EQUIUM U400 BIOS update link broken

Similar Questions

• Equium U400 - Bios does not blink

  Greetings,

  I downloaded the bios update tool to update my bios from 3.1 to 4.7
  [BIOS 4.7 | http://uk.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=UK&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 776 & selSho rtMod = 721 & language = 13 & selOS = 30 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 8 & is lectedLanguage = 13 & type = all & page = 1 & ID = 77400 & DISO =-1 & driverLanguage = 42]

  Tried running in windows 8 64-bit, but it stops at "bios flashing. Then I tried to go under windows 7 64 bit, but the result was the same. Tried to leave overnight, but it was still "Flash bios" after 8 hours. I had to reboot every time.

  No idea how I can Flash the bios?

  Equium U400 is not supported by Win, so I don t think you could improve the BIOS to win 8.

  As much as I know BIOS update requires some essential Toshiba software that must be installed.
  For example, the value of Toshiba additional package must be installed in order to start the update of the BIOS.
  I think you have goo channes update of the BIOS of the laptop running with factory settings. I mean using the system preinstalled by Toshiba.

  But why you want to update the BIOS?
  BIOS should be updated as a last possibility to solve the problems of the laptop.

• Satellite A660 BIOS update link does not work

  Hey, I got a message today (on Toshiba tempro) that the BIOS update is available.
  Unfortunately, the link does not work.

  I hope someone reads this part of the administration of technical assistance.

  Hello

  For PSAW3E:
  http://support.toshiba-tro.de/Tedd-files2/0/BIOS-20100920154827.zip

  Run as admin.

• Equium A60 BIOS update: what is the Boot Mode?

  Due to problems with my graphics ATI I have to do a BIOS update. To do my computer (Equium A60 PSA67E) apparently needs to be in mode 'start-up', NOT 'repeat mode '. In a previously sent forum somebody said the computer just "should be turned off" but I'm still not sure of how go to this mode. Is it just a case to go to the start menu, click on shut down the computer and turn off the computer again? But how do you know when it is in mode 'start '?
  Question: How do in boot mode? (I tried the update in 'safe' mode and it does not work)

  Hello

  Boot mode is meaning stop the laptop (BONE).
  It is important that the laptop is not in stand mode or hibernation mode.
  You just simply close the unit. That s all ;)

• Satellite Pro U400 - BIOS update gone bad

  Hi all!

  I've updated the BIOS on my laptop and something was wrong, just not now a computer screen.

  I went to see the Web for Chris Bios recover.
  Have over 20 versions, but so far without success.

  My biggest problem is: I can't save on floppy disk 2 MB BIOS. All attempts to create a
  Flash or SD ended in failure.

  The laptop is: Satellite pro U400 PSU45E

  Please help me... the laptop reads the floppy in BIOS with little experience (the ones that come with Chris Bios 500Ko - 1000 KB) begins with a normal boot beep signals supposedly provided a definition blocks then baar times short beep and nothing to do...
  There must be something... BIOS BACK small size, emulator USB... BIOS to be torn down, so it is possible in charge from USB, SD...

  Every idea can be useful!

  Thank you very much

  Excuse my English

  f the subject isn't here, please redirect mderatora
  This is my 1 post here

  Hi mate

  Unfortunately if something was wrong during the update of the BIOS, then you won't be able to solve this problem without the help of a technician of the ASP

  I hope that the ROM BIOS module is not too bad
  In the worst case that the mobo is damage but maybe it s not damaged

  However. You must contact a local ASP and must ask for the manipulation of the Fryer!

  Good luck!

• Equium A200 BIOS update start with an error

  I am trying to update Bios on my Equium A200, once downloaded and started to install the error say rom of good size file box.

  Can anyone help?

  I'm using Vista Home premium.

  Hello!

  Before update you the BIOS, you should extract all the files from the .zip file, otherwise, you get the same error as you.

  So, first extract all of the files and try the update of the BIOS.

  Bye!

• HP G62-b51EE bios update link is dead

  I have a laptop G62-b51EE HP with the bios to version F.46. I'm now trying to update the bios to version F.47 from the ftp://ftp.hp.com/pub/softpaq/sp52001-52500/sp52190.exelink, which is provided by this page template support ... http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96423-1&cc=us&dlc=en&lc=en& = web.

  Whenever I tried the link I found it dead and no way to download new version of bios claimed. HP deleted this file because it is unstable or contains errors? If so, why they leave his link in the support page.

  Thank you very much

  It's working now.

• Satellite Pro U400 BIOS update failed - what is the BIOS Boot-block access

  Hello

  My last update of the BIOS has failed and my laptop PSU45E PrU400 Satellite is now out of use.
  I want to use the recovery disk of crisis with a USB floppy drive, but I don't know the key combination to run the boot block.
  Is that someone can help me?

  Best regards

  Hello

  I was wondering what crisis recovery disk you have?  :|
  In my experience the special drive is required, which is available only for ASP technician
  That's why it of necessary to contact the ASP in your country to reflash BIOS.

  In my opinion you shouldn't t try recovery disks of the crisis who loves you in the net, it can drive to the mobo damage

• Equium L300 BIOS update

  I've just updated the BIOS on my L300 and after it reboots it starts to load windows then blue screens quickly and restarts continuously.
  Anyone can shed any light please?

  Very much appreciated...

  Great!
  Good news.

• Pavilion Media Center M8400f Bios Update for Windows 7

  HP Pavilion Media Center m8400f. The Vista operating system has been replaced by Windows 7 (64 bit) a number of years.

  I've updated one of my hard drives with a SanDisk SSD (it is now my main drive with the operating system and all my files on board).

  The bios on the PC has never been updated.

  The SanDisk SSD dashboard software will not recognize the SanDisk SSD as the system has designated the SSD as a SCSI device. I need to access the bios for this change to AHCI. The current bios does not support this.

  The PC has a card mother MCP61PM-HM. There is no update for Windows 7 BIOS for that motherboard I know (updates Vista only).

  　

  SanDisk gave me a link to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-82094-1&cc=us&dlc=en&lc=en&... that shows a card mother M2P61PM-HM for m8400f desktop PC. This Bios download supports Windows 7 (64 bit).

  Can update the Bios to download safely a card mother M2P61PM-HM for card mother MCP61PM-HM I currently have?

  Hello

  The HP BIOS update link provided SanDisk is an update of the BIOS of your PC. It is listed under Win Vista 64 bit driver downloads here.

  If you look at the site to download the drivers for your PC you'll only see driver support for Win Vista but on 2010-04-08, Version 5.29, 1.47 M BIOS updatedshows support for Win 7.

  But the problem is this: the BIOS updates must be performed using the PC operating system comes with; in your case, Win Vista. Extreme care must be exercised when updating the BIOS under normal circumstances. I would not classify your situation as usual.

  I saw others download an update of the BIOS for their PC and try to install an operating system upgraded with disastrous effects. The PC was bricked.

  Be prepared for the worst case if you try to install the update to the BIOS.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  Office 810-150se (Win 8.1)
  17 t - j000 Notebook (Win 8 upgraded to Win 8.1)
  H8 1380t CTO Office (Win 7)
  560z Desktop (Win 7)
  
  Other PC:
  Laptop Dell Inspiron (Win XP upgraded to Windows 7)
  Custom build: (Win XP upgraded to Windows 7)

• Equium A300D - after updating the BIOS screen is empty

  Hi, I did a bios update on my Equium A300D-PSAK2E and its bricks of my laptop! When it restarts after update screen is empty!

  Is there a a sort of way to launch a recovery of bios by pressing certain keys on the power on the image of the bios on a USB?

  Kind regards

  Dan

  Hi Dan,.

  Unfortunately I think that there is nothing you can do if the BIOS update gone wrong... In this case the ROM module must be reflashed to an authorized service because guys have special tools to do this process delicate reflash.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

• Equium A210 - after update BIOS problems connect to MSN Live Messenger

  Hello

  I just installed the latest update of the Bios for my Equium A210, as has been the first time results attempted this \i watched carefully and everything seems to go correctly but the laptop is restarted, it beeps and showed a checksum error, I chose the option to reboot with 'Default settings'

  Since that I got problems to connect to MSN Live Messenger and I wondered if this might be something to do with the Bios Update, it is also possible to 'come back' to the old Bios somehow?

  Thank you
  Lee

  Hello

  your question isn't really a related problem of the machine. The "Checksum Error" is normal after each update BIOS since the checksum of the BIOS which consists the BIOS settings and the version of the BIOS is not correct due to a modified version of BIOS.
  So, the next time that you update your BIOS you will get a "BIOS checksum error" again. Worry not Don t, it s nothing serious.

  With regard to your Messenger:
  1. uninstall the Messenger
  2. download the latest version from the MSN site
  3. install a new
  4. have fun

  Welcomes ;)

• Equium A60-173 does not work after bios update

  Computer laptop girls. A lot of windows screen blue/broken files. Who sets. Site Web de Toshiba says 1.8 bios c can stop it again - Web site also announces 1.90 bios. To go with this...

  Tried to Flash the Bios 1.90 which you have to do in the (stupid) windows. Naturally it hangs during the "preparing for the bios update", with only 15% of progress. WAITED a very long time (30-45 minutes) - no progress took place. Had to turn off the machine and had clearly not worked.

  Now the machine will even not respond to the switch. I was expecting a momentary start - but it's like the power switch has been disconnected. Actually attaching the power supply does not even turn on the power light!

  Can a flash failure turn off the machine so much?
  Or would it be another fault (as well!)?

  Thanks for the tips...

  > Not waited a very long time (30-45 minutes) - no progress has occurred. Had to turn off the machine

  Looks like you broke upward from the procedure of updating the BIOS and it's deadly!
  I put t see any other possibility as to contact the ASP in your country for assistance!

  Maybe you are a lucky man and module ROM on the motherboard is not damage and must be flashed only
  Please note that the update of the BIOS is risky! If you use an incorrect BIOS or update wrong procedure can damage the MB

• Equium A200-1VO: update Bios issue

  Someone at - it updated the Bios here with the latest offer.
  I wanted to do because the port for express adapter card seems to not work properly.

  But all I get is an error message - 120 of Winphlash saying the Bios is incorrect, but I downloaded it twice and double checked each stage.

  Equium A200-1V0 seems to belong to the series of PSAF5.
  Have you downloaded the BIOS for this series?

  In addition, you can check the label at the bottom of the unit. You should see the serial number too.

  By the way; I put t think that the BIOS update will solve the problem of port adapter express card.
  I put t know exactly what the problem is, but if you use the compatible and fully support the express cards then everything should function.

  Best regards

• Equium A60: After BIOS update device will beep several times and turns off

  Hello

  I downloaded the windows BIOS update for my Equium A60 (dated 11/15/05) and ran the executable by following the instructions, after ensuring that the current AC has been connected, etc.. The update has got a little more to halfway when the computer turns off suddenly.

  Now when I try to turn back on it just a few beeps and turns off again. It seems to me that the BIOS is screwed. Is there anything I can do to get my machine to run?

  Thank you
  Phil

  Hi Phil,

  Unfortunately, it seems that if the BIOS of your laptop is corrupted. Unfortunately, he didn't there has no easy way for you to correct yourself and you will need to take the phone to your nearest Toshiba Service agent who has the necessary specialized equipment to reflash your CMOS with a new BIOS chip.

  Kind regards