Equium A200 - startup after update problems

Similar Questions

• Equium A200 lagging after Bios Update

  Hello

  I have a question for an update.

  I have an Equium A200 - 1VO PSAF5E with Vista Home Premium and it would not work on lan... after that I tried every update driver there who did not help I saw an update to the bios, so I tried the bios one.

  Everything went well and it restarts when it restarts it lag (sticks) like crazy, I formatted and although he shifted after the restart installed during it sticks again every 3 seconds for a second about. Now when start of the crossbar for about three seconds, and glue the same as it does when the system starts finally.

  I got the update again and he ran again, but he said I had this version so that it wouldn't continue. I now have version 2.10.

  Is - it may be back to the version that did not have my laptop stick so or am that I stick with it like that until another flash of the bios is available?

  Thanks for any advice.

  PS something I noticed was when I tried to reinstall that it went well until it was at the stage end and rebooted, then it shifted, apparently not trolling before then on installation. Ive treid set shape and do it several times, but it happens at the same point and lagging even once (sticks).

  First of all I have to say that it of not possible to go back to BIOS version later because only the most recent BIOS is available on the European driver Toshiba page.
  I don't very well but eventually the Toshiba m authorized service provider would be able to downgrade the BIOS to the earlier version.

  However, the new BIOS that is found on the Toshiba age shouldn't t to worry.
  In your case I would recommend you first access the BIOS and set the defaults.

  I put t know if this can help, but a new installation of Vista OS could also be done. Upgrading from Vista, and then install all the patches.

• Mac pro hangs at startup after update to El Capitan

  TTITLE says it all.  Computer works only in start mode course now.  Was able to download and run EtreCheck in secure boot mode.  Results below.  Results of the last log less than kernel panic.  Can anyone help?

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-29 12:38:32

  Download https://etrecheck.com EtreCheck

  Time 02:08

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click the [details] links for more information on this line.

  Problem: The computer is restarted

  Description:

  Kernel panic causing the system to crash after update to El Capitan

  Hardware information: ⓘ

  Mac Pro (end 2013)

  [Technical details] - [User Guide] - [warranty & Service]

  Mac Pro - model: MacPro6, 1

  1 3.5 GHz 6-Core Intel Xeon CPU E5: 6 strands

  16 GB expandable RAM - [Instructions]

  DIMM1

  ok 4 GB ECC DDR3 1866 MHz

  DIMM2

  ok 4 GB ECC DDR3 1866 MHz

  DIMM3

  ok 4 GB ECC DDR3 1866 MHz

  DIMM4

  ok 4 GB ECC DDR3 1866 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en2: 802.11 a/b/g/n/ac

  Video information: ⓘ

  AMD over-pants D500 - VRAM: 3072 MB

  AMD over-pants D500 - VRAM: 3072 MB

  PA271W 2560 x 1440 @ 60 Hz

  System software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

  Disk information: ⓘ

  APPLE SSD SM0512F Disk0: (500,28 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 499,42 go-go (345,03 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  USB information: ⓘ

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Hub keyboard Apple, Inc.

  HP HP wireless KB and MS

  Apple Inc. Apple Keyboard

  FireWire information: ⓘ

  G-TECH G-DRIVE 400mbit - 800 max

  EFI (disk1s1) < not mounted >: 210 MB

  Backup of Volumes/NeonBunny NeonBunny Backup (disk1s2): 1.00 TB (187,87 GB free)

  Office backup HD (disk1s3) Volumes/Desktop HD backup: 999,72 go-go (406,82 free)

  G-TECH OEM ATA Device 00 800-800 max

  EFI (disk2s1) < not mounted >: 210 MB

  Time Machine (disk2s2) Volumes/Time Machine: 1,00 TB (562,63 GB free)

  Desktop Hard Drive (disk2s3) Volumes/Desktop Hard Drive: 999,52 go-go (406,55 free)

  Information crush: ⓘ

  Apple Inc. Thunderbolt_bus_2.

  Apple Inc. Thunderbolt_bus_1.

  Thunderbolt of Apple Inc. to FireWire adapter

  Apple Inc. Thunderbolt_bus_0.

  Configuration files: ⓘ

  / etc/hosts - Count: 22

  Goalkeeper: ⓘ

  Mac App Store and identified developers

  Kernel Extensions: ⓘ

  / Library/Extensions

  [no charge] jp.co.pioneer.driver.DJM - 900nexusAudio (1.4.0 - SDK 10.10 - 2016-06-25) [Support]

  [no charge] jp.co.roland.RDUSB017CDev (1.0.0 - SDK 10.9-2016-06-25) [Support]

  / System/Library/Extensions

  com.nvidia.CUDA [no charge] (1.1.0 - 2016-06-25) [Support]

  com.paceap.kext.pacesupport.master [no charge] (5.9 - 10.6 SDK - 2016-06-25) [Support]

  /System/Library/Extensions/PACESupportFamily.kext/contents/plugins

  com.paceap.kext.pacesupport.Leopard [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

  [no charge] com.paceap.kext.pacesupport.Panther (5.9 - SDK 10.-1-2012-07-11) [Support]

  com.paceap.kext.pacesupport.snowleopard [no charge] (5.9 - 10.6 SDK - 2012-07-11) [Support]

  com.paceap.kext.pacesupport.Tiger [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

  Launch system officers: ⓘ

  [loaded] 9 tasks Apple

  [loading] 163 tasks Apple

  [operation] 66 tasks Apple

  Demons of launch system: ⓘ

  com.Apple.watchdogd.plist [failure]

  [loaded] 44 tasks Apple

  [loading] 162 tasks Apple

  [operation] 84 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2015-06-23) [Support]

  com.extensis.FMCore.plist [no charge] (2016-06-26) [Support]

  com.Fortinet.FortiClient.fssoagent_launchagent.plist [no charge] (2015-01-16) [Support]

  com.nvidia.CUDASoftwareUpdate.plist [no charge] (2016-06-29) [Support]

  [no charge] com.oracle.java.Java - Updater.plist (2014-12-05) [Support]

  com.RealVNC.vncserver.PerUser.plist [no charge] (2014-04-01) [Support]

  com.RealVNC.vncserver.prelogin.plist [no charge] (2014-04-01) [Support]

  Launch of the demons: ⓘ

  [no charge]    PACESupport.plist (2012-07-11) [Support]

  com.adobe.SwitchBoard.plist [no charge] (2014-05-29) [Support]

  com.Adobe.fpsaud.plist [no charge] (2016-06-13) [Support]

  com.barebones.BBEdit.plist [no charge] (2014-06-19) [Support]

  com.Bombich.ccchelper.plist [no charge] (2016-06-25) [Support]

  com.CrashPlan.engine.plist [no charge] (2016-05-17) [Support]

  com.GoPro.stereomodestatus.plist [no charge] (2014-01-29) [Support]

  com.Microsoft.Office.licensing.helper.plist [no charge] (2011-03-10) [Support]

  com.nvidia.Cuda.Launcher.plist [no charge] (2014-11-05) [Support]

  [no charge] com.oracle.java.Helper - Tool.plist (2014-12-05) [Support]

  com.RealVNC.vncserver.plist [no charge] (2014-04-01) [Support]

  Other applications: ⓘ

  [ongoing] com.etresoft.EtreCheck.268512

  [ongoing] org.Mozilla.Firefox.251872

  [loading] 419 tasks Apple

  [operation] 158 tasks Apple

  Internet Plug-ins: ⓘ

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-06-23) [Support]

  FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-06-26) [Support]

  QuickTime Plugin: 7.7.3 (2016-05-04)

  AdobePDFViewerNPAPI: 11.0.04 - 10.6 SDK (07 / 07/2014) [Support]

  AdobePDFViewer: 11.0.04 - 10.6 SDK (07 / 07/2014) [Support]

  Flash Player: 22.0.0.192 - SDK 10.9 (2016-06-26) [Support]

  Default browser: 601 - SDK 10.11 (2016-05-04)

  SharePointBrowserPlugin: 14.4.3 - 10.6 SDK (2014 / 07 / 08) [Support]

  Silverlight: 5.1.41212.0 - SDK 10.6 (2016-05-03) [Support]

  JavaAppletPlugin: Java 8 73 02 version Check build update (06-02-2016)

  3rd party preference panes: ⓘ

  Preferences CUDA (2014-08-21) [Support]

  Flash Player (2016-06-13) [Support]

  GoPro (2014-06-01) [Support]

  Java (2016-02-06) [Support]

  TR-8 (2013-12-05) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 499,42 GB disc used: 154,39 GB

  Destinations:

  Time Machine [Local]

  Total size: 1.00 TB

  Total number of backups: 128

  An older backup: 29/05/14, 18:39

  Last backup: 29/06/16, 11:48

  Size of backup drive: adequate

  Backup size 1.00 TB > (disc 154,39 GB X 3)

  Top of page process CPU: ⓘ

  16% firefox

  2% WindowServer

  2% fontd

  0% kernel_task

  0% CVMCompiler (2)

  Top of the process of memory: ⓘ

  Kernel_task 755 MB

  Firefox 541 MB

  Softwareupdated 524 MB

  Sharingd 147 MB

  WindowServer 115 MB

  Information about virtual memory: ⓘ

  9,38 GB of free RAM

  6.61 GB used RAM (1.66 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  June 29, 2016, 12:33:17 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-123317_[redacted].panic [details]

  June 29, 2016, 12:32:38 self-test - spent

  June 29, 2016, 12:21:38 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-122138_[redacted].panic [details]

  June 29, 2016, 12:19:55 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-121955_[redacted].panic [details]

  June 29, 2016, 12:03:34 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-120334_[redacted].panic [details]

  June 29, 2016, 11:44:36 /Library/Logs/DiagnosticReports/backupd_2016-06-29-114436_[redacted].cpu_resour ce.diag [details]

  / System/Library/CoreServices/backupd. Bundle/happy/Resources/backupd

  June 29, 2016, 11:39:19 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-113919_[redacted].panic [details]

  June 29, 2016, 11:37:02 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-113702_[redacted].panic [details]

  June 29, 2016, 11:35:45 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-113545_[redacted].panic [details]

  June 29, 2016, 11:18:35 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-111835_[redacted].panic [details]

  June 29, 2016, 11:16:58 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-111658_[redacted].panic [details]

  June 28, 2016, 23:20:06 /Library/Logs/DiagnosticReports/CrashPlanService_2016-06-28-232006_[redacted].c pu_resource.diag [details]

  /Applications/CrashPlan.app/Contents/MacOS/crashplanservice

  June 28, 2016, 22:52:23 /Library/Logs/DiagnosticReports/Kernel_2016-06-28-225223_[redacted].panic [details]

  Anonymous UUID:

  D8BD978F-CE20-BC0E-9AE3-B2CAD98D978B

  Wed Jun 29 12:33:17 2016

  Panic report *.

  panic (cpu 0 0xffffff801ab04687 appellant): "hfs_swap_HFSPlusBTInternalNode: invalid key length catalogue #0 (3)\n"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.50.21/bsd/hfs/hfs_end ian.c:544 ".

  Backtrace (CPU 0), frame: return address

  0xffffff921ffeae10: 0xffffff801a6dab12

  0xffffff921ffeae90: 0xffffff801ab04687

  0xffffff921ffeaed0: 0xffffff801ab03473

  0xffffff921ffeaf20: 0xffffff801aaf3be7

  0xffffff921ffeaf50: 0xffffff801a931e3a

  0xffffff921ffeb060: 0xffffff801a9311de

  0xffffff921ffeb100: 0xffffff801a92f4bb

  0xffffff921ffeb170: 0xffffff801ab3159c

  0xffffff921ffeb1c0: 0xffffff801ab36967

  0xffffff921ffeb260: 0xffffff801ab14459

  0xffffff921ffeb980: 0xffffff801a92723e

  0xffffff921ffeba10: 0xffffff801ab849db

  0xffffff921ffebf60: 0xffffff801ac286a1

  0xffffff921ffebfb0: 0xffffff801a7ecc66

  The process corresponding to the current thread BSD name: mds_stores

  Mac OS version:

  15F34

  Kernel version:

  15.5.0 Darwin kernel version: kills Apr 19 18:36:36 PDT 2016; root:XNU-3248.50.21~8/RELEASE_X86_64

  Kernel UUID: 7E7B0822-D2DE-3B39-A7A5-77B40A668BC6

  Slide kernel:

  0x000000001a400000

  Text of core base: 0xffffff801a600000

  Text __HIB base: 0xffffff801a500000

  Name of system model: MacPro6, 1 (Mac-F60DEB81FF30ACF6)

  Availability of the system in nanoseconds: 40936714424

  last load kext to 4709008356: com.nvidia.CUDA 1.1.0 (addr 0xffffff7f9c684000 size 12288)

  kexts responsible:

  com.nvidia.CUDA 1.1.0

  com.paceap.kext.pacesupport.snowleopard 5.9

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AGPM 110.22.0

  com.apple.driver.X86PlatformShim 1.0.0

  com.apple.driver.ApplePlatformEnabler 2.6.0d0

  com.apple.driver.AppleOSXWatchdog 1

  3.12.7 com.apple.driver.AppleGraphicsDevicePolicy

  com Apple.Driver.pmtelemetry 1

  com.apple.driver.AppleHDAHardwareConfigDriver 274,9

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleHDA 274,9

  com.apple.kext.AMDFramebuffer 1.4.2

  com.apple.iokit.IOBluetoothSerialManager 4.4.5f3

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.AMDRadeonX4000 1.4.2

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.5f3

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.kext.AMD7000Controller 1.4.2

  3.12.8 com.apple.driver.AppleMGPUPowerControl

  com.apple.driver.AppleIntelMCEReporter 107

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.iokit.IOBluetoothUSBDFU 4.4.5f3

  com.apple.driver.AppleFireWireStorage 3.7.1

  com.apple.driver.initioFWBridge 3.7.1

  com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 3.7.1

  com.apple.driver.LSI_FW_500 3.7.1

  com.apple.driver.Oxford_Semi 3.7.1

  com.apple.driver.StorageLynx 3.7.1

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  com.apple.driver.AppleFWOHCI 5.5.4

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.iokit.AppleBCM5701Ethernet 10.2.0

  com.apple.driver.AirPort.Brcm4360 1040.1.1a6

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com Apple.kext.Triggers 1.0

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.driver.DspFuncLib 274,9

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSurface 108.2.1

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOAcceleratorFamily2 205,10

  com.apple.driver.CoreCaptureResponder 1

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.5f3

  com.apple.iokit.IOBluetoothFamily 4.4.5f3

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleHDAController 274,9

  com.apple.iokit.IOHDAFamily 274,9

  com.apple.iokit.IOAudioFamily 204.4

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.kext.AMDSupport 1.4.2

  3.12.8 com.apple.AppleGraphicsDeviceControl

  3.12.8 com.apple.driver.AppleGraphicsControl

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

  com.apple.driver.AppleHIDKeyboard 181

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.iokit.IOFireWireSBP2 4.2.7

  com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  4.6.1 com.apple.iokit.IOFireWireFamily

  com.apple.driver.AppleXsanScheme 3

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 6.0.2

  com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCI 1.0.1

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.iokit.IO80211Family 1110.26

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IOSMBusFamily 1.1

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.driver.AppleEFIRuntime 2.0

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417,4

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  com.apple.kec.Libm 1

  Hello

  com.paceap.kext.pacesupport.master [no charge] (5.9 - 10.6 SDK - 2016-06-25) [Support]

  /System/Library/Extensions/PACESupportFamily.kext/contents/plugins

  com.paceap.kext.pacesupport.Leopard [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

  [no charge] com.paceap.kext.pacesupport.Panther (5.9 - SDK 10.-1-2012-07-11) [Support]

  com.paceap.kext.pacesupport.snowleopard [no charge] (5.9 - 10.6 SDK - 2012-07-11) [Support]

  com.paceap.kext.pacesupport.Tiger [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

  Same here > kernel Panics extensions - part 3 - Uninstall...

• Equium A200 - gel/boot/loader problem

  Hello

  I have an Equium A200-1V0 with what I see is a common problem on many forums I find via google, but I can't find any solution for it.

  1. the laptop does not (No bios screen) when the charger is connected.
  2. it will normally start with the charger connected. However, the battery, even if the rest in charge, will deplete once vista started well. When I plug the charger then it freezes.

  I use an authentic charger. Any ideas? Don't you think it's just the battery? Or y at - it something on the map at the origin of this problem?

  Hello

  I think that in the first stage, the charger must be tested.
  I read a few threads in various forums and a user had a similar problem and could solve this in replacement AC adapter.

  But of course it is no guarantee that it would be a solution, you will need to test this

• Startup after update BIOS problems

  I recently updated my Alienware Aurora R4 for Windows 10, that satisfies me, but I noticed that my fans have been reallt strong during startup and shutdown, and I had to reset manually in my Alienware Command Center application which caused irritation, so after minimal research, I saw that one of the proposed fixed has been update BIOS I foolishly thought would be a quick easy thing to try, so I updated the BIOS version A7 to A11 day because I was not aware of the flashing, which I realize now, I should certainly have done. In any case, the update seems to work fine, no freezes or crashes and I just restarted my computer and stop was normal. When he started upward again if, instead of start properly, he showed a 10 windows screen that says: "your computer encountered a problem and needs to restart" with an error that says INACCESSIBLE_BOOT_DEVICE. When it has rebooted, I went into my BIOS settings and that he made sure that my the first boot device has been "hard drive" (I have two discs SSD, a HARD drive, but they have never caused me problems before and nothing has been fixed when I took out the HARD drive without windows on it). So far, I restarted a bunch of times and tried everything I can think of. Any help would be appreciated! Thank you

  simple tips I gave to a member of the forum the other day (it is possible that the bios update is back your settings to "default"):

  • Check your bios, game sata AHCI controller
  • set the boot device as HDD #1
  • others had the chance in the bios, go to 'legacy boot.
  • remove all external usb devices for now accept keyboard and mouse back.

  Dell/Alienware advice says to disable secure boot...

• EliteBook 8570w: the sound quality after update problem

  I connected the laptop to a docking station. The docking station has a connection to a headset/external amplifier. Ideal to connect the amplifier. Only in this respect has more no bass. The connection of the helmet of the computer laptop itself has a pleasant sound, but I do not like to keep card 10 x a day between headset and amp switching. (Phone + Amp = echo). My alarm only works with external stakeholders, but Skype and Softphone want the headset.

  Also, I turn off HP speakers in the system and have no more just the external headphones, since one of the most recent updates the internal speakers don't turn off when the headset is connected. This has implications for readers audio and video players, as they want their sounds through HP speakers. Only VLC mediaplayer has the possibility to move from one sound channel, but I have to change every time I start a video.

  Before the update, there was an automatic switch and I could let two of them on and the sound channel chose autamtically and turn to the helmet that was plugged, etc..

  I use Windows 7 64-bit and windows 10 is not an option due to various programs more alumni who should be updated (if it is still possible), which would be very expensive.

  I noticed something new has been installed called SRS Premium Sound Pro. Maybe it's the culprit. I dare not change anything in it.

  Does anyone know how to debug this?

  Hello

  Could update you the

  Driver Audio of IDT high definition (HD)

  Type:	-Audio driver
  Version:	6.10.6435.0; 5.10.6435.0(5 février 2013)
  System:	Microsoft Windows 7 Enterprise (64-bit) | See all
  Name of the file:	sp60317.exe (42 MB)

  Link: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5257503 & swItemId = ob_115135_1 & swEnvOid = 4060 #tab1

  Also, I suggest you to disable all the improvements in the properties of speakers and check out. See the steps below:

  1. Press on the key Windows + X.
  2. Click on Control Panel.
  3. Double-click the sound icon and click on speakers.
  4. Click on Properties.
  5. Click the enhancements tab.
  6. Now, click on "disable all sound effects.
  7. Click OK , and then check if the problem persists.

  If the problem still exists, as a solution, I suggest you uninstall and reinstall the sound drivers in compatibility mode and check if it works for you,. Refer to the steps below:

  Follow the steps to uninstall the audio driver:

  1. Press the Windows key + X key , and then click Device Manager.
  2. Expand 'Audio Video and Game Controllers'.
  3. Right-click on the audio device listed and click on 'Uninstall'.
  4. Select the option to remove the software driver.
  5. Restart the computer after its uninstalled.

  Now download the drivers from the manufacturer's Web site and install it in Windows 8.1 compatibility mode. Follow the steps below to install the drivers in compatibility mode:

  1. Right click on the driver configuration file and click on 'Properties'.
  2. Click on the "compatibility" tab and check the box ' run this program in compatibility mode for "and select operating system Windows 8.1 since the menu drop-down."
  3. Click 'Apply' and click on 'OK' and run the file to install it.

  Hope this helps you...

  Click on Bravo and accept as a Solution if my answer was helpful and answered your question.

  I am an employee of HP!

• IPad after update, problems with applications

  After the Ipad update to 9.1.2, we have a problem, whenever we are entering an App, emails, photos, etc., we lose the connection with the application. We will and simply press a button, then let's just out of the app again. We are unable to read the email, see photo etc. Anyone has a solution for this.

  In addition the application which is suppose to update, will not update

  Hello abcglad,

  If I understand correctly, you are able to open your apps, but what you do in them makes it insensitive so you press the Home button to exit the application, and then go back into it to make it work. This looks like a software issue to me, we should be able to solve. I would start by quit all applications running on your iPad. Normally, simply quit the application affected, but in this case because it seems to be all of them, I'd leave all.

  Force an app to close the iOS

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have finished that force the iPad to restart with the Home and Sleep/Wake buttons as described in the following article and the question again:

  iOS: switch off and on (restart) and reset
   
  If the problem persists, save your device in iTunes, then restore it like new and verify that it works.
   
  How to clear your iOS device and then set up as a new device or restore from backups

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself. Thank you for using communities of Apple Support, all the best!

• Equium A210-1AS - after update BIOS screen no longer works

  I tried to find the same problem but impossible.

  I had to reinstall Windows Vista after mistakes with programs (recovery was useless so install fress was necessary) and everything worked fine. I downloaded all the drivers and updates section of drivers Toshiba, I installed the ATI graphics driver, then update the BIOS.
  While the closed laptop, now when I turn it on, the fan on the works of graphics card, battery, power and load turns on but the screen remains off (not illuminated). I tried an external monitor and the same problem again. As the screen worked fine until the update im guessing its something that the BIOS has done, or the graphics update.

  TOSHIBA SATELLITE A210 - 1AS
  PSAFJE
  -AMD Turion 64 X 2 Dual-Core Mobile Technology TL-58-
  Genuine Windows® Vista® Home Premium edition-
  DVD Super Multi (Double Layer) drive-
  2 048 (1 024 + 1 024) MB of RAM DDR2 (667 MHz)-
  15.4 "TFT display 1280 x 800

  Thanks to all who can help.

  To me, it sounds like the update of the BIOS's not on your laptop. If the BIOS update fails more often than computer start doesn t more you can see anything on the screen but you can hear the fan, etc.

  In any case, you can try this workaround: remove the battery and the AC adapter. Wait an hour and then reconnect the two devices. Now try to start Notepad and hope this works ;)

  If it doesn't work, you should contact the nearest authorized service provider. Technicians can try to reflash the ROM module

  Good luck!

• Laptop HP 15-af122no: crash at startup after update driver AMD

  I bought my computer on February 2016, so it is quite new. There are 10 Windows ready and recently it has been upgraded. My internet connection LAN, no problems with that.

  Yesterday an automatic detection of AMD system informed me that my drivers need to be modernised and I gave her permission to upgrade, maybe that has been my biggest fault... After that I needed to restart the system, and I did. The computer started showing strange texts on the screen, I remember that one word from him, it was at the end of the first line: "watchdog". After that the text of HP showed and freezes on the screen. I tried to start the second time, the result was the same. Third time the texts initially showed no more, but the start crashed on HP display.

  I am now on a computer it's not me and I tried to get help for this problem to the Support HP Finland, since I can't use HP Support Assistant on my HP. I found a few tips I've tried:

  -J' removed the battery and the power cord, but it did not help

  -After starting the computer, I pressed ESC several times to get in safe mode. Finally I got to a mode where I could enter a few commands (unfortunately I do not remember more..), but it does not give me the result I was expecting (and said what page of support must be the result). The computer said that it does not find these batch files requested.

  I'm really sad that I have had no money to buy a proper memory stick or cd to make the stick recovery or discs... NOW, they may be needed.

  I've been thinking about resetting the computer, but there could be some risk, too... Please, please, help me, I don't know what to do anymore. I hope you find a solution to solve this problem, thank you already!

  Hi there @Troublefinder,

  Thank you for joining the Forums HP's Support and welcome! You have just a great place to ask questions, find solutions and get help from others in the community. I understand that once you had done a update driver and recently upgraded to level to Windows 10, now your HP for laptop - 15-af122no (ENERGY STAR) is not allowing you to start correctly.

  Please note , remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Are you blocking upward at the HP Logo?

  Have you tried a hard reset?

  Have you tried to Test for hardware failures?

  Are - that you receive error messages or error codes?

  You happen to see a blue screen to choose an Option at all?

  If the computer hangs at the HP logo screen, try to clean the vents from the computer to the air and then restarting the laptop.

  Follow these steps to remove and reinsert the memory modules for troubleshooting:

• STARTUP AFTER UPDATE REPAIR

  I installed the update of windows the other day, and when I opened my laptop (vista 32-bit), it does not start.

  Startup Repair still fails and
  gives me this report:

  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature problem 03:3
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: NoRootCause
  Signature of the problem 07:0
  Signature problem 08:2
  Signature of the problem 09: WrpRepair
  Signature of the 10:1168 problem
  OS version: 6.0.6001.2.1.1.0.256.1
  Locale ID: 1033

  my laptop only run when I use the LAST GOOD CONFIGURATION and safe mode, I can't start it normally, please help me I don't know what to do. I tried the system restore.

  See the post marked as ANSWER in this thread: http://social.answers.microsoft.com/forums/en-us/vistarepair/thread/8F6ACCDA-2098-4179-BD88-1AEBCD536A7B

  If you need help, please start your own, new thread in the same pregnant (e.g., http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads).

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• W3 blocked at startup after update failed

  Hello

  I just bought an Iconia W3 810 today, after setting up and the Microsoft account I had to install 108 updates. Once they are all downloaded en installed had to reload. The new update Setup has failed and now everytime I try to start it displays a message indicating an error in configuration of the windows updates and it attempts to undo the changes. It was stuck on this during the hours, and when I put the boot order to boot the recovery disc from Acer it will boot the drive, but usually returns to the factory because of a bad disc settings. (I tried two DVDs of 1 or 2 in a powered external usb dvd drive) I have no way to start the tablet or change anything now. Is there a way to solve this problem or do I have to return it to the store and get a refund?

  Hello, if it were a disk you will need accessories. Provided that the Windows installation, Windows will not drivers necessary for your tablet. I would try the Acer support chat option or if you have this option to return. If you do some research here in this forum, you will find a lot of people trying to change the way in which the Tablet is from the factory. But not a lot of success.

• Lightroom crashes on startup after update 2014

  I installed the new updated Lightroom 2014, as well as the PS CC 2014 and bridge. PS and bridge work correctly, but LR crashes at startup. Briefly, I see the splash screen and logo and then it disappeared.

  I tried to wipe and reinstall LR, but the problem persists. What should I do?

  Greetings,

  Mauro

  https://helpx.Adobe.com/Lightroom/KB/unable-launch-Lightroom-55.html

• Windows XP hangs on startup after update 2.0.2.

  Hi, I am a new user of Vmware Fusion (or Mac for that matter) so if you think that my problem happened to be quite some pretty stupid mistakes on my part.

  Tuesday, I just noticed that the update to version 2.0.2 and downloaded at short notice. The program wasn't on my Windows XP has been suspended, and I made the mistake of not the have stopped even if it has been suspended. I install the new update without problem, but when I restart my computer and turn it on... Well that's the point that I realized that my windows account is always logged. I noticed that he was waiting to load something, the pointer is an hourglass. But it not let me restart my computer regularly. But once it starts, it freezes on the loading screen windows. Not sure what to do, I'm forced to reboot through the merger of WMware toolbar command. He now says he needs to check a large number of files truncates the files on it, but during the process. It happened pretty fast so I have not heard what it was, but after that, he reached an error and blue screen and tries to restart. At this stage let load normally just gives the same error message, and if I go to safe mode, it just freezes. I noticed that avast trying to do something before the error message. See the attached screenshots for what I mean.

  He also tells me that VMware Tools is not updated, but when I try to update, it doesn't really do anything. I don't think it would work until she starts toward the top right (that I can't do). and unfortunately, I was not smart enough to have a backup of my desktop files (which I need), nor has the Snapshot function before my problem.

  There is a simple problem that solves that I'm not aware of the problem?

  If not, will reinstall the fix (assuming it will work directly in my new v2.0.2)?

  If I reinstall it, is there a way to access the files on Windows XP through my Mac OSX? I can't of course through the Wmware Fusion.

  I'm sorry that if this is not the right place to ask about this, I was directed here through the support for the view part after watching a response.

  There are several thing you can try and basically the same things as if it were a physical machine as the boot with the XP install CD / ISO Image and either use the Recovery Console to repair the registry or do a repair install, but the first thing first of all try to mount the virtual hard drive and retrieve your user data , then, first of all make a backup of the entire Virtual Machine assuming that it is a normal base file Virtual Machine and the Boot Camp partition.

  Take a look at: VMware Fusion (menu bar) > help > VMware Fusion help > managing Virtual Machines > VMDKMounter to help mount a virtual drive as a Mac Volume

  Note: If VMDKMounter is mounted with success you will be unwise and a titled Untitled white drive icon should appear on your desktop.

  Also use VMDKMounter with the Virtual Machine, not suspended and merger shutdown closed...

• Firefox crashes on startup after update

  After the latest Automatic update, Firefox crashes whenever I start it. Uninstalled it, downloaded the fresh installation files, installed these - even of the accidents.

  Hello markusrex, this seems to be quite prolific start at this time crash. other affected users have reported that it is solvable by a clean reinstall:

  1. Please try to uninstall firefox from the system control panel.
  2. then go to the firefox program folder (usually located in C:\Program Files (x 86) \Mozilla Firefox)-remove the entire program folder firefox manually
  3. try reinstalling the browser with a new copy of https://www.mozilla.org/firefox/all/

• Satellite C50B freezes at startup after update BIOS to 5.10

  Hello
  I updated the BIOS of my Satellite C50 - B - 14 d (PSCMLE) to 5.10 (a final release early sept. 2015).
  The update succeeded, and the laptop runs as long as I do not install the drivers for the card WiFi (Atheros AR9485).
  If I try to install the driver (it does not matter which, those of the Toshiba website or those of the manufacturer, of), the laptop crashes before the end of the installer.
  Installing drivers from Device Manager makes the laptop freeze on when Windows starts (I tried 7, 8.1, and 10).
  Completely on the Windows logo screen it freezes, and I have to turn off it.

  In addition, the wired network adapter is not detected (it does not appear in Device Manager).
  The same question is described here (http://www.eightforums.com/general-s...ses-start.html), but no solution.

  Any suggestion? The BIOS may be downgraded? The BIOS update utility does not Flash an older version.

  Thank you!

  Hi indutry,

  I also have exactly the same problem since updating my BIOS to 5.10 with my Toshiba C50 - B - 14 d PSC MLE

  I have to start windows in safe mode without network to disable the Atheros AR9485 before restarting again in normal mode.
  I now have to use an external WiFi adapter as my LAN port is now also lack!

  Upset that the BIOS update has broken all my embedded network on the laptop.

  I tried to update the Atheros drivers to the latest version, but as soon as the device is turned on again the system crashes and we're back to square one.

  There is no solution that I can find other than turning off the unit and live without built in WiFi + LAN.

  I hope Toshiba can be remedied with a new BIOS update?