after searching the site of HP support on WiFi printing problems.

  I discovered that my router is blocking traffic on the TCP/UDP #4129 port (id: nuauth) and therefore refused all the print jobs AND ePrint work correctly... ?

  In addition, I needed to add rules for TCP/UDP ports to 9100 and 9220...
  I guess the 9100 (hp-pdl-datastr) is necessary for real communication?

  My router is a Ubee EVW321B.

  Nice interface easy to use, but maybe a bit more protection... ?

  I would like to read if other users did assign certain ports for the 5522 PS works fine on a WiFi connection?

  The here document contains information on port settings for the printer Photosmart 5520.  Your router is not, but he suggested the following for unlisted cases:

  1. If your firewall software is not listed in the table, manually unlock the ports used by the printer.

• White white screen on Dell Inspiron 15 - N5030

  Hello world

  I am trying to solve this problem with my wife's cell phone and its really frustrating. His Dell Inspiron N5030 and it's just more than a year. Unfortunately the 1 year warranty expired and this problem started to arrive in 2-3 months. The problem is, when you start the laptop, it has a complete blank white screen. I read quite a number of messages autour and many have suggested that it is usually a video cable connection, or a bad video cable of the lcd screen or a problem with the motherboard. I will explain the steps that I've done so far and I hope someone here can guide me on what I can do next to fix this.

  First of all, when this problem started happening, it was very unpredictable. Which means that, sometimes, the laptop starts fine but sometimes white screen appears. But as the weeks went by, the white screen begins to appear more frequently, and now it appears all the time. That's what I found so far:

  (1) when you connect an external monitor, the external monitor works fine. The strange thing is, sometimes when I connect the external monitor, disappears from the white screen of the laptop and the screen lcd laptop starts to work again. I got this as a workaround for some time. Whenever the white screen appears, I connect the external monitor and remove it when the screen of the laptop working again. But eventually it stopped working as well.

  (2) when the white screen started coming all the time, I noticed that the problem goes away when I remove the outer cover of the screen. (the black frame around the screen that can be removed by pulling the top of the screen).

  (3) last week, I removed the LCD and taken apart to see if there was any loose connection at the back. I noticed there is no loose connection and the inverter was very good as well. However, I noticed that the black (video cable) cord that connects the back of the lcd screen to the motherboard was sorta stuck around the hinge area. I corrected this cord so its properly seated and made sure that the outside frame does not grow this rope to the hinge when I set everything again. When I did this, the laptop started to work very well for next week without problem but now the white screen started to reappear!

  So, based on what I've seen, I think that the cord is blocked around the hinge and therefore to cause this problem. But I'm not a techinical person and don't know if its correct. It's just a guess... So I don't know what I'm doing then? This means that the video cable is drunk or is just blocking on the hinge at the origin of this problem? What I need to change the complete lcd video cable or is there another solution by moving this cord away from the hinge to fix this from happening? What I try next?

  I appreciate all help and thank you for taking the time to read my post.

  Hello world

  Here's an update on the solution of this problem with screens white white. I finally fixed it, and this time I know for sure that this problem is definitely solved.

  First of all many thanks to "randypittes" for first of all the solution and share with all the world. Much obliged!

  After setting up with this problem white screen for several months, I finally bought the "LCD video cable" on ebay and he succeeded. Its been 2 weeks now that I changed the cable and the problem re does not! I wanted to give him two weeks first and see if the problem comes back again until I jump into conclusion and now that my laptop works perfectly again, I know for a fact that this problem is probably resolved.

  So, those of you experience the same problem, do the same thing. First of all start by replacing the LCD video cable and this should fix the white screen issue. He me $20 encrypted only on ebay (including delivery in sydney) and it is a much cheaper option than to try to replace the screen itself. If this does not work for you, then you can look into other options. But I would say, this solution should solve most of the white screen issues you may encounter.

  Here is a guide that I put in place about how I went to change my video cable in my laptop. I don't know that it can be useful to other beginners like me:

  Step 1: first of all, make sure that first download you the manual of your laptop. Google simply your laptop model and you should be able to find the manual for it on how to replace its parts, etc... It's really convenient when getting started.

  Step 2: Check out this video on how to remove the screws around the LCD and how to get to the video cord to the back of the LCD:

  cs_setInnerHtml ('video_8efdced1-828d-4463-b632-022776eb4f65', ");

  Step 3: Check the downloaded Reference Dell manual and see how to remove the screws on the laptop base and how to remove the:

  (a) is based

  (b) keyboard.

  Step 4: once you remove the palmrest and keyboard access to the motherboard with the video cable is connected.

  Step 5: Replace the cable and reassemble everything to the way it was.

  It's her! And good luck to all! You need... :-)

  without a doubt

• Laptop Inspiron N 5010

  Indicator lights located on the front corner L of Inspiron Laptop N5010 - L light solid white, sometimes white flashed Center flashlight, flashing orange light R.  What does the light orange? Battery will not charge. What is the correct power cord to buy? A retailer of replaced repair cord of origin with another type of power cord from Dell when they lost mine. Thanks for the help. Robin

  Hello

  Download the manual for your model to find the meaning of colors for lighting, etc..

  http://www.Dell.com/support/home/us/en/04/product-support/product/Inspiron-15-Intel-N5010/drivers

  And if this does not resolve your problem, please contact Dell:

  http://www.Dell.com/support/contents/us/en/19/category/contact-information

  Or you could ask their Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• How can I get the ePrint android app to print on the correct printer?

  My home network is a HP OfficeJet Pro 8500 A909 connected to the network wired (not wireless), and which is NOT active ePrint (I understand it does not support ePrint).

  The network also has a HP OfficeJet 7500 has yet once connected to the network by wire (not wireless) and what ePrint IS activated.

  Both printers are on my network 192.168.1.x behind a router, but not a proxy with separate IP addresses.

  If I send a print by the 7500 ePrint a email address, he goes out on the printer correct (7500).

  But If I print using the HP ePrint home & Biz Android app that shows to the 7500 a print out immediately on the 8500 - the incorrect printer. The app shows the type of printer as 8500, although she still bears the name of 7500 a correct.

  So I have 3 questions:

  1. How could I get the ePrint initiated by app printed to reach the 7500 a?

  I like the idea that it is possible to reach the 8500 and 7500 a remotely (when I discovered ePrint after buying the 7500 a I checked if the 8500 supported that to find it does not work). But, if I wanted to keep accidental remote printing to the 8500 then...

  1. How can I print on the 8500 email? (Remember, emailed still prints go to the 7500).
  2. How can I add the 7500 a the ePrint application so that I can print to the 7500 a still without disturbing the current app ePrint printer that prints to the 8500?

  Thanks for the tips you may have.

  Kevin

  Hi, I would like to try and answer your questions to the best of my ability:

  1. How could I get the ePrint initiated by app printed to reach the 7500 a?

  With the printed file you want displayed in the app, you must see the details of the printer at the bottom of the screen on your device. If the printer you want to print to is not presented, you can press the arrow to the right of the name of the printer and then select the printer at the top of the next screen. It will automatically search and find printers available on your network. Choose the printer you wish to print and it will update the printer selected at the time of printing. I've included a few screen shots of what it will look like

  

  1. How can I print on the 8500 email? (Remember, emailed still prints go to the 7500).

  Unfortunately, it is not possible to print on the 8500 email. The printer must have the ability of ePrint in order to be able to do this.

  1. How can I add the 7500 a the ePrint application so that I can print to the 7500 a still without disturbing the current app ePrint printer that prints to the 8500?

  See the answer to the first question

  If this does not solve your problem you can try to install the HP Home Network Diagnostic Utility tool to check that nothing is wrong with your network printers

• 7520 cord connected to the correct port has no

  Hello. Today, I installed my new hp 7520 and I get a message that failed

  (The phone cord is connected to the port labeled "2 - ext" on the back of your hp device, when you run fax test.

  I have Windows xp, using cord hp sent with printer and plugged into the correct port. Can you help me? Thank you.

  Hello. Thanks for your quick response. I tried the hard reset and not lucky I haven't tried another cord, no luck.  The cord is the same cord that I used with my last hp device.  I have not had any problems with the fax on the last machine. I had a person of the audit of Department of telecommunications line and it works. I don't know much on the lines of phone/purse strings, but the old cord is a 4 son who has a two sons converter this have something to do with it?  I get a fax machine connected to the active telephone wall jack, but it still does not work on the correct port.  Any other ideas? Thank you.

• How can I add my yahoo account to the HP eprint app? Also it does not find my printer how to correct this?

  I downloaded the HP eprint service app to my iPhone 3GS but I can't add my yahoo email address - what is IMAP configuration?

  I tried to print something just to see if it would work, but it does not find my printer HP photosmart series B110a

  Any ideas anyone?

  The HP ePrint Service app is not intended to be a consumer product.

  It will offer you the possibility to print the location public ePrint printers...

  The application provides the required functionality is the app available HP ePrint home & Biz, on the app store of Apple.

• eprinting impossible if printer standby

  Printer (HP Deskjet 3520) is connected to the network, but users cannot access if the computer is not turned on. Thanks for your help.

  Hey Otterlou,

  Sorry to hear that you still have problems printing directly to the e-mail address you have set up.

  If the printer is on the network, it is able to connect to the ePrint service? If you have registered your printer to ePrintCenter, sign in to your account to see detailed information about the print jobs and errors and display the status of the connection:

  
  

  • Connected means that the printer is on a network with an Internet connection active and able to communicate with the HP servers.
  
  
  • Not connected means that the printer is not on a network with an active Internet connection.

  To update the connection status of your printer on ePrintCenter, use the button refresh, under the name of your printer on the site. Do not use your refresh button of the browser, because that will not regenerate reliable connection status of your printer.

  Note: If you use a USB cable to connect your printer to your computer, you also need to connect the printer to the Internet to use ePrint. HP ePrint requires an active network connection to the printer. HP Web Services are temporarily unavailable , we hear that the HP servers are not available.

  In some cases the following may be required for ePrint address connectivity issues:

  Simple corrections - first try these easy steps:

  
  

  1. Turn wireless off and then on again (under configuration > wireless menu on most printers)
  
  
  2. Turn the printer power off and then back on
  
  
  3. Make sure you have an active Internet connection. You can refer to "Connect to the Network," (in the ePrint > ePrint troubleshooting section) or "Print apps won't launch" (in printing applications > Troubleshooting Print Apps section)
  
  
  4. Turn your router off then on again (most routers do not have a power switch, so simply unplug the power cord at the back of the router and then plug it in again.) It may take a few minutes for the router power on and reconnect to your network).
     
     1. While your router is shutdown/reboot/reconnect, you will lose Internet connectivity Wi - Fi and wired connections to your computers. Close all the files that are stored on hard drives on a network before you reboot the router.

  
  

  Confirm that your printer and your router to update firmware:

  
  

  1. Check updates for your device:
     
     1. Depending on your model, look for the updates using one of the following options on your device: 1) select the ePrint icon/button > check [Product] updated; (2) configuration > Preferences > product updates; (3) configuration > Web Services Configuration > product updates; or (4) settings > tools > updates
     
     
     2. In some cases, the unit may require reboot a second time after an update of product to reconnect. If you experience connection problems after an update that is not resolved by a reboot of your printer, delete and re - enable Web Services.
  
  
  2. Look for the firmware for your router updates
     
     1. Check your router help documents or the Web site of the manufacturer of your router for more information on how to find and apply the available firmware updates.

  
  

  The problems of connectivity to Web Services:

  
  

  1. Delete and then reactivate Web Services on your printer
     
     1. This delete your printer from your ePrintcenter account and give you a new email address/request code for your printer. (The code that is the part of your printer to the left of the sign e-mail address @.) You can then add your printer to your ePrintCenter account and complete any installation of App ePrint/Print.
  
  
  2. Restore the default settings on your device. Follow these steps on your device:
     
     1. Delete Web Services
  
  
• Restore the default settings (this is usually found under Setup > Tools menu)


• Initial re-do of your device and add it to your network


• Re-enable Web Services


• Once the Web Services information sheet printing, use the printer claiming the code to add your printer to your account on ePrintCenter.

I got this information under the tab helps in troubleshooting of ePrint www.eprintcenter.com

Please let me know if you need more assistance,

Thank you