Equium A60 webcam problems

Similar Questions

• Equium A60-157, problem after update BIOS 1.90

  Hi all!

  I've had my Toshiba Equium A60-157 for two months. I've updated the my bios twice. First of 1.70 to 1.8 C and from 1.8 to the current 1.90 (common at the time I made this post).

  I noticed that as soon as I used my recovery DVDs to restore the laptop to the default constructor, I had a problem with the main user account that is normally created after the completion of the recovery strategy.

  Whenever Windows would open a session after the recovery account generated, a popup would display a message similar to the following:

  "Windows can not load the profile and connects you with a temporary profile." No changes will be saved. "

  He also said that this problem was maybe due to incorrect permissions, or something like that. The pop-up window also contained a 30-second countdown before opening in windows with the temporary profile. As indicated by the pop-message no changes would be recorded. I could even change my user account image.

  I ran it again the DVD of recovery only to get the same problem. This NEVER happened when I ran on the original bios 1.70, bios recovery DVD AND 1.8 c.

  Anyway I came up with a solution to this problem, which only caused me no problem at the present time.

  I just logged into Windows mode without failure, entered the account administrator, created a new account and deleted the account of departure (created at the end of the recovery program).

  So far, the user account-wise, everything back to normal.

  If the recovery strategy or the bios did not cause this problem, I would be grateful if someone could give me some possibilities of doing just that.

  I don't want to get updates of bios from 5-10 down the road, only to find out that my recovery DVD does not work.

  Fact the DVD should be updated as well as the recovery bios?

  Thanks for your time.

  Hi, Conrad

  Can you please tell me why you do the updates to the BIOS? Have you had any problems? I use my unit for close to two years and I didn t make any BIOS update so far. If everything works well, it is not necessary to do an update with the exception of some Microsoft updates that make the OS more secure. Don t do any update if it is not necessary.

  In any case, I am very confused with your question. Normally, Recovery DVD should not be updated. The BIOS updates are useful if there is a hardware conflict or a problem and not a problem using the operating system or any software.

  It will be interesting to know why you're doing the recovery procedure each time after BIOS update.

• Power power on Equium A60-157 problem

  My father recently corrected this laptop for my children to use, but we are having big problems with the battery.

  When the laptop is plugged in and turned off the battery recharge, when I turn on the laptop, the battery is displayed on the status bar as hip system and load, but it actually reduced by about 4% per minute.
  If I remove the battery and try to run the laptop from the network, it won't work, and if I press the power button again to once, with no battery, turn off all the leds on the front.

  I tried to uninstall the ACPI using Device Manager and reinstalled, but it did not work
  I tried another battery, but that didn't work
  I tried cleaning the contacts, but it does not work
  I also tried to blow out the fan in the air (from below! I did not open the case again)

  Can anyone suggest what could be the cause of the problem, I can see, it is a common problem according to the various forums, but I can't find a cure yet.

  I have an another a60 - 157 of the spare parts, but a problem is suspected with the motherboard.

  Thanks in advance for any help.

  > If I remove the battery and try to run the laptop from the network, it will not work
  It isn't okay mate
  Even if the battery is disconnected, the laptop needs functions related only to the power adapter too
  That is why I don't think its something wrong with the battery, but probably the motherboard is faulty.

  What to tell: A60 is old new motherboard would have costs a small fortune, not very well if you want to spend the money to get new motherboard in my opinion its worth it to buy the new notebook as to spend 200-300 for the new motherboard.

• Equium A60: Some problems with DVD Super Multi Player

  I have problems with my DVD drive. When I try to load anything (CD or DVD) it will open a blank Explorer window even though I know that something is on the disk.

  Sometimes, windows gives me the error message

  "D:\ is not accessible.
  "The operation could not be performed because of an I / 0 error.

  I have the latest drivers for it.

  How it works again?

  Hello

  Please, remove the drive from Device Manager. After restarting again the operating system should recognize the drive again. Maybe this procedure will solve this problem.

  Good bye

• Problems with the graphics to Equium A60 driver

  Hello everyone,

  First sorry for my bad English.

  I have some problems with my graphics card driver. After a new installation, I wanted to just install the driver for the ATI Radeon 7000 (I have an Equium A60), after that, I noticed that my pc was down. The problem was because the driver, I'm sure, because after a fresh install, without the drive VGA, my laptop works, somehow... I mean, I don't know it might work if the graphics would have a clean driver better.

  I searched on the web and saw that it was not a new problem; many people have the same problem with it. Somehow, the driver of the computer is not compatible.
  Could someone help me find a solution to my problem?
  Thank you very much

  Eurytheus

  Sorry my friend, but your ad looks really amazing. Driver Toshiba of origin is not compatible with the hardware. It cannot be. It cannot be the truth!

  Your model of laptop is almost 4 years and I assume that Toshiba had enough time to react if the display driver is somewhat problematic. I recommend you to backup all your data and try to install your laptop using original recovery image. If there is no hardware problem notebook should work again well.

  Sorry, but I don't see another solution because the pilot is certainly tested and it should work.

• Equium A60: USB Hub problems

  I have an Equium A60 and that you just bought a USB 2.0 with 4 ports hub, but it is not recognized when plugged into one of the usb ports
  It causes also the PC hang on shutdown and startup
  Hass someone at - it had similar problems

  Hello

  As far as I know for some USB hubs, it is necessary to install a software that can help to use correctly. Some of them are plug and play devices and there is no need to install any additional software.

  I use Satellite 1900 and also have USB hub and it works correctly. In my case, it was necessary to install the driver before the hub is connected. A demon of the mine has Belkin hub and in his case, the driver has been installed after that the laptop has recognized a new hardware component.

  All this is based on the producer of hub. I hope you have some instructions how to connect the hub to the laptop on the right feel.

• Equium A60: CD and DVD reading problem

  I have a laptop that uses a carpet Equium A60 * a UJ-811 t dvd/cd-rw. For some reason any all of a sudden when I play a music CD or a DVD it jumps slightly. On audio, it's like a constant ripple, and the video jumps a few images every few seconds. Don't have an idea why its doing so. Any help appreciated. see you soon

  Hello

  He s strange. It s easy to tell why it occurs. For me, it looks like a constantly driving rotation. You have other problems to drive with no media music or a movie?
  Other possibilities that you can see are the properties of the drive.
  Please see the properties of the drive. You will find a hardware tab. Please select here your player and press the properties button. In the Properties tab, please check if digital playback is enabled. You should also try to disable this option and check if this problem occurs again.

• Equium A60-155: ATi Mobility graphics card problem

  Hello

  I have a laptop Equium A60, recently I am getting error informing messages than the "display driver ATi2mtag has stopped working properly.
  I have reset my machine as told to do the error dialog box. Reset works fine, but the laptop crashes to the desktop, when turned off and on again once I get the Safe Mode screen.

  I reinstalled the driver for the graphics card several times, and the error persists through safe mode. The returned error and trying to open in safe mode, the machine flashed a blue screen of death, too fast for me to read, even applied for each of the available options. I was unable to cross this safe mode selection screen.

  As a last resort that I reformatted my laptop, using the Toshiba CD recover but the error persists, with regular driver display and the actual machine crashed.

  Since the reformat, I reinstalled the display drivers, and the problem persists.

  I downloaded the drivers from this site and the problem is still there

  You know a possible fix or solution to this problem? I am a competent enough and user of computer knowledge, so do not be afraid of getting technical in your response.

  Thank you

  Jake Houghton

  Hello

  This problem occur immediately after the operating system starts or after several usage time?
  If this issue occurs after a several time of use, so it could be an overheating problem.
  In this case, you should check the cooling modules. Check if the fans are working properly.
  Try to clean it with the vacuum cleaner.

  If this doesn t solve the problem if you maybe there is something wrong with the graphics card and you will need to contact Toshiba service for assistance.

• Graphic 3D MathCad for Equium A60 problem

  Hi all

  I have problems with Mathcad MCad (2001 - 12 Mcad) work on Equium A60. After trying to do any kind of 3D terrain (land surface, for example) Mathcad crashes. This problem is only on my laptop. How can I solve this problem?
  Marina

  Hello Marina.

  Well, I put t have ideas why you machine has had problems with this software, but first of all, you should try to update the graphics driver. If the problem of images fixed the same, so you should contact the manufacturers of MathCAD. Maybe they got patches. I found this site: http://www.mathsoft.com/services/technical_support/

  Good bye

• Equium A60 - problems of severe graphics

  I own a ' Equium A60-156 532 P4 / XP HE/256 MB / 40 GB/15TFT/DVD SuperMulti ' which I've updated with 512 MB of ram, so now it has 640 MB of Ram for system with 128 MB for graphics.

  My problem is, even if it meets the requirements of apparent minimum configuration for various games (such as "Fable: The Lost Chapters"), it does not correctly display in the game. The grass is white, yellow water, unreadable text, etc etc...

  I don't like the graphs such as shading and ripples in the water, I just like it so my laptop actually displays the right colors during a game!

  I tried the latest driver from the Web from Toshiba, the Windows Update site AND even sought the drivers on the ATI site with no luck.

  My laptop is doomed to be the trash and not play games or is there soemthing I can do?

  Hey Joe,

  Unfortunately drivers grpahics for your laptop has been deliberately out of engineering to prevent the graphics chip to produce too much heat.

  As you probably know, the graphics chip is integrated on your motherboard in order to reduce the space and there is no separate cooling. Graphics drivers are tailored to remove those aspects of the functionality of the chip which would tend to produce too much heat.

  It is generally true that the latest games tend to use features that were omitted in the drivers from your laptop.

  Unfortunately, there are no eassy solution to this problem as pilots of the last chip manufacturer won't load properly on your laptop without changing.

  I suggest that you try the latest drivers for your graphics chip of http://www.omegadrivers.net/, but beware your graphics chip to overheat as this can cause the pertubation requiring a new mainboard.

  Kind regards

• Equium A60 CD/DVD Drive problem?

  My cd/dvd on my laptop Equium A60 drive seems to have stoped working. If I put a disc in the drive of the yellow light on the drive flashes then nothing happens. If I go to my computer, that the drive is most recognized either, and only the hard drive is displayed. I recently downloaded the bios update and I don't know if it affected it?

  Can someone tell me what happened or how to fix it?

  Thank you very much

  Hello

  Please check if Device Manager the drive occurs.
  Try moving the drive and reboot your device. The operating system should recognize the drive again.
  Please post again if the problem persists.

  Good bye

• Problem loading on Equium A60-157

  I have an Equium A60 who until recently worked perfectly. The battery was empty until it stops. Now the battery will not charge when the AC lead is plugged in. Amber led on front stays THERE no matter how long he remains connected.

  The indicator of battery level in the Control Panel, power options, tab said power meter battery is at 0%, critical and in charge, but does not load. I tried to charge it for more than 24 hours with laptop on and even turned off but nothing. I can't understand what causes this problem.

  Any help would be appreciated.

  Hello

  It s very strange however.
  I see only two possibilities of malfunction.
  The battery is dead and you need a new or motherboard failure there.
  But in my opinion it s battery failure

  Check if the new battery will solve your problem of load.

• Problems of layout for the keyboard Equium A60

  Hello people... I had a problem with my laptop, if someone help me...
  My computer is an equium A60, the keyboard layout is: English Kingdon, because I bought the laptop in England last year... but I moved from my country - brasil and I can't configure the keyboard to use the Brazilian Portuguese accents, I tried so many different layouts page, but no one worked... so, how can I get additional support for sorting? I've already sent an email to toshiba brasil and toshiba England asking for help, it is very important...
  Thank you very much...

  Hello

  If you want to add the input language, Portuguese (Brazil), you can choose between Brazilian ABNT and Brazilians ABTN 2. Have you tested the two solutions?

• Problems on Equium A60 - Powerpack adapter beeps

  Can anyone help? A few days ago the Liteon Pack power supply / adapter for my Equium A60 (EA60-156) started beeping and my battery stopped charging! LED to indicate the connection plug is more lights and my battery is dying slowly.

  If anyone has had this problem before or know what happened. This is the adapter or the laptop that broke?

  I plugged adapter Satalite Pro L20 a friend to my Equium and the network LED lights or, even if two adapters are 19V and provided by Toshiba! This suggests to me that the internal battery can be ruined?

  I can't find all of the resources on the web to help solve this problem!

  Thank you

  Hi Mike,.

  It is unlikely to be a problem with your internal battery. Your A60 should work quite happy to power even with the battery removed. The fact that you do not get the power LED when you connect two charger shows that it is likely to be a problem with the socket on your A60 or with internal electronics that control functions AC (battery etc.).

  It would be a good idea to have the device controlled by your partner to the closest authorized Service to verify what is exactly the problem.

  Kind regards

• Equium A60 does not recognize the USB webcam

  I just bought a creative vista more webcam and tried to install it on my laptop Equium A60, the software is installed properly and everything but when I connected the webcam to the usb port my laptop didn't recognize it.
  I tried to uninstall and reinstall and nothing has changed. Someone has an idea of what could be bad?

  Hello

  Sometimes USB devices can be recognized correctly because of the low power from USB ports. Usually, USB devices should work with 500mA of power. It is a standard. But sometimes the USB devices need more than only of 500mA. In this case, you can use an external USB hub with external power supply.

  You can also disable the power save option in the device under USB root hub Manager.
  You will find a power management tab. Please enter in this tab and disable the option: allow the computer to turn off this device to save power.

  D this on all the USB root hubs