ERR 200279

Similar Questions

• CoreTelephony error in trace file as a file for coretelephony tracing operation has failed, perhaps you need more disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted

  I got this error:

  "CoreTelephony Trace file error
  A file for CoreTelephony tracing operation failed, you might run out of disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted"

  I tried to solve it by searching for CoreTelephony errors. Could not resolve yet.
  Software does not, especially of photoshop...

  Any ideas?

  Same thing here, iMac with OS X 10.11.6. All started a couple days ago. Have not found any valid solution online yet, I tried rebooting in recovery mode and check disk, but it seems that everything is ok with the drives and permissions.

• ERR connection refused for Chrome, Safari, Firefox (most Web sites)

  Hi all

  I am facing a serious problem of internet browser. Yesterday, I suddenly found a Web site connection problem with my MACBook Pro. Specifically, with all browsers such as Chrome, Safari and Firefox, I can't access most websites except Gmail, Youtube, Facebook, etc. All other sites gave an error "Err Connection refused". Surprisingly, I can connect to each Web site with other devices (Ipad, my phone) under this same wifi network... That my MAC did not work properly.

  Then I saw that it had some malware called power helperbar appeared on my site Web whenever I try to re - open my browser. Then, I used all that are available online to get rid of it... Right now, it doesn't seem anymore, but I still can't access most Web sites...

  I checked (I also changed to google DNS 8.8.8.8) DNS, IP, etc, and everything seems normal... At the end of the day, I reinstalled my Macbook system but the problem persists... I have really no more that I can do to fix personally.

  I ask the help of the community?

  Thank you very much

  Best regards

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  VSearch malware tries to hide by varying names of the files it installs. To remove it, you must first identify the naming model.

  1 triple - click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. The files that belong to an instance of VSearch will have the same date of change within about a minute, so they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Search in the folder with the name of all these forms:

  com.something.daemon.plist

  com.something.Helper.plist

  com.something .net - preferences.plist

  Here, something is a string, which may be different in each instance of VSearch random meaningless. So far it has always been an alphanumeric string without punctuation signs, such as "disbalance" or "thunderbearer."

  You may have more than one copy of the malware, with different values of something.

  There may be one or more files with the name of this form:

  com.somethingelseUpd.plist

  where George can be an empty string of sense that something different. Yet once, there may be more than one file of this type, with different values of Gisele.

  Here is a typical example of an infection VSearch:

  com.disbalance .net - preferences.plist

  com.thunderbearerUpd.plist

  You will have files with similar names, but probably not identical to these.

  If you feel confident that you have identified the files above, drag only the files - nothing - to the trash. You may be prompted for administrator login password. Close the Finder window.

  2. open this folder as in step 1:

  /Library/LaunchAgents

  Move to the trash all the files with the name of the form

  com.something.agent.plist

  where something is one of the strings that you found in step 1. There may be not all of these files.

  3. If you have whatever it is moved to the trash in step 1 and step 2, restart the computer and empty the trash.

  Do not remove the folder 'LaunchAgents' or "LaunchDaemons", or anything else inside of one or the other, unless you know you have another type of unwanted software and more VSearch. Records are a normal part of Mac OS X. The terms "agent" and "demon" is a reference to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  4 reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  5. If you do not find the files or you are not sure about the identification, after what you have found.

  If in doubt, or if you have no backups, change nothing at all.

  6. the penalty may have started when you have downloaded and run an application called 'MPlayerX' or "PDF Pronto." If there is an element with a name in the Applications folder, delete it.

  This Trojan horse is often found on the illegal Web sites that traffic in content such as movies pirated. If you, or anyone else who uses the computer, visit these Web sites and follow the instructions to install the software, you can expect more of the same and worse, to follow. Never install software that you downloaded from a bittorrent, or which has been downloaded by someone else from an unknown source.

  In the aspect of security & confidentiality of system preferences, select the general tab. The marked anywhere radio button should not be selected. If this is the case, click the lock icon to unlock the settings, and then select an other keys. After that, do not ignore a warning that you are about to run or install an application from an unknown Director.

  Then, still in system preferences, open the pane of the App Store or software update and check the box marked

  Install the system data files and security updates (OS X 10.10 or later version)

  or

  Automatically download the updates (OS X 10.9 or earlier version)

  If it is not already done.

• Satellite P300 - 17Q: Installation of VAP - ID-ERR-NOTINSTALLTVALTZ

  Hello

  When I m install the value pack added to my Satellite P300 race - 17Q Windows Vista 64-bit Edition, I get the following error:
  'ID-ERR-NOTINSTALLTVALTZ-MESSAGE' as well as installation is to undo the changes. My Bios is updated.

  Y at - it something with my software or is it also to someone else?

  Hello!

  Toshiba value added Package is for your model only available for Vista 32 bit, not 64-bit.

  Therefore, there is no way to solve this problem. You have to wait for a 64-bit version appear.

  Good bye

• P2055D: LaserJet p2055d - 49 Err 3D910C8

  Hello

  Since a week, 3 laserjet p2055d printer, I got the error: 49 3D910C8 Err when we want to start a print job. 3 printers at the same time. I think that next to an automatic update of windows 8.1.

  • There is no gosts jobs in the queue
  • I tried to restart the printer
  • I tried to uninstall (with uninstall process L1, L2, L3 and L4), then reinstall the drivers
  • I tried to uninstall and allow windows to recognize the printer
  • I tried to update the firmware

  I always get the error on the printers.

  When I Plug one of these printers on a computer with Windows 10 it works perfectly.

  Can someone help me? Cannot find sometings helping me on the Internet.

  Thank you very much

  David.

  Hi David,

  Sorry, I can't send. You can search it on google with dirver file name "upd-pcl6 - x 64 - 6.0.0.18849.exe.

  Good luck!

  Good bye.

• Satellite M30x: Cannot install the VAP - ID-ERR-NOTINSTALLTVALTZ

  Hello

  I have a little problem with my satellite M30x and Vista system. I need to change the cooling method to slow down the CPU fan, like I did in WinXP using Toshiba Power Saver.
  Unfortunately, the utility seems to be available for Vista.

  I tried to look for a solution that might be Toshiba precious package added. It is supposed to add the change of method option in Vista power settings, but I can't install the program - ends with an error "ID-ERR-NOTINSTALLTVALTZ-MESSAGE."

  General Council is an update of the bios, but the latest version I found - 1.90, video ATI - is already installed.

  Please, is it possible to get rid of the noisy fan without downgrading the OS?

  Thank you very much.

  I wonder where you found the VAP (value added Package) for this model of laptop.

  I checked the page European driver of Toshiba and found some drivers for 32 bit in archiving Visa
  But no. VAP!

  That's why I have only one explanation why this error occurs; you have tried to install this software that is NOT compatible with satellite M30X!

• Re: Toshiba PSA10E, 85% recovery and cannot open 'tosh_rec.err '.

  Hello

  I have Toshiba PSA10E and I am trying to reinstall the system.
  With the Nooteboom, I have 2 CD with Xp Home Edition Toshiba Recovery System.
  When I do install, go to stop and 85%, it is write: cannot open: tosh_rec.err

  I checked HD and RAM

  Any suggestion?

  Thanks for help

  Your Satellite A10 is old enough laptop model. I can't imagine that you use recovery CD for the first time now.
  Any suggestion? I see there two possible reasons: either is troublemaker HDD (but after your cheque probably not) or the recovery image (drive) is damaged and at some point not readable.

  If possible get CD Microsoft facilities for the installation of Windows XP Home edition. All the necessary drivers, tools and utilities that you can download at Toshiba download page under http://eu.computers.toshiba-europe.com

  Good bye

• Cannot load a required step of associates module Err :-17600

  the deployment of that image works fine in the dev system.

  but the deployment system "failed to load a required step of associates module Err :-17600" this error.

  I suspect it has to do with search folders.

  where I can change into a deployment machine the research file settings.

  Well, I tried a sample project (simple), but it worked on the maschine deployment.

  2. I use the classes & objects in my seq file. (I tried to take all precautions to play safe)

  There was a windows DLL missing in my deplyoment maschine 'msvcr100d.dll '.

  OR support helped me thr that I didn't have labview on my machine of deployment.

  & Dev maschine, everything was OK

• Why 'Read a fixed number of samples' help with the error 200279?

  Hello world

  It is a question about a tip found in the explanations on the acquisition of data error-200279. This explanation it is said: '... ". reading a fixed number of samples instead of all available samples can fix this... »

  AFAIK the DAQ system buffer is a ring buffer, so we can consider having a writing position and a position of reading "in motion" along the ring. While the playback position is the position of writing, everything is brilliant. But if writing catch up reading, samples will be overwritten and therefore-> error-200279.

  So here's my question:

  I do not understand why a fixed amount of reading samples would help me with this error. I don't understand why other Councils (increase in the size of the buffer or the frequency of reading) would help me because they reduce the probability of the playback position being outrunned by the position of the writing.

  But if I read everything which is available, whenever I read the only way for the buffer fills would be that the time between two readings take more time than necessary fill the entire buffer.

  Or in other words to each reading I will read at least as many elements that it has been filled by writing since the last read, so the only way to fill the buffer would fill completely at once since the last reading.

  This should be a lot safer than reading a fixed amount, because in this case, I'd get a problem if I read it that fewer items than writing complete at the same time, regardless of the number of items that would be and no matter what the size of the size of the buffer that would be.

  What I understand here?

  Thanks and regards,

  Sebastian

  SBach wrote: this VI is a State Machine in queue, the reading part is made in the case of timeout and cases are used as initialization orders, stop and change the outside DAQ hardware.

  That I can't tell when these commands will trigger the time between two readings could not be set. If a strictly fixed amount of data could lead to a buffer to fill.

  Init command: you certainly don't have a running task.

  Stop: You stop the task, then doing here if you get overrun.

  Edit tasks: you will probably need to stop the task still before you can edit the task, but let's go back to not caring.

  The way I see it, the other commands must stop the task anyway.  If you can leave the timeout do its job and do not do a lot of extra stuff.

  And here are some alternatives:

  1. use a shift register to keep track of how long your wait time should be.  In the case of reading, make the deadline to be whatever it is that you are using.  In all other cases, only the 0 so that a read timeout must be performed immediately (once the queue is empty).

  2. When you do your check to 1.5 times the timeout, if there is too much data, queue a reading at the front of the queue so that playback will happen.  The idea is that you really want to keep the same stack sizes to keep the memory to be allocated.  So just to be read more often.

• With a sampling of the data with DAQMX, error-200279 occurs when making 2d array dbl

  Hello

  I did a system of simple analog voltage with DAQMX data acquisition.

  It is made for reading of capacitance, where output capacitance value out of a circuit in the periodic voltage signal.

  What I want is to get data from four capacitors simultaneously through four channels, using samples n n (dbl 2d).

  The structure of my VI is almost similar with examples of continuous sampling of voltage in LabView, with the exception of a few other calculations in the loop.

  And for the synchronization of the trigger, I've corrected the edge of release with the external signal from the capacitance reading circuit.

  Version no. 1 has a channel for data input voltage. Version n ° 2 has four channels for the input data.

  While ver.1 can get accurate reading of four capacitors circuit data each (a single channel at a time),.

  ver.2 acquires four channels of data, with a single thin data channel, all the others were wrong.

  I saw a 200279 error occur in the DAQMX read part 2d dbl, so I tried increasing the buffers by changing the sampling frequency or the number of samples, but it wasn't everything.

  I rose for most of the forums with the 200279 error, but the solution would not work on mine.

  Anyone can find the problem? I will attach my screws it may include a bit of Korean language, but most of them are in English, shouldn't be too hard to recognize. Sorry for the inconvenience.

  Oh I forgot, my DAQ is NI USB-6259, and it works in Win XP sp3 and LabView 8.6.

  Thank you.

  Hello Azurenight,

  The 6259 is a DAQ card of the M Series Multiplexed, which means that it is not possible to sample each signal at the same instant, rather the channels are all sent through the ADC even and must be sampled in order. More information on this can be found here:

  LabVIEW Help: Multiplexing compared with simultaneous sampling

  http://zone.NI.com/reference/en-XX/help/370466W-01/mxcncpts/multisimulsamp/

  It may still be possible to get the data you need with the card you have - could you give more information about the maximum eligible period between samples on different channels?

  If you require * real * simultaneous sampling, you will probably need different hardware.

  Kind regards

• Error-200279

  I have a 6250 PCI card and a box of SCC - 68. I would like to use one of the analog inputs as a trigger signal to begin to acquire an analog signal and generate a pulse signal at the same time. It is used to measure the pressure exerted by a shock wave, which is a transitional event which happens very quickly.

  However, when I run the code, there is a 200279 error. I don't know why and how resolve it. Could you help me solve the problem? Also, I am a beginner on mx-acquisition of data. I will appreciate it if you could provide me feedback on the code. (I'm not sure if the output of the pulse and the start of acquisition is synchronized using the code of the current form. Also, since I put the acquisition function in a while loop, I do not know how the closure will affect the sampling frequency)

  Thank you!

  You can go through this link, in order to understand why you encounter the error.

  If I recognized properly, the error should be popping up by reading the "trigger signal.

  There could be several solutions, I presented two.

  Solution1: Move the DAQmx begin Task.vi inside the loop and make sure also that he should run only once, because you can't START one already STARTED TASK.

  

  Find attached VI (blast transitional acq_Solution1.vi) corresponding to above stated solution.

  Option2: Read these last available samples and let the former acquired samples to be crushed.

  

  Find attached VI (blast transitional acq_Solution2.vi) corresponding to above stated solution.

• Try to write data to the file, but error 200279

  I have problems when writing data to a file. 10 seconds in the recording process, I get the error 200279. I did some research on the subject, but I am unable to corect my code. I think I want to increase the size of the buffer, but he prefers, I suppose, to read the data more frequently. The way that I save my file is, before starting the VI, I attribute a location and name of the file (e.g. data.csv). The date and time is added at the end of the actual when file the I start to record the data (e.g. data_07-26 - 13_122615.csv). If the file does not exist, it creates a new file, and then adds the data of this file after each iteration of the loop. The reason why I did this way was so I don't have to worry about running out of memory, but apparently my code is wrong.

  

  

  I will include a copy of the faulty section of my code. Any help would be greatly appreciated.

  Thank you.

  Your problem is that the writing on the disk is slow.  It is pretty slow so it causes your DAQ buffer overflow and cause error and loss of data.  What you need to do is to implement a producer/consumer.  This will put the data acquisition and recording on the disc in separate loops.  This will allow data acquisition work at speed, that he needs to deal with incoming samples and writing on disk can run at all what pace, he can.  You send data from data acquisition to the loop of logging using a queue.

  You can also think about changing how you write to the file.  VI is constantly open and close the file, which is a very slow process if you do it inside a loop.

• Error 200279 and slow program running

  I read a lot of posts about this error but still cannot fix mine. During the execution of the program realizing measures of error 200279 turns suddenly upward. In addition, the program is very slow; I'm trying to read data from a QD and a PSD (two different position detectors) and when I move a detector (QD or PSD, it doesn't bother me) the program response is too slow. I tried to correct the error by setting the value for timeout - 1, but the error is still there. What can I do?

  Thanks in advance,

  Mercurial

  P.D.: Error 200279: tried to read samples that are no longer available. The requested sample was already available, but has since been replaced. Increase in the size of buffer, most frequently the reading of data or by specifying a fixed number of samples to read instead of reading all available samples would correct the problem.

  You need to understand why your VI is so slow.  It go fast then slow down over time?

  I see a lot of things that could cause slowdowns.

  1. a lot of Express VI.  VI Express is designed to facilitate the installation and quickly start code.  They are not known for efficiency.  FIX: Use the regular functions of LabVIEW such as DAQmx and file write.

  2. you write to a file within the loop.  File writing is usually slower than other functions.  Maybe your hard drive slows you down.  FIX: Use producer/consumer and transfer the file to write to another loop indepdendent.

  3. you build graphics XY in the loop.  Inside that express the VI, it is continually adding more data in the tables stored in the shift registers.  These berries grow, windows must track more contiguous memory to store the data.  Eventually, it would run out of memory.  What size are these graphs?  FIX: Sometimes delete these graphics.  (EDIT: I see that you have the "erase data on every setting turned on for that call.)  This may not be a problem.)

  4. you write to the nodes property of each iteration of the loop.  Changing the properties of controls can be quite slow at times.  FIX: Write to a property node where the properties really change.  True to the visibility properties Plot writing is really bad, because you do each iteration, that it never changes.  You may as well just outside the loop.

  Your code to see how long each iteration of the loop is actually taken from reference.  Turn the pieces to see if you can speed it up.

• HAVE DAQmx error-200279

  I run a loop with a N-Chan AI read vi, out its values in a queue which is read by the other parallel loops.  During the operation of the program, when the other loops treat their queues and (from what I can tell) occupy time processor, read it loop returns a 200279 error, saying:

  Error-200279 to AI Read.vi:7

  Possible reasons:

  Attempted to read samples that are no longer available. The requested sample was already available, but has since been replaced.

  Increase in the size of buffer, most frequently the reading of data or by specifying a fixed number of samples to read instead of reading all available samples would correct the problem.

  Property: RelativeTo
  Corresponding value: current playback Position
  Property: Offset
  Corresponding value: 0

  Task name: _unnamedTask<13>

  I am quite puzzled as to why this error keeps popping up.  No one knows what the first cause of this error is usually?

  Hi Jeanius, in my view, that this articlecan explain your problem.

• Error-200279 during analog playback Wfm Nsample

  I called the VI attached at least 10 x in the main VI and works very well, but sometimes it gives me an error-200279. Can someone please tell me why?

  Thank you in advance.

  Your buffer is not large enough.

  You collect the 20,000 samples per second, but only set it to 2000 samples per channel.  This is 1/10 seconds worth of data.  You read 1000 samples at a time, until about 1/20th of a second.  If the loop runs fairly quickly, you can follow and will not get an error.

  If there is a small delay (maybe Windows turns off and does something else for 50 or 100 msec.) your buffer will overflow.

  I would say eliminating the constant 2000 where you set the samples/channel and try again.  See if it behaves better.