Equiuim L300 - not light, seem to be without power

Hello

The laptop does not light and there seems to be no power going to the laptop at all. I think that the food came lose as when the charger is in the port and drawn out there is a good amount of movement. Is and easy fix or I will leave it to the professionals?

If there is a problem with power electronic power supply or DC itself port work for professionals.
To correct this notebook must be dismantled. You can do it on your own?

Tags: Toshiba

Similar Questions

  • Tecra A4 does not light when you press the power button

    When I press the power on button it turns green for 4/5 seconds then turns off.
    "I do all the tests the support on the page:

    * Press on and press and hold the Fn key and press the F5 key repeatedly. If an image appears on the display, this indicates that the image has been activated to a connector for a monitor outside, causing only appear to be off the computer.

    * Connect the adapter to the computer.

    * Remove the battery and unplug the AC adapter and then connect only the AC adapter. Make sure that the power adapter is one that comes with the computer. Try to turn on the computer again, without the battery in the computer.

    * Plug the power adapter into a different plug.

    * The battery, ensure that there are enough energy to start the computer.

    * Press and hold the power switch for 10 seconds (to make sure that the computer is turned off). Wait five seconds, and then tap on and again, hold the switch for three seconds (turn on the computer).

    * Ensure that nothing beats (a sliding plastic cover) in the path by pressing the power switch.

    * Disconnect all devices (printers, pointing devices, keyboards, etc.) connected to one of the ports on the computer.

    * Remove any additional memory, beyond the computer built in memory, or the first module of memory in the computer. If the computer starts correctly, reinsert the memory and turn the computer back on. If it does not start successfully, memory can be inserted incorrectly, it may be defective or the support of memory may be damaged. "Try to replace the module memory."
    In vain:]

    You know? THX

    Hello

    There must be a hardware malfunction.
    You have tested a lot and nothing has worked
    I think there is not much to do, you all tired and I guess the authorized service provider could help you

    If your warranty is valid all should be done for free, so don t you worry and ask the experts ;)

  • Card AXS reader came without power cord

    Just received two readers AXS - CR1 of B & H and both have are brand new and not opened with unbroken seals without power cords. The power brick has been included, but not the part that goes in a wall outlet.

    Not a big because they are really cheap and can buy them anywhere, but thought you might want to know.

    Same thing happen to me, when I bought mine...

    Ryan

  • The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and

    The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and reinstall the software, rebooted a couple of times and tried to activate the download of the Premier Pro via the website, but it still doesn't load in the desktop application.

    This solved the problem for me:

    Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  • Satellite Pro 4230 - does not light

    Hello
    I have the following problem:

    A Satellite Pro 4320 will not feed, DC-in light is on (green), with inserted (quite old) battery, the quickly flashes orange, (charge of compensation, according to manual) battery. If I press the power button / stop, DC-In goes off for half a second and turns on, that of all, nothing else happens.
    The power supply is 15V 4Amps one correct, I load tested it works and provides all the power, according to the specifications. It does not matter if the battery is inserted or not.

    Now the question: is this a battery problem or there is a problem with the entrails of laptops (internal DC converter)? Normally, your laptop should work on the included power supply.

    Best regards
    Nohab.

    Hey,.

    > Normally a laptop should work on the included power supply.
    You're absolutely right, mate. All cell phones work with power supply only, theoretically, a battery is not necessary. That's only important if you want to work without power, otherwise laptop mobile working with power supply only. No battery is needed.

    So my personal opinion it of a card mother dysfunction :(

  • Satellite L655 lights not lights only blink

    Everything disconnected from the laptop. DVD player, HARD drive, card reader, battery, Wi - Fi. Only the processor and memory (it is tested on another laptop) are connected. I plug in the power supply. The indicator of the power unit connection (the first on the left, white in color) lights.

    Press us the button of inclusion, the laptop does not light. Only indicator of connection of the power unit (the first on the left) is turned on, and two indicators - the second left and the second on the right flashes 1 time white color.

    He likely error codes. How to understand them?

    Hello

    The second on the left is the power indicator.
    Normally this indicator turns white when the computer is turned on. However if you turn off the computer in standby mode, this indicator will blink orange: a dry in two off dry.
    Once when the system shuts down and while it remains off.

    The 3rd from the left, indicator of battery show the State of charge of the battery: White indicates that the battery is fully charged, orange indicates battery recharges and orange blinking indicates the low battery level.

    The second on the right seems to be an indicator of (bridge media slot) of SD card and it turns white when the computer accesses the sd card.

    To me, it seems that the motherboard is affected and that means you need a help of technicians

  • Satellite Pro L300-PSLB1E: XP does not control the wifi to the power connection

    * + Hello + *.

    I have a model Satellite Pro L300-PSLB1E and a XP Professional SP3 on it.
    Already everything works because I had a compilation of drivers copy of the past.

    The problem is that XP does not control the WiFi works without danger the and it disconects when I close the lid.

    So I tried with the power that said safety program to:

    Bq. [06/04/08 Power Saver Toshiba Windows XP 7.04.02I | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpwrsav-es-20080519173239.zip] + doesn't work-error 0 x 0 +.
    And I tried also with the thought of program Toshiba wifi on 32-bit compatibility:
    Bq. [Intel PROSet/Wireless Software | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpro-ncs-20080416140552.zip] + doesn't work too-Said controller is not installed when you and full work +.

    So, how to control the peripheral power turn off on?

    Bq. * + thanks for your attention and patient. + *

    Hello

    Firstly the Toshiba Power Saver requires the installation of the common Module.
    The common Module for Win XP v1.00.05 can be downloaded from the European pilot page Toshiba.

    So before installing the energy saver, install common Module, restart the computer, and then try the energy saver.

    In addition the Intel PROSet/Wireless Software can be used only with the Intel Wlan card.
    Is the laptop supports the Intel wireless network adapter?

    AFAIK the L300 series can be equipped with a Realtek, Atheros and Intel Wlan card
    Check it!

  • I don't know but its all white: my tablet screen does not light, but the sounds and touch are ok. Please help me!

    I dropped it and now the screen does not light, but sounds like the notifications are on.

    Hi!, Sensei:

    Welcome to Forum!

    To help you, is necessary that you enter make, model (without serial number) and operating system.

  • L750 satellite is not booting - does not light

    Hi, I have a Sat L750D-14R (3 years) that the powers are no longer on nor do the lights go on when the power cable is fixed; the food is very good - see last paragraph. I tried power with only the battery and removed but battery power cable set and the unit remained completely unresponsive in both cases. Everything is nothing, no light, no sound, nothing.

    Little background. Left corner of a few months back (Apr) the thing took a dive on the lower hull cracking on the back and the moving screen, however, after connecting to an external monitor the startup thing fine, showed no sign of additional damage / questions and worked without a hitch so far. Close one day last week and when I came back two days later and turned on the plug I noticed that the usual lights were dark, and thereafter nothing has worked.

    Since then, I have opened it upward and can see no obvious visible damage to any of the internal components. I had met some info on a short-circuit via the screen and as he was broken in any case, I unplugged the cable from the screen. Unfortunately, this made no difference, and the unit is completely dead.

    In addition to checking the base power adapter was not at fault, I used a multicard and having a blue on light. When it is plugged into the laptop would go blue light which must be stable for a few seconds, then off for a few seconds, on the back and would keep it if I had not immediately disconnected it. Needless to say, this is aberrant behavior. I thought maybe the power supply is in some way responsible but surely the unit should start up on battery alone at least until the battery runs out?

    Any ideas as to what might be causing this or how I would go to the audit of the other?

    Bravo for pointers.

    Can you tell us what you did exactly?

  • Equium L20-197 does not light up at all - on button / stop flashes and nothing happens

    Hello

    I own an Equium L20-197 and it currently has a power problem. It does not light up at all. When the device is connected to the machine the orange light comes on to show that there is a power source but when I hit the power button the flash just buttons and nothing happens.

    If I hit him again once all the lights go out and the whole system fails.

    Any ideas on how to solve this problem?

    Thank you
    Alan

    Hello

    Did you put this phone in the standby or hibernation mode?

    Read this description, it seems that the laptop has been in one of these modes and cannot wake up.
    Try to remove the battery from the laptop and unplug the power adapter.
    Several waiting time (~ 20 min) and reconnect the battery and the AC adapter.
    Then try again to put the laptop.

    If she will not be able to boot up the laptop I presume the ESF on the dysfunctions of the motherboard.
    In this case the contact of technicians would be desirable.

  • My Dell Inspiron 530 will not light

    The computer has been like that for a while now. When I have the power cable connected to the back of the computer the Green underside is on so I don't know if it means that something is supposed to happen. When I opened the computer there is a yellow light as well. But when I hit the power button to turn on nothing happens, fans did not move at all. And if I remember when I opened the computer there was a few stray wires disconnected, I tried for about 10 minutes around the motherboard to find that these cards could go on. I have found none. I followed a cord in the back and he went into the motherboard and fan and another went in a box (where the power cord goes into the back). These cords may not be connected when the computer still worked well, I'm not entirely sure about this. I don't have a lot of money to replace the points and I did well in computer science and more telling me instructions on what to do.

    peterfaix

    Absolutely nothing happens when I press the power button. The yellow light on the motherboard is immediately, without flashing what so ever. And when I said the green light is the I meant right where you plug in the power cord. It's on and stays green as well. No flicker.

    peterfaix
        
    As the power light button does not lite, better to replace the power supply first, as you need a diet 'known' work to check the system and motherboard.

    As you have a mini-tower 530 standard ATX power supply units can be installed, with a 24-pin or 20 + power connector 4-pin main motherboard, with or without the on/off switch.

    You should be able to buy a compatible power supply either a local computer or online store.

    Note: A power supply with four SATA power connectors, is necessary.

    Power supply replacement procedures are here:

    FTP://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/Inspiron-530_owner%27s%20manual_en-us.PDF

        
    Bev.
  • HP Envy laptop monitor does not light

    Just bought this HP Envy with Windows 8 just over a month ago.

    Today, after the installation of an HP recommended that Windows Update the monitor does not light.  The power led is on the internet led is activated and the CAP turns on if you press.  Still no monitor.

    Bought it at best buy and it's a drive of 1 1/2 at this store if I have to take it to Geek Squad

    If you have windows 8.1 on it then it looks like the update of kb2903939 killed. I fight with this problem since Christmas.

    Power cycle the cell several times without leaving start completely. It should bring up a screen of recovery. If you can find the path to start safe mode, you can uninstall kb2903939 and then restart. That fixed my problem.

    Otherwise, it should be a call to HP or Microsoft support.

  • Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please. I have

    Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please.

    Troubleshooting help here > Apple Portables: Troubleshooting MagSafe adapters - Apple Support

  • my mac book does not light and I get three beeps while it tries to start

    my mac book does not light and I get three beeps while it tries to start

    Three beeps is almost always a problem of memory RAM.

  • I lost my mini iPad and I do not know how to locate without, find my iPhone

    I lost my mini iPad and I do not know how to locate without having to use, find my iPhone

    You can't find it if you do not find my iPhone turned on. Do you provide?

    Here's the Apple Support article for all the things you need to do if your device is lost or stolen:

    If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

    Good luck

    GB

Maybe you are looking for