Ericsson F3507g broadband does not not at the controls AT

Similar Questions

• T440p - Ericsson N5321gw does not recognize the SIM card

  Hey, my new T440p with integrated WWAN Ericsson N5321gw does not recognize the SIM card. I am running Win7 64 Bit and in the Device Manager, I see the Ericsson unit without any error. Once I launche logins, I have the error message if there is no SIM card inserted and I have to insert the SIM card and try again. The SIM card is inserted as indicated next to the slot (although I tried in other ways, too). I tried two different SIM cards just to be sure, two SIM cards work in my phone. Any idea? Thank you very much!

  
  

• HUAWEL E1820 - stick Mobile Broadband does not work after installing vmware wks ver7.0.

  Hello

  I installed vmware workstation 7.0 trial version, after that installation of the sw, my mobile broadband does not or my pc not able to recognize the mobile stick.  The key mobile HUAWEL E1820 model is provided by Starhub in Singapore.

  If anyone can help on this?

  concerning

  ramke

  Manual startup type value VMUSBArbService (VMware USB Arbitration Service) and see if that helps

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Why Safary does not load the content of pages?

  Why Safary does not load the content of pages? I mean, when I hover over the places where should be the content, he is always showing the "redirect to: [email protected]/" lower left. My Safari is 9.5 and worked fine until Safe Fimder Virus get inside my computer. Mozilla Firefox is a bit slower. If someone could give me an idea on how to deal with it, I would be happy.

  Sorry if my English is not good, I am a Brazilian who is still learning English

  Your English is very good!

  Redirects are usually due to adware or malware.

  Download the run MalwareBytes.

  It of free and takes only a minute or two. Which should remove all adware and malicious software on your Mac.

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• the preview window does not show the document that I'm about to print in Sierra

  The preview window does not display the document that I'm about to print. This problem started as soon as I upgraded to Sierra. It occurs in many applications - including in Microsoft Excel 2011.

  

  

  Hello, David Bry1,.

  Thank you for using communities of Apple Support.

  I understand that when you try to print from a number of different applications, you do not see the preview of the document you are printing. I would like to assure you that I see the preview as well when I print. Let's see how we can get this resolved.

  I advise you to ensure that the printer software is up-to-date on your printer Brother DCP-7065DN. Please choose 'Available Software' brother printer and scanner software for macOS Sierra, El Capitan, Yosemite, and Mavericks

  If a software update is available, please install and then test and see if you get the same result.

  Have an amazing day!

• Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Michael T.L. says:

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• IPhone does not accept the code to check for text messages

  II phone does not accept the code verification for the transfer of messages text imac

  Maybe these articles will help:

  Get a verification code and connect with authentication to two factors - Apple Support

  If you don't receive your check or reset email - Apple Support

  If this is not the case, can you explain a little more detail what exactly is your problem?  Or see the 'Contact us' at the bottom of the second article.

• Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

  I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

  What is your indication that the DVD is not recognized?

  Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

  I did all the updates and it does not see the DVD in the DVD drive.

  If you put another type of disc in the optical drive, as a music CD, it is recognized?

• My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed.

  My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed. The plug in page shows the plug ins I installed. How can I fix it? This happened on my 64 bit Windows 7 partition. I installed the extension "classic add-on" to see if she could solve the problem. There is unfortunately no. I have a screenshot. I'm not sure if I have permission to upload it to the media gallery. I also use Linux, but I did not upgrade that are still there.

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons

• Why my master password does not meet the correct password, in that I get

  After you set up a master password in security settings constantly, he asked for it, but when I get in there it does not recognize the password. I wrote it down in order to avoid this problem. I don't know that it is the only one I chose. try again again and again did not help.
  Please help me. What do you think is the best way to solve this problem?

  Hello

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• Version 38.0.1 does not see the passwords stored in previous versions

  Version 38.0.1 does not see the previously saved passwords, and urged it to re - enter and save the password. After revert you to the version saved 31.7.0 pass back too. We have more than hundreds of copies of the program and all cached passwords, users do not even know what their password. This failure is a serious problem.

  Problem solved. Probably the file has been corrupted signons3.txt. I deleted the file, and the new passwords are kept. After this version of the software update and new version I've seen passwords, create a logins.json file and now everything is fine. On all other computers in the company such a problem does not arise.

• The document _ is on a volume that does not support the permanent version storage.  You will not be able to access older versions of this document once you close.

  I recently started getting this strange message, usually when a Pages document is closed:

  «The document _ is on a volume that does not support the permanent version storage.»  You can access older versions of this document once you close. »

  All my research (apple.com and on the internet) have not enabled all the information on this message.

  Hi Larry,

  The 'volume' is a hard disk, a partition on a hard drive or a storage as a USB device.

  OS X automatically saves your document frequent while you work on it. If the volume of the device / it records on a summer formatted to allow 'versioning', you will be able to use Time Machine to open previous versions of your document. If it has not been formatted like that, you get the message see you, and only the current version of the document will be saved.

  Kind regards

  Barry

• my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  Hello

  Follow the instructions here:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• 'webplugin' does not support the maximum safety level of safari plugins

  Last night, I got connected to my Svat security system using Safari and left the computer with the browser showing all the security cameras. Early in the morning about 3 or 04:00 I was awake by restarting the computer I noticed that the OS has been updated.

  For now, I am trying to connect to my security system and Safari can not access the server. I went into properties and noticed the ['webplugin' does not support the maximum safety level of safari plug-ins] my security system stop working in windows because of the plugins for a long time so my only option is to use my mac-mini to access the system and now what happens.

  The name of the plugin in the security system is called HiDVRPlugin.dmg and the system is Svat. I tried to go to Safari preferences and enabling the plugin, but it still does not work.

  Any ideas on how to re activate or difficulty this plugin?

  Thank you

  Go back to an earlier version of Mac OS X is not an option? Or may be using a different browser?