EqualLogic Configuration Guide - delay of the ACK

Similar Questions

• IMAQ configure buffer - delay in the implementation of large number of buffers

  Hi all

  I don't know which forum I should post this in, but I hope that someone who can help me see this. I'm having a problem with a program that I wrote to acquire and store images from a camera to linear scan.

  My camera (SUI Goodrich, 1024 pixels) is connected to a card framegrabber (PCIe-1427), which is connected via a RTSI cable to a PCI-6731 card attached to a SCC-68 (series) connector M.  My goal is to drive a mirror galvanometer scanning and acquire images from the camera continuously on each scan. As the galvo scan will be the frame of an image (1024 pixels x 1024 lines).

  I managed to do it (I think), as my direct purchase program works exactly as I expected. However, when I try to save the images, I noticed that for a larger number of images, the starting point of the image is shifted the same amount for each image. I'm not really sure what's going on, it seems to me that there is a delay in the use of the VI "IMAQ set up buffer" when a large number of buffers is used.

  I would really appreciate any idea or ideas that anyone could have on this issue.

  Sincere greetings,

  Gill

  I fixed the problem by doing that I don't use actually 1000 stamps to save 1000 frames. Program works if the number of buffers is lowered.

• Announcement: update the Configuration guide for RHEL v6/v7 with storage Dell PS Series available

  Red Hat Enterprise Linux Configuration Guide for Dell storage bays Series PS

  This configuration guide provides information on the integration of the RHEL 6 and 7 operating environments with the PS Series Dell storage arrays using iSCSI technology. The guide includes tips for working with volumes, using MPIO and some performance tips.

  The PDF file is available here:

  Kind regards

  Don

  Hello

  With Linux, as any OS, iSCSI is not different from the SAS/SATA or Fibre Channel.  No matter how you are connected to a "disk", it looks like a SCSI to the OS disk.

  So yes, you use the mount points.   That's how Linux as most UNIX operating systems do it.  But use any method supported for other iSCSI disks.   In Windows, you can use drive letters or mount points.

  Kind regards

  Don

• Possible to set up buffer - delay in the implementation of large number of buffers - IMAQ trigger problem

  Hi all

  I thought that I could transfer it here because it might be a more appropriate forum. I have a bit of time pressure, so I hope someone can help me. I'm having a problem with a program that I wrote to acquire and store images from a camera to linear scan.

  My camera (SUI Goodrich, 1024 pixels) is connected to a card framegrabber (PCIe-1427), which is connected via a RTSI cable to a PCI-6731 card attached to a SCC-68 (series) connector M.  My goal is to drive a mirror galvanometer scanning and acquire images from the camera continuously on each scan. As the galvo scan will be the frame of an image (1024 pixels x 1024 lines).

  I managed to do it (I think), as my direct purchase program works exactly as I expected. However, when I try to save the images, I noticed that for a larger number of images, the starting point of the image is shifted the same amount for each image. I'm not really sure what's going on, it seems to me that there is a delay in the use of the VI "IMAQ set up buffer" when a larger number of buffers is used, (or even 100). Is it possible that my hardware trigger does not wait for all buffers to be configured before you start to run?

  I would really appreciate any idea or ideas that anyone could have on this issue.

  Sincere greetings,

  Gill

  I fixed the problem by doing that I don't use actually 1000 stamps to save 1000 frames. Program works if the number of buffers is lowered.

• Delay when the frequency of a tone is changed

  Dear users of the forum,

  I have a problem with the generation of a signal to VFD.

  I do this as in the attached program.

  The problem is the following:

  When I change the frequency, it does not change immediately. There is a delay until the change can be heard.

  How can I get rid of the delay/how can I make it smaller?

  I would greatly appreciate any help!

  Hello!

  Change the number of samples/ch in his output configure let 500. That should do the trick

• Windows xp sp3 delay at the start after login

  I have a windows xp sp3 with 2 GB of RAM and 250 GB HDD to 45-50minutes to load after I entered my user name and password.

  Please, how can I solve this problem. I checked the hard drive for errors, and the system will load faster on e-safe. Mode
  Concerning
  DOE

  To connect to your computer, there are a lot of programs, processes and services launch.  It is likely that one or more of these processes contributes to your delay.  The first criterion would be starting for a minimum system.  This is what we call 'Safe Mode'.  When you start your computer, several times, press the F8 key until a black and white screen comes up, and then select "safe mode" or "safe mode with networking" with the arrow keys and starts.  If your computer starts up fairly quickly, then we the non-critical elements that contribute.

  To debug this, you use a program that will show you all the programs that start at startup and allow you to temporarily cut some of them to determine what (s) is / are the cause of the problem.   Microsoft has a built-in program called "msconfig" or you can download another program called "autoruns" from Microsoft
  Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx >

  Instructions for the startup and use of msconfig are contained in this article:
  "How to solve configuration errors by using the System Configuration utility in Windows XP"
     <>http://support.Microsoft.com/kb/310560 >

  When you find what's causing your problem, the action is usually obvious.  Sometimes UN-installing and reinstalling is all you need to do.

  -JW

• My printer is configured to start when the computer turns on. I want to reconfigure it so that it does not turn

  My printer is configured to start when the computer turns on.  I want to reconfigure it so that it won't turn.  I know this is probably a simple change, but I can't find the path anywhere.  Any help?

  I guess you do NOT mean that you have both printer and computer plugged into the same power strip and both are turn on when you turn on the power strip.

  As nearly as I can determine the rather thin material in the Guide for the Dell P713w user, probably have enabled "Eco-Mode" or the mode 'sleep '.  See page 19 of the User Guide (if you don't have it, download it here: http://support.dell.com/support/edocs/systems/PRN_P713w/en/index.htm).

  When this feature is enabled, the printer goes into mode low power when it has been idle for a while.  When the computer is off, the printer is by definition inactive and so will go to low power, shortly after that the computer is turned off.  When the computer is turned on, it detects the presence of the printer and connects to the printer.  Apparently, the printer interprets this string as the "no-idle" and out of his low-power mode, which appears as if it is "turn on."

  In addition, this printer performs an automatic maintenance cycle every week if it is plugged into a power outlet. It will briefly exit Power Saver mode or turn on temporarily if it is disabled.

  At least one of the lights on the printer flashes power on and off when you think that the printer is turned off?  If so, it is in energy saving mode.

  Of course, I may be totally wrong, but it seems to me if you actually turn off the printer by pressing the button on / off on screen, he should not be able to auto (except once / week maintenance cycle).  From the Manual:

  Note: When the printer is turned on, press [power] to switch to the power saving mode. Press and hold [power] for 3 seconds to turn off the printer.

• Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.

  Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.  The dialog box only appears when that I disconnect.  In fact this problem can seriously mislead the user. The file has been copied to or not? This is a serious shortcoming of the operating system.
  A similarly delayed dialog box is to join files on a send to the recipient of the message.

  What is the cause of the delay? Dialog boxes are not under other windows - they break on screen as I log out.

  When I drag AGAIN the same file in the same folder, then I get a message that "the action cannot be completed because the file is open in another program.  (No doubt the program who was trying to copy in the first attempt and waits for a response to the dialog box may not show me!)

  Hardware: Computer laptop Asus M70.  VISTA Ultimate with the latest patches.

  Lorien, thanks for your response.
  A lot of time and effort was exercised in an attempt to find out WHY. I wanted to not just fix the symptoms. It concerned me greatly as a basic function of the operating system does not work. He was not fit for purpose. In the end I found that a third-party application compromised of WINDOWS VISTA 32-bit operating system. If an operating system can not reliably inform the user that an operation is successful or not, it is worthless. In the case above, I didn't move the files was a success (no response required) or the delayed response until I signed.

  In addition to the original problem, there was the following problem: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/24068518-31e0-4b23-823b-d54882792301 where "send to..." 'Recipient' disable the context menu in Explorer for JPG does not or not broken.

  Finally, I figured out the following error had something to do with my problems:

  Description:
  The server {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5} is not registered with DCOM within the required time.
  

  -

  -

   

   10010

   0

   2

   0

   0

   0 x 80000000000000

   

   198817

   

   

   System

   ASUS_M70VM

   

   

  -

   {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5}

   

   

  Arriving in my solution, I was inspired by the following articles http://blogs.technet.com/markrussinovich/archive/2006/08/31/453100.aspx     http://blogs.technet.com/markrussinovich/archive/2006/11/27/532465.aspx
  So I downloaded the MS debug tools and confirmed my suspicion of dllhost.dll using REGEDIT to set debugging on that.
  To cut a long story short, it's DivX 7.2 which caused me grief.  In particular, the file DivXDecH264.ax 'has an access violation - code C0000005 (first chance).  It has been autonomous in DivX Plus DirectShow Filters.     Thus, when it has been deleted (starting other Articles to original install DivX) through Control Panel of configuration/programs and features my system worked perfectly well.

  I know SFA on the architecture of Windows but why was this DivX file loading and cause an access violation whenever I used the windows Explorer?  How an operating system may fail in a basic function of by a third party issue?  There are some newspaper where this access violation was recorded?  It was only possible to identify it in debugging?

  What you fella?

• Impossible to change the Windows Media Center guide to allow the use of ot TV relay stations (translators)

  Live TV with Windows Media Center, where RF channels are different from that of the guide because of the distance TV translators (relay Stations)

  Cannot change the guide to allow the use ot (translators) television relay stations where the RF TV channel is different from the current station. For example, Station POLO6N is 9 RF channel in Eugene, OR, but here on the coast, it is the 35 RF channel. Zip code for our region apparently points to the station itself RF channel and the number of 1092 is shown and dimmed so that it cannot be changed. How the inputs of channel can be modified to adapt to this situation? Here on the coast, we're out of range (mountains, etc.) of the station itself.

  BH

  I have apparently discovered a way to watch and record live TV using Windows Media Center where the geographical area is served by the translators of the TV and the.

  If you configure the TV channels using only NOT the guide and using Add missing channels feature to add and configure the channels you use before you download the guide, you can set the actual RF frequencies of TV translators serving your area. In my case, I had to add the letters TD after the call signs of stations so that when I load the guide, he be to point to the current channel.

  After having added all channels and before loading guide, check the reception using the function designed to help you in the pointing of your antenna. Then load the guide and your channel configuration is retained and stored in a file pref.xml which apparently replaces the channels.xml file created by the loading guide.

  Unfortunately, detailed documentation on the product missing apparently (help files I found only State to follow the guests), or I didn't find it. In all cases, you can use Windows Media Center to watch and record live TV if you live in an area served by the translators/TV relay stations with different channels channels over-the-aor real real TV stations.

  If you find that you need to change a channel, use channel add rather than the function Edit channels, clear the X in the box and start over with this channel.

  BH

• AIR-WLC8-K9 configuration guide

  I have tried to locate the guide configuration or examples for the NME-AIR-WLC on the OCC, but couldn't find one. Grateful if someone could share this info.

  Hi Rohan,

  Maybe this will help you get started;

  Examples of Configuration of WLAN Controller Module (WLCM)

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_tech_note09186a00807112e2.shtml

  http://www.Cisco.com/en/us/products/ps6730/tsd_products_support_model_home.html

  I hope this helps!

  Rob

• Configuration guide benefits of Cisco context directory Agent (CDA) and AAA (on ASA)

  Hello

  I would like to set up and test AAA on a Cisco ASA (5505 or 5510).
  1 are there any other tools or server required to use this feature? And you have good configuration guides?

  I already tested a CDA of Cisco. He was able to show users active directory and their IP equivalent.
  2. do you have a brief explanation what kind of opportunities I have with this server/tool? It is perhaps usable for the AAA mentioned on the SAA?

  Thanks in advance

  Best regards

  1. Yes, you need a Radius like Windows Server NPS or RADIUS server such as Cisco ACS/ISE server.

  2. He's just a man in the middle of the ADC, you will always need an AAA server: radius or Ganymede (see # 1).

• Live event delay when the TCS/WinMediaServer multicasts

  Hello

  We are implementing a new infra composed by a DMM + SnS + TCS. The goal is to use the CHT as a 'Live Encoder"which is doing well.

  Since the latest version of the SnS 5.2.3 there is now an integration of the CHT in the menus of the SnS (see attached doc).

  We have followed the configuration and it works but since it is a LiveEvent target to be seen by all THE EMPLOYEES of my client, MUST use multicast.

  He becomes more complex because it seems, with the multicast to be used for multicast announcement .nsc file...

  The problem is when configuring for multicasting, the point of publication which is created dynamically in the WinMediaService part, begins with 5 seconds delay, and we lose the first 5 seconds of images!

  Can you imagine a CEO who wanted to talk to all employees, to be not heard when saying "employees dear Good morning '?

  For my client, it is not acceptable, and since this feature on SnS/TCS is described at the point of being ALIVE, it must the departure of the first image sent.

  Someone would have faced the same issue, and is there a way to "force" the publishing point in the WinMediaService to be "open/started" immediately?

  P.S.:

  With unicast in fact we had the same problem, but we have created a workaround solution by creating a fixed publishing point always started and referring to a folder where an initial video (actines as an introductory video, saying "The Live will start soon") was present in how to read the flow immediately when the real stream live from TCS was available.

  Multicast, because this obligation to use the announcement .nsc file, it is not possible more to apply this workaround.

  =>, is there another possible workaround with the multicast solution, in order to ensure that the workflow starts immediately?

  Hervé Collignon.

  Converged Communications engineer.

  [email protected] / * /.

  Hello

  I plan to do a similar deployment as you did. I'm a little curious if you found a solution to your problem of delay when the TCS multicast stream?

  Concerning

  OLA a.

• Can Cisco Configuration Professional to use the IPS feature?

  Dear Expert

  Hello.

  Could you tell me about Cisco Configuration Professional.

  I would try the IOS - IPS on Cisco2901-SEC/K9.

  I was looking to the ORC on Cisco Configuration Professional.

  Cisco2901-SEC/K9 does not support SDM.

  But the Cisco2901-SEC/K9 support the Cisco Configuration Professional.

  Can you Cisco Configuration professional to use IPS as SDM function?

  Kind regards

  Takuro.

  Hello

  Yes, you can configure Cisco Configuration Professional IOS IPS.

  CCP has a wizard to guide you through the process, there is a link for it:

  http://www.Cisco.com/en/us/prod/collateral/iosswrel/ps6537/ps6586/ps6634/prod_white_paper0900aecd8066d265.html

  I hope this helps you.

  -------

  Mashal

• Access restriction configuration network devices with the level of the ACS 5.0 user

  Hi Experts,

  I have some configuration tasks TACAC with level of different user for all routers and switches,

  To further develop, I engineer, analyst and site engineers, so I want to configure centralized authentication with Annie tacac different levels for the various categories of network engg. Analyst, site engineer,

  can someone explain about how to proceed with ACS 5.2 and what configuration is required at the peripheral level.

  I'm particularly looking for the 5.2 acs configuration procedure.

  Looking forward to get the answer.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/policy_mod.html#wp1076053

  In "default device admin" just create authorization rules.

  They should look like "If the user/group type = site engineer, then assign the shell profile X.

  You then define the profile of shell in the elements of policy and put in there all the privileges of your engineer to site.

  And so on for the other roles

• Configuration of version of the highway X8.2.1

  Hi all!

  I'm new in the world of VCS-Highway and I would like to know if there at - it a configuration guide for channel Express version x8.2.1 or better yet an example.

  It's my scenario:

  IM & P: version 10.5

  CUCM: version 10.5

  Highway x8.2.1

  Best regards!

  Check this: http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config...