EPUB TOC not as expected when you use items?

Similar Questions

• URGENT... BUG in scrolling doesn't work not as expected when you use the navigation

  Hello

  I created this site for a client. He was literally works fine an hour ago. I just went to the post, and now when I use navigation, all my images, go to the left, even though I put them to fill.

  What could possibly get there? I'm supposed to show them this site tomorrow and now I can't. If you have any ideas, let me know.

  NOTE that this only happens when I use navigation. If I scroll it works. It is, however, very nervous.

  Home

  and here is the file:

  Dropbox - MicrositeRedesign02.zip

  Thank you

  Dave

  This behavior is caused by the white dots on the right side of the page master, forcing the content area (and thus the scroll in the browser area) is much wider than what you want.

  

• Taskbar of Windows 7 is not pop up when you use Google Chrome or iTunes

  Chrome version: 18.0.1025.58 beta-m iTunes Version: 10.5.3
  Other readers of browsers / multimedia tested: 5:OK Safari Firefox 5: OK IE 9: Windows Media Player 12 OK: OK Quicktime 7: OK problem?: Taskbar hide automatically, the value does not appear when you use Google Chrome or Apple iTunes what is the expected result? The taskbar will rise, allowing you to use your other windows what is happening instead? It remains hidden, forcing me to press the Windows key to open it additional information: iTunes has done this for a while, Chrome of the noticed the other day. My Windows IS personalized (Windows logon background start Orb has changed.) Also twisted with Ultimate Windows Tweaker Windows Version: Windows 7 Home Premium x 64 material: HP Pavilion dv6-600 4 GB RAM 500 GB HDD Intel i5 @ 2267 MHz (2.7 GHz) processor
  
  

  Hello

  Were there any changes made recently to the computer?

  Try the following steps.

  Method.

  Step 1

  The Advanced Boot Options menu lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts. You must start the computer in safe mode with networking and then check out.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2

  Put your computer in a clean boot state and then check

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to your computer as usual.

  Hope this helps

• I get the message "files for the recovery diskette could not be created" when you use the backup utility. Why?

  I was using the Backup Wizard, backup all info on the computer to an external hard drive and insert a diskette in the drive.

  Hello

  · What is the edition of windows that you have installed?

  · What is the service pack installed?

  Try the steps listed in the link below: year Error Message is displayed when you try to use the Automated System Recovery Wizard: http://support.microsoft.com/kb/302700

• Why do the mouseout/mouseouthandler() and mouseOver not work correctly when you use a dynamic textfield?

  Hello
  
  I made a movieclip with instance name: cs_btn
  
  Inside of that movieclip, I have two layers. Bottom and top button dynamic textfield.
  In this scenario, I have a 'more' 'out' 'down' and 'up' labels image.
  
  It works fine, but when I use a dynamic textfield, the passage of the mouse and the MouseDown event are triggered
  also when you hover over the textfield object. Even when I turned the selectable property.
  
  Any idea of what is the cause?
  
  In the main timeline, I made this script:
  
  function cs_buttonEvent(event:MouseEvent):void {}
  
  trace (Event.type);
  
  Switch (event.type) {}
  case "mouseDown":
  event.currentTarget.gotoAndPlay ("down");
  break;
  case "mouseUp":
  event.currentTarget.gotoAndPlay ("up");
  break;
  case 'mouseOver ':
  event.currentTarget.gotoAndPlay ("over");
  break;
  case 'mouseout/mouseouthandler() ':
  event.currentTarget.gotoAndPlay ("out");
  break;
  by default:
  trace ("mouse five event");
  break;
  }
  
  }
  
  cs_btn.addEventListener (MouseEvent.MOUSE_DOWN, cs_buttonEvent);
  cs_btn.addEventListener (MouseEvent.MOUSE_UP, cs_buttonEvent);
  cs_btn.addEventListener (MouseEvent.MOUSE_OVER, cs_buttonEvent);
  cs_btn.addEventListener (MouseEvent.MOUSE_OUT, cs_buttonEvent);
  
  

  You can assign the check fake gold button mouseChildren property the
  target in the event handler.

  function cs_buttonEvent(event:MouseEvent):void {}

  If (event.target! = cs_btn) return; bug out

  trace (Event.type);

  Switch (event.type) {}
  case "mouseDown":
  event.currentTarget.gotoAndPlay ("down");
  break;
  case "mouseUp":
  event.currentTarget.gotoAndPlay ("up");
  break;
  case 'mouseOver ':
  event.currentTarget.gotoAndPlay ("over");
  break;
  case 'mouseout/mouseouthandler() ':
  event.currentTarget.gotoAndPlay ("out");
  break;
  by default:
  trace ("mouse five event");
  break;
  }

  }

• adobeconverter_8_8.exe could not be downloaded when you use windows 8.1 and IE 11

  I get errors when downloading this file on the adobe Web site, even when you're connected. This happened for some time.

  Well, have you even tried another browser?

  Mylenium

• Get ReferenceError: Error #1065: Variable Transform3DController is not defined. When you use the debugging.

  Hello

  I just upgraded my Flash Builder to 4.6. Since the upgrade I get the following error right when I run my web files through debugging:

  ReferenceError: Error #1065: Variable Transform3DController is not defined.

  Global / flash.utils::getDefinitionByName()

  at ominds.mouseinspect::MouseInspector/onTmd3dModuleLoaded()

  I don't know if it came from the new update to the constructor or if it comes to liberate an issue with the new 11,1,102,55 Flash Player. It seems that when I arrived to http://www.adobe.com/software/flash/about/ it does not even load the flash movie.

  I'm on a Mac OS X 10.6.8 and I use chrome for most, but this problem also occurs in FireFox.

  Does anyone have ideas to wtf is happening?

  Thank you

  -Nate

  This is Firebug Firebug/Flash, the origin of the problem. I had to remove completely all firebug on the addons of firefox so that he stop throwing the error.

• The page is not redirecting properly when you use a redirect link

  When I try to go to a Web page like adf.ly it gives me the error! I really need help with that. I've allowed cookies I tried some things in the subject: config and deleted my cookies, nothing seems to work!

  You can delete all data stored in Firefox with a specific area through "Forget this Site" in the context menu of a history entry ("" history > view history "or" view > sidebar > History "") or via the subject: permissions page.

  Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from that domain you don't want to lose then check that back up these data or make a comment.

  You can't recover from this "forget" unless you have a backup of the files involved.

  It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

  You can also view the journal du Net and network log in the Web Console (Firefox/tools > Web Developer) to see if you can figure out why you redirected.

  • https://developer.Mozilla.org/Tools/Web_Console

• e-mails do not print correctly when you use MS Outlook

  I was forced by msn.com to accept an 'upgrade' of MS Outlook Hotmail vice for my msn account. With Firefox Outlook of 19 cars loaded and I can read my email, but I don't get the Outlook buttons for printing, etc. If I try and print a mail with Firefox (click on file, then print), the output is not email, but rather a 'view' print, that is, the entire email will print not so long, and all the elements of print screen as well. I am at a loss in trying to solve this problem and have spent a lot of time trying to find answers online. I use Windows 7. Any help would be greatly appreciated.

  On mine, there is a menu «...» "where I have the command to bring up a version in the printing of the message format. You will find that, and made the opening of pop-up windows? If it is blocked, you may need to create an exception in the blocker for live.com.

• How can I change the length of note by default when you use the keyboard as input in piano roll?

  Note the length of the input to the midi keyboard

  Use the keyboard to input stage (Menu bar > window > entry step keyboard) choose the length of the notes you wish to enter the Piano Roll in conjunction with your Midi keyboard...

  

  Turn on the input Midi in the Piano Roll, if you do not have...

  

  Now you play notes on your midi keyboard notes will be length whatever you selected in the step of keyboard input interface...

  Note: If you do not find the keyboard under the window input stage... All the features of Logic work... so make sure you that you have enabled ALL the advanced tools in logic preferences and available for you.

• "Could not perform this operation because the default mail client is not properly installed" when you use Windows Mail

  Original title: loss of entrance of Protocol in the list of saved files

  I use an old Toshiba laptop of two year with Vista as an operating system. It came with a trial version of Microsoft Office already installed. I had no use for it then after the trial expires I uninstalled. This seems to have created a minor problem with the e-mail program. When I visit a Web site and click on 'Contact us' I get an error message as follows "cannot perform this operation because the default mail client is not properly installed." I suspect strongly as during the uninstallation of office he removed a protocol in the list entry, similarly, the bottom of the list of the saved files. A check with other similar computers with Vista installed seems to confirm this. If someone at - it a quick fix to this problem? I don't want to resort to installing a whole new email software to fix this minor problem if I can avoid it.

  Hello Karena R, yesterday, I downloaded and installed Windows Live Mail, and I must say that I prefer Windows Mail Live Mail program. After making sure that Live Mail is the deafult for all messaging functions and that the entry "Mail Protocol" was now back to the list of saved files, I checked the problem mentioned in my original post. He is not fixed! Another small problem is fixed now if. In my "drafts" mailbox I have some e-mails stored there and when I click on one of them upwards now comes an email with the appropriate address inserted in the address line. Who could not before. I used to get this error message, which is now the new title of my post. So why the difference when I click on email address that I find on Web sites? Now, I also find that by Michael following the instructions (below), I do not see an entry "mailto" but his suggestion to step d. type in "URL Protocol" is not appropriate because it is already there. The installation of an entirely new email software should have my computer all the necessary entries for the new program to function properly in all respects. So what's happening? It begins to look as if uninstalling the program Office has pulled something real Vista operating system.

  It's a good thing, I thought of the research on other boards for my missing post.

  HKEY_LOCAL_MACHINE\Software\Classes\mailto

  c. in the Edit menu, select new, then clickstring goodwill.

  d. type of Protocol of URL as the name of the new string value

  e. exit the registry editor

• How to make sound to play through my headphones and not my TV when you use an HDMI cable to extend my desktop?

  Often, I connect my laptop to my TV to extend my desktop and find work more quickly. Today, I wanted to listen to music then I worked, but did not want to disturb others in the House with the sound so I plugged my headphones on my laptop but the sound plays through television. How can I get it to play through my headphones only?

  I do not use HDMI but audio HDMI runs your graphics instead of the audio chip

  the laptop, so I think that you can turn off the HDMI audio in your graphics cards

  The control panel settings.

  -If not, you should be able to disable the HDMI audio via Device Manager.

  The HDMI audio will probably be known as your graphics (Nvidia, AMD or Intel).

  [Type Device Manager in the search bar on the Start Menu and select - sound, video and game controllers.] R / click on the appropriate audio device and select disable. ]

  Or - connect your headphones to the TV should turn off the sound from the speakers.

  You can purchase an extension for headphones, if necessary.

• import program does not process customized when you use the shell script

  Hello

  I have the pkg in that

  PROC1 without leaving param in this procedure, I call you created proc2 import and program

  Now, I call this proc1 in the shell script, here my flat program to import does not work

  Why? and I try to use CONSCUB on proc1 using 2 output param which is errbuf, retcode in the newspaper, I'm "wrong number of arguments"

  Please help me?

  Thank you

  Renon,

  Proc1 is your first program at the same time, right?

  How many parameters is defined for that?

  You can paste a screenshot of the window parameter?

  If there is no parameter, just use this:

  $FND_TOP/bin/CONCSUB $LOGIN SQLAP 'Accounts payable Manager' WAIT ' rajesh' = N SIMULTANEOUS SQLAP PROC1

  Assuming that "Renon" is a username of fnd and the program is set in the Application of accounts payable.

  See you soon

  AJ

• File not found error when you use agent ODI.

  Hello

  I am trying to load data using the csv file and get the following error.

  ODI-1227: SrcSet0 (load) task fails on the source FILES LOCAL connections.

  Caused by: java.sql.SQLException: ODI-40438: file not found:

  I am going through the oracle blog and discover this ODI agent and the source file must be in the same server. But I can't place t of the file to the server of the odi where the agent is running. Can anyone know how to solve this problem.

  ODI configuration:

  ODI 11.1.1.7

  ODI Linux server

  ODI Client Windows 7.

  Thank you

  P

  Hi Paul.P,

  If you select an agent for execution of your, this agent should have access to all sources of data (DB, files,...) used in your integration project.

  You can map a network drive on the server where the agent is running and move files. Or you can get it from the original location via FTP or sFTP, for example. But your server must be able to manage this file at some point, if you want to use.

  If there is no way you can have the files on this server, you must take the opposite approach and install a new agent, where the files are located.

  More information: http://www.ateam-oracle.com/understanding-where-to-install-the-odi-standalone-agent/

  Kind regards

  JeromeFr

• ORA-00902 error invalid data type when you use CAST in the PL/SQL Package

  I'm getting ORA - 00902 Datatype not valid error when you use cast in getEmpValues (see code below) method in the package I created.
  I don't know what is the cause of the error. Any help would be appreciated
  
  
  
  CREATE OR REPLACE PACKAGE TEST. TEST_PKG AS
  
  ARRAY TYPE MyTableType IS NUMBER;
  TYPE REF_CURSOR IS REF CURSOR;
  
  FUNCTION str2tbl (p_str IN VARCHAR2)
  RETURN myTableType;
  
  PROCEDURE getContactValues (p_ParameterString IN VARCHAR2, p_Cursor1 to REF_CURSOR);
  
  END TEST_PKG;
  
  
  
  CREATE OR REPLACE PACKAGE BODY TEST. TEST_PKG AS
  
  FUNCTION str2tbl (p_str IN VARCHAR2)
  RETURN myTableType
  AS
  l_str LONG default p_str | ',';
  l_n NUMBER;
  myTableType l_data: = myTabletype();
  
  BEGIN
  LOOP
  
  l_n: = INSTR (l_str, ",");
  WHEN the OUTPUT (nvl(l_n,0) = 0);
  l_data.extend;
  l_data (l_data.count): = ltrim (rtrim (substr(l_str,1,l_n-1)));
  l_str: = substr (l_str, l_n + 1);
  END LOOP;
  L_data return;
  END;
  
  /*
  p_ParameterString is a string of the form 3, 6, 8, 9'
  */
  
  PROCEDURE getEmpValues (p_ParameterString IN VARCHAR2, p_Cursor1 to REF_CURSOR)
  AS
  
  
  BEGIN
  
  
  OPEN FOR P_Cursor1
  
  SELECT *.
  FROM EMP
  
  WHERE EMP_ID IN (SELECT *)
  OF THE (SELECT CAST (TEST.) (TEST_PKG.str2tbl (p_ParameterString) as myTableType) double)
  
  );
  END getEmpValues;
  
  END TEST_PKG;

  ARRAY TYPE MyTableType IS NUMBER;

  This type must be created outside of the package as a SQL type if it must be used in a select statement.