Error 0X0000000D when you add the network printer at home

Similar Questions

• When you add the network printer

  When you add the printer network TCP/IP port option is not in the drop-down list

  The TCP/IP port selection will not be on "Add a network printer" it will be on "add a local printer.  You want to feed the printer directly.  In the printers and Faxes folder, click on 'Add printer' > next.  Select "local printer attached to this computer.  Do not check "automatically detect and install my Plug and Play printer."  Click Next.  Select "Create a new port" and choose "Standatd TCP/IP Port" in the menu drop-down.  Click Next, click Next again (in the "Add Standard TCP/IP Printer Port" Wizard), enter the printer's TCP/IP address, click Next, and then finish.  You return to the add a Printer Wizard.  Select the driver, and then complete the wizard. Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• Error message when you add the account to TimeMachine

  Hello

  I get the error in system.log when I enter my account information to access a drive for time machine below

  System.log:Feb 14 11:31:04 iMac - 5 K sandboxd [133] ([25623]): kcproxy (25623) political system: deny /Library/Keychains/System.keychain file-writing-untie

  The above error appears when you use access Keychani to run the add-in, when I use the route of the control panel to add I get a slightly different error

  System.log:Feb 14 11:19:12 sandboxd iMac - 5 K [133] ([465]): writeconfig (465) political system: deny /Library/Keychains/System.keychain file-writing-untie

  So it seems to be a sandbox configuration problem?

  Keith

  What functional problem you have, if any? Log messages are not a problem in itself.

• Error 80200011 when you install the Kodak printer software.

  Original title: error 80200011

  I try to install my Kodak printer software and I get this error 80200011 at the end of the installation process. Can someone tell me what this means and how to fix it?

  Hi Treb20,

  ·         What is the model number of the printer?

  ·         You install the software from a CD or have you downloaded?

  You can refer to the following articles of Kodak and see if they help.

  What should I do if I can't install the software for my all-in-one printer?

  Problems installing software with all-in-one printer

• Satellite A500-1GL: it is advisable to remove the battery when you use the network

  I know this is a silly question but its actually something I know not so thought I would ask.

  I almost always plug my laptop into the supply line (satellite a500 1gl)
  I was wondering have you actually keep the battery installed even when using the electrical network.
  Or is it really advisable to remove the battery when you use the network?
  I didn't know if the battery should always be in place.
  Thanks for your help
  Torti

  Hello

  A few years ago it was recommended to remove the battery of the laptop if the AC adapter is plugged. What keeps the constant charge battery
  New age of batteries are better you can leave the battery in the Bay it s ok and it should not affect the performance

  However, sooner or later each battery would die it s only a matter of time, you know

• R12.2.5 Installation on OL 7.1 ERROR: RW-50010: error:-script returned an error: 1 RW-50004: error code when you run the external process.  Check the log file for more details

  I tried to install EBS 12.2.5 on OL 7.1 with rapidwiz and got this error when applying the unique patches in second File System

  "Second system logfile file - /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log.

  LOG FILE:

  _____________________________________________________________________________________________________________________________

  Step 0-8

  Command: /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh

  Step 4 of 8: UNIX making pretreatment

  Running: chmod 777/db/oracle/OraInventory r

  chmod-r 777/db/oracle/OraInventory succeeded

  Step 4 of 8

  Performance: known appltest - c "/ app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh".

  PHASE of INSTALLATION has BEGUN: APPS TECH STACK: Wed Dec 2 17:27:07 IST 2015

  runProcess_1

  StatusString installation of Applications Technology Stack

  Copy the temp area models

  Inventory name is: app_oracle_TEST_fs2_Oracle_EBS_app

  One-time fixes copy to temp area

  Remove JDK_TOP: / app/oracle/TEST/fs2/EBSapps/comn/util/jdk32 if there is

  / App/oracle/TEST/fs2/EBSapps/comn/util/jdk32 deleted directory

  Installation of WebLogic Server.

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml oracle.apps.fnd.txk.config.InstallService

  WebLogic Server successfully installed

  Web Tier utility installation.

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml oracle.apps.fnd.txk.config.InstallService

  Level successfully installed Web utilities

  Registration EBSUsing /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml oracle.apps.fnd.txk.config.InstallService

  EBS registered successfully

  Rename/home/appltest/bea/beahomelist in /home/appltest/bea/beahomelist.29266 to avoid problems during WLS

  patching

  / Home/appltest/Bea/beahomelist renamed successfully.

  Application of ad hoc patches

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml oracle.apps.fnd.txk.config.InstallService

  Fatal error: T2K install Service

  oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: Output = 1 see log for more details. CMD = perl /app/oracle/TEST/fs2/FMW_Home/webtier/OPatch/opatch.pl apply - verbose - silent - ocmrf /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp jdk - / app/oracle/TEST/fs2/FMW_Home/webtier/jdk/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/patches/7695070/7695070

  at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:312)

  at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)

  at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)

  at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)

  at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)

  at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)

  at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)

  at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)

  at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)

  Can not install the unique patches

  RW-50010: error:-script returned an error: 1

  RW-50004: Error Code when you run the external process.  Check the log file for more details.

  
  

  It was recorded in /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log and I don't know how to find another newspaper for such details as mentioned in this journal. Please help me with that.

  
  

  Concerning

  KasunA
  

  Found a workaround.  The problem is that, before the 7695070 patch is applied, the installation program backup directory/apps/fs2/FMW_Home/webtier/jdk in /apps/fs2/FMW_Home/webtier/jdk_backup_existing_version, but then it clears. / jdk - the patch fails because it can't find it.  I had to rename the directory of the jdk for jdk2, and as soon as it gets deleted quickly and rename jdk2 jdk.  Then he applies the patches without problem.  A symbolic link would do the same thing.

• Error in get LV class by default when you open the default printer

  I am using vi text report easy to print text to the default system on a touchscreen Windows XP Embedded PC printer.

  When I run the simple VI I wrote (attached) I get a file not found error 7 in the LV ranks default vi when new report vi is called.

  The path in the default on the LV class value get's strange appearance; Here it is:

  c:\Torqo\USB Example.exe\1abvi3w\vi.lib\Utility\NIReport.llb\Standard Report\NI_Standard Report.lvclass printer

  The first elements of the way little look OK - player C and file Torqo that I'm short and the name of the application. Then it seems really weird.

  I use remote debugging on the touchscreen integrated for XP but it has the same error if I just run the .exe on the touch screen

  I can open Internet Explorer on the touch screen and print from it to the default system printer (it's an Epson printer).

  It smells kind of some package DLL or runtime package is not loaded on the touchscreen - but what it could be?

  I loaded the LV 2010 Runtime Engine LVRTE2010std.exe and the VISA DURATION visa503runtime.exe

  My vi normally works on the development of Windows XP SP3 without error System.

  In turn is a simple way to imitate printf or print serial port inside Labview, only to a USB port?

  I just need simple ASCII text that is sent to the connected USB printer.

  Any ideas for me?

  What's with the weird class path?

  I am a fairly new LV programmer but a Windows .NET programmer for a long time.

  Thanks in advance.

  I have no experience with the help of LV with XPe, so I can't help you there, but I can talk about the way - the EXE is essentially a folder structure that has been compressed into a single file. Inside this structure, LV place shipping screw in a folder called 1abvi3w so that they can be referenced by using a logical path (1337 is to avoid potential collisions).

  The only thing that I can suggest the hand is that you go into the build specification and explicitly include the report class when the generation by adding it to the section to always include. Theoretically, this happens automatically when you use the class, but maybe something is malfunctioning? Perhaps XPe does not pathnames within files exe or dynamics of decompression of the EXE file?

  If this does not work, you can also change the specifications of construction to place the report class at a specific location outside the EXE or go to the Advanced page and set the build to use the 8.x - style paths, which could help you, because I believe that it should generally put classes to report outside of the EXE.

• "Limited connection" when you configure the network between two computers XP.

  Original title: Configuration of the network connection

  Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

  Thanx Terry

  Old but good, networking tips from MVP Malke, MS:

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• To access the properties of an Error Message When you use the DisplayRunTimeErrorDialogEx method

  I have a reminder that displays the standard runtime error dialog box using the method Engine.DisplayRunTimeErrorDialogEx of custom error. http://zone.ni.com/reference/en-XX/help/370052H-01/tsapiref/reftopics/engine_displayruntimeerrordial....  The parameters of this do not allow me to specify information about the error message available (via the properties of the stage of the appeal of error).  However, when built-in bed in treated TestStand display dialog runtime error through its methods of error handling he managed to fill in the details about the error.

  Anyone know how I can fill in the details and the error code from the dialog box fields when you use the DisplayRunTimeErrorDialogEx method to call it? See attached screenshot by one example of what I get when I use this method.

  Kind regards

  David

  Doug is correct; each sequence in the call stack has its own sequence context, so if you just "ThisContext" for the sequence context parameter, you provide the framework for the error callback, which has no error.  To access the context of the sequence that wrong, you use the caller property to get to the next level in the call stack, for example:

  RunState.Engine.DisplayRunTimeErrorDialogEx ("error Dialog", ThisContext.Caller, 0, False, False, False, False)

  I hope this clarifies!

• I get this new error message when you change the properties of generation for an installer in LV2011sp1. - anyone know what it is?

  I built this front Installer. But I think that this is the first time since the upgrade to SP1. Now when I look at just the proerties for Installer build (I have yet to change), I get this error message when I hit the OK button.

  If I select No., it just stops. If I select YES, it seems to go ok. But I have not tried to build a new installer again.

  Anyone know what it is?

  Photo of the message is attached.

  I find it always useful to publish at least part of the error in your post, while others in the future may seek and find the answer.

  I think that you will be able to correct the error by clicking on the option of additional installers on the left pane, and then click OK to save the build.

  You probably asked to point the installer on some files that were missing since the upgrade.  I think that this occurs when the version of something on your computer changes, but the installer doesn't seem to know other installers until you visit the dialog box.  It would be brutal trying to replicate, but I met the same problem before.

• Cannot create document empty when you open the label printer software

  I installed the software to store 8 labels intermec for my label INTERMEC PF8t printer, when I try to open the message cannot create an empty document when you open the printer software labels appear. Help, please

  Hi Phaphama,

  ·         Did you do changes on the computer before the show?

  ·         He has already worked on the computer?

  Follow these methods.

  Method 1: Uninstall and reinstall the software and check if it works very well.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  If the problem still persists, contact the manufacturer for more help and information.

  http://community.Intermec.com/Intr/

  http://www.Intermec.com/support/index.aspx

  http://www.Intermec.com/products/pswlblshop/index.aspx

• Video AutoPlay when you add the interactive button

  I'm having a problem with a video slide auto play when it is added an interactive button.

  The first slide of the project, I have an interactive index climbing to different slides. When he jumps to another slide video slide goes automatically into play, but when you add an interactive button to return to the home page video auto is more parts.

  I added the SS to display the index and video slide.

  Just a guess here, but generally a button has a built-in break. You should maybe check and adjust exactly where the break is underway.

  See you soon... Rick

• "File not found" error message when you save the document

  Hello

  Oddly enough, whenever I click on 'save' in CS6, it opens a window "save under", (which shouldn't happen), then I click on save witht the existing file name (he said then the doc exist already), I click on OK, (and then on OK to the next popup window) do get the message "file not found".  I have to click on 'ok' and the document is not saved.  I tried to register differently in previous versions, and it still does not work.  I recorded a video of this behavior. You can see here - http://screencast.com/t/W1GYK0zsrk

  Why would he try to find a file?  Looks like an error message when you try to open a doc, does not save a doc.

  Help, please!  I can't stop my station until I get the document to save.

  Yes, Mohit1233 - happened with each file yesterday. Finally, I closed the doc (make me lose my job requires), then restarted my computer and now, that problem has disappeared. I work on a PC (HP);

  Barblove - I tried to do that yesterday (copy and paste into a new doc) and still nothing. I also tried to copy the work in a CS3 doc (but got an error message).

• Error message when you use the menu buttons in IE but not chrome

  Hello.

  My recently transferred website has a problem when you use the menu anywhere on the site in Internet Explorer, but not on my mac using chrome? I get this error message came up on top of the screen which takes three clicks to go MuseJSAssert: error calling the function switch: TypeError: object does not support property or method . So, if I click on anything else it pop ups again. Any ideas how to get rid of this? I tried to re - download files from muse, but the same phenomenon occurs. I tried to download the files in a folder of exported frm different muse I saw had worked for someone else on here, but no difference? Any help much appreciated.

  Website: vanletteringco.com

  You might get an error that iPage are sorting when opening too, just remove the /root1 in the address bar to see the site?

  Thank you

  GAV

  Gavin,

  Using Jotforms should ideally create not the questions here. Did you try reseating Jotforms code? I suggest you to get a charge of Jotforms code and then try to insert it to test.

  Kind regards

  Sachin

• Error message when you install the first elements 10 on my PC

  I bought the Pack Adobe Photoshop Elements 10 and Adobe Premiere Elements 10... and when trying to install, have successfully installed Adobe Photoshop Elements 10, but get an error message when you try to install the first Elements 10.  The Error Message reads as follows:

  This installation package is not supported by this processor type.  Contact your product vendor.

  Now that?  I don't know what to do from here.

  Could you please someone get back to me?  Thank you

  Hello

  Disc 1 contains the installer for 32-bit Windows.

  Disc 2 contains the installer for Windows 7 64-bit.

  Disc 3 contains the installer for mac OS.

  Disc 4 is the content of the disc for Windows Adobe Premiere Elements.

  Disc 5 is the content of the disc Adobe Premiere Elements for Mac OS.

  You can install from Disc1, 2 or 3 depending on the operating system running on your computer.

  Thank you