Equium A60-181: how to connect to the router belkin wireless encrypted?

Similar Questions

• Dell Inspiron 6000 - connects to the router Linksys wirelessly (?)

  Dell Inspiron 6000 - connects to the router Linksys wirelessly (?). Always done, now just stopped.

  Ideas: Laptop does not connect with the wi - fi router. Never of hade a problem before.

  Hello

  ·          What is the exact error message or code that you get when you try to connect to the wireless router?

  ·          You are able to connect to the internet via wired connection?

  Am adding this link, for your reference.

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Please provide us with more information so that we can help you in a much better way.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Equium A60-181: how to manage the connection to the TV or monitor

  Hello

  I have an EA60-181

  Basically I'm trying to look at something I have on my laptop on my TV, I have connected to correct blue port on the back on my laptop and plug the other half into the phone from my pc to my TV, the pc cable. Then I turned my tv on pc workstation, you press fn + f5 for lcd/tv and nothing. I just get a no signal going to my tv as it is said that he is looking.

  I don't really know what happens someone please tell me what is happening.

  What is the resolution?

  p.s. When you look at the section displayed on toshiba hwsetup that is set to lcd + analog RGB and on the Advanced tab on the control panel display screens Setup ati watch tv is not connected, even if the cable is connected someone help me?

  Thank you

  Wayne

  Hello Wayne

  Sorry, but I didn t understand how you connected to your laptop to the TV and you hear with good blue port.

  If you want to connect properly and the easiest way, you must use S-Video output port on the back of your laptop and connect it with an S-video cable to your TV (if TV has an S-video port). The S-video port on your TV should be enabled and using FN + F5 key combination that you should be able to get on television.

  If the image is black and white, this means that S-video port on your TV is not properly enabled.

  Good bye

• Satellite L450-181 - how to connect to the TV?

  How to connect my laptop to my Toshiba regza TV?

  Hi ian guest,.

  Unfortunately, your laptop doesn t have output HDMI then you must use the VGA port on your computer. Most TVs also have that VGA port, so you can use a VGA cable to the connector on your laptop to the TV.

  If you did start two devices and select VGA (PC) channel on your TV. Press the FN + F5 key combination to switch between monitors (internal and external).

• Implementation of HP Officejet 6500 has; don't know how to connect to the web w / wireless home network

  I have a small home network wireless.  I configured the printer today but it says I have to connect to the internet (part fax machine works).  The bureau only I have, I keep out of most of the time and just use my laptop (which is for work so I can't set the printer up to now).

  Is it possible to connect the printer directly to my router?  They are only a few feet from one of the other; However, I have no idea how do and the instructions don't me much.  Do I need a phone line?  What can I use to connect the two?

  Use an Ethernet cable, available in any tech store, online or even target will have them.

  Plug it into the back of the printer and the router.  You should be able to add the printer to your laptop.  Let me know which operating system you have and I can help you.

• Equium A60 - 181: Installation of applications for the Toshiba

  I'm no stranger to Toshiba laptops and the various pilot facilities, but affecting this laptop for a colleague has cost me a significant amount of lost hair.

  I am unable to get some applications Toshiba works on XP SP2 Professional, namely the Toshiba Power Saver (fails with error 0x7E) & utilities Toshiba (refuses to proceed with the installation in the form of common modules not found).

  The failure of these two applications seems to be down to the "common modules" are not responsible. The common modules files are something I know, but there is not available for download from the Toshiba web site for this model.

  After talking to Toshiba Helpline, I was informed that the satellite is very similar to the Satellite and the common modules for satellite A10 files should work.

  Guess what. they do not.

  All the drivers have been installed in the correct order of the Web from Toshiba site.

  Can someone help Please

  Hello

  Everything that you have done is just and it is not easy to say why this happen. Is your version of WXP Pro SP2 integrated or not?

  This unit comes with SP1, and it is possible that you must preinstall the unit completely before installing SP2.

• Remote Access connects with shared connection, but when I connect the Ethernet to the box Belkin Wireless cable, there is no network connection

  I have dial-up internet. I have to computers. A PC running XP and a laptop that is running Windows 7.
  I have the connection shared, if I plug the Ethernet cable to the laptop, it will connect to the internet. I just bought a Belkin G wireless router.
  I want to know how to configure it, then the router Belkin Wireless put the switched signal shared wireless. I know it's possible, I'm not sure what I'm doing wrong. It is constantly with him saying on the phone "the DNS server does not respond.

  Connect the Ethernet cable from your PC to the WAN (Internet) port on the wireless router.  Do not connect to one of the router's LAN ports. Boulder computer Maven
  Most Microsoft Valuable Professional

• New S10 could not connect to the Netgear WGR641v8 wireless router

  All,

  Really frustrated with the nine s10 that I received this afternoon. All my other laptops are able to connect to the router Netgear wireless fine but this one. I could connect the s10 of unsecured networks of neighbors very well, so it doesn't seem to be a hardware problem. More compatibility issue with built in network card wireless Broadcom and Netgear chipset. I was able to connect to the local network with thin cable.

  Anyone have any better ideas? I updated latest firmware for the router. I think also got the latest version of the driver for the adapter. Where is the problem? I tried setting secured or unsecured (no password) for the router, no luck. I'm scratching my head right now.

  This is the first time ever, I have a new laptop failed on me. I contacted the customer service and the guy had no idea.

  Anyway, thanks in advance.

  The WGR641v8 has enabled ' Access List' (it limits the devices that can connect to only those network manually allow)?

  I have a Netgear DG834G or something like and a S12 (I think it was the same as the S10 (but not sure) WiFi adapter), once I'd added it is MAC to my list of access routers, I was able to connect without any problem (actually I use said WiFi connection right now).

  [edit] Also, check what encryption protocol you should use and what windows uses - he can't pick up the correct one to use and if the connection is a fail for this reason. [/ edit]

• Equium A60-181: Win XP does not start successfully - the BSOD reboot

  Hello.

  I have an Equium A60-181 which has an operating system problem.
  Loads of XP logo at the beginning, when it happens to show the log on screen, it is a quick blue screen of death error, and it restarts.

  I tried to go into safe mode, but it blocks on atisgkaf.sys.

  Is that what I can do to save the operating system?

  How can I start to diagnose if it's a hardware problem?

  Thank you, Lawrence

  Hello

  The atisgkaf.sys file belongs to the graphics card driver.
  But as Akuma has proposed, the Windows operating system does not load 3rd party in safe mode drivers.
  This is why the ATI graphics card driver should not affect the start-up procedure.

  However, this is only my personal hypothesis and believe me; nothing is impossible, so a hardware problem might be possible.

  But just a question;
  Have you tried to reinstall the OS?
  The installation process goes smoothly through the unique installation steps?

  I think that the new installation of the operating system is a good idea to find out if it is a hardware or software problem.
  Maybe you should try it

• Equium A60-181 (PSA67E) - cannot find the display driver

  Due to problems with some games I did experiments with other ATI drivers for my laptop.
  It turns out that their support for Open GL is scandalously broken so I tried rolling back the drivers.
  Unfortunately Windows doesn't let me do it because I need the original driver files so tried to download on the Toshiba support page.
  Well although it seems that the Equium A60 - 181 aka PSA67E does not appear as a product more also any attempt to seek A60-181 or PSA67E displays empty hits Unlike Google or Msn.

  What happens here? Please tell me Toshiba did not hold for this laptop isn't exactly new or old it is still worthy of driver / BIOS update support especially when needed.

  Richard S.

  Akuma is right. All the notebooks are listed in the archives.
  Check it out.

• Equium A60 - 181 Win XP: card incorrect RLAN - icon notification taskbar

  Hello world

  Ive took my Equium A60-181 for quite a while now and its been fairly reliable, sound always connected via WiFi to my home network.

  Very recently, however, the icon in the tray system for network connectivity was incorrect. He said always I am not connected to the network... but I am, because the internet works and I can still access the network drive that is located on another computer on the network and network printers.

  Why is the system status bar tells me that I am not connected to the network when I am?

  Any help will be greatly appreciated.
  And Happy New Year.

  Rhys James

  Hello

  I presume that you have assigned the LAN TCP/IP address and gateway manually parameters and these parameters are not set to automatic. Am I wrong?

  The same message appeared to me. I connected my laptop to the other PC and changed the TCP/IP address settings.
  It was the reason of this message in the taskbar.

  All simply set it to auto again and you will get rid of this annoying message.

  Best regards

• Equium A60 - 181 und external monitor

  Hi I have an Equium A60-181 with connected Ati graphics card in and monitor external 19 "CRT. While the monitor seems to work I ran into a few problems. By turning on the monitor XP prompted me to install drivers I assume that they are for the monitor in question sheet etc.

  It seems in any case that I'm unable to change the resolution or refresh rate of the screen is set to 1024 x 768 @ 60 Hz. I changed the display properties and selected reverse, but when I OK/apply the cursor goes back to 1024 x 768 and the refresh rate is 60 Hz - huh?
  I restarted XP and still have this problem I even Device Manager check for yellow markers so now I'm at loss here is a common problem with Ati?

  Any recommendations would be appreciated.

  see you soon,

  Richard S.

  Hi Richard

  I'm not 100% sure but I think that the resolution of 1024 x 768 max for external (second) monitor is restriction of graphics card. Is this the situation even if you use an external monitor just without screen laptop (FN + F5)?

• Need battery for Equium A60-181

  I'm after a new battery for my notebook equium a60-181.
  The mounted battery is a PA3384U-1BRS.
  I looked on the toshiba web site and cannot find this model.
  As he was replaced by another model, if yes what a number of battery should I look for.

  Hello, my friend. I see you are new in the forum. Welcome ;)

  Now to your question:
  You can order all the compatible parts and ASP support in your country. I think that guys order it directly from the Toshiba.
  Anyway, the European Toshiba site contains a beautiful site on the options and accessories.
  You will find lots of devices and parts which are included in the different categories and are compatible with Toshiba laptops.

  Check it out

• Equium L10-200 - unable to connect to the WLan router

  I have a 200 L10
  When I tried to connect WiFi my suburb does not connect with the router at all. Looks like it was trying to access the Internet.
  Then window took to replace my IP address. But as I can not connect on it cannot be a substitute.

  How can I get them back.
  Cable and work for laptop computer to my wife on the same router work ok.

  I am running XP and connect to the sky

  Hey mate,

  Why you can t replace your IP address?
  First to connect properly, check if you need a static IP address or if you get an IP address from your router (DHCP).

  If you use encryption, make sure you typed the correct password. Disable filtering of MAC addresses in the router to connect properly.

  Last but not least, make sure that you have installed the new firmware on your router.

• How to connect to the server from VPN Windows Sever?

  Hey guys, I recently created my own VPN server to connect to my home network using Windows Server 2003. I know I probably still need to do this if I don't know what I have to do, but how to connect to the server, or at least set it up in order to be logged in? I think I got the computers communicating with each other, but I think that I am running into errors of authentication. Could someone point me in the right direction with regard to what I have to do what I already have Setup? Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.