Trouble code purple hp

Similar Questions

• code purple

  I've restored my pc hp pavilion a6402f factory and received the configuration error "code purple".

  Call 800-HP invent or 1-800-474-6836

• Configuration of code purple error

  What is error configuration, purple code, trying to run Recovery Windows XP Media Center ' 05?

  Thank you!

  Hello

  I think that you will make contact with HP about this. This is the first time I've ever seen an error code Purple and research seems to be oriented to the motherboard itself. This looks like a common mistake when the motherboard only has not been "tattooed" correctly. It's the process of individualisation of a motherboard with a separate serial number or another for code.

  I would like to talk to HP everything to do with this error code.

  I hope this helps!

• How can I fix code purple error on HP?

  I have currently a HP p6277c-b desktop PC running Windows 7 home prmium 64-bit.

  I had a Doctor in my video section of the motherboard, I first checked HP for the motherboard, but they don't sell any more.  I went online and found the same exact motherboard (ipiel-la3-eureka-gl8 p/n 533234-002).

  I installed the motherboard which was perfect, booted up machine and it only would not start before start Ifigured drive somehow got corrupted, so I did a system restore and everything was good, the start screen came punt by that and went to the configuration system, it is when I get an ERROR CODE PURPLE!

  Doing some research on the Internet I found the error Code Purple is a boobie trap that HP creates, there is a tattoo on the motherboard that seeks recovery. Thank you HP.  So I'm stuck since my HP is out of warranty, they won't even far cosider talking to me.

  How can I get the motherboard HP tattoo?

  Sincerely,

  A customer in. ' ed

  John

  The source of the new motherboard has no importance.

  HP said they will help with a "Code Purple". I offer the remedy only if necessary.

• Code Purple on Pavilion a1312n after recovery

  I have a pavilion with 512 GB ram 250 GB hd original a1312n, the USB ports were beaten so I got a replacement with the same model HP motherboard # as the original. I backed up the HD on my Dell & put the HD. I ran the non-destuctive recovery. Once completed he said to reboot. After the reboot, it says I have configuration error Code Purple.

  All support said I need to contact Cust support & pay. Is there anyone on this chat with the knowledge I need to fix without this solution. If we have to pay for support, we will screw up the compuer

  I am well informed of computers to work on them since 1989 and am not scared to do what I need, but I am not educated to shipped.

  Thank you in advance for any help you can offer

  Dwight HoganCamp
  Troy NH

  I'm acatually he has recovered from the HP disk hard disk partitiion. After you delete the audit on the sata drive file, it is recharged with no update problems including MS & HP. The hassle only that I feel with her, it's the audio feature of the motherboard does not work. I went back to the seller and got it.

• I add new processor, Ram and OS. My question is! I'm meeting for HP (CODE PURPLE)

  OK, don't get me wrong, I love horses and my hp computer but am hating realing (code purple) in the past, whenever I would add more Ram I had to send in my PC for a month so they could fix (code purple) I added the new Ram a new processor and a new OS. My question is! I'll meet to agen (CODE PURPLE) of HP?

  Purple code applies only to the original HP installed OS.

• Please help trouble Code 43 error graphics card for XPS 8700 (as well as the disappearance of sleep/Standby Mode) (Windows 10)

  I got my XPS in 2014 and my warranty of service completed in 2015 Jan before I installed Windows 10. So since I've upgraded to Windows 10 I started having problems with by XPS 8700. Now, I have no guarantee. I thought he would go better once they have released an update of the BIOS and it did for a while unfortunately in recent months, I noticed two major issues.

  (1) upon the starting and restarting my computer, my monitor does not end up receiving the signal from the computer and remains dark.

  -Checking that it is not a problem with the monitor by testing with other computers

  -J' checked in the Device Manager and there was a next yellow alert for graphic cards / NVIDIA GeForce GT 635

  -By clicking on, he showed me this: Windows has stopped this device because it has reported problems. (Code 43)

  Unfortunately, it is not the only problem with the graphics card.

  (2) "sleep" my mode is gone (it is related to graphics and BIOS).

  -J' tried the go in power to add setting but it was not yet listed.

  -I went to the command prompt and looked powercfg.exe that's what I discovered:

  C:\Windows\System32>Powercfg - a

  The following sleep States are available on this system:

  Hibernate

  Quick start

  The following sleep States are not available on this system:

  Standby (S1)

  The system firmware does not support this standby state.

  An internal system component has disabled this standby state.

  Graphics

  Standby (S2)

  The system firmware does not support this standby state.

  An internal system component has disabled this standby state.

  Graphics

  Standby (S3) mode

  An internal system component has disabled this standby state.

  Graphics

  Eve (S0 low idle power)

  The system firmware does not support this standby state.

  Hybrid sleep

  Standby (S3) mode is not available.

  Now I really wish I could start or restart my pc without staring at a blank screen and the problem of code 43 with Nvidia GeForce GT 635. Also, I would if I could have the option to upgrade my PC to sleep. I really miss it and do not have to constantly reboot my computer to be able to see anything on the monitor.
  

  I hope someone can help me with these questions without having to reset the pc and reinstall, all over again, that the problem still exists in other cases (I don't have a copy of the installation of programs pre-installed dells so...). This computer is only 2 years old, it didn't need to be retired.

  NVIDIA GeForce GT 635 (PCI\VEN_10DE & DEV_1280) the card is physically wrong and needs to be replaced.

• Windows XP Home Edition does not start: System Configuration Error Code purple?

  I ran recently on my Windows XP Home Edition SP3 computer system recovery and once the recovery is finished I rebooted the system and then this message and I'm stuck here.

  I don't have any disc that came with the computer because it was very long ago already. I tried to download the 'Home Edition Set Up disk for Floppy Boot Installation of Windows XP"Microsoft, but I can't launch the ff:

  Windows XP Home Edition
  Windows XP Home Edition SP1
  Windows XP Home Edition SP2

  I can't create the configuration of disk for home edition, SP1, and SP2 because this computer I use currently is a 64 bit and no floppy drive. That's why I downloaded this instead:

  Windows XP Service Pack 3 - file to Image CD ISO-9660

  From:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en

  I burned a DVD ROM, but I don't know what to do next. After burning, I reinserted the disc to your computer from the active autorun. Then I inserted the disc for my Windows XP that has "System Configuration Error" and I tried to restart it but theres just no autoplay or anything that the computer always crosses the "System Configuration Error" message and I don't know how to access the set up disc. What should I do? Help please... :(

  Hello

  Try the methods listed in the section below and check.
  How to resolve configuration errors by using the System Configuration utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Purple-Help error code

  Does anyone know how to fix Code Purple error?

  I promised to give my Compaq Presario SR 1103WM computer to my nephews. My computer worked fine. But I don't have the system recovery discs I did a F10 (the full system restore) this morning. Now, I get a "System Configuration Error" message and the Code purple error.

  I called Technical Support for HP/Compaq and the representative at the start of the questions whether or not I had added or changed any hardware. Two years ago, the modem passed away during a storm. I got a guarantee of Wal-mart and they sent someone on who replaces the modem.

  Representatives of HP/Compawq put me on hold for a long time with the impression that it is what is the question. When she returns his 'coup' has the motherboard on my computer went bad.

  Now, because my system is more than 5 years old, she suggested that to buy a new computer. That's all just useless. I don't think my motherboard "spontaneously" as the recovery of the system went wrong. I'm really embarrassed because I do not believe that an easy one, I got an honest answer.

  Can someone tell me how to fix Code Purple error? Is there a cancellation in the manner the incomplete system restore?

  Code Purple is an exclusive problem of HP, the simplest solution is to avoid. However, it is already too late for you as for me. Basically, it's an attempt to force you to pay to repair or upgrade your PC, or if you have not learned the first time, buy a new one. Here's the most concise answer I found, tried to translate it into plain English.

  ENGLISH SIMPLE EASY AND FAST, DIFFICULT FOR ALL SYSTEMS *.
  Windows 7 code purple or purple code Windows Vista

  With error code purple on the screen, press SHIFT + f10 (the shift key and press F10 (at the top of the keyboard) at the same time) to open a small screen called command prompt. (So you get a small black screen with white text that says something about your first Windows version and ways down a bit, you will see "C:\ > '.)   It is all ready before you start typing.)
  Type the following line, just as you see here...

  Notepad C:\hp\bin\checkdmi\checkdmi.cmd

  so it will look like this

  C:\>Notepad C:\hp\bin\checkdmi\checkdmi.cmd

  Press ENTER.

  You will see the text of the file listed in a window using a simple text editor.
  Go to the beginning of the text. Press ENTER to set a space. This type...

  Goto cleanup

  Therefore, everything that comes after that, the first line looks like this...

  Goto cleanup

  Save the Notepad file and exit and restart your PC. You're good to go.

• Purple links in Dreamweaver

  Hello

  Im having trouble with purple links in Dreamweaver. It seems to color what I ever change the link visited to makes no difference, it remains just purple.

  Is there something wrong with my code?

  a: {linkbig}

  do-size: 22px;

  do-family: 'Relative book', "Century Gothic", Verdana, without serif. do-size-adjust: 0.5; Police-weight: normal; make-style: normal;

  }

  a: link {color: #000 ;}}

  a: visited {color: #000 ;}}

  a: hover {text-decoration: stressed; color: #000 ;}}

  a: active {color: #000;}

  }

  Thank you

  It's okay

  Corrections marked in red

  a {linkbig

  do-size: 22px;

  do-family: 'Relative book', "Century Gothic", Verdana, without serif. do-size-adjust: 0.5; Police-weight: normal; make-style: normal;

  }

  a: link {}

  Color: #000;

  }

  a: visited {}

  Color: #000;

  }

  a: hover {}

  text-decoration: underline;

  Color: #000;

  }

  a: active {}

  Color: #000;

  }

• Unknown USB device (device application descriptor failed) Code 43

  my internal cam has stopped working, I worked on almost everything what I found in the internet

  disabled drivers and restarted

  uninstalled the usb ports on the Device Manager and rebooted again

  I get this error message in the Manager of devic

  name:

  Unknown USB device (device application descriptor has failed)

  Device status

  Windows has stopped this device because it has reported problems. (Code 43)

  A request for the USB device descriptor has failed.

  Geographical area:

  Port_ #0001.Hub_ #0004

  Status:

  Device USB\VID_0000 & PID_0002\6 & e2f2cee & 0 & 1 had a problem starting.

  Driver name: usb.inf
  The class GUID: {36fc9e60-c465-11cf-8056-444553540000}
  Service:
  Lower filters:
  Upper filters:
  Problem: 0x2B
  Status: 0x0

  Hi waly,.

  Thank you for the information. I suggest that you unplug all USB connections and refresh your laptop. Then try to use your webcam. I think that the problem with the USB connection that gives you the error and not your webcam. Here is a document on how to update your PC to solve problems (Windows 8).

  If you are still experiencing a problem with the webcam and then one of the documents in the previous post should help now. Any stage of document Windows 8 will be the same for Windows 8.1.

  I'm also including this document how trouble Code 43 errors that will help determine which USB product causes the error to appear.

  I hope that this information help, please let me know how it goes.

  Good luck and have a great day!

• Failure to update 8007317C need a fix code

  Update fails error 8007317C need trouble code

  Hello

  1. is this problem limited to updates specific or all the updates? Thanks for mentioning the number of KB.

  2 were there any hardware or software changes made on the computer before this problem?

  3. what exactly do mean you receive this error code?

  See methods below and check if that helps.

  Click on the link and run the fixit tool.

  Method 1: Reset windows update components.

  http://support.Microsoft.com/kb/971058

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  Method 2
  Run the fix of the article.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 3
  Try to install the update in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 4
  Manually, try to install updates from Microsoft Download Center.

  a. go to the Web - http://www.microsoft.com/en-us/download/default.aspx from Microsoft Download site

  (b) enter the number of "KB" of the update in the download search box and then click OK.

  c. in the list of search results, click on the link of the article of the (KB) Knowledge Base to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  d. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  e. When you are prompted, click open to install the update.

  If the problem persists, see following method.

  Method 5
  You can also try the steps from the link:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Chkdsk WARNING: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Let us know the status of the issue.

• Cannto run System Restore: 0x8000ffff error code

  Original title: error 0x8000ffff trouble code

  System Restore tried and couldn't make any changes due to the error 0x8000ffff, t please help-Bill

  Which antivirus product is installed? You will have problems if it is Norton!

• Example: Pavilion p6-2350 pc: How do I change bytes to feature on a Pavilion p56-2350 pc with Windows 8

  I replaced the motherboard, but is unable to change the featurebyte in the BIOS for windows 8 will be activated.

  This must be done when a motherboard is installed in the device, and not to do so can lead to errors during the HP recovery discs use and give a "Code Purple" in windows, causing the operating system to be blocked down and unable to serve. How work the HP recovery discs is they compare the featurebyte and build entry ID information on the motherboard and compares them to a list of models that the specific recovery disk is available for. If it does not match any of the models it will give an error that the disks are not compatible with the computer and will not go further, this error will occur before the coming Recovery Manager. If records are poorly done, or the model selected incorrectly on them through the comparison of ID featurebyte/Build then it incorrectly partition the drive and give a fatal error with a 0 x error code, this happens because the partition for the operating system is so small that the image that HP uses or they are installing additional software are unable to fit on the partition that is made. Once again, the recovery are at fault in this case, or the tattoo is the question itself.
  
  For offices of consumption, this process breaks down into two procedures. If the BIOS is a v5, then you are out of luck because you will need a CPC_DMI drive, which is available only to technicians certified HP. If it is a V6, then you have a thin ray of hope. Press CTRL + F10 to enter the BIOS instead of just normal F10. If you go in the Section ID system, or if you have the latest BIOS (which has File, storage, starting at the top), then you will need to press CTRL + A to enter this section. In this section, the system IDs or CTRL + A, you will have a bunch of entries, where different values can be entered. If you don't select anything, then you are not in the Advanced BIOS and must try to enter it again. If you can highlight things but not press on enter and edit them, then you're out of luck that you need a BIOS_UPDATE utility for reeset DMI information, it is also disclaimed except to HP certified technicians.
  
  If, by chance, you are able to highlight and change the values that you are very lucky because you don't need the disc. Simply fill out the information on this screen with two small notes which must be known. The model he is claiming is actually the number of unit. The Reference is in fact the model number. The featurebyte is case-sensitive, do not use spaces, and certainly include the. XX at the end. The build ID should not include the "*" but should include the #DABA #SABA. If you get an error that the featurebyte was not accepted, something is not entered correctly, try again (this is always the case, it is always bad when this error.)
  
  If you use a laptop, you are out of luck, as special files to a bootable USB key are needed, I am not very familiar with this process, but only HP Certified technicians are given files.
  
  If you use a commercial desktop or all-in-one, then you can just enter the IDs system and edit them in the BIOS, it's super easy and you shouldn't need to disks.
  
  Hope this clears somethings

  Checkurtech

• installation of the service pack blocking xp

  I received 'configuration error - code purple' and required to perform a system recovery.
  Restarted with XP SP1... downloaded SP2, but after the installation system crashes and can recover only back up to SP1.
  I also need to go to Safe Mode to regain possession of the program file.
  Help!

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that another repair facility (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft