Equium A300D - white screen

Similar Questions

• Equium A100: white screen

  Help! My laptop has a totally white screen and I can't get a display. I think it has something to do with my kids! I read the user manual, but am completely blocked. Can someone advise? The caps lock is on and I can't get rid of it either.
  Thank you

  Hello

  I guess that your children have changed something. Maybe it s not a malfunction of the equipment.
  What you can do is to connect the external monitor to the laptop.
  Check if you can see something on the external monitor. You can also try to change the display device with the FN + F5 key combination.

• Equium A60: white screen on WMP when watching DVDs

  When you try to watch a dvd, I get white on windows media player screen, when I use InterActual Player I get the error message saying "unable to initialize your dvd for playback decoder" have tried a number of things to resolve but no joy!

  Can someone help me please!

  Hello

  This error can occur if you do not have a DVD decoder installed. The InterActual program includes no DVD decoder files, so you must have a DVD of work already installed program so that he can use. If you are normally able to watch DVDs on your computer, then you have a DVD decoder.
  But it seems that Windows Media Player does not include a DVD decoder.

  Why don t you use the WinDVD to watch DVDs? This software is usually able to play the DVD

• Equium A200 - white screen at startup

  Hi all

  I need help. I just turned on my laptop (it has not been used for a few weeks) and it doesn't move on the loading screen, the loading bar scrolled so it collapsed. Its just very annoying. I rebooted several times, tried to take the battery, but still no difference. It has been "loading" now for about 10 minutes, then stopped loading and that a screen is empty. The keys are also beep if I click on them. The laptop is only 4 months and rarely used... could someone please advice?

  Details of the laptop:
  Toshiba SATELLITE A200-1VO

  Thank you! :-)

  Have you tried to reinstall the system?

  I mean you can try to boot from the restore CD that came with the laptop.
  In this case, you could test whether the material is ok

  If you will not be able to boot from the recovery CD and the laptop does not start the system, then you should ask the authorized service provider in your country for assistance of security seems to be valid and that's why everything has to be done for free

  Good luck

• Equium P200: White screen if I try to see movies flash in mode full screen

  Hello

  Displaying flash animations (you tube videos, bbc etc website), if I try to view full screen I get a blank screen.

  WMP and dvd playback is fine. Only flash I think

  Known problems?

  Had the laptop about three days, flash player etc. was pre loaded.

  Can you help me?

  See you soon

  Probably this thread might help you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=106681𚂹

  Found this statement:

  -Right-click on the video your streaming using flash player.
  -then click on settings
  -under the heading of the display must be set to the first tab,
  -Uncheck the use hardware acceleration

  Enjoy ;)

  Would appreciate your comments

• Equium A300D - after updating the BIOS screen is empty

  Hi, I did a bios update on my Equium A300D-PSAK2E and its bricks of my laptop! When it restarts after update screen is empty!

  Is there a a sort of way to launch a recovery of bios by pressing certain keys on the power on the image of the bios on a USB?

  Kind regards

  Dan

  Hi Dan,.

  Unfortunately I think that there is nothing you can do if the BIOS update gone wrong... In this case the ROM module must be reflashed to an authorized service because guys have special tools to do this process delicate reflash.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

• Equium A300D - 16 c turns on but the screen does not show anything / remains black

  Hi, I have a laptop Toshiba Equium A300D - 16 c.

  It was fine until now...

  When I press the power button, my laptop turns on but the screen remains black / off.
  The indicator disk HARD is not Flash or anything... (in case that helps)
  I also tried to remove the battery, hold the power button for 30 seconds and then reconnect the power cord... Same laptop turns on but the screen is black.

  I tried to connect my laptop to my PC using a HDMI cable screen, but without success... Laptop turned on but monitor my pc showed nothing.

  I have not changed anything inside my computer laptop or unscrewed it.

  PS:
  Quite often, I kept my laptop on the bed/pillow it may have something to do with overheating or something.

  How did I get to this point:

  Yesterday, my laptop was fine, there was nothing wrong with her... I turned off during the night, but when I tried to turn it on this morning it is where I have faced this problem.

  Any help would be appreciated.

  Thank you very much
  Rejanu.

  Long ago, I had similar problem on my old Satellite. CPU was faulty. After replacing the CPU, everything was OK again.
  I put t really know what to say.
  Maybe you should contact Toshiba and let check your laptop. They have diagnostic tools and may know what is the problem.

  What do you think?

• Equium A300D-13 x stucks on the installation screen

  Recently, I sent my laptop (Equium A300D-13 x) back to the Toshiba to fix because it was overheating and cutting.

  She came back today and when I turned it on I got the screen where I was asked if I wanted to go in safe mode or start Windows normally.
  Then it goes to a screen where it says, * complete the installation may take several minutes.

  Please do not interrupt or shut down the computer! *

  I waited all day today and I'm still stuck on this screen.

  Someone had the same problem? And if so, how can I solve this?

  Hello

  I've recovered my laptop several times and the installation always goes smoothly.
  But of course this installation problem could happen still and I think that you should just repeat this procedure.

  If you have n t Toshiba Recovery disk then try to recover the laptop using the recovery of HARD drive option.
  Just press F8 while turning on laptop.
  Then choose fix my computer. Then a new window will appear and you can select the new option called Toshiba HDD.

  Check it out!

• White screen on Equium P200

  Hi all!
  yesterday morning I started my computer, after 5 min, I close the lid, and I'm going to work.
  When I'm back back I opened the lid and I get a white screen.
  Well, I think is right for the moment. I restarted but white screen again.
  I restarted many times but nothing. I heard the noise of vista hard drive to work, but I don't get nothing on the screen. I'm trying to connect an external monitor but nothing.
  Anyone have this problem? I Don t has an idea of what I can do to recover the normal screen of you.
  If I use reinstall drive I lose all my data and I don't want to. Can someone help me with a few great ideea what can I do?
  Thank you much in advance.

  A white screen usually means that the backlight is on but no signal reaches the graphics card on the screen. This could have many reasons such as:

  -a broken screen cable
  -graphics card failure
  -view controller malfunction
  -some short circuit between the graphics card and the screen

  In your situtaion I use warranty (if still present), sending the machine to the [the closest available service provider | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] and have them check the hardware on some failures...

  That's all I can tell you from my experience with white screens...

  Welcome them

• White screen on model Equium M50-216 SM57E problem

  I'm having a strange problem with the computer screen... Start-up of the laptop... against the cold, the Toshiba logo flickers then the windows logo then flashes black... However, the screen is still backlit... The laptop works perfectly apart from that. I can connect to external monitors and it works very well, but here's the weird thing...

  I connected on three different monitors it works in 2 4:3 monitors. It does not work in my wide screen... when he starts the Toshiba logo comes up then the windows logo then just prior to the Welcome screen of windows (that blue thing at the beginning) the monitor says no signal.

  After a while the display on the laptop will appear and be fine until I stopped it (usually, sometimes the screen off, and without touching it's back in a minute).

  The white screen comes generally from when the laptop is started after being off for a while; For example, suppose that during the night... I simply closed the lid last night, and no do not stop correctly then when I opened it this morning the screen worked perfectly. There is no other display weirdness... bad pixels, lines, anomalies of any other nature.

  I recently reinstalled everything and the problem is still there. Please say it is (Hey! the screen comes back) a driver problem or something as simple

  Help with this (or even a suggestion) would be greatly appreciated
  See you soon
  Dave

  PS: everything works fine apart from this.

  Hi mate

  The story sounds very mysterious and my first thought is that it might be an unwanted material.

  But usually it of not easy to provide a diagnosis exactly and we should first check if the software doesn't cause questions!

  So first of all, it would be interesting to know if the same thing happens on laptop retrieved fresh. Using the recovery CD, you would get the factory settings!

  A BIOS and update the graphics driver are the following options!

  So check it out and let me know the results

  See you soon

• New battery is not detected on Equium A300D - 16 c

  Hello

  This is my first post on the site. I have a problem with a new battery on my Equium A300D - 16 c. (no battery detected)
  The original I got the computer died after two years of use, so I had to order a new one to replace. I received and he himself works very well, giving me a charge of 90 minutes. But the problem is that it isn't detected by the computer when I click on the power icon on the bottom bar of the screen, so I know how much time I have left with him. In addition, the orange light which indicates that the charge should go white whether full cost, mine just started orange flashing after awhile (what is when it is fully charged?).
  I got power to my computer a few minutes ago and he cut and I had to turn it back on, despite the battery in and it is complete free (as it has been in all day and the sector is since in periods of decent length).

  What can I do to fix this?
  Note that I'm not too good with computers, so anything can be better explain really, really just that I'm not the most skilled when it comes in this region.

  Thank you

  Purchased product Toshiba original after the part number, placed on the battery?

• Exchange of view on Equium A300D

  I have 2 x Toshiba laptops. Satellite A200 Equium A300D.

  My question is: the display of work in the A200 A300D?

  I know they use different inverters and different connectors on the motherboard to inverter cable but the screen of the A200 works fine it does not work in the A300D. What I see is a picture very dark

  BTW the A300 fine output to an external monitor

  Any help gratefully received

  Maybe you need to just Exchange defective FL inverter on your A300D and must not exchange any display.

• My Equium A300D freezes at BIOS

  Someone help with this one?

  My Equium A300d froze in the Bios boot screen. Finally, I have replaced the ram and hard drive but still the same problem. By trial and error I discovered that the problem was the dvd drive... Remove the system and it loads well, put in place in and from the gel to the bios!

  I replaced the dvd drive wiith a new compatible drive but same result so assume the real hardware is not the problem then can only assume a motherboard problem?

  Has anyone encountered this scenario? Thanks for the research.

  It's really strange question. What version of BIOS is on your computer?

  If I understand you well without ODD your laptop starts properly and preinstalled operating system can be loaded.

  Have you tried to implement ODD when Windows is fully charged?

• Equium A300D - 16 c - display does not

  My girlfriend has an Equium A300D - 16 c which had some problems lately.

  In recent months, whenever she turns on the system, the display does not pull upwards and it takes several tent for lights.

  The strange thing is every time that happens, the system boots normally always that you can hear the Windows 7 startup sound.

  I'm looking for in this question for some time now and I'm running out of ideas.
  Initially, I thought that it could be a wiring problem but by stripping the laptop down, I found that the cable was still firmly in place.

  I also tried to remove the RAM, HARD drive and DVD drive, but it still doesn't pull upward. On the odd occasion she started upward when you do it, but after restart, it has not started again.

  I think that this could be either a transmitting power or the mother board is on its way. This problem has worsened gradually (it took more than 20 attempts it turn on and off this morning) so finally he come not at all.

  To clarify, the system will start after several attempts, but most of the time that the screen not turn on (not even the backlight). It works with an external display on the HDMI so the GPU works.
  I tried to keep the power with no energy source button to unload the system, but it does not help.

  I also noticed that if you hear it boot and close the cover, the reopening of the display lid will come on but with the bad (1024 x 768) resolution that has intrigued me even more.

  Any ideas on what could be the problem? I would repair it rather than just buying a new as its still a decent system apart from this problem.

  > To clarify, the system will start after several attempts, but most of the time that the screen not turn on (not even the backlight). It works with an external display on the HDMI so the GPU works.

  This means that you can use the laptop as part of the external screen, but it does not work with the internal screen?

  This means that the internal display module isn't OK. It probably needs to be replaced.
  But this does not explain the problems while turning on the laptop.

  In the worst case the mother for laptop AND the internal screen are affected, but it would be really strange and rare bad luck

• Re: Equium A300D - 13 X - boot problem

  Hello

  I can't initialize problem. Powers of phone on ok, with a few flashes of HARD drive as it tries to start. But no sounds other than the kick, fans have tried all the usual things like FN/F8 to enter safe mode, also cold start battery and network opens. Power button down for an all black screen minute etc etc, but still no screen or emits a signal. I suspect a power supply problem and have tried with different loader but no effect. Laptop is a 4 year old Toshiba Equium A300D - 13 X everything worked fine but I recently renewed keyboard, screen bezel, Mo media Ribbon, power/Ribbon button, Mo.

  I thought I might have left some cable detached so all reopened and checked, but everything is correctly fixed I think.

  Any help would be greatly appreciated.

  Thanks Bob.

  Hello Bob

  It is not easy to be objective with this problem. On one side you have disassembled your laptop on your own and we don t know if everything was done correctly. I m also not technician and each laptop disassembly has been a success.

  I put t really know what to say. Try to talk with someone who can help you with this and check if everything is OK. Small error as causing electrical circuit can damage the electrical components of the motherboard. Try to check the display cable connection.

  Have you tried to connect the laptop to the TV and check if all come to this?