Equium A60-181: how to manage the connection to the TV or monitor

Similar Questions

• Equium A60-181 (PSA67E) - cannot find the display driver

  Due to problems with some games I did experiments with other ATI drivers for my laptop.
  It turns out that their support for Open GL is scandalously broken so I tried rolling back the drivers.
  Unfortunately Windows doesn't let me do it because I need the original driver files so tried to download on the Toshiba support page.
  Well although it seems that the Equium A60 - 181 aka PSA67E does not appear as a product more also any attempt to seek A60-181 or PSA67E displays empty hits Unlike Google or Msn.

  What happens here? Please tell me Toshiba did not hold for this laptop isn't exactly new or old it is still worthy of driver / BIOS update support especially when needed.

  Richard S.

  Akuma is right. All the notebooks are listed in the archives.
  Check it out.

• Equium A60-152: how to change the IRQ?

  Hello!

  I have an interface audio firewire (Edirol FA-101), who is having a few problems and I think it's to with an IRQ conflict on my laptop Equium A60-152.
  When I looked in the Device Manager, I noticed that my firewire host shares IRQ 19 with several other devices (USB, Cardbus etc.).
  Is it possible that I can move my firewire host so that it runs on a separate IRQ of these other devices?

  I noticed that several numbers are not in use (18, 20, 9-11, 4-7), maybe one of them would be appropriate? Whenever I try to change the IRQ of a device in Device Manager, it is marked as "automatic settings" and I can't change that.

  Thanks for any help you can give me!

  Phil

  Hello

  Usually it s not is not necessary and not advisable to change the IRQS manually.
  The operating system controls all the settings and I guess that all the parameters of this are ok.
  Write you about some problems, but you don t say what s wrong.

  However, it is a 3rd party material and in my opinion, you will have more chance to solve the problem if you contact the manufacture of equipment support.

  Good luck.

  PS: Please also check this site with FAQ about this material:
  http://www.Roland.com/products/en/_SUPPORT/FAQ.cfm?LN=EN&PRD=FA-101&DSP=0&iCncd=491

• Equium A60 - 181: strange deformations on the cover

  Hello.

  I have an old p4 A60-181 for 8 months with screen 15 3.06 inches.
  On the external plastic lid, I noticed a strange thing, starting to happen.
  Looking forward and down on the cover above the left side about 2 inches to the bottom and 2 inch from the edge begins a discoloration of the blue cover and on a thorough inspection, it feels like it has distorted in an area about 2 inches in diameter.

  I suspect that something hot in the electronics of display is originally a problem to the external case.
  Not happy about this.
  Someone else noted this?

  Thank you
  Paul

  Hello Paul

  If you think that there is something serious, in my opinion, you should contact the authorized Service partner and let check the device. One of my friends has the same unit and I was interested if it has the same problem, but everything is as usual.

  Good bye

• Equium A60-181: how to connect to the router belkin wireless encrypted?

  The title says everything, how can I connect this laptop to my network with 128-bit encrypted signal. The router that I m trying to connect to is a belkin and connected without any problem before encryption. So please help me because I want to use my laptop again with the guarantee of the encrypted signal thank you.

  Hello Dean

  If your laptop can see your WLAN, it must be a problem with the network settings. In my view, you must configure the router to the factory settings and try to establish the connection without any network key.

  If it works well, you can then configure the network to be sure.

• Equium A60-155: how to clean the fan?

  This isn't a problem as such, more than one request. How do you clean the fan? A litle while ago my laptop kept turning off itself, and it turned out to be part of the problem I the fan was clogged so I was wondering if anyone knew how to clean so I can myself sorting in case it happens again. Thanx

  Hi Jemma,

  The problem is that dust is sucked into the fans and is then trapped in the radiator CPU effectively blocks.

  A good way os compensation this accumulation of dust is to use a hose of vacuum cleaner against the aspiration air grills so that dust is sucked in. Just put the hose against the grids of aspiration air for a few seconds and block any gaps around the pipe with a cloth.

  Kind regards

• Equium A60-181: Win XP does not start successfully - the BSOD reboot

  Hello.

  I have an Equium A60-181 which has an operating system problem.
  Loads of XP logo at the beginning, when it happens to show the log on screen, it is a quick blue screen of death error, and it restarts.

  I tried to go into safe mode, but it blocks on atisgkaf.sys.

  Is that what I can do to save the operating system?

  How can I start to diagnose if it's a hardware problem?

  Thank you, Lawrence

  Hello

  The atisgkaf.sys file belongs to the graphics card driver.
  But as Akuma has proposed, the Windows operating system does not load 3rd party in safe mode drivers.
  This is why the ATI graphics card driver should not affect the start-up procedure.

  However, this is only my personal hypothesis and believe me; nothing is impossible, so a hardware problem might be possible.

  But just a question;
  Have you tried to reinstall the OS?
  The installation process goes smoothly through the unique installation steps?

  I think that the new installation of the operating system is a good idea to find out if it is a hardware or software problem.
  Maybe you should try it

• How to manage the tv after hdmi to hdmi connection

  I want to connect to my computer windows 7 with tv on my Vizio tv hd tuner. I intend to use the hdmi to hdmi connections. After that I made the connection how to manage the tv without going back to the computer. My TV is in another adjacent room to my computer, sbout 20 ft away. Can I use a wireless mouse to manage the tv? The monitor and tv both appear at the same time? What are other options? Thank you for taking my question and to meet others, I put in the forum. Donnie

  I guess that the xbox 360 is a must for my setup. Thanks for your reply, Donnie

• Equium A60 - 181 und external monitor

  Hi I have an Equium A60-181 with connected Ati graphics card in and monitor external 19 "CRT. While the monitor seems to work I ran into a few problems. By turning on the monitor XP prompted me to install drivers I assume that they are for the monitor in question sheet etc.

  It seems in any case that I'm unable to change the resolution or refresh rate of the screen is set to 1024 x 768 @ 60 Hz. I changed the display properties and selected reverse, but when I OK/apply the cursor goes back to 1024 x 768 and the refresh rate is 60 Hz - huh?
  I restarted XP and still have this problem I even Device Manager check for yellow markers so now I'm at loss here is a common problem with Ati?

  Any recommendations would be appreciated.

  see you soon,

  Richard S.

  Hi Richard

  I'm not 100% sure but I think that the resolution of 1024 x 768 max for external (second) monitor is restriction of graphics card. Is this the situation even if you use an external monitor just without screen laptop (FN + F5)?

• Equium A60 - 181 Win XP: card incorrect RLAN - icon notification taskbar

  Hello world

  Ive took my Equium A60-181 for quite a while now and its been fairly reliable, sound always connected via WiFi to my home network.

  Very recently, however, the icon in the tray system for network connectivity was incorrect. He said always I am not connected to the network... but I am, because the internet works and I can still access the network drive that is located on another computer on the network and network printers.

  Why is the system status bar tells me that I am not connected to the network when I am?

  Any help will be greatly appreciated.
  And Happy New Year.

  Rhys James

  Hello

  I presume that you have assigned the LAN TCP/IP address and gateway manually parameters and these parameters are not set to automatic. Am I wrong?

  The same message appeared to me. I connected my laptop to the other PC and changed the TCP/IP address settings.
  It was the reason of this message in the taskbar.

  All simply set it to auto again and you will get rid of this annoying message.

  Best regards

• Need battery for Equium A60-181

  I'm after a new battery for my notebook equium a60-181.
  The mounted battery is a PA3384U-1BRS.
  I looked on the toshiba web site and cannot find this model.
  As he was replaced by another model, if yes what a number of battery should I look for.

  Hello, my friend. I see you are new in the forum. Welcome ;)

  Now to your question:
  You can order all the compatible parts and ASP support in your country. I think that guys order it directly from the Toshiba.
  Anyway, the European Toshiba site contains a beautiful site on the options and accessories.
  You will find lots of devices and parts which are included in the different categories and are compatible with Toshiba laptops.

  Check it out

• I would like to know how to manage the ASN.1 encoding/decoding in LabView?

  I would like to know how to manage the ASN.1 encoding/decoding in LabView?

  Hello J,

  in the example given here , it looks like a format simple bytestream...

  You must read the byte stream, get the first and the second byte to decode the data type and length and then read & catalogued according to number of bytes. And then read 2 bytes and so on...

  Encoding will work the same but in reverse

• How to manage the SOAP response

  Hello (beginner vCO),

  I use the SOAP Plugin and trying to figure out how to manage the here, a host of SOAP response is the log I get the SOAP response

  [12:53:43.124 2014-05-09] [I] the settings...

  [12:53:43.135 2014-05-09] [I] the available settings:

  [12:53:43.136 2014-05-09] [I] + parameter name: "GetRequestStatusResult", value: "< response >

  < item >

  < ServiceRequestID > SR138917 < / ServiceRequestID >

  OS DEPLOYMENT < ServiceRequestStatus > < / ServiceRequestStatus >

  < ServiceRequestCreated > 09/05/2014-15:20:25 < / ServiceRequestCreated >

  < ServiceRequestCompleted > < / ServiceRequestCompleted >

  MA138921 < CurrentActivity > < / CurrentActivity >

  OS DEPLOYMENT < CurrentActivityTitle > < / CurrentActivityTitle >

  < ActivityStartUTC > 09/05/2014-15:32 < / ActivityStartUTC >

  < ActivityEndUTC > < / ActivityEndUTC >

  < DurationTotalSeconds > < / DurationTotalSeconds >

  < AverageDurationSeconds > < / AverageDurationSeconds >

  < SecondsOffAverage > < / SecondsOffAverage >

  < EstimatedCompletionUTC > < / EstimatedCompletionUTC >

  < / OutputParameters >

  < warning > < / warnings >

  < exceptions > < / Exceptions >

  < / response > '

  It will be better to try and parse text or try and use another method with vCO

  If you haven't done so already, take a look at the action of com.vmware.libarary.soap.processOutParameters.  It is the action that generated the log you have placed in us.  It generates an object Properties (key, value pairs) with the value for each setting that results.

  In your case, assuming that 'outProps' is the result of the above, you can use:

  var getRequestStatusResult = outProps.get ("GetRequestStatusResult");

  And to analyze the code XML with E4X as Ilian said.

• How to manage the photos Lightroom when using 2 computers, keeping any changes made on one or the other?

  Based on http://forums.Adobe.com/thread/1308132?TSTART=0 I decided to add each question separately:

  Hello, I am very interested in buying Lightroom 5.2. I tried the RC that was missing today. Yet, I have several questions that I can't find really good conclusive answers, I'd like to get an answer before buying LR. Please do not write maybe like this or that (assumptions), because I don't want to start my entire workflow and then realize that I have to change all around, please reply, if you know for sure that something works and you are, preferably, using this method too.

  Is the big question, where I want to especially a conclusive answer:  How to manage the photos Lightroom when using 2 computers, keeping all the changes made on one of them, using the same photos for editing. I'm not going to use DNG. Details: I mainly use my old MacBook Pro, but I wish I could use my PC as it is much better (card: i5 2500K, 16 GB of RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HD that I could use, one for backup and one for the actual Photos/changes. I you will probably need to use as my internal HDs are fairly complete and I cannot be the kind of things simply delete or move to one (developer, without loss of music, programs etc.).

  On this basis, how do I save all such Photos folder (pictures and retouching and preferably presets too)?

  According to me, that it should be possible to work cross-platform without having to create a link to the files each time, or without having to keep export/import of the catalog, keeping the single catalog and the picture library on an external drive that is then switched between systems as needed.

  Obvious first requirement is an external drive that is formatted in a way (for example, FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalogue AND folder parent si le catalogue ET le dossier parent images are both set to the same level in a global parent folder, then it should be possible to take advatage of ability of Lightroom to use relative paths instead of absolute paths to detect the images, no matter if the player is named (Mac) or lettering (PC). This is how "export as catalog of ' works, that is, it creates a 'package', alias a parent folder, containing the catalog and a replica of the folder hierarchy to exported along with the catalog images. Take this 'package' to another system (same OS or not) and "it works" even if the drive letter is different or the operating system is different... because the relative path of the image catalogue is always the same.

  I have not tested this cross-platform (if I have between various PC systems with letters of different readers) so for me it's still just a theory, but there may be others who have done this successfully.

• How to calibrate the heart rate monitor?

  How to calibrate the heart rate monitor that shows a too high concentration?

  Hello

  It is not possible to calibrate the heart rate sensor. However, various factors can affect the performance of the detector.

  During training, to optimize the performance of the heart rate sensor, ensure that you wear your watch fits on top of your wrist.

  Apple suggests that consider you the clamping Strip before starting a workout and it loosen again thereafter.

  The sensor is likely to give better results for the workouts that involve rhythmic (for example running) rather than the irregular movements (e.g., tennis). Other problems that can affect the performance of the sensor include the perfusion of the skin and wrist tattoos.

  More information:

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support