Equium L40 - lost sound in the headphone

Similar Questions

• I have no sound card, so, how can I get the sound to the headphone,

  I had to reload XP on my Dell T3400. I don't have a card's equipped. I used to listen to music through the headset by using media player. Now the media player won't say I have no sound card, which I did not.

  I am able not to circumvent the "no sound card" and send sound to the headphone jack or better yet, Jack green at the back of the computer.  It used to work before I formatted, but I don't know what I did before.
  Thank you very much

  I solved the problem. I have downloaded a driver sound (Soundmax) and now it works fine.

• I have Annoying problem, I can hear the sound of the headphones and portable speakers...?

  I recently bought (Dell inspiron 3537), windows 7 64-bit (6.1 build 7601), more info on first image,.

  http://i.imgur.com/SBEezVe.PNG

  but I have a problem when I have a headphones connection to the laptop... the headset works well, BUT I can hear the sound of the headphones and computer speakers posing problem, I want to hear the sound of the headphones only, see the shot of images >

  http://i.imgur.com/lpkKxMp.PNG
  http://i.imgur.com/MXmP6FL.PNG
  http://i.imgur.com/WCpTZCI.PNG
  http://i.imgur.com/ikDKvr1.PNG
  http://i.imgur.com/UIYDAVD.PNG
  http://i.imgur.com/nsrreYQ.PNG

  can you help me please?

  1. open the Device Manager and right click on Realtek High Definition Audio.

  2 Select this option to "Update driver software".

  3. click on "Browse my computer for driver software".

  4. click on "Let Me pick from a list of drivers on my computer".

  5. put the "Show compatible hardware" check box if not already checked.

  6. in the list of devices, click on 'High Definition Audio'.

  7, click on "next".

  8. in the update driver warning box, click 'Yes' (the driver).

  Install the native driver. Immediately test the headphones/speakers.

  If the list of drivers to step 6 do not include "High Definition Audio" then please use the Windows system restore. It is quite safe to use because if you don't like the results, you can undo the restore operation.

• Re: Equium L40 - Windows 7 and the wireless switch

  I upgraded my Equium L40 to Windows 7 and now, wireless equipment and F8 function switch switch the WLAN on and outside. It is permanently.

  Also, even if it is enabled in the Windows 7 power options, close the lid won't be thecomputer to sleep. If I close it turns off the screen but doen't make Windows 7 options.

  When I upgraded to Windows 7, I chose the option to do as a new installation and therefore lost my Vista installation.

  I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.

  Is there something else I need to do for the WLAN switch and cover works with Windows 7? Any help gratefully received.

  See you soon,.

  Ray D

  > I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.
  What L40 you exactly (L40 - xxx). I just want to check if your model of laptop is fully supported for Win7.

• MacPro 2009 suddenly lost sound and the start-up time is more than a minute

  Hi just a couple of days my MacPro in early 2009 has started to take well over a minute to start when she used to take less than 30 seconds.

  Around the same time, I lost the sound of my Analog Audio Line out port.  (Don't know if there is any connection.)

  I can still use my head set for its ok when plugged into a USB port.

  When I go to the sound pane there is no visible line output port.  I have a Boise radio connected to the line port, having the sound transmitted by the intermediary for the auxiliary voltage on the radio.  It has been working well for many years.

  I tried to plug into a spare set of powered speakers, the choice of output Line Out appeared in the pane sound but still cannot get any sound from the speakers when I chose it.

  The loss of the noise is a nuisance, but I can still use my head set.

  It is the slow-start up that bothers me, although once it has finally started the computer works very well and reacts quickly.

  Something has changed dramatically, and I feel that something happens and it doesn't bode well for me.

  Hope someone can give me some good news and a difficulty.

  Thank you

  Try to open disk utility and repair the drive.

  Also, consider posting a report of EtreCheck. This can help us to get to the bottom of your sound issue as well. http://etresoft.com/etrecheck

• Cannot retrieve Equium L40-10 after changing the HARD drive

  Equium L40 - 10U Windows Vista 32 bit.

  I had a problem with the HDD (120 GB MK1237GSX) & I replaced it with MK2576GSX - 250 GB)

  I have a the original Toshiba product recovery disk, but I can not reinstall the s/w.

  Windows will load initially and then diskpart seems to be installed OK.

  The installation hangs at Image X for Windows
  I get error 23 c:\programfiles\adobe\reader 8 - data read failed.
  Image X could not apply to Vista F:\05468XSP.swm Index 2 to C:\.

  In addition, the administrator screen shows:
  Failed to initialize the Raid class.
  ANY RIAD continually normally

  I'd appreciate any help with this problem.

  Thank you

  Jim

  Do you use the disc of recovery for the first time?

• Equium L40 - lost wireless connection

  I have an Equium L40-156 under Vista and wireless became intermittent. The switch light would go out or maybe turn on at startup. In the end, I did a restore of the entire system from scratch and installed the latest drivers (Realtek) wireless.

  This seemed to cure the problem and it has been fine for the last 2 months. However, the light is now out again (it was working an hour ago), and there is no wireless connection.

  I tried a restore of the system and also installed the latest driver from Toshiba, but I still can't run. I hesitate to start over again once it takes all day to load programs and updates. Can anyone suggest what I can do or is this another bug of Vista?

  Great news

• Satellite M305D: No sound through the headphones but the speakers don't work

  Hey,.

  I have a M305D I reformatted and installed Vista Ultimate. I installed all necessary drivers.

  However, when I plug the headphones in the headphone jack I have no sound in headphones and the loudspeakers continue to play.

  I don't know if the socket has worked before I refomrated.

  So I can't tell if it's a pre-existing condition.

  Assistance on the issue of the helmet would be greatly appreciated.

  Hello

  Have you tested with another helmet?

  Maybe the little switch that is part of the headphone jack works not properly and doesn t switch between speakers and headphones.
  In this case the question would be related to hardware

  I m not very well if this problem could be related to a malfunction of the software, but it would be really interesting to know if the problem persists after installing the OS from the recovery DVD.

• Equium L40: Cannot depend on the wireless Lan card

  I tried to turn on my abilities wirelesss using FN + F8 as shown in my manual, however when I run a search for wireless connections to repeatedly get a message saying that the wireless features are not lit and it fails to correct the problem.
  I use an Equium L40.

  Any help much appreciated.

  Hello

  I don't really know what you're doing wrong. The fact is that WLAN card must be turned on in the same way on all Toshiba laptops.

  At the first switcher WLAN to on the situation and after doing this light WLAN must be turned on. After you do this using FN + F8 key combination and make sure that the WIFI is enabled.

  So now you should be able to use the wireless network on your laptop card. Open ConfigFree application and choose RADAR to locate the WLAN in your area.
  I do the same on several laptops at home (old and new models).

• Internal speakers work but no sound when the headphones are connected.

  Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

  Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

  Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
  Lists of control pannel/sound/speakerproperties
  control information
  Realtek High Denifnition
  Reatek'a

  Jack information
  LR ATAPI internal ATAPI
  LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

  some levels are muted
  Advance tab default settings
  quality of studio 24 bit 48000 Hz

  boxes of exclusive mode checked (when it is disabled, that no sound was heard)

  Information appears a jack was pluged into and when unplugged.

  the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

  computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
   
  I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

  With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

  My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

  Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

  Check with the manufacturer of your system's support and their forums (if any).

  Have you checked on the website of the manufacturer of the device for the latest drivers?

  Realtek - HD Audio Codec Driver right side
  http://www.Realtek.com.tw/

  Download - SAVE - will click with the button straight on and RUN AS ADMIN

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  Rob - bicycle - Mark Twain said it is good.

• IDT Audio - no sound in the headphones - solved

  I recently had a problem that many reported having and I have since found no definitive, validated, fixes here is what worked for me...

  The problem was that I could hear from the speakers, but not in headphones when I plugged. After reading the other partners community messages (...) and the "Jack FAQ" message by Jimco I went to check if my problem was a HW or SW problem, but he went to this subject in a different way.

  I tested Ubuntu Live Desktop 12.04 startup to test whether there is sound in my headphones with a replacement driver, Linux and found that speakers and headphones normally apply in Ubuntu - so, obviously a SW problem.

  After you restart the computer and start back to Windows, I was surprised to see that the problem has been fixed in Windows as well.

  --

  Here are some more:

  -After detecting the problem in the first place, I rebooted the system several times (with two headphones in and out) without result, so there start Ubuntu which somehow solves the problem, not simply to reboot the system.

  -To detect the problem that I've been playing with different distributions of Linux (PartedMagic, BackTrack), so it is quite possible, one of them had caused the problem in the first place. (My current best theory is that there is a kind of a "logical switch' in the ITD firmware which can be handled without precaution to produce this behavior and has been reset by the Ubuntu audio driver.)

  --

  I would although he could someone having the same or similar problem try and confirm if this procedure (start in Ubuntu Live Desktop 12.04) help...

  A possible solution was picked up from another forum:

  -> "Playback devices".

  -> For each device:

  -> Right click---> Properties

  -> advanced---> uncheck the box 'allow applications to take exclusive control of the device.

  -> Restart

  I think that the IDT Control Panel may not be switching between the speakers and the headphones correctly, but others will have to test. I hope this helps.

• Laptop play outloud sounds when the headphones are connected.

  I have a laptop HP Pavillion with Windows 7 Home Premium, with a built-in microphone. I use my microphone on my computer to make Skype calls using the Skype program. I plug the headphones in my phone to hear what other people are saying in my Skype calls, however when I do this, other sounds coming from my computer are read aloud and do not get played in my helmet, so all those who are in the call to Skype with me can hear some sounds I play my computer.

  I would make sure all the sounds my laptop plays at all always go in the headphones and do not always play outloud as not to disturb the other memebrs in my Skype calls. Please help :( Is there a solution to this?

  Hi Swtgirl9314,

  Method 1:

  Step 1:

  In troubleshooting the problem, you can follow the steps below.
   
  a. Click Start, type Sound in the box to start the search.
  b. click sound in the results of search at the top of the start menu.
  c. click the reading notice the check mark next to the default device. For most users, the default device is pregnant, change of helmet. Make sure that the audio settings are configured as expected.

  Step 2:

  On the Read tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.

  Step 3:

  On the Read tab, select the playback device, click on configure and make sure that the configurations are set correctly.

  Method 2:

  If the problem persists then I suggest you to apply these below mentioned steps to cut all other sounds when windows detects a communication activity.

  a. Click Start, type Sound in the box to start the search.
  b. click sound in the results of search at the top of the start menu.
  c. click the Communications tab.
  d. click on the radio button according to your needs, under when Windows detects communications activity.

  After completing the steps above, you can check the issue.

  For troubleshooting you can visit this link below.

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• No sound from the headphones and speaker sound is crackly and distorted

  Original title:

  Audio problems

  Taken my headphones do not work when I plug in the headphones and the sound of my speakers is now crackley and distorted, any help?

  Hello

  1. have you tried to connect the headphones on another computer?

  2. What is the brand and model of headphones?

  3A this works much earlier?

  4 you did changes to the computer before the show?

  Method 1:

  Run the audio Troubleshooter that might help us diagnose the problem better.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2: Show disabled devices and headphones as a default value.

  Exercise the functions mentioned below to set the headset as default:

  a. go to Start and click on Control Panel.

  b. click on her, then a new window will open.

  (c) in the new window click on the "read"tab, right-click in the window and then click Show disabled devices. "

  d now check if the headset is listed there and right-click on it and choose allow.

  e. select headphones and click on ""as a default ". "

  Check if it works.

  In addition, see the following links:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  I hope this helps!

• Satellie L500-1CQ - sound of the headphones and speakers at the same time

  When I plug my headphones in the sound plays with my speakers and my helmet. My headset is not broken and they work elsewhere.

  Hello

  Have you tested other headphones or external speakers? If this isn't the case, you should do this!

  In addition, I miss important information about your operating system and the audio driver. You should try to update the audio driver. The latest version, you can find the Toshiba site.

• Equium A60: No sound on the unit

  I recently bought a toshiba laptop from a family friend, unfortunately I can't get any sound what work so that ever, check audio devices, that seems not recognize all its material, so I guess I have to download the driver.

  I looked on the site for this, I can't seem to find it anywhere. Alls that I know the model Toshiba Equium A60, cannot find anything else as Exxx or anything like that.

  Anyone able to help. Know were I'll be able to get the correct driver.

  Thank you

  Hello

  Have you checked the State of the sound card in Device Manager? Please check first and see if the sound card is that there are enumerated and installed correctly. If so, check the button for the volume control on the right side and also all sound properties.