STARTUP AFTER UPDATE REPAIR

Similar Questions

• Mac pro hangs at startup after update to El Capitan

  TTITLE says it all.  Computer works only in start mode course now.  Was able to download and run EtreCheck in secure boot mode.  Results below.  Results of the last log less than kernel panic.  Can anyone help?

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-29 12:38:32

  Download https://etrecheck.com EtreCheck

  Time 02:08

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click the [details] links for more information on this line.

  Problem: The computer is restarted

  Description:

  Kernel panic causing the system to crash after update to El Capitan

  Hardware information: ⓘ

  Mac Pro (end 2013)

  [Technical details] - [User Guide] - [warranty & Service]

  Mac Pro - model: MacPro6, 1

  1 3.5 GHz 6-Core Intel Xeon CPU E5: 6 strands

  16 GB expandable RAM - [Instructions]

  DIMM1

  ok 4 GB ECC DDR3 1866 MHz

  DIMM2

  ok 4 GB ECC DDR3 1866 MHz

  DIMM3

  ok 4 GB ECC DDR3 1866 MHz

  DIMM4

  ok 4 GB ECC DDR3 1866 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en2: 802.11 a/b/g/n/ac

  Video information: ⓘ

  AMD over-pants D500 - VRAM: 3072 MB

  AMD over-pants D500 - VRAM: 3072 MB

  PA271W 2560 x 1440 @ 60 Hz

  System software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

  Disk information: ⓘ

  APPLE SSD SM0512F Disk0: (500,28 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 499,42 go-go (345,03 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  USB information: ⓘ

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Hub keyboard Apple, Inc.

  HP HP wireless KB and MS

  Apple Inc. Apple Keyboard

  FireWire information: ⓘ

  G-TECH G-DRIVE 400mbit - 800 max

  EFI (disk1s1) < not mounted >: 210 MB

  Backup of Volumes/NeonBunny NeonBunny Backup (disk1s2): 1.00 TB (187,87 GB free)

  Office backup HD (disk1s3) Volumes/Desktop HD backup: 999,72 go-go (406,82 free)

  G-TECH OEM ATA Device 00 800-800 max

  EFI (disk2s1) < not mounted >: 210 MB

  Time Machine (disk2s2) Volumes/Time Machine: 1,00 TB (562,63 GB free)

  Desktop Hard Drive (disk2s3) Volumes/Desktop Hard Drive: 999,52 go-go (406,55 free)

  Information crush: ⓘ

  Apple Inc. Thunderbolt_bus_2.

  Apple Inc. Thunderbolt_bus_1.

  Thunderbolt of Apple Inc. to FireWire adapter

  Apple Inc. Thunderbolt_bus_0.

  Configuration files: ⓘ

  / etc/hosts - Count: 22

  Goalkeeper: ⓘ

  Mac App Store and identified developers

  Kernel Extensions: ⓘ

  / Library/Extensions

  [no charge] jp.co.pioneer.driver.DJM - 900nexusAudio (1.4.0 - SDK 10.10 - 2016-06-25) [Support]

  [no charge] jp.co.roland.RDUSB017CDev (1.0.0 - SDK 10.9-2016-06-25) [Support]

  / System/Library/Extensions

  com.nvidia.CUDA [no charge] (1.1.0 - 2016-06-25) [Support]

  com.paceap.kext.pacesupport.master [no charge] (5.9 - 10.6 SDK - 2016-06-25) [Support]

  /System/Library/Extensions/PACESupportFamily.kext/contents/plugins

  com.paceap.kext.pacesupport.Leopard [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

  [no charge] com.paceap.kext.pacesupport.Panther (5.9 - SDK 10.-1-2012-07-11) [Support]

  com.paceap.kext.pacesupport.snowleopard [no charge] (5.9 - 10.6 SDK - 2012-07-11) [Support]

  com.paceap.kext.pacesupport.Tiger [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

  Launch system officers: ⓘ

  [loaded] 9 tasks Apple

  [loading] 163 tasks Apple

  [operation] 66 tasks Apple

  Demons of launch system: ⓘ

  com.Apple.watchdogd.plist [failure]

  [loaded] 44 tasks Apple

  [loading] 162 tasks Apple

  [operation] 84 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2015-06-23) [Support]

  com.extensis.FMCore.plist [no charge] (2016-06-26) [Support]

  com.Fortinet.FortiClient.fssoagent_launchagent.plist [no charge] (2015-01-16) [Support]

  com.nvidia.CUDASoftwareUpdate.plist [no charge] (2016-06-29) [Support]

  [no charge] com.oracle.java.Java - Updater.plist (2014-12-05) [Support]

  com.RealVNC.vncserver.PerUser.plist [no charge] (2014-04-01) [Support]

  com.RealVNC.vncserver.prelogin.plist [no charge] (2014-04-01) [Support]

  Launch of the demons: ⓘ

  [no charge]    PACESupport.plist (2012-07-11) [Support]

  com.adobe.SwitchBoard.plist [no charge] (2014-05-29) [Support]

  com.Adobe.fpsaud.plist [no charge] (2016-06-13) [Support]

  com.barebones.BBEdit.plist [no charge] (2014-06-19) [Support]

  com.Bombich.ccchelper.plist [no charge] (2016-06-25) [Support]

  com.CrashPlan.engine.plist [no charge] (2016-05-17) [Support]

  com.GoPro.stereomodestatus.plist [no charge] (2014-01-29) [Support]

  com.Microsoft.Office.licensing.helper.plist [no charge] (2011-03-10) [Support]

  com.nvidia.Cuda.Launcher.plist [no charge] (2014-11-05) [Support]

  [no charge] com.oracle.java.Helper - Tool.plist (2014-12-05) [Support]

  com.RealVNC.vncserver.plist [no charge] (2014-04-01) [Support]

  Other applications: ⓘ

  [ongoing] com.etresoft.EtreCheck.268512

  [ongoing] org.Mozilla.Firefox.251872

  [loading] 419 tasks Apple

  [operation] 158 tasks Apple

  Internet Plug-ins: ⓘ

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-06-23) [Support]

  FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-06-26) [Support]

  QuickTime Plugin: 7.7.3 (2016-05-04)

  AdobePDFViewerNPAPI: 11.0.04 - 10.6 SDK (07 / 07/2014) [Support]

  AdobePDFViewer: 11.0.04 - 10.6 SDK (07 / 07/2014) [Support]

  Flash Player: 22.0.0.192 - SDK 10.9 (2016-06-26) [Support]

  Default browser: 601 - SDK 10.11 (2016-05-04)

  SharePointBrowserPlugin: 14.4.3 - 10.6 SDK (2014 / 07 / 08) [Support]

  Silverlight: 5.1.41212.0 - SDK 10.6 (2016-05-03) [Support]

  JavaAppletPlugin: Java 8 73 02 version Check build update (06-02-2016)

  3rd party preference panes: ⓘ

  Preferences CUDA (2014-08-21) [Support]

  Flash Player (2016-06-13) [Support]

  GoPro (2014-06-01) [Support]

  Java (2016-02-06) [Support]

  TR-8 (2013-12-05) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 499,42 GB disc used: 154,39 GB

  Destinations:

  Time Machine [Local]

  Total size: 1.00 TB

  Total number of backups: 128

  An older backup: 29/05/14, 18:39

  Last backup: 29/06/16, 11:48

  Size of backup drive: adequate

  Backup size 1.00 TB > (disc 154,39 GB X 3)

  Top of page process CPU: ⓘ

  16% firefox

  2% WindowServer

  2% fontd

  0% kernel_task

  0% CVMCompiler (2)

  Top of the process of memory: ⓘ

  Kernel_task 755 MB

  Firefox 541 MB

  Softwareupdated 524 MB

  Sharingd 147 MB

  WindowServer 115 MB

  Information about virtual memory: ⓘ

  9,38 GB of free RAM

  6.61 GB used RAM (1.66 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  June 29, 2016, 12:33:17 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-123317_[redacted].panic [details]

  June 29, 2016, 12:32:38 self-test - spent

  June 29, 2016, 12:21:38 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-122138_[redacted].panic [details]

  June 29, 2016, 12:19:55 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-121955_[redacted].panic [details]

  June 29, 2016, 12:03:34 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-120334_[redacted].panic [details]

  June 29, 2016, 11:44:36 /Library/Logs/DiagnosticReports/backupd_2016-06-29-114436_[redacted].cpu_resour ce.diag [details]

  / System/Library/CoreServices/backupd. Bundle/happy/Resources/backupd

  June 29, 2016, 11:39:19 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-113919_[redacted].panic [details]

  June 29, 2016, 11:37:02 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-113702_[redacted].panic [details]

  June 29, 2016, 11:35:45 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-113545_[redacted].panic [details]

  June 29, 2016, 11:18:35 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-111835_[redacted].panic [details]

  June 29, 2016, 11:16:58 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-111658_[redacted].panic [details]

  June 28, 2016, 23:20:06 /Library/Logs/DiagnosticReports/CrashPlanService_2016-06-28-232006_[redacted].c pu_resource.diag [details]

  /Applications/CrashPlan.app/Contents/MacOS/crashplanservice

  June 28, 2016, 22:52:23 /Library/Logs/DiagnosticReports/Kernel_2016-06-28-225223_[redacted].panic [details]

  Anonymous UUID:

  D8BD978F-CE20-BC0E-9AE3-B2CAD98D978B

  Wed Jun 29 12:33:17 2016

  Panic report *.

  panic (cpu 0 0xffffff801ab04687 appellant): "hfs_swap_HFSPlusBTInternalNode: invalid key length catalogue #0 (3)\n"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.50.21/bsd/hfs/hfs_end ian.c:544 ".

  Backtrace (CPU 0), frame: return address

  0xffffff921ffeae10: 0xffffff801a6dab12

  0xffffff921ffeae90: 0xffffff801ab04687

  0xffffff921ffeaed0: 0xffffff801ab03473

  0xffffff921ffeaf20: 0xffffff801aaf3be7

  0xffffff921ffeaf50: 0xffffff801a931e3a

  0xffffff921ffeb060: 0xffffff801a9311de

  0xffffff921ffeb100: 0xffffff801a92f4bb

  0xffffff921ffeb170: 0xffffff801ab3159c

  0xffffff921ffeb1c0: 0xffffff801ab36967

  0xffffff921ffeb260: 0xffffff801ab14459

  0xffffff921ffeb980: 0xffffff801a92723e

  0xffffff921ffeba10: 0xffffff801ab849db

  0xffffff921ffebf60: 0xffffff801ac286a1

  0xffffff921ffebfb0: 0xffffff801a7ecc66

  The process corresponding to the current thread BSD name: mds_stores

  Mac OS version:

  15F34

  Kernel version:

  15.5.0 Darwin kernel version: kills Apr 19 18:36:36 PDT 2016; root:XNU-3248.50.21~8/RELEASE_X86_64

  Kernel UUID: 7E7B0822-D2DE-3B39-A7A5-77B40A668BC6

  Slide kernel:

  0x000000001a400000

  Text of core base: 0xffffff801a600000

  Text __HIB base: 0xffffff801a500000

  Name of system model: MacPro6, 1 (Mac-F60DEB81FF30ACF6)

  Availability of the system in nanoseconds: 40936714424

  last load kext to 4709008356: com.nvidia.CUDA 1.1.0 (addr 0xffffff7f9c684000 size 12288)

  kexts responsible:

  com.nvidia.CUDA 1.1.0

  com.paceap.kext.pacesupport.snowleopard 5.9

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AGPM 110.22.0

  com.apple.driver.X86PlatformShim 1.0.0

  com.apple.driver.ApplePlatformEnabler 2.6.0d0

  com.apple.driver.AppleOSXWatchdog 1

  3.12.7 com.apple.driver.AppleGraphicsDevicePolicy

  com Apple.Driver.pmtelemetry 1

  com.apple.driver.AppleHDAHardwareConfigDriver 274,9

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleHDA 274,9

  com.apple.kext.AMDFramebuffer 1.4.2

  com.apple.iokit.IOBluetoothSerialManager 4.4.5f3

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.AMDRadeonX4000 1.4.2

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.5f3

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.kext.AMD7000Controller 1.4.2

  3.12.8 com.apple.driver.AppleMGPUPowerControl

  com.apple.driver.AppleIntelMCEReporter 107

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.iokit.IOBluetoothUSBDFU 4.4.5f3

  com.apple.driver.AppleFireWireStorage 3.7.1

  com.apple.driver.initioFWBridge 3.7.1

  com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 3.7.1

  com.apple.driver.LSI_FW_500 3.7.1

  com.apple.driver.Oxford_Semi 3.7.1

  com.apple.driver.StorageLynx 3.7.1

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  com.apple.driver.AppleFWOHCI 5.5.4

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.iokit.AppleBCM5701Ethernet 10.2.0

  com.apple.driver.AirPort.Brcm4360 1040.1.1a6

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com Apple.kext.Triggers 1.0

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.driver.DspFuncLib 274,9

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSurface 108.2.1

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOAcceleratorFamily2 205,10

  com.apple.driver.CoreCaptureResponder 1

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.5f3

  com.apple.iokit.IOBluetoothFamily 4.4.5f3

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleHDAController 274,9

  com.apple.iokit.IOHDAFamily 274,9

  com.apple.iokit.IOAudioFamily 204.4

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.kext.AMDSupport 1.4.2

  3.12.8 com.apple.AppleGraphicsDeviceControl

  3.12.8 com.apple.driver.AppleGraphicsControl

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

  com.apple.driver.AppleHIDKeyboard 181

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.iokit.IOFireWireSBP2 4.2.7

  com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  4.6.1 com.apple.iokit.IOFireWireFamily

  com.apple.driver.AppleXsanScheme 3

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 6.0.2

  com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCI 1.0.1

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.iokit.IO80211Family 1110.26

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IOSMBusFamily 1.1

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.driver.AppleEFIRuntime 2.0

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417,4

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  com.apple.kec.Libm 1

  Hello

  com.paceap.kext.pacesupport.master [no charge] (5.9 - 10.6 SDK - 2016-06-25) [Support]

  /System/Library/Extensions/PACESupportFamily.kext/contents/plugins

  com.paceap.kext.pacesupport.Leopard [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

  [no charge] com.paceap.kext.pacesupport.Panther (5.9 - SDK 10.-1-2012-07-11) [Support]

  com.paceap.kext.pacesupport.snowleopard [no charge] (5.9 - 10.6 SDK - 2012-07-11) [Support]

  com.paceap.kext.pacesupport.Tiger [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

  Same here > kernel Panics extensions - part 3 - Uninstall...

• End of 2012 Mac mini won't go beyond screen bar startup after update 10.11.4

  Hey all,.

  I'm puzzled.  I have a Late 2012 Mac mini, upgrade 10.11.4 yesterday, after the computer restarts, it was stuck around 60% on the progress of startup screen.  I let it go for 12 hours, nothing.  The screen fell asleep, and when I woke up it I had a mouse cursor which would pass but nothing to use it with.  When you try to start in safe mode, I get a little further, about 95% and then she stalls.  When booting into single user mode, it stops at "pci break: SDXC.  I fixed the disk with DiskWarrior on the repair disk, no help.  Any help would be greatly appreciated, getting very frustrated and I would like to solve it, instead of doing a restore.

  I forgot to add, that when starting in Diag mode, I wonder for a wifi network reach, I do then it's right there.  Do not enter an IP address.

  Thank you!

  -Anders

  The Diag mode gives me an error-2002D.  Looks like I have some errors going on here :/

• Equium A200 - startup after update problems

  * After installation from what I understand, is the most recent update for windows vista and when the computer has re boots itself, I am greeted with the following message: *.

  ' + Cannot start WIndows. A recent change in hardware or software may be the cause. To solve the problem: +.
  + 1. Insert your windows installation disc, and then restart your computer.
  + 2. Choose your language settings, and then click "next". +
  + 3. Click on "repair your computer." +

  + If you don't have this disk, contact your system administrator or computer manufacturer for assistance. +

  + File: / Boot? BCD +.
  + Status: 0xc000000f +.
  + Info: an error occurred trying to read the boot configuration data. » +

  * Iv tried to start in safe mode by holding F8 when booting, but this causes just the start screen flashes that light while a sharp peak noise, like an alarm.*
  * Am I right in assuming that when he tells you to insert the disc of windows intillation that it is made reference on the recovery disk 'product' I got with the laptop? If so, I'm reluctant to use this drive as it says on the back of the box "WARNING: If you use the product recovery, you will lose all data on the hard drives..." It is the only option or offer just a funtion of repair that will remove all files that I have a number of very important issues that were yet to be supported in amont.*

  * Any help would be appreciated *.

  * Thank you *.

  * Stores *.

  Thanks for this info stores.

• Startup after update BIOS problems

  I recently updated my Alienware Aurora R4 for Windows 10, that satisfies me, but I noticed that my fans have been reallt strong during startup and shutdown, and I had to reset manually in my Alienware Command Center application which caused irritation, so after minimal research, I saw that one of the proposed fixed has been update BIOS I foolishly thought would be a quick easy thing to try, so I updated the BIOS version A7 to A11 day because I was not aware of the flashing, which I realize now, I should certainly have done. In any case, the update seems to work fine, no freezes or crashes and I just restarted my computer and stop was normal. When he started upward again if, instead of start properly, he showed a 10 windows screen that says: "your computer encountered a problem and needs to restart" with an error that says INACCESSIBLE_BOOT_DEVICE. When it has rebooted, I went into my BIOS settings and that he made sure that my the first boot device has been "hard drive" (I have two discs SSD, a HARD drive, but they have never caused me problems before and nothing has been fixed when I took out the HARD drive without windows on it). So far, I restarted a bunch of times and tried everything I can think of. Any help would be appreciated! Thank you

  simple tips I gave to a member of the forum the other day (it is possible that the bios update is back your settings to "default"):

  • Check your bios, game sata AHCI controller
  • set the boot device as HDD #1
  • others had the chance in the bios, go to 'legacy boot.
  • remove all external usb devices for now accept keyboard and mouse back.

  Dell/Alienware advice says to disable secure boot...

• Windows XP hangs on startup after update 2.0.2.

  Hi, I am a new user of Vmware Fusion (or Mac for that matter) so if you think that my problem happened to be quite some pretty stupid mistakes on my part.

  Tuesday, I just noticed that the update to version 2.0.2 and downloaded at short notice. The program wasn't on my Windows XP has been suspended, and I made the mistake of not the have stopped even if it has been suspended. I install the new update without problem, but when I restart my computer and turn it on... Well that's the point that I realized that my windows account is always logged. I noticed that he was waiting to load something, the pointer is an hourglass. But it not let me restart my computer regularly. But once it starts, it freezes on the loading screen windows. Not sure what to do, I'm forced to reboot through the merger of WMware toolbar command. He now says he needs to check a large number of files truncates the files on it, but during the process. It happened pretty fast so I have not heard what it was, but after that, he reached an error and blue screen and tries to restart. At this stage let load normally just gives the same error message, and if I go to safe mode, it just freezes. I noticed that avast trying to do something before the error message. See the attached screenshots for what I mean.

  He also tells me that VMware Tools is not updated, but when I try to update, it doesn't really do anything. I don't think it would work until she starts toward the top right (that I can't do). and unfortunately, I was not smart enough to have a backup of my desktop files (which I need), nor has the Snapshot function before my problem.

  There is a simple problem that solves that I'm not aware of the problem?

  If not, will reinstall the fix (assuming it will work directly in my new v2.0.2)?

  If I reinstall it, is there a way to access the files on Windows XP through my Mac OSX? I can't of course through the Wmware Fusion.

  I'm sorry that if this is not the right place to ask about this, I was directed here through the support for the view part after watching a response.

  There are several thing you can try and basically the same things as if it were a physical machine as the boot with the XP install CD / ISO Image and either use the Recovery Console to repair the registry or do a repair install, but the first thing first of all try to mount the virtual hard drive and retrieve your user data , then, first of all make a backup of the entire Virtual Machine assuming that it is a normal base file Virtual Machine and the Boot Camp partition.

  Take a look at: VMware Fusion (menu bar) > help > VMware Fusion help > managing Virtual Machines > VMDKMounter to help mount a virtual drive as a Mac Volume

  Note: If VMDKMounter is mounted with success you will be unwise and a titled Untitled white drive icon should appear on your desktop.

  Also use VMDKMounter with the Virtual Machine, not suspended and merger shutdown closed...

• Firefox crashes on startup after update

  After the latest Automatic update, Firefox crashes whenever I start it. Uninstalled it, downloaded the fresh installation files, installed these - even of the accidents.

  Hello markusrex, this seems to be quite prolific start at this time crash. other affected users have reported that it is solvable by a clean reinstall:

  1. Please try to uninstall firefox from the system control panel.
  2. then go to the firefox program folder (usually located in C:\Program Files (x 86) \Mozilla Firefox)-remove the entire program folder firefox manually
  3. try reinstalling the browser with a new copy of https://www.mozilla.org/firefox/all/

• Laptop HP 15-af122no: crash at startup after update driver AMD

  I bought my computer on February 2016, so it is quite new. There are 10 Windows ready and recently it has been upgraded. My internet connection LAN, no problems with that.

  Yesterday an automatic detection of AMD system informed me that my drivers need to be modernised and I gave her permission to upgrade, maybe that has been my biggest fault... After that I needed to restart the system, and I did. The computer started showing strange texts on the screen, I remember that one word from him, it was at the end of the first line: "watchdog". After that the text of HP showed and freezes on the screen. I tried to start the second time, the result was the same. Third time the texts initially showed no more, but the start crashed on HP display.

  I am now on a computer it's not me and I tried to get help for this problem to the Support HP Finland, since I can't use HP Support Assistant on my HP. I found a few tips I've tried:

  -J' removed the battery and the power cord, but it did not help

  -After starting the computer, I pressed ESC several times to get in safe mode. Finally I got to a mode where I could enter a few commands (unfortunately I do not remember more..), but it does not give me the result I was expecting (and said what page of support must be the result). The computer said that it does not find these batch files requested.

  I'm really sad that I have had no money to buy a proper memory stick or cd to make the stick recovery or discs... NOW, they may be needed.

  I've been thinking about resetting the computer, but there could be some risk, too... Please, please, help me, I don't know what to do anymore. I hope you find a solution to solve this problem, thank you already!

  Hi there @Troublefinder,

  Thank you for joining the Forums HP's Support and welcome! You have just a great place to ask questions, find solutions and get help from others in the community. I understand that once you had done a update driver and recently upgraded to level to Windows 10, now your HP for laptop - 15-af122no (ENERGY STAR) is not allowing you to start correctly.

  Please note , remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Are you blocking upward at the HP Logo?

  Have you tried a hard reset?

  Have you tried to Test for hardware failures?

  Are - that you receive error messages or error codes?

  You happen to see a blue screen to choose an Option at all?

  If the computer hangs at the HP logo screen, try to clean the vents from the computer to the air and then restarting the laptop.

  Follow these steps to remove and reinsert the memory modules for troubleshooting:

• W3 blocked at startup after update failed

  Hello

  I just bought an Iconia W3 810 today, after setting up and the Microsoft account I had to install 108 updates. Once they are all downloaded en installed had to reload. The new update Setup has failed and now everytime I try to start it displays a message indicating an error in configuration of the windows updates and it attempts to undo the changes. It was stuck on this during the hours, and when I put the boot order to boot the recovery disc from Acer it will boot the drive, but usually returns to the factory because of a bad disc settings. (I tried two DVDs of 1 or 2 in a powered external usb dvd drive) I have no way to start the tablet or change anything now. Is there a way to solve this problem or do I have to return it to the store and get a refund?

  Hello, if it were a disk you will need accessories. Provided that the Windows installation, Windows will not drivers necessary for your tablet. I would try the Acer support chat option or if you have this option to return. If you do some research here in this forum, you will find a lot of people trying to change the way in which the Tablet is from the factory. But not a lot of success.

• Adobe Premiere crashes on startup after update

  I updated Adobe first CC 2015 a few weeks back, and after his release, would crash whenever I try to launch it. These two pop-up windows.

  I tried to uninstall the program to completely reinstall windows with a clean install on my computer and nothing works. Any ideas?

  Thank you

  Please refer to this thread: Re: Premiere Pro 2015 won't open after the recent update

  Thank you

  Regalo

• If you can help w/drive, BSOD &amp; no win startup after update

  I've been running the drive (4.0) Win7-64, with Win7-32, installed in the drive. I started having an error of memory via a specific program, while I have not ever one in the host OS (Win7-64). So I saw there's a 4.02 and installed... same error memory. Then I noticed there were a bunch of Win7 updates, that I did not. Hoping that would solve the problem, I installed the updates. To restart, he had a BSOD based on FTDIBUS. SYS. I would like to share in a version checked this, but Win7-32 does not start in the player window. When I try to install the player tools, I can't - you need to BONE up and running first. Someone know if there is a solution, or do I have to Kiss this goodbye content VM?  (Thanks for any help you can give)

  Rich

  A "note:" thanks for the help. I have finally got rid of VMWare and just install another copy of Windows. It was for a therapeutic critical application and should have its own installation of Windows in the first place.

  Try to insert the disc to install Windows 7 on the virtual machine and do a repair.

• Lightroom crashes on startup after update 2014

  I installed the new updated Lightroom 2014, as well as the PS CC 2014 and bridge. PS and bridge work correctly, but LR crashes at startup. Briefly, I see the splash screen and logo and then it disappeared.

  I tried to wipe and reinstall LR, but the problem persists. What should I do?

  Greetings,

  Mauro

  https://helpx.Adobe.com/Lightroom/KB/unable-launch-Lightroom-55.html

• Satellite C50B freezes at startup after update BIOS to 5.10

  Hello
  I updated the BIOS of my Satellite C50 - B - 14 d (PSCMLE) to 5.10 (a final release early sept. 2015).
  The update succeeded, and the laptop runs as long as I do not install the drivers for the card WiFi (Atheros AR9485).
  If I try to install the driver (it does not matter which, those of the Toshiba website or those of the manufacturer, of), the laptop crashes before the end of the installer.
  Installing drivers from Device Manager makes the laptop freeze on when Windows starts (I tried 7, 8.1, and 10).
  Completely on the Windows logo screen it freezes, and I have to turn off it.

  In addition, the wired network adapter is not detected (it does not appear in Device Manager).
  The same question is described here (http://www.eightforums.com/general-s...ses-start.html), but no solution.

  Any suggestion? The BIOS may be downgraded? The BIOS update utility does not Flash an older version.

  Thank you!

  Hi indutry,

  I also have exactly the same problem since updating my BIOS to 5.10 with my Toshiba C50 - B - 14 d PSC MLE

  I have to start windows in safe mode without network to disable the Atheros AR9485 before restarting again in normal mode.
  I now have to use an external WiFi adapter as my LAN port is now also lack!

  Upset that the BIOS update has broken all my embedded network on the laptop.

  I tried to update the Atheros drivers to the latest version, but as soon as the device is turned on again the system crashes and we're back to square one.

  There is no solution that I can find other than turning off the unit and live without built in WiFi + LAN.

  I hope Toshiba can be remedied with a new BIOS update?

• Black screen on startup after update of nvidia driver geforce 8600M GT XP home with Bootcamp on dual-boot MacBook Pro 3.1

  My computer is a 15 "MacBook Pro Intel Core 2 Duo dual boot Windows XP family. I recently upgraded to Bootcamp 3.1 that caused a major graphics display problem: the screen resolution has been set to 640 x 480 and wouldn't all interface fit properly on the screen, making it difficult to use to completely unusable. Finally, I figured out to roll back the Nvidia GeForce 8600 M GT driver of the 197 present in the previous version of 195.

  It's all working again.  XP, the interface and all my apps worked fine.  However, a couple of my applications asked me to update the driver, and I am just curious stupidly.  So, I turned on the system restore, backed up my XP using Winclone partition and tried to update the driver again. This time, the problem is even worse. Once XP has started, the screen goes black and I don't have access to the operating system at all.

  Is it still possible to roll back the graphics card driver without wipe partition, completely reinstall XP through bootcamp Assistant and then reload my clone? I have the XP installation dvd, but do not know how to proceed with him.

  Thank you

  OK, I solved my problem. I managed to solve this problem by booting in safe mode using my installation cd.  This got me to the home user interface screen where I could access the nvidia folder and reinstall the previous version of the driver.

  Hope this helps someone else out there with a similar problem.

  Good luck.

• Photoshop CC blinking at startup after update.

  Installed the update for CC Photohsop and when I open the program, the screen flashes like a strobe light. Same thing happens in Lightroom and InDesign, since the update. Any thoughts?

  Hi Fabio,.

  Suggest you to disable "Show start workspace" in Photoshop preferences > general tab > restart Photoshop and check.