Equium A200 - loss of functionality of scrolling touchpad

Similar Questions

• Touchpad does not at all on Equium A200-1VO

  Hello people out there, this is the first time im making a comment on a forum!

  I'm in a bit of a mess right now.

  Here's the story

  * I bought this laptop about a week ago 2nd hand
  * delivered with only the laptop and the charger
  * NO RECOVERY CD
  * To upgrade my version of vista frm Home premium Ultimate!
  * Everything was going well, I downloaded updates
  * THE TOUCHPAD NO LONGER WORKS
  * I reinstalled Vista premium edition again, and the problem was still there.
  * checked in Device Manager and it says that the device is correctly workin
  I TRIED THINGS *.
  Re-installation of Vista
  UN-installing and reinstalling drivers
  Download the latest drivers
  Change touchpad settings
  tried the function keys (FN + F9)
  still no joy!

  It's really bothering me now because I know that he worked at the beginning
  I tried to 11hours altogether to get the touchpad to work

  someone help me please!

  Hello

  This laptop seems to belong to the series of PSAF5E.
  I wonder where you found the drivers for this series?  :|

  However, I checked the Toshiba European page and didn t find the driver for the touchpad Vista especially for this series.
  BUT the page provides a few (two drivers) touchpad for the Equium A200 PSAEE.

  I recommend to install the Alps Electric Touch Pad driver v7.0.301.4 and the driver Synaptics Touchpad v. 9.1.14.0.

  By the way; It s always advisable to reinstall the operating system with the Toshiba Recovery CD. If you n t have these CDs you could order it from the ASP which is responsible for you country.

• Function keys lost after installing XP on Equium A200 PSAF5E

  Hello
  I installed Xp on my Equium A200 PSAF5E and there goes MUSH FASTER!
  But I lotso function keys, I was expecting
  Any idea on how I can put them up yet? Any software, driver or what else?

  Thank you
  Simone

  Hello Simone

  If you want to downgrade OS on your Vista preinstalled laptop, it's very important to do BIOS update. If I remember correctly, it must be updated to BIOS version 5.20. Please check on the Toshiba download page.

  After the BIOS update, please install all the stuff of the Toshiba download page according to document Instructions of facilities. The order of the facilities is very important. In this case, everything should work well.

  Please be careful with the update of the BIOS. Download update for your model of laptop tracking number PSxxx. Before you begin to update BIOS don't forget that the laptop is connected to the power supply current.

• Functionality of scrolling on the touchpad does not work... help!

  I have an Inspiron 1525, just the other day that the functionality of the touchpad scroll has stopped working.  I tried to look in the control panel to find an option to turn "scroll" back on, I found nothing.  I am running Windows Vista. Any suggestions on how to turn "scroll" back on?

  Hello

  Try the system restore before you did it again at:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  -------------------------------------------------------

  If necessary:

  Control Panel - mouse - look for the TouchPad settings - mine is on the settings of the device and your own tab
  may be different (it is NOT the Scrollings tab which is for the mouse). On some, you can activate
  and disable scrolling and/or define the size of the area and the sensitivity of the touchpad.

  Some will have a TouchPad progam/control icon in the Notification area near the clock - low
  right.

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• loss of function of the keyboard and the touchpad

  I am a rural small repair shop and received a HP/Compaq Presario CQ60-615DX to repair the loss of function of the keyboard and the touchpad. My first thought was that the Ribbon connectors came loose. However, when I first turned it on, the keyboard worked to enter the Windows password. Once started, the keyboard would not work. My client had a major sale/repair company and their solution was to install a keyboard on the screen and use a wireless mouse. I started my research in this tthinking of problem that perhaps it was caused by malicious software. Fortunately my client gave me the AC adapter while I was looking for input on the laptop voltage. It wasn't on the outer label, so I removed the battery. I reinstalled the battery and was amazed to find that both keynoard and touchpad work now.

  What could have caused this loss of function and why would be to remove and reinstall the battery solve this problem?

  It's probably that the battery actually acted as a hard reset.  A hard reset has the effect to remove remaining current EEPROM and other devices on the motherboard.

  Best regards

  ERICO

• Equium A200-15i - loss of internet connection

  Hello!

  I have a really strange problem with my Equium A200-15i. My computer loses the connection with the internet very often.

  Connectivity shows that I am connected to the LAN or WLAN (if I use an ethernet cable). However, I am not connected to the internet. The network said "connected" icon, but everytime I open IE, the display shows 'page not available', my email client and communicators do not work as well.

  I checked all the wireless and ethernet settings and they are ok. Ive has run the diagnostics - ok. Device Manager indicates NICs (lan and wlan) are working properly. Router (BT HUB) is ok, there are more than two computers with it and they work perfectly (another computer laptop workes on wireless and PC is connected with the cable), so the problem is with my Toshiba only. Also, I say that we had a differenf router before and everything was good.

  When I restart my laptop it is internet connection but not for long. After a few reboots even who stops to help and I get the message "connected to the unidentified network, limmited to access" or sth like that. Then I restart the router security settings, fix it again and put the new settings into my laptop. This may help, but not for long... After a few days or a few hours sometimes everything again.

  Anyone, please help. I'm really, really confused :(:(

  Hello

  Please talk to WLAN and LAN connectivity separately? As a first step, it will be interesting to know what is with LAN connectivity. If you disable WLAN you are able to use permanent LAN connectivity?

  In most cases people have problems with WIFI but not so often with LAN connectivity because of that as a first step, that I just want to know if the local network works well. I have 3 laptops connected to my router and have never noticed any problem with the connection to the local network. I must say that I have the PPPOE settings. All of the TCP/IP parameters are set automatically to.

• Equium A200-15i: I can't use the touch pad - no response

  I can't use the touchpad in my equium A200-15i.
  When I press the button, there is no response at all.

  Please help me to solve it.
  I tried to uninstall the program and reinstalled, but the problem persists.

  Hello

  Have you checked if the touchpad is properly activated?

  Using the FN + F9 key combination, you can disable and enable the touchpad feature!
  Please check this function if you have not disabled the touchpad accidentally!

  Last but not least, I would recommend checking settings the touchpad mice control-> Advanced-> advanced settings panel.
  You will find different options that can be configured to use all available touchpad features.

  Best regards

• Satellite A200-10W: I lost dual-mode Touchpad after Windows update

  I got a satellite A200-10W. The touchpad worked well at the beginning. Then, an update of windows has been installed and I lost dual mode on my touchpad.

  It is for me a normal function as a touchpad, but the mode button does not work. It lights, it do give me the button options, volume control does not work it did not scroll even in normal mode either.
  I reinstalled the drivers both synaptics and alps, but nothing helped.

  How can I ever use dual-mode again?

  Thanks for any help!

  Hello

  Very strange I didn't noticed any problem with the touchpad after the windows update.
  I have updated my windows and then lost the sound. After restarting again I ran the update and the Øresund back

  But if you, it seems that the MS updates could be a bad influence on the functions of touchpad.

  Have you chosen the touchpad drivers just for the PSAECE series?
  The Synaptics Touch Pad driver to set the properties and the touch pad control functions.
  And the Alps Electric Touch Pad Driver allows you to set the properties and functions of mouse control.

  Perhaps you need to configure the settings again after the new installation of drivers touchpad?  :|

  But have you tried to update to Windows Vista again? Sometimes, you have to restart the laptop to get all the necessary updates that will fix the problems.

  In a value of the case, recover the laptop and does not perform the updates of windows

• Equium A200-1V0: DVD-RAM UJ-850 s does not read data discs

  My laptop seems to have decided to stop reading data disks.
  However, there is no problem with the audio CD, but when I insert a data disc such as the software considers the disk is empty and try to format the drive.
  I searched internet day for solutions and tried without success to the following:

  Removed the UpperFilters and LowerFilters in the registry.
  Uninstalled and reinstalled drivers.
  Bought DriverWhiz (waste of money!)
  Tried to access disc command prompt that generated the message "incorrect function".
  Tried to use the enforcement function and access an exe file that I know is on the disk, but it comes up saying I need to format the drive
  Uninstall service packs
  I even thought it might be something to do with the MagicVirtual drive I had installed so I uninstalled completely which
  I uninstalled real player

  I'm about 3 minutes to destroy my laptop so any help would be appreciated.

  Laptop: Equium A200 - 1V0
  Drive DVD - RW: MAST * a DVD-RAM UJ-850 s ATA
  OS: Windows Vista

  Hello

  Deleting upper and lower filters was the first idea that I'd like to share with you, but it seems that you have already tried this solution proposal

  How about windows boot CD or a linux live CD?
  Is this possible?

  If not then I thing that the question could be linked to the wrong material work I m thinking on the issue of laser lenses eventually the laser lens can not calibrate properly and this could be a problem

  In this case, only a replacement CD/DVD drive can help greet

• Re: Equium A200-1V0 using XP - Lan driver needed

  I am new to this (and other) forum apologies if this has already been answered.

  I had an Equium A200-1V0 that came with Vista Home installed. (As a working machine) asked me to install XP Pro on it instead of Vista.

  Now I have ALL the drivers loaded and working with the exception of the Ethernet controller. I am at a total loss what to do I tried all I can find the drivers of which some of the Vista ones.

  I can't determine if it is integrated into the motherboard or attached via PCI. I can't find any panel below to switch to a different PCI even though she might be under the keyboard (hated to take it apart too much yet).

  Any help would be greatly appreciated.

  The A200-1VO belongs to the PSAE6E series.
  Please choose this series to install LAN driver!

  Just a note; The laptop was equipped with the Realtek(10/100M) LAN chip.
  If you wish, you can test a LAN driver on the Realteck site.

  PS: If you use XP on this laptop Vista you must update the BIOS to the XP version.
  It is very important to ensure that some laptops additional features will always be available and will work using the XP operating system.

• Equium A200 - DVD drive missing

  Hello

  My Equium A200 is only 3 months old and the dvd player has "disappeared."
  It does not appear in my computer or Device Manager.

  The tray will also not stay closed... any ideas anyone?

  Hello

  The fact is that the CD/DVD drive doesn t need a special driver because the STRANGE simply uses them pilot which belongs to the Windows operating system.

  I think you should check if the CD/DVD drive functions. So how can I test?
  Well, you can try to boot from the Toshiba restore CD to check if the ODD is able to manage the CD.

  I think that whole OS installation is a drastic procedure, but I think he might back allows for the STRANGE.

  Good luck

• Equium A200-1VO: update Bios issue

  Someone at - it updated the Bios here with the latest offer.
  I wanted to do because the port for express adapter card seems to not work properly.

  But all I get is an error message - 120 of Winphlash saying the Bios is incorrect, but I downloaded it twice and double checked each stage.

  Equium A200-1V0 seems to belong to the series of PSAF5.
  Have you downloaded the BIOS for this series?

  In addition, you can check the label at the bottom of the unit. You should see the serial number too.

  By the way; I put t think that the BIOS update will solve the problem of port adapter express card.
  I put t know exactly what the problem is, but if you use the compatible and fully support the express cards then everything should function.

  Best regards

• Equium A200-1HS - white screen when executing a stack

  Help! Screen is blank when running on the battery. I have Toshiba Equium A200 1HS PSAE2E, BIOS is upgraded (1.80), so the screen Intel drivers (at least Windows (Windows Vista SP2, 32-bit, Home Premium) says).

  This occurs when you are running on battery only. It can happen at any time (even when I use the computer), the screen is set on turn off after 5 minutes, so it isn't that. The backlight is still, but the screen is blank (usually black (or dark grey?), but other colors sometimes also). It seems that the computer is still ongoing. To fix it, I put the lid down and let him go to the standby mode (not hibernate) and open again and it works.

  While running on battery, the screen flickers as (with lines?) every few minutes or so, when the screen is to 'work' (this does not happen when the screen is blank, I think)

  How should I do?

  Dear Jege

  We can discuss here everyday but I think you should seek professional help. Service has special tools to check the LCD and the features of the graphics card. They say that this level occur and if this happen because of a malfunction of the equipment.

  What you can do is to test the functionality in different ways, but I don't think you can fix it.
  In any case, can follow you the things:
  Marketing your laptop computer and enter the BIOS settings and leave it for a while.
  Is there a problem with the display feature? Test it with the dough and power running.

  Start the operating system in safe mode and do the same thing. No problems with it?

• Equium A200 - windows requires a driver for Microsoft ISATAP Adapter

  Hello

  I am a complete newbie at this forum and came looking for help. I recently bought an Equium A200 laptop computer with Vista preinstalled.

  Lately when I start the computer and log in to Windows, I get a message that windows requires a driver for an unknown device and ask for permission to connect to the internet to find the driver concerned. When I click on this option, I get a message saying that the computer has found the driver but has encountered an error trying to install "Microsoft ISA TAP adapter".

  What is it and why should we need for installation? I thought it was quite strange. Any ideas people?

  Any help will be much appreciated.
  J.Sutton

  Hello

  I searched a bit in the Microsoft Knowledge base and discovered that this symptom appears on computers running Windows Vista.

  http://support.Microsoft.com/kb/932520

  Microsoft recommends that ignore this error message. This error message does not indicate a problem with the adapter, computer or any other device. The adapter will continue to function correctly.

  Here are more details;
  + Microsoft ISATAP what inter Site Automatic Tunneling Address Protocol device is used to help the transition to an IPv6 infrastructure companies. Map ISATAP encapsulates IPv6 packets with an IPv4 header. This feature allows the customer to carry IPv6 traffic over an IPv4 infrastructure. This approach allows organizations to migrate slowly to an IPv6 infrastructure without having to spend too much time and financial resources to convert the new infrastructure. +

  Concerning

• Equium A200 - Windows could not start after using another disc recovery

  Hi... my daughter accidentally ran his recovery disk for its Equium A100 into my laptop Equium A200, when I got home and started, I got the message
  ..
  > Windows cannot start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  Status: 0xc0000000f

  Info: The selected entry could not be loaded because the application is missing or damaged.
  ..
  I no longer my restore disk and cannot afford to replace it, is it an another sollution, I have a recovery/restore disk of the Symantec file lent by a friend, but am unsure if it is of no use, when I run it I get the message that there is no restore point and it's in a good way I'm using these things, it drives me crazy that this laptop as does a lot these days is not come with an OS disc (my OS is Vista Home Premium)... All help would welcome.

  Hello!

  That's why you used the recovery from another laptop disk and it won't work.
  I think you need the recovery disk for Equium A200 laptop.

  I n t have experience with Symantec recovery function but I can allows you to use a recovery disk Toshiba prefer. This contains all of the drivers and tools of Toshiba and so you can make sure that everything works after that.

  If your laptop comes with a recovery disk, contact the nearest ASP and request a new one.
  If your laptop with a recovery disk is not delivered, you can directly order a new a form Toshiba:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye