Equium A210-1AS - after update BIOS screen no longer works

Similar Questions

• Satellite L300 - 26K - after update BIOS touchpad no longer works

  Hello

  as recommended by tempro, I have updated the BIOS to the version 2.1 to 2.2 (windows). After the reboot, incl. touchpad. doesn´t advice working. In the bios, touchpad is enabled in the system, it said unit works correctly. FN/F9 does no effect. Reinstall the synaptics - no effect - drivers still dead.

  Satellite L300 - 26K
  Using Vista 32-bit home

  How can I restore BIOS to 2.1 again? (if I try the V2.1 windows-bios utility he says that it is always installed - so I can't downgrade by this easy way)

  Please help - I need my laptop without external mouse (this works)

  your

  Oliver

  Post edited by: enigmo

  Hi enigmo,.

  I can t imagine this happening due to the update of the BIOS. Have you tried to reinstall Windows using the Toshiba Recovery disk?

  This BIOS downgrade is possible only to an authorized service. Technicians can install all versions because they have these special tools to do a downgrade.

  On the Toshiba site, you can find a list of them. Just give the guy and ask for it. They will help you! :)

• Equium A210-1AS - cannot update windows Vista

  Hello

  I have about a new A210-1AS Equium with Vista on it. I could not update the OS and Im having the same problem with norton 2007

  Did you get any error messages?
  What s wrong exactly?

  Maybe your firewall doesn't allow updates?

• Satellite A210-199 - after updating BIOS only seeing yellow on

  Hi all, help is needed.

  After a BIOS updated with the help of Toshiba TEMPRO laptop Satellite A210-199 stopped working. The updated spent normally, but when it was turned off is more responsible. All this time the yellow indicator Burns power only. In a few minutes a laptop trying overloaded, but has no outside effect and so constantly.

  How is it possible to correct?

  Hello

  Well, it seems that the BIOS update has failed or something else. Maybe the ROM module must be reflashed by a technician of the laptop.

  But you can try this workaround first:
  Remove the battery and the AC adapter and wait an hour. Then reconnect both devices and try to start the laptop.

  If it doesn t work on the Toshiba site, you can search for nearest authorized maintainer:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!

• Qosmio F50 - after update BIOS Bluetooth does not work anymore

  I need to update BIOS and F50 v 2.20.

  After update Bluetooth stopped working. Bluetooth in the taskbar icon turned red and I couldn't use any bluetooth device. I got my comp. 3 times to factory State, nothing has changed. After that I uninstalled the bluetooth stack, when I re install the installation crashes and now there is no icon in the taskbar and no link in Control Panel.
  I've tried everything.

  Need some professional help. My computer is only 2 months old.
  I am very angry.

  There is a new version of battery available Bluetooth.
  http://APS2.toshiba-tro.de/Bluetooth/?page=download

  But before install you it I recommend to remove the old battery installation BT.
  After removing the battery of BT, reboot the laptop and follow the BT facility.

  Installation should finish correctly and then you can activate using the FN + F8 keys.

  Should work.

• Equium A60-173 - after update BIOS not boot

  Hi, I have a Toshiba Equium A60 - 173 running Windows XP.

  I just tried to update the BIOS and everything was fine until it stops and does not turn on. I waited and waited and then it turned on myself. The result is a black screen or maybe even screen does not turn on. I left it for about 5 minutes then thought that he had crashed then tried to put out of service to restart. The power button does not respond so I left a little longer, then removed the battery)

  Now, the laptop does not start, I press the power button and get: beeeep beeeep beep beep then it shuts off: S
  I'm lost and I hope that I didn't destroy my girlfriends laptop!

  Any help or tips/steps very appreciated!

  Thank you

  Hello

  Unfortunately, if the BIOS update fails you can do nothing because the ROM module needs to be reflashed to a technician for laptop

  If you need to contact a service partner in your country and ask for help. Guys can you help get rid me of this.

• After updates, access samba no longer works.

  After Windows update has installed a security update: KB2536276, I can't access shares samba (Version 1.9)

  I can access is no longer shared Unix via- or already drives mapped.

  Errors:
  "Year error occurred while reconnecting to <\\name\share>.
  "Microsoft Windows network: the local device name is already in use.
  "The connection has not been restored."

  and

  "The mapped network drive could not be created because the following error has occurred."
  "The specified server cannot perform the requested operation".

  I found that with Samba version 1.9.16(c), the KB2536276 of broken Windows communication with Samba security update.

  The temporary solution was to uninstall the update... the more permanent solution was upgraded to Samba to version 3.x.x

  http://support.Microsoft.com/kb/2536276

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Equium A210-1AS - it gets hot after BIOS update

  Hey, I was wondering if anyone can help here...

  Currently have a Toshiba Equium A210-1AS with BIOS version 1.80 worm 1.00PARTTBL 08/04/2008.

  Given that BIOS has been updated for a long time in this version 1.80 the computer became hot very quickly and therefore the laptop performance declined.
  I looked on the Toshiba support site and upgrade only version 2.00 was not compatible with this laptop.

  Any help would be greatly appreciated. Short model number is PSAFJE
  Thank you

  Hello

  I checked the site Web of Toshiba and I didn't see any BIOS update for satellite A210 PSAFJE. This means that an update of the BIOS was never marketed for this laptop, normally.

  To me it sounds like that you have updated the BIOS with one version for another Equium A210. So, you should go to an authorized service provider. Technicians can install the right version of BIOS for you (downgrade).

  Good bye

• Equium A210-1as turns off during the Bios flash

  Hello group,

  My computer laptop girls off for a flash bios because of blocked fan (dog hairs dust etc.) and its fried bios chip.
  I think that there is a partition on the Bios chip which can upgrade the bios in a critical state of flash using combinations of keys.

  I tried all of this and have a laptop dead yet.
  I contacted someone on the net that sells preloaded Bios chips and instructions to replace them, but I must first of all identify the chip on the card.
  Is there any reading that can identify it for me on a toshiba Equium A210-1as... psafje-005005ks

  Thanks for any help Paul G...

  Hi mate

  Usually it s is not necessary to replace the BIOS ROM chip on the motherboard.
  In most cases, the ROM module has to be reflashed again.
  It seems that the module ROM was not properly flashed and the process interrupted
  The technician of the ASP can reflash the module using a disc of the BIOS crisis.

  I recommend you to get in touch with the guys from the ASP in your country and ask reflash BIOSES.

  Good luck

• Re: Equium A210-1AS - blue screen and cannot start

  My computer was working fine, I stopped him, the next time I start up, it shows windows loading screen, then a second a blue screen flashes by, it restarts and repeats, I stopped and began to tap F8 until the advanced boot options appears, safemode ect... None of them work and lead all the blue screen If I select the repair option at the top 'Repair your computer' it begins to load with a background of vista and a cursor and then displays the error "the installed program cannot start. Click OK to turn off the computer. »

  in Advanced Startup Options that I try "disable automatic restart in the event of system failure" and the rest of the blue screen to the top, so I can see, it shows an error on usual blue screen, read:

  UNMOUNTABLE_BOOT_VOLUME
  STOP: 0X000000ED (0X85DDA600, 0 X 0000000, 0XC000009C, 0 X 0000000)

  I don't have a recovery CD, as I believe, there is a recovery partition, but I don't know how to access it-
  I use Equium A210-1AS
  Part number: PSAFJE-005005KS
  Windows vista 32 bit

  Thank you

  I know know that the recovery partition is consulted theough 'Repair your computer' but shows just "the installed program cannot start. Click OK to turn off the computer. »  :/

  null

  > I don't have a recovery CD as I believe, there is a recovery partition, but I don't know how to access to this

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

• Equium A210-1AS: Touchpad problem - the mouse becomes unusable

  Hello

  I have problems with the touchpad of my laptop Equium A210-1AS.
  After some time of use of the mouse becomes unusable and just starts bouncing around the screen and becomes uncontrollable.

  The only solution then is to unplug the laptop and turn the power off, re start the touchpad works again.

  I use Windows Vista and downloaded the latest touchpad drivers.

  Any help would be appreciated.

  See you soon
  Widdy1961

  This problem very strange s.
  Could you please tell me if this problem occurs after you reinstall the OS from the Toshiba Recovery CD?
  I read on several forums of Vista that some Microsoft Vista updates may have a bad influence on the touchpad driver
  Therefore, it would be very interesting to know if this problem appears immediately after the use of the recovery CD.

  Greetings

• Equium A210-1AS sometimes stops

  My recently purchased Equium A210-1AS sometimes completely cut and the screen is blank. Someone knows why?

  Maybe a little better explanation of the problem can help to better understand what's happening exactly and how many times.

• Equium A210-1AS: Windows unexpectedI/Oerror bootmanager status took place

  Hi everyone, I really hope there, can someone help me today!
  My daughter is in the middle of her GCSE exams and has a problem with its Equium A210 - 1AS.

  It was working fine until last night and now all she gets while booting is:

  "Boot Windows display manager".
  Windows has encountered a problem communicating with a device connected to your computer.

  Thiserror can be caused by unplugging a removable storage device, such as an external USB drive while the appliance is in use, or by faulty hardware such as a hard drive or CD ROM drive which is a failure.
  Make sure that all removable storage is properly connected, and then restart your computer.

  If you continue to receive this error message, contact the manufacturer of the equipment.

  File: \Boot\BCD
  Info: An unexpected i/o error has occurred.
  ENTER = continue»

  She said she had her sex cam plugged and I tried to restart and reconnected, but this has not solved the problem.

  There, can someone help me please because we are desperate to work on his pc!

  Thanks a lot if you can.

  Kind regards
  A

  Hello

  > She says she had her sex cam plugged and I tried to restart and reconnected, but this did not solve the problem

  Is this means that the laptop can not boot Windows OS?
  Please disconnect any external devices. Then switch on and press F8.
  Now you should see the advanced boot menu.
  Please check if you start the machine in safe mode.

  Otherwise I recommend the BIOS.
  Ensure that the HARD drive has been recognized by the BIOS.
  If there is just no drive listed then the HARD drive could malfunctions.
  If the HARD drive is there, so you must set it as first boot device.

  If anything would help him, then a system restore would be desirable.

• A few problems with my Equium A210-1AS

  OK, having some problems with my Equium A210-1AS and if all goes well there's a simple answer that someone here will know...

  First of all how hot is the laptop supposed to get... Mine seems to get the point where it is bad uncomfortable typing as the areas around the mouse pad plastic get really hot and the underside of the laptop is very hot, too... but this is crazy as the system itself was never to the point of crashing or anything through heat... Well well not that i know of anyway.

  The second question that I met while surfing on the net as is every now and then it seems the internet just completely dies and is loading not pages... It's the same thing on Internet explore, firefox and chrome! None of them will display websites - and that's with or without firewalls - it get just halfway through the loading status bit bar and you're nothing... If I close one of internet browsers and try and open them again he won't let me as I said there is still a version running... and when I go in the Manager of tasks, there is nothing in the window but the browser process is still running under the tab process... and no mater how many times you click it and end the process there is always there... The only way I can get rid of it or get the internet is to make a hard re-boot... which seems to take forever to shutdown before restarting (or quckily if I hold down the power button, but I do not do that!)

  Get IT is really annoying! as it is not within the time limits or any of some websites that I can pin point... It is randomly... sometimes as fast as 5 minutes... Other times, it can go more than 8 hours and stay working...

  It is not the router connection or by phone if my desktop machine works no stop without problem as do other cell phones in the House... It's just what seems to be the problem.

  Computer laptop im wise under a Toshiba A210-1AS with Windows Vista Home Premium service pack 1...

  So any ideas what could be the problem or, more importantly, a solution!

  On the first problem: I would like to clean the fan. Do not disassemble the laptop. Use the jet of compressed air and could blow the dust from the cooling fans.
  If you have any success with this tip, I would go to a local ASP. They should check your laptop.

  For the second question I would first do a driver update from the LAN or WLAN. Furthermore, this type of connection you are using?
  If you use WLAN make you the laptop and the router uses the same standard. In addition, the intensity of the signal should be good or very good.

  Tell me what happened.