Equium L40: Cannot depend on the wireless Lan card

Similar Questions

• Windows xp on te2000 cannot detect the wireless LAN card

  I have a portable te2000 that the wireless lan card is detected as PCMCIA MTD-0002.
  I downloaded the drivers, but once again I installed windows will not use it. I get the error code 10.

  How can I make it work?

  The wireless port is enabled, but it has an orange light (not green) no idea why?

  Thanks in advance
  Ken.

  Hi Ken

  Use this original device ORiNOCO Mini PCI Card (comes with) or if you use an additional card? The unit is pre-installed with the original recovery CD?

  According to the specifications of error 10, you should try to update the WLAN driver.

• Tecra M3: Cannot connect to the wireless LAN

  Hi all

  Since yesterday I have a problem with my wireless connection:
  When I turn on the without orange wire the led light show but on the network connection, the message is: 'Not connected' and try on icon Office not start and display a red cross.

  Why? Where is the problem?
  I have upgrated readers... but not found
  Before yesterday, the connection worked fine.

  Help me please :-((

  Thank you

  Hello

  I put t know what icon on the desktop you want to say but perhaps you intervene on the Wlan icon that appears in the taskbar.

  In any case, to establish a connection to the wireless LAN laptop side switch must be enabled and you must also use the FN + F8 key combination to switch to the WLan.

  Did you check that?

  By the way; If there is a software problem, I recommend to use the System Restore tool and reverse the operating system to the beginning.

  Good day

• Re: Equium L40 - Windows 7 and the wireless switch

  I upgraded my Equium L40 to Windows 7 and now, wireless equipment and F8 function switch switch the WLAN on and outside. It is permanently.

  Also, even if it is enabled in the Windows 7 power options, close the lid won't be thecomputer to sleep. If I close it turns off the screen but doen't make Windows 7 options.

  When I upgraded to Windows 7, I chose the option to do as a new installation and therefore lost my Vista installation.

  I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.

  Is there something else I need to do for the WLAN switch and cover works with Windows 7? Any help gratefully received.

  See you soon,.

  Ray D

  > I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.
  What L40 you exactly (L40 - xxx). I just want to check if your model of laptop is fully supported for Win7.

• Hanging of L20 SP while the closure of the user of the WIRELESS LAN cards

  I have 2 new laptops on network Satellite Pro L20. They work ok until the user disconnects from the network he and the machine hangs on 'close network connections. It powers up and down without problem when not connected to the network. I have Win XP SP 2 all win updates installed, all upgrades to the bios and drivers from the Web site.
  I need HELP.

  How can I check and do? It's always the same suspended on the closure of the network connections and I have to hard start the computer to restart, even if it does not start finally if I leave it for 10 minutes.

  Hello Sio

  Believe me, that's not easy to say why just because your unit LAN configuration does not happen to us. First of all you should talk to your network administrator. He is the person who knows how it works in your company.

  I put t know if you have a few files for sharing. It is possible that someone is using the data stored on your laptop and in this case, only the laptop cannot cut connectivity. What is your IP address (the one defined where you get it automatically)?

• Portege 3490CT: operating system cannot detect the wireless network card

  Hello
  Portege 3490CT with windows XP

  Problem: Try to install the wireless lan card. Windows is not able to detect the new hardware.
  Details of LAN card are NETGEAR 54 Mbps, model WG511v2

  Specifications for lan card
  It is 16-bit PCMCIA and CardBus 32-bit compatible and works in any available PCMCIA or
  Location CardBus. IEEE 802.11 g and b standard wireless technology.

  Specification for laptop Portege
  PC card slot supports two Type II or Type III PC cards; R2.01 PCMCIA, CardBus, PC Card16

  all tracks on this will be very useful
  Best regards
  Ashwani

  Hello

  What the BIOS has been installed on your laptop?
  If you use the Toshiba BIOS so there could be an option called configuration of the device.
  (it s is available on my Satellite)

  You change the option for all devices, you will be able to change the PC Card controller mode. I think you should play a little with this option.
  In other cases, the user was able to resolve a similar issue by changing this option.

  Please report if you re successful because it would be very interesting for me.

  Good bye

• Satellite A30-104: WLan not available - I turn on the wireless network card

  I have a Toshiba Satellite A30-104 with an inprocomm ipn2220 built in wireless card. The problem I'm having is that when I get a network says its not available and asks me to turn it on.

  The driver is installed for the card, the switch for the wireless is set on you and I pressed FN & F8 and yet led remains off and nothing happens.
  I watched autour and seen that some people cover the terminals 11 and 13 and it works but not too sure.

  I also should this problem with a new card or is there a way to fix this?

  Any help much appreciated.

  Hello

  I guess that you upgraded the wireless lan card later, didn t you? I know that 11 + 13 pins hint and it worked, but after awhile the card did not and the connection quality was so poor that I bought a card atheros on ebay and this card works really well. So I suggest that you are looking for a card atheros on ebay and to install such card in your system since the cards are known to work properly in the toshiba machines.

  My configuration: Tecra 9100 with P4M and Atheros 5005 G MiniPCI card

  Welcome them

• Pavilion P6 - 2176 s: update the ralink 802.11n wireless LAN card

  Receive a pop up saying that there is an update for ralink 802.11n wireless LAN card.

  Is - essential?

  Bad experience with the update of things that were not crucial.

  Thank you!

  Hello @css321,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about the way your computer displays a pop-up message prompting you to update the installed wireless card. I'd be happy to help you in this case!

  If you encounter any issues connecting to a wireless network on your computer, I wouldn't count the update as crucial. If your computer is having problems connecting to the network, even if the problem is intermittent, it may be a good idea to install the update.

  I hope this helps, and if you have any questions or concerns do not hesitate to post back!

  See you soon

• Re: How can Equium L40-156 - I turn on wireless?

  Help, please!

  Toshiba Equium lL40-156 swich wireless or FN + F8 will not activate the wireless feature.

  Never used it before, but the light comes on.

  Hello

  If you want to enable the wireless network adapter, you must move WLAN switch in position ONE and then use FN + F8 key combination to activate the wireless network card.
  I don't know what you mean with your last assignment, but if install you Vista again the WLAN card will be installed properly and should appear in the Device Manager.
  When you're done doing what I wrote and I am sure that the WLAN adapter is enabled correctly.

  Good luck!

• Equium P200 does not recognize the wireless network with Win XP card

  Dear team

  I recently installed windows XP on my Equium P200 (he had originally vista).
  Now, I have a problem with the Atheros wireless card. The computer does not recognize the wireless card is installed. I tried uninstalling the drivers and reinstalling, but nothing works. In the hardware Manager, I get an error code 10 when you try to install the drivers. Can someone please help.

  Thank you

  Are you sure that you have an Atheros WLan card installed on this laptop computer at 100%?
  I recommend you to check the bottom of the unit. There are labels with information about the wireless network card! I think that there is a number. Then google for this number and you should get information on the wireless network card.

  Eventually he s one card Intel. | In this case, you should try to install the driver from Intel.

• Update the wireless LAN, satellite 5200 701

  Hello
  I have laptop Satellite S5200-701 and it has built in Bluetooth (PA3121U_1BTM), also wireless device evolving as written in the book loads. Now I want to move the wireless LAN and I have this tip:

  I need to change my Bluetooth device with another which has two facilities (Bluetooth & Wi Fi) or I need to upgrade the software only?

  If necessary to use the different device, how this device connects to my note and what is the serial number?

  Hello

  You re right. The laptop is scalable WLan. As Lucky has already said you need a card WLan minPCI like this:
  PA3212U-1MPC wireless LAN card

  At the bottom of the unit, you should find a cache location WLan, which is fixed with a screw.
  Here, you can connect the minPCI wireless network card to the Board of Directors. 2 cables must be connected as follows:
  White HAND and the black cable to THE

  PS: You can switch between BT and WLan with FN + F8

• Pavilion Elite e9220y - I am unable to move the different a PCI slot wireless LAN card.

  I need to move up to the next PCI slot Atheron wireless LAN card so that I can install a new Radeon 6770 GPU. However, when I move the LAN card to other to slot machines, the PC will begin to start but then give a white screen with a green bar at the top. If I move the map LAN back to the location of the bottom, it starts very well and allows me to connect to Windows.

  Any ideas would be appreciated, I have tried as far as I know do.

  Thank you.

  Other specifications:

  Windows 7 64

  AMD Phenom II X 4 910

  8 GB RAM

  Motherboard - H-RS880-Μatx (Aloe)

  I agree, in the meantime I decided to switch to a USB adapter so that I can move forward toward the front. Thanks a lot for your help.

• I have an 802.11n wireless Lan card and the strength of the connectivity is poor however my laptop compac has excellent connectivity which can do to get a good signal

  I just bought a new PC (foxconn) who has a 802.11n wireless Lan card, my connection is very poor but my connection on my laptop compac and iPad are excellent. Is there a way I can get a better connection with this lAN card?

  Hello

  Check with the assistance of FoxConn, their documentation and online drivers. Don't assume new products
  have up-to-date drivers.

  Are all Windows 7 computers?

  The router may also need a firmware update so check with its creator.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Wireless network adapter cannot connect to the wireless network

  When I start my PC HP TouchSmart it does not recognize my wireless network.  It says wireless network adapter cannot connect to the wireless network and the details said network adapter "Local network connection * 16 ' does not work properly. The strange thing is that if I leave my computer for a few minutes, then restart it twice, it recognizes the network and starts working. Frustrating is that I have to do this everytime I turn on my computer.  It takes at least 10 minutes of starting and restarting my computer before it will recognize my wireless network.   Any help?

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Help to install the driver for HP 620 Wireless LAN Card?

  I need help to install the wireless network card. I can't access the internet on my main computer, but the error States:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  OS: Windows 7 Home Premium

  How was the problem: simply, I restarted my computer and wireless network card no longer works

  I need this laptop for work, so if someone could help me as soon as POSSIBLE, it would be grateful.

  Hello:

  Here is the link for the driver you need for the Ralink WiFi card in your laptop:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4158863&swItem=ob-102451-1&prodNameId=4158501&swEnvOID=4059&swLang=13&taskId=135&mode=4&idx=2