Equium A60 - 191 boot disk

Similar Questions

• Equium A60-191 - need a new recovery disk

  Hello. Anyone know where I can get a cd recovery Toshiba Equium A60-191-the one I was badly scratched and I need a new - can I download one on line?

  Any help would be greatly appreciated. Thank you
  Dee :-)

  The recovery disc can t be downloaded.

  If you need a new recovery disk, you need to ask your local ASP. They can order.
  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > find an authorized service provider

• Equium A60-191: 'request could not be performed because of an i/o device error. "

  I have an Equium A60-191 my dvd drive has stopped working, the led on this subject is on all the time like his who seek constantly.
  It does not read the CD or dvd and gives an error "REQUEST COULD NOT BE PERFORMED DUE TO A DEVICE IO ERROR.

  I tried to remove and reinstall the drive from the Device Manager, it doesn't help. I also tried to boot from the drive computer, but does not start, so I think that the drive does not work.

  I also noticed that the motor does not work in the reader, because that drives don't spin. Device Manager indicates that the drive works properly. Anyone know what is this error?

  1. click on start
  2. right click on my computer
  3. Select manage from the menu that appears
  4. in the computer management window, select Device Manager
  5. in the right pane, click to expand IDE ATA/ATAPI controllers
  6 identify your CD/DVD drive in the menu expanded and right click on the appropriate drive
  7. Select Properties
  8. in the Properties window, click the Advanced Settings tab
  9. in the Transfer Mode box that represents your CD/DVD drive (typically device 1), open the menu drop down and select PIO only
  10. click OK and exit all windows.

  If this does not solve your problem, then you need to go back using the procedure above and change device 1 to #9 step will support to 'DMA if available '. Then, change the device 0 to "PIO" only in the Transfer Mode box.

  Device 0: Primary IDE Channel
  Unit 1: Secondary IDE Channel

  Of course, he could also be dead DVD player. In this case, a new drive should solve the problem.

• Equium A60 - 191 wireless lan mini pci

  Hello
  I have a Toshiba laptop Equium A60-191.
  I wanted to know if I can install a wireless LAN card mini pci on this model. Does anyone know the procedure.

  Thank you
  Vikram

  Hello Vikram

  I found the information that your device is not ready WLAN. This means that your device has no antenna WLAN. If you want to use the WLAN you must buy card PCMCIA WLAN or WLAN USB stick.

  Good bye

• Equium A60-191 - blue screen at startup

  Hello

  I have a laptop Equium A60-191. When I start it, I get a blue screen and it tries to re start it again. I started from my Windows CD and used the recovery console to fix the problem. He now works ok. However, the same thing that happened there are only 9 months.

  Has anyone seen this problem before?

  Thank you

  In my opinion, this kind of problem has thousands of PC users with all kinds of laptops and desktop PCs. really nothing exceptional and there is no reason that a why this happens.

  If now everything is Ok I see no reason to talk about this. Once again, if the same thing happen please report only and maybe we can discuss your problem.

  Bye and happy new year!

• The motherboard Equium A60 - 191 necessary UK provider

  About 8 months ago, I bought this toshiba Equium A60-191. I need another motherboard for it, everyone would be able to help because I can't seem to find suppliers for this. Cheers mark.

  Hello

  I think you should contact a Toshiba authorized service partner. They should be able to give you all the parts. You can find one here:
  https://EU.computers.Toshiba-Europe.com
  -Support & downloads - find an authorized service

  Good bye

• Equium A60-191: upgrade graphic integrated processor

  Hi, new,

  I was wondering if I could spend my processor integrated switch to something better (anything!) I have a TOSHIBA Equium A60-191 with an ATI Mobility Radeon 7000 IGP.

  Thanks (please answer)
  Thanks again!
  Oh and thanks again!
  Suddste000

  Hello

  as far as I know, it is not possible to update the graphics card in a laptop.

  Good bye

• Equium EA60-191: HARD disk faulty-need of replacement

  I have a laptop Toshiba Equium EA60-191, which has a Fujitsu MHT2040AT hard drive installed. This drive is on its way, and I'm having some difficulty in finding the same type. Does anyone know a compatible player that will work in this phone?

  Thank you

  You may not use the same drive to disk (from the same manufacturer). You can buy Toshiba HDD or even some other manufacturers. Important is that the connector is the same.

  Just for example: according to the specifications of the laptop, your A60 comes with 40 GB of HARD drive. You can get Toshiba MK6021GAS with 60 GB and it should work on your computer satellite phone.

  Good bye

• Equium A60-191: number of Modem - only an analog phone lines are supported

  My Equium A60 has been turned on when lightning struck nearby and caused the power supply turn off and turn back on.

  The OS is XP Home and my ISP is AOL. When I try to access the Net with DUN, I get the repeated error message:

  "Connected phone line is not compatible with this modem. Only analog phone lines are supported. »

  My desktop computer, which also uses AOL, always connects to the same phone line with no problems.

  I restarted the A60 several times; changed and I tried the 2 phone connection cables - both work; the phone line works very well; I reinstalled the driver provided on this site; removed the tick from the box that says to wait for the telephone line; verified that the modem is working and on the Device Manager list. All this is in vain.

  Convenience store suggests that COM 3 is not enabled. I don't see that com 3 listed in the device under Ports Manager.

  I tried Google and ASK with the error message. There is not a lot of posts, and it seems that the Toshiba modem is actually an Agere. This fact seems to be the object of some of the complaints.

  Finally, I uninstalled the driver/modem, AOL and another DUN connection. I restarted and went through the process of installing AOL and "new hardware". While the modem is on and allegedly working... I am still unable to connect to the Net. I reinstalled an additional 'pay as you go' ISP. When I try to dial a number on which it generates error 680. It does this even when the box is unchecked, to wait for a dial tone.

  I would be very grateful if someone could help it. I'm out of ideas.

  Thank you very much.

  Hello

  You are right, the modem supports the Modem Agere chip.
  You won't find the COM3 in the Device Manager for the modem uses a non-real com port. It s virtual com port.

  I think you should start the diagnostic tool test and check if the Modem has no malfunction.
  Additional you must remove the connection in the region Select utility and after restarting again create a new.

  I also found useful Microsoft article on troubleshooting network and dial-up connections.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/trouble_all.mspx?mfr=true

  and you'll find info on the error of DUNS 680:
  http://www.Modemsite.com/56k/duns680.asp
  http://PHP.iupui.edu/~aamjohns/trouble.html#no tone

• Update drivers for Equium A60-191

  Hello

  I want to update my drivers - especially my display driver I often get an error message saying that my "ati2dvag display driver has stopped working properly", leaving me with a low display resolution. I reboot and I told me that Windows has recovered from a serious error.

  I just be a part of this site was updated drivers, but my model is not listed.

  Can anyone help?

  Thank you.

  Hello!

  Have you looked in the Archives?
  There, I created all the drivers:

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  * Archive *-online satellite-online satellite A-online Equium A60

  Good bye

• Equium A60-155 - no disk activity HARD and black screen

  Hello

  I reinstalled just WXP on the cell above and everything was fine until I downloaded and installed the site pc diagnostic tool. Restarting the laptop but there is no HARD drive activity and the screen was black after a few minutes it turns off.

  If I insert the Windows XP Home edition CD, and restart the CD turns upward but still a blank screen and no HARD drive, all activity ideas!

  > I reinstalled just WXP on the cell above and everything was fine until I downloaded and installed the site pc diagnostic tool. Restarting the laptop but there is no HARD drive activity and the screen was black after a few minutes it turns off.

  To me it seems very strange that the laptop is dead after the installation of the diagnostic tool. I think that it s only a setback.

  If you are not able to boot from the CD and the laptop doesn't display anything on the screen, then it looks like a serious hardware problem.

  Maybe the motherboard, CPU, or memory modules are dead.
  It's really not easy to tell what's exactly wrong

  I think it s time for an ASP.

  See you soon

• Equium A60-191: which driver should I solve software problems

  Updates MicroSoft screwed up my OS and I had to get it reinstalled. When it has been reinstalled, I had to reinstall XP as I had no BONES at all. This means that has been reinstalled XP with SP2. Other nearby things I lost all the registry entries for the software on the laptop - despite the fact that the HD has not been deleted data or programs. Although my data are listed under other 'user '.

  A number of drivers have been "lost" and I don't have Toshiba recovery disc (s). That's why I was download the 'obvious' drivers missing. However, some things do not - work as no notification of the battery status in the system tray.

  Neither the Fn keys working.

  It has been suggested that some of the things Toshiba must be downloaded before SP2... If so, how can I sort this problem please?

  It is not clear what drivers on the drivers Equium page are those which are necessary and in some cases, an insufficient description is given: for those of us who are not wise wordly on computers. So unless I can tell that something is missing for example I discovered with my modem - I don't know what I need and what I don't.

  If anybody out there can help with suggestions for what software/drivers, that I need to fix this box or how to get around the order of driver download problems, I would be very grateful.

  Thanks for looking

  Hello

  I just recommend to install ATI Chipset + Display Driver V6.14.10.6430 as a first step, before you start to install the other stuff listed. As written Jasmine make sure that you have installed all the Toshiba designed the tools and utilities in the correct order. I think that all the FN functions will not work correctly.

• Equium A60-191: I can put a wireless onboard network card?

  I can put a card wirles on Board at the top of this tower. mIf so what is the part number.

  Concerning

  Nick

  Hi Nick

  I put t know if your device is ready WLAN but I know that some Satellite A60 laptop computers come with the Atheros AR5001X WLAN card. More info on this map, you will find under http://www.atheros.com/pt/ar5001X.html

  I imagine that the WLAN card slot is placed somewhere under the keyboard and I put t know if you can built in one card. It will be interesting to check if it has WLAN antenna cable.

  If you don t have experience with laptop disassembly please don t this ourselves.

• Equium A60-191: application control status of the battery in the system tray?

  I had to reinstall XP. This has caused the loss of pilots and probably other things that I don't know.

  One of the elements lack seems to be the software or driver? for the battery. The battery is cooler at full power. The software located in the system tray used to indicate the power status and if it is ac or dc connected.

  Any suggestions that I need and where I can get to fix this, please?

  Hello

  I know you don t need the drivers or software for charge the battery to full power. Only what you need is the Toshiba Power saver utility.
  This utility is very useful because you can set different power for portable use different modes. For example, if you disconnect the laptop computer of the energy-saving AC adapter will automatically switch to the mode of energy that has been configured for the use of the battery.
  These methods help take care of the battery and increases battery life and it shows a battery status in the taskbar
  But there is nothing to recharge the battery witch.

  In my manual, I found a lot of info on the battery and how to manage the use of the battery. I think that the same information you will find in your user manual. Check it out.

  The last possibility is a malfunction of the battery.
  But in this case only a battery replacement will solve your problem.

  If you want you can try to check if the same thing happens with the new battery.

• Cannot find COM port in my Equium A60

  Hello

  .. I equium A60 - 191 and want to connect the cisco router 2500... com port can not find in my laptop...
  How can I connect...

  Can you please report the State of the hardware in Device Manager? Is this all is well?