Equium L40 - lost wireless connection

Similar Questions

• Satellite L500 - lost wireless connection

  My Satellite L500 recently lost the wireless connection. I looked towards the top of the Realtek wireless device in Device Manager and it says that the device is functioning properly. I tried to use "ping 192.168.1.1" join the router, and I get "error Transmit - general failure."

  Any ideas?

  Hey Buddy,

  And now Windows recognize some WIFI networks at your fingertips? Your validation lost wireless connection isn't very useful

  You should try a WLAN driver update that you can download from the official page of Toshiba:
  http://APS2.toshiba-tro.de/WLAN/

  If you can't find or connect to WLAN networks deactivate in the Windows of the WLAN power save mode power profiles. You will need to set for maximum performance.

• My laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection

  I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it.  Then I have to reset the automatic Wireless Configuration to find my wireless connection.  Whenever I stopped him it and I have to choose.  This does not happen on another laptop or desktop that I have.  Is there a safe solution for this?

  Hi Ron,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  You can read the following article and check.

  Windows wireless and wired network connection problems

  If you use Windows XP, then read the following article:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  This problem can also occur when the power management profile turns off your network card.

  You can try the following steps and check if it helps.

  a. click Start, type device manager in start search and press ENTER.

  (b) in Device Manager, expand network adapter.

  c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  d. go to the power management tab.

  e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.

• Equium L40 PSL41E: Wireless not connect host process not put end to

  Recently, I got a blue screen on this laptop crash after that get a message telling me a host process had ended.

  The computer is running Vista, so I expect problems when my parents bought my sister this laptop.
  In any case despite the frequent blue screen stop messages, etc.. When I get the message telling me that the host process put an end to my wireless connection gets messed up.

  The last time I used windows: diagnose why Windows cannot find network option and was quickly informed that my wireless was turned off (despite the fact that he was actually turned on) and that the computer would automatically turn back on.

  After that it worked fine for a few days until I had another stop of host process and the computer crashed once more.

  This time, the computer refuses to connect despite the use of the above method and the ConfigFree(Connectivity Doctor), fix the connection etc.

  I give myself the possible Solutions are:

  Check the communication device for bridged settings you may need to disable the bridge or reconfigure. a 15.

  It is certainly not the problem.

  a-9 Move closer to the wireless router.

  Even once is not the problem, I'm sitting next to.

  a-10 tour of all bluetooth devices or other devices that may interfere.

  There are no such devices near to.

  a-11 Check to check a microwave oven is not in use is close.

  It is not in use.

  a 13 make sure that the maximum number of devices connected to the access point is not exceeded.

  Well, it worked for 6 months before that, so I do not know is not the case.

  a 37 to ensure that filtering by mac address of the access point is configured correctly.

  I don't have any idea what it means. But my cell phone girlfriends works very well with the wireless connection.

  a 19 restart the router/access point

  Done several times.

  Well, good suggestions. Fire now that I'm all ears.

  Hello

  I put t know why a host process has stopped working, but to my knowledge, the process could be svchost.exe.
  However, the issue seems to be related to the Vista OS problem

  I see that you have tried to solve this problem, but without being successful, you also get a BSOD so I think it's a serious problem of software and you must first use the Toshiba Recovery CD to reinstall the operating system on this laptop.

  After the new installation (would take about 15 min) update the operating system to the State.
  Then you can try to reconfigure the wireless network

  It's worth to try ;)

• Equium L40 is not connecting to internet

  I have an Equium L40 it does not connect to internet with wifi or the head of the ubs.

  The laptop comes up:
  Internet Explorer has stopped working
  A problem caused the blocking of the program works correctly.

  It says it is connected to my wifi bt hub and has a signal strong.
  Why it will not connect either cable or WiFi?

  Any ideas.

  Steven

  Hello Steven

  It is not easy to provide a response based on the description of your problem.
  If you use connection WLAN make sure wireless network adapter is installed, enabled and configured correctly.

  USB cable? What type of USB cable do you use?

• Toshiba Equium L40 - 10U Wireless does not

  I recently updated my Toshiba Equium L40 - 10U to Service Pack 2 for Vista and now my wireless does not work. I tried to update my driver - but its already been updated, checked for updates - all installed, ensured this driver has been activated. Yet I still can't wireless to work, I don't know what to do now!

  I checked my network connections and my wan (PPPOE) miniport is disconnected when you try to connect it comes up with ERROR 815. Then I have to make sure that my internet connection options were correct - do not establish a connection and do not allow the proxy server and still get this message.
  My BIN is Realtek RTL8139/810 x Family Fast Ethernet NIC (do not know if this is useful or not) I tried to turn it off then try and turn it back on? But do not know if that would improve the situation or not.

  Hello

   
   
  (1) do you have made no changes before this problem?
  (2) what is the exact error message / complete you receive?
   
  Method 1: Follow the steps in the following articles and check if they help.
   
  Step 1: Safe mode with networking 
  See the link below and check if the problem persists in safe mode with network.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
   
  Step 2: If the problem does not persist in Mode safe mode with networking, I suggest you to put the computer in clean boot mode and check if it helps.
  Clean boot mode
  A clean boot to check if startup item or services to third-party application is causing this issue.
  Try to install the updates in clean boot mode, and check if the problem still persists.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After completing the troubleshooting steps, please refer to clean the start link to set up your computer to normal startup mode.
   
  Method 2: Follow the steps in the below items to Disable Antivirus and firewall and check if it helps.
  Step 1: Turn off the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Step 2: Turn Windows Firewall on or off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
   
  Method 3: Uninstall and reinstall the drivers
   
  You can also try uninstalling and reinstalling the drivers who can help you further.
   
  Also see the links below for assistance.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  List of Error Codes may appear when you try to establish a dial-up connection or a VPN connection in Windows Vista
  
  http://support.Microsoft.com/kb/923944
   
  Hope this information helps.

• Equium L40 - unable to connect via wifi or cable plugged ubs

  Hello

  I have an Equium L40. I can not connect via wifi or cable plugged ubs.
  It is a "Internet Explorer has stopped working. a problem caused the blocking of the program works correctly.

  He said in am connected to my hub and have a signal strong.

  Can you help me

  Thank you

  Steve

  Hello Steve

  Have you tried using another browser?
  Using Skype or some other messenger? None of them can connect properly?

  I put t know what is the real problem. Work not Internet Explore or WLAN connection in general?

• OfficeJet Pro L7780: Printer lost wireless connectivity

  The printer (which worked before wireless) has lost the connection to the router (wi - fi) for wireless printing and can not find the router when you run "Wireless Wizard". Have restarted the printer several times, but no chance connection. Summary diagnosis said the network name 'failed '. (I have with other devices wireless connectivity). The Configuration Page shows wireless status is disconnected and shows all zeros for the IP address and the subnet mask.

  Need suggestions on what to try next. Thank you.

  Turn off the router and back on again was! Printer has now found the router and is wireless printing. Thank you very much!

• Equium L20-197 - wireless connection problems

  Have an old Toshiba laptop Equium L20 - 197, running windows XP Home Edition.

  It contains an Atheros AR5005G wireless network adapter.

  The problem I have is that it will connect to my BT home hub (and says that the connection is excellent), but does not connect to any Web site.

  I added a USB 802.11 wireless adapter g to see if I can get a connection there, and it works very well (even if it is interesting only by using the wireless utility Ralink that comes with it - when I tried with the automatic Windows Wireless Configuration, I had the same problem as before - no internet connection - switched back to the Ralink utility and it works fien again).

  Internal wireless adapter worked fine, but now do not - any suggestion welcome.

  Thank you very much

  Rob

  PS I went to Device Manager and check the updates of pilot, but he told me that he found nothing better than the used version of the driver!

  Hello

  There may be some conflicts between internal WLan card and the new external 802.11 g Wireless USB adapter.

  If not, you should check the configuration of the Atheros AR5005G wireless network adapter.
  In the Device Manager-> card WLan-> properties-> Advanced tab, you can change the WLAN standard 802. 11 (A B G) on the same which is used by the router.

  If the router uses 802.11 G can change this in the Wlan settings too!
  Also check the channel. I put the channel on my router and the wireless network card to 11.

  You can also try to connect to the router without using a WLan encryption. Of course, this should be done only for the test.

  Las, but not the least, update the driver WLan:
  http://APS2.toshiba-tro.de/WLAN/

• Satellite L450D lost wireless connection

  I have a laptop Toshiba L450D and just put Win 7 Pro 64-bit on with a clean install and downloaded all the drivers and install them BUT now I can connect only to the internet will open the Earthnet cable connected.

  Any help please?

  Hello

  Your wireless network card is recognized correctly in the Device Manager?
  Do you see a yellow exclamation mark in device-> network cards Manager?
  Check it!

  If there is a yellow exclamation points, it means that your Wlan driver was not installed.

  The right WLan driver can be found here:
  http://APS2.toshiba-tro.de/WLAN/

• Kodak printer lost wireless connection.

  I have an ESP 6150. I installed the software and it woked fine wireless. I reboot my computer and when I go to print, it gives me the error that the printer is not connected to the usb port and will not be printed. It's on my Vista laptop. My other 2 desktops with XP do not have this problem. Where I'm going wrong?

  Repost in this forum for appropriate assistance: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP Photosmart B209a - lost wireless connection

  I use the printer above and it worked perfectly on a BT Home Hub 2-57GM. I recently added a Time Capsule from Apple in the network and now use it as my default around the home wifi even if it is connected by a cable to the BT Home Hub. I operate two apples two OS x 10.6.8

  I ran a report on the printer problems and the only 'FAIL', it's that the printer settings were not consistent with the settings of the wireless router. If I change my wifi on the home hub original only it still comes back with the same error message.

  Any ideas as to what I should do?

  Make sure all your devices are connected to a router, probably the time Capsule.  The BT home hub will give probably different IP addresses that the router from Apple.  The BT Home Hub will probably give 192.168.X.X.  Apple will probably give 10.0.X.X.

  If the B209a has the wrong IP, reinstall it, connect to the router from Apple.  Make sure that the wireless BT is disabled (recommended) or has a different network name.

• New router, lost wireless connection

  Hello

  I have a wireless photosmartplus B209 printer and recently changed my router, now I can't send the printer to one of our laptops. I know the ssid and the new router network key, where can I get these to get the printer to print wireless? Have spent hours on this nothing will do, any suggestions gratefully received! I'm computer semi-literate if not bad words please!

  Thank you in anticipation

  rogerthelodger

  Since you reset the printer back to factory settings, you will need to go through the USB to the configuration wireless again. Looks like you already know this, but it gives you problems. I would uninstall the software and the driver for the printer from the computer. Once you have done, you will then be able to install the software and the driver for the printer again. When installing, it should ask you how you want to install the printer. Tell him you want to do a wireless installation. Installation should then ask you if the printer is already on the network, or if you need to connect the printer to the network via a temporary USB connection. Choose the option that uses a temporary USB connection. Who should return you to printing. I will include links to the document that will help you get this all sorted. Let me know what happens.

  Uninstalling the printer software

  Installation of the software of the printer on a wireless network

  HP Photosmart full feature software and drivers

• Equium L40 - switch wireless and F8 command does not

  Hello world

  I have problems with the wireless button after I took my laptop apart to clean. The wireless button won't light up at all and only would light up. When I press fn f8 nothing happens. I don't know what I did. The wires are correctly in place, as far as I can tell. I tried the following things:

  Uninstalling the card in the Device Manager and reboot
  Checked adapter is listed as working properly
  Do a system restore
  Check the BIOS

  I don't know what to do else would appreciate pointers. Thanks in advance!

  > I'm not sure what I've done.
  And what to say about that now?
  You, as the owner of the laptop, are not allowed to disassemble the laptop. You did this at your own risk. To be honest I n know how to help you now.
  > When I press fn f8 nothing happens
  I believe you that. You must activate the WLAN using the WLAN switch first. Place it in the position YOU. After doing this, you have to press FN + F8 and not only F8.

  When you do this you find flash cards and options for the WLAN?

• Satellite L450D-13 x - lost wireless connection and will not sign up to all the

  I have a Satellite L450D - 13 X, I was able to use the wireless until today where it has stopped working. No matter what I do, it says that the wireless device is disabled.
  I tried to update and diagnoses, but they all come back fine.

  Can anyone help?

  Try to restore OS to an earlier time using System Restore tool. Maybe some update Microsoft screwed up the WLAN functionality. Very often the driver WLAN is displayed as an option to update.

  Try this as the first step.
  Also try restarting your router.