EQUIUM A60 bed burned DVD but not CD and not all Audio CD

Similar Questions

• Equium M50 can burn CD but not DVD - power calibration error

  Hello

  Well, basically, that's my problem. The other day I tried to burn a dvd but kept getting the "power calibration error" tried different DVD and burning software, but still the same problem, although I can burn DVDs perfectly.

  Any ideas anyone?
  Thank you.

  Hi dude

  Unfortunately, this doesn't sound good.
  Power calibration error is known to me and it seems that there is no other way to replace the CD/DVD drive with the new.

  According to the error message is unable to calibrate s lens by car in the right position and that's why the drive can't handle certain mediums.

  See your owner's manual for compatible CD/DVD players.
  If you want you can also control the caught player in charge of a partner of service authorized in your country.

  Good luck

• "some" but not all audio appear

  So I will try to edit this pre-made mp4 file that I downloaded from youtube, however a few seconds of audio appears. It is also important to note that it seems choppy and bugs before it finally cuts. As you can see in the screenshot that I downloaded the audio is in the preview of the project but short cut in the timeline panel. I also confirmed that the audio in the file works by testing the file in QuickTime player. not sure if I'll be stupid or if it is some sort of glitch. But yes, any suggestions on how to fix or even to get around this would be useful.

  

  Use Adobe Media Encoder to transcode the clip to a good intermediate codec with the sound quality.  I like Quicktime movies in JPEG Photo, Animation, PNG or ProRes 422 codec.

• Windows Media Player will burn a data CD for us but not an audio CD.

  Windows Media Player will burn a data CD for us but not an audio CD.  We have Vista Home Premium with Service Pack 2.  Tried another brand of CD, slower burning speed, etc., but still does not.  And can not uninstall Windows Media Player and reinstall.  Help!

  Hi KathyDobrowolski,

  1. were you able to burn an audio CD before?

  2. what type of file you want to burn?

  3. This only happens with a particular file type?

  4. are you able to burn CDs with any other application?

  5. you receive messages or error codes?

  If the song file is protected by the rights of use, these rights may allow for playback of the song on the computer but prohibit burn them on a CD. If the Information button appears next to the song in the burn list, click the button to see more information on the issue.

  For more information, see the following link:

  Burn a CD or DVD in Windows Media Player: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

• can read DVD but not CD but I have previously tried many ways, but in vain

  It's something that's happened recently, I can still burn DVDs but the CD is not recognized at all

  Hi tommytommytom,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. what happens when you try to insert the CD in the drive? You receive an error message?

  4. What is the number of brand and model of the DVD player on the computer?

  5 have you tried the fixit tool provided in the previous post?

  If the previous suggestions don't fix the issue, then I suggest that you install the updated drivers for the DVD player by visiting the site of manufacture of the disk and check if that helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD/CD drive will read DVD but not CD

  My DVD player plays DVD but not CD.  Whenever I try to play a CD, the player is a kind of hum noise.  Finally, the Player opens and a popup tells me to insert a disc.

  I tried a system restore and the automated Microsoft fixit tool.  Nothing has worked.

  I use Vista Ultimate.

  Any ideas?  Thank you.

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite A50 will record on Dvd, but not on a CD - power calibration error

  My Satellite A50 will record on Dvd, but not on a cd. It happens with power calibration error after about 5% of the record.
  The drive used to save at all!

  --> Power calibration error is a mistake known to me.
  I've read on various sites several suggestions and comments and the power calibration error appear because the lens of the drive can not calibrate correctly.
  It is a hardware malfunction and unfortunately nothing :(

  You will need to replace the drive

• To play DVD but not CD

  I can play DVD but not CD, what's the problem?

  I can play DVD but not CD, what's the problem?

  ===============================================
  It looks like your optical drive may must be repaired or replaced.

• Model BDP-S350 will play the dvd but not a blu - ray disc

  So far has never had a problem with my blu - ray player.  The last time I used the player, I watched a dvd movie.  I tried t watch a disc blu - ray today and I kept getting the error message "cannot read disc - unknown.  I tried 5-6 different blu - ray discs.  I made sure that the firmware has been updated and I followed the troubleshooting guide.  Nothing has worked.  It will play DVDs but not blu - ray discs.  Does anyone have a solution?

  Hi jfniep!

  You mentioned that he doesn't play Blu - ray discs? Can I know the title of the Blu - ray disc movies? It's happening on all Blu - ray discs you include those who played before?

• Firefox manages not to display images much (but not all) on the Web sites that I visit, certain images are displayed and some are not even if they are in the same format.

  I recently changed my ISP because I had connectivity problems. Especially my router would be closed sporadically. As part of my attempt to identify issues, I ran some spyware that I was told that I could trust. Since then, I have a problem looking at many websites as much (but not all) images are missing, even on websites that I know very well, including my own. What is odd, is that on one site each page has an image jpg under the navigation bar and all these jpg appear except for one who does not even appear when I reload images. This problem also makes security of sensitive sites as my amateur full site look Bank that scares me. The problem does not occur on other web browsers.

  What spyware software do you run?

  Make sure that allow you pages to choose their colors and you have not enabled high contrast in the Windows accessibility settings.

  • http://KB.mozillazine.org/Website_colors_are_wrong
  • http://KB.mozillazine.org/Websites_look_wrong
  • Check the permissions for the domain in the active tab in "tools > Page Info > Permissions.
  • Check that the images are enabled: Tools > Options > content: [X] loading images automatically
  • Check exceptions in "tools > Options > content: Load Images > Exceptions.
  • See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).

  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes
  • http://KB.mozillazine.org/Images_or_animations_do_not_load

• Playlists imported, but not all the songs won't matter

  I exported my playlists my macpro mnt lion and when I used my thumbdrive to import on my macbook pro (mavericks) some, but not all the songs from the imported selections. It just says: the files can be found--just before this that I imported the entire library, so I know that my whole library is on the macbook pro.

  Some files are mpegs and some are AAFC, but there is no correlation with what files are transferred correctly as its both.

  MacPro (mnt lion)--> macbook pro (mavericks)

  You must transfer your complete (in one piece) iTunes folder, which should include all your media files and your iTunes library database (where are stored the data supporting such as playlists, ratings, play count, date added, etc.).  Then iTunes on the new Mac looks like iTunes on the old Mac, with all your songs and playlists, because you use the SAME library. you do not add your media files to a new library.

  If you want more information on how to do it, instead of your playlist Exim problem troubleshooting, please post back.

• Help! I did a movie with pictures on Movie Maker, played very well. Now, it's just to show Xs red in the photos of some, but not all. What I am doing wrong?

  I did a movie with pictures on Movie Maker and played very well.  Now, it's just to show Xs red in the photos of some, but not all.  What I am doing wrong?

  When you save your project, and then rename, move or delete a photo next time you open your project, you will see a red X where the photo was. Just a click with the right button on the X and select Remove then import your photo again under the new name or location and click on save project on the file menu.

  In the menu task under finished film click Save to my computer tracking instructions and your project will be saved as a movie.

• How I see people online, but not all of then in the hub?

  How I see people online, but not all of then in the hub?

  Bar open access (full up/down, or right click)

  The 2nd button on the bottom right, only online.

• OTP-S5100 plays all mp4 files but not all srt subtitles

  Using a Mac OS X and PS3 Media Server software I play all files mp4 video, but not all srt subtitles files that accompany the video files. Little game, some do not. The mp4 format is the same in all the mp4. So Mrs.

  Ok. Thank you.

• Menu Widget provided with Muse shows some but not all my submenu items.

  Menu Widget provided with Muse shows some but not all my submenu items.

  Here is the site on catalyst: http://cgfnewsite.businesscatalyst.com/index.html

  The problem is in the submenu of the media/articles.  It only shows two and there are many others.  If you go to the page you can see all the links. I have the page hierarchy properly set up in the title of the page articles with titles.  I've even shortened to see if it works.

  Under the videos link all sub links appear.

  Any help would be appreciated.  I code a little, but I'm not very good.  So please be technically.

  Thank you!

  Go to outline view, click with the right button on a page "invisible" and

  (1) make sure, that under 'menu options' the point 'include the page with hypertext links' is enabled.

  (2) choose the option 'Page Properties' and check 'Page Properties/Options', the "Export Page" element is turned on.