How can I fix error 1083 when you try to run BITS?

Similar Questions

• How can I fix error 1935 when you try to download Adobe Acrobat?

  I had Adobe Acrobat is installed on my computer for a long time and was getting periodic updates through version 9. ? as they became available.  When the new version 10. ?? (with an X in the name of the file) has been made available, it would not load into my computer.  Since then I tried to download Adobe and I get the error code 1935. I looked at possible ways to fix it, and the first is to go to the "command prompt" and type in a certain order.  When I tried to do that, it tells me that I need to be logged in as an administrator.  How can I connect as administrator (I am an administrator on this computer - this is my PC at home)?  If this does not resolve the problem, which should try after that?  Thank you very much for your help!

  Hello

  Right-click guest, and then click run as administrator.

• 5 error message when you try to run gimp - 2.18.16 - Setup could not create the directory

  5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
  Setup could not create the directory
  c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
  Error5: Access denied
  In the Temp folder under Security I have:
  'SYSTEM' with full control
  "Administrators" with full control
  "Username" with full control
  All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
  The two latest downloads gave the same error message.

  Thank you for your time.
  Debbie

  I suggest you do this:

  1. click on the start planet.
  2. type cmd.exe in the search box.
  3. press on Ctrl + Shift + Enter
  4. click on "run as Administrator".
  5. type the following commands exactly and press ENTER after each:
  takeown /f "%Temp%" / r

  Cacls "%Temp%" / t/c/g "%nom user %": F System: F

  (Enter Y when you are prompted "Are you sure?")

• 8024A 000 error code when you try to run Windows Update on Vista 32-bit

  I get the above error when you try to run Windows Update on Vista 32 bit.

  I use an Asus laptop and have used the Asus recovery cd.
  I just replaced the old HD (500 gb) as it failed with a 750 GB HD.
  I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".
  Any help would be greatly appreciated.
  Thank you
  Sam

  Thanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.

  See you soon
  Sam

• I downloaded creative cloud, Dreamweaver and Muse.  I get the following error message when you try to run Dreamweaver: '... Unable to start properly.  0xc000007b'. Muse started ok.

  I downloaded creative testing Cloud, Dreamweaver and Muse.  I get the following error message when you try to start the Dreamweaver application '... Unable to start properly.  0xc000007b'. Muse starts without a problem.  Is there something wrong with the download trial of Dreamweaver or is it my computer?  I downloaded the Windows 7 premium, Intel, processor Pentium B940 2.0 ghz, 4 GB ram, 64-bit operating system.

  ... 07 b problems http://forums.adobe.com/thread/1355374?tstart=0

• How can I fix error 0xc000007b when lauching TEES 5 Skyrim?

  Original title: 0xc000007b on Skyrim

  How can I fix the 0xc000007b error when I want to run YOUR Skyrim 5?

  Hi Perl,

  (1) what is the right name of the game with which you are confronted with the question?

  (2) what is you get the exact error message?

  (3) what version of Microsoft Visual C++ is installed on the computer?

  The error code that you get is usually due to corruption .NET framework or Microsoft Visual C++. Follow the steps below to solve the problem.

  Method 1: Uninstall and reinstall Visual C++ Library Runtime components to solve the problem.

  Click on the link given below depending on the version of the operating system you have.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=5555

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14632

  Method 2: Install the game in compatibility mode.

  I recommend you to check the compatibility of the game with Windows 8. You can use the link below.

   

  See what works

  http://www.Microsoft.com/en-GB/Windows/compatibility/CompatCenter/home

  If the game seems to be not compatible then you can try to install in compatibility mode but you must choose the option run as administrator , and then follow the steps below.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Hope that solves your problem. Please get back to us with the State of the question.

• Error ESSLANG when you try to run ESSCMD after migration

  Hello
  
  Migration from 7.x to 11.1.3 and when I try and run ESSCMD I get the below error. It's been a while since I did this so don't know what to do.
  
  Thank you...
  
  Essbase command Interface in 64-bit Mode - version 11.1.1 (ESB11.1.1.3.0B126)
  Copyright (c) 1991, 2009, Oracle and/or its affiliates. All rights reserved.
  
  US 5 359 724 patent number
  Number 6 317 750 US patent
  
  
  
  ESSLANG environment variable not defined
  
  Could not get locale. Please define good environment ESSLANG.

  Installs the version 11 do not make path and environmental settings of variables available to all user IDs. I think 9 system and has done before.

  I think that the id that installs Essbase becomes the path, arborpath, essbasepath, eas_path, etc environment variables. Has no proof of identity. (The people who actually have a clue regarding the facilities will correct me if I have this wrong.) It's a pain.

  I had to put these values manually so that all ID on the server get variables.

  Navigate to the startmaxl, the startesscmd, the .cmd files was icing my cookies.

  Kind regards

  Cameron Lackpour

• How can I fix slow shift when you type?

  It's weird. In recent days, when you type anything on Facebook or other applications, including the subject of this question, I feel a very important gap between what I get and when it appears on the screen. However, as I type this question, there is no lag whatsoever.

  Anyone know what is happening and how to fix?

  I have run virus scans on Webroot and no problems were found.

  Thanks for any help you may have.

  The first step and perhaps the only necessary one, is to get rid of your software "anti-virus" without value.

  Please remove the "Webroot" product by following the instructions on this page. If you have a different version of the product, the steps may be different.

  Back up all data before making any changes. Never install a software "anti-virus" or "anti-malware" again.

• 0xc015004 error code when you try to run ACDSee

  Whenever I try to install ACDSee application it installs apparently successfully, but when I try to open it I get the Message error "the application could not initialize properly (0xc015004)...". "and it closes its doors. I contacted the technical support of ACDSee and they tell me it's an operating system error code.  I tried to uninstall ACDSee, including to remove and reinstall, registry keys, but the same error code is displayed.
  Anyone have an idea what is wrong?
  Jack

  Ken

  I abandoned the Inplace upgrade and tried once more with the same result.  He "stuck" in the same place I did a complete reinstallation of the operating system.  Everything works fine now, and I was able to install ACDSee without any problem.

  Thanks to everyone who tried to help me.  In the end, you me headed in the right direction.

  Concerning

  Dealbarta

• Error 0xc0000906 when you try to run .exe files.

  Original title: 0xc0000906

  I was installing a software on my laptop running windows 8, and all of a sudden the battery has failed.

  Since then, I ' ve been unable to carry out most of the .exe files.
  I end up getting an error saying request "the application could not start properly (0xc0000906). Click OK to close the application. ' or 'Windows cannot access the specified device, path or file. May not permissions to access you the item"pretty much whenever I try to run an application.
  Can't install anything on my PC...
  Please help me as soon as possible.
  Malice.

  He solved.

  My AV started sandbox everything and so the problems.
  I suspect that there is a corruption while I was updating of the VA.
  Disabled it and everything is back to normal.

• How can I fix error 6 when installing Photoshop?

  Hello Adobe community today when I tried to install the version of Adobe Photoshop I found error 6. I was wondering if you guys could help me with this error.

  Here is the error code I've found:

  Exit code: 6

  Please see specific errors below for troubleshooting. For example, ERROR: DW003, DW071...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 3 (s)

  -Payload: Package redistributable Microsoft Visual C++ 2012 (x 86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC}.

  ERROR: DW071:

  ERROR: DW003: third payload Installer vcredist_x86.exe failed with exit code:-2147024546

  ERROR: Cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 86). Please try to install by double-clicking the executable file to ' C:\Users\Kellan\AppData\Local\Temp\{F84D1E4D-F269-48E7-B308-95FFE03CD934}\Photoshop_16_L CC S20_win64\Adobe 2015\payloads\Microsoft VC 2012 Redist (x 86) \vcredist_x86.exe ", or download and install the 2012 Microsoft Visual C++ Redistributable Package last (x 86) from the Microsoft Web site - www.microsoft.com

  -------------------------------------------------------------------------------------

  PS: I'm new to the adobe Forum so I'm sorry if I posted this in the wrong section.

  Hey kellan,.

  Please visit the link below: -.

  https://helpx.Adobe.com/Creative-Suite/KB/errors-exit-code-6-exit.html

• Error 0x8004231F when you try to run back to the top

  I tried some things proposed for this error msg, but my HP Recovery is still red - only 8,01 MB of 5.09 GB free space.  The msg comes not long after the backup starts.  There is nothing in the trash and I uninstalled nearly all unused files.

  Hi Diana,

  There are two connected problems here and I tried to solve the easier one first.  My first problem is your point No. 1 - not enough space on the backup location (HP recovery).  I get a popup telling me that I have a disk on HP-recovery space, even if I deleted all external files.  For this reason, I tried to make a backup on DVD, which is when my second problem - the error msg on there is not enough storage space shadow.
  I had checked the wires for the solutions to the problem of the second and did something else at the cmd prompt, which checked for problems.

  If I do as you suggest won't that make my too big storage?

  I'm not good at this computer stuff.  Why can't I just remove everything that is in the recovery of HP?  I don't know what happened to suddenly move the red bar.  HP-recovery is an automatic backup there are too many things I don't understand.

  For the moment, I can't afford to pay to get Microsoft to fix the problem.  It will go well if I wait and do nothing, for a month?  Or should I try what you suggested?
  What

• (Windows 2000) Error #0x80072EFE when you try to run Windows/Microsoft Update

  Hello world. I hope you don't mind offering support for a Windows 2000 based platform here, (I don't think Windows Update deferred much, if at all between the two operating systems)

  In any case, all of a sudden, I get error 0x80072EFE in Windows Update all of a sudden. I tried several troubleshooting steps, delete the folder C:\Windows\SoftwareDistribution to just reboot my computer. Nothing seems to work, and I hope someone has a step that will be.

  The last few lines (which seem to be relevant to the question at issue) are as follows:

  15:50:21:700 2 508 3e4 PT +++ PT: synchronization of updates of the server +++ 2011-01-22 15:50:21:700 508 3e4 PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, server URL = 15:50:21:888 https://www.update.microsoft.com/v6/ClientWebService/client.asmx 2011-01-22 508 3e4 Misc WARNING: send failed with hr = 80072efe. 2011-01-22 15:50:21:888 508 3e4 Misc WARNING: SendRequest failed with hr = 80072efe. Used proxy list: <(null)>list used workaround: <(null)>Auth schemes used: <> 2011-01-22 508 3e4 PT 15:50:21:888 + last proxy request failed with hr = 0x80072EFE, = 0 15:50:21:888 2011-01-22 508 HTTP status code 3e4 PT appellant provided credentials = 15:50:21:888 No. 2011-01-22 508 3e4 PT + Impersonate flags plus 0 3e4 508 15:50:21:888 2011-01-22 PT + Possible authorisation schemes used = 2011-01-22 15:50:21:888 508 3e4 PT WARNING : Methods failed, error is 0x80072EFE, SOAP client error = 5, error = 0 soap code of HTTP status code = 200 15:50:21:888 2011-01-22 508 3e4 PT WARNING: PTError: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: GetConfig_WithRecovery failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: RefreshConfig failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: RefreshPTState failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING : synchronization of updates: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: SyncServerUpdatesInternal failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 Agent * WARNING: could not synchronize, error = 0x80072EFE 2011-01-22 15:50:21:888 508 3e4 Agent * WARNING: exit code = 0x80072EFE

  If anyone can help, that would be great.

  See...

  Microsoft Update Catalog
  http://catalog.update.Microsoft.com/v7/site/home.aspx

• Receive the error message when you try to run the Installer "Install" is damaged and cannot be opened. You must eject the disk image.

  Help, please!

  I need a live chat

  Hello

  Please specify the application that you are installing.

  You can contact customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• Receive error message when you try to run the installer of Shockwave Player

  He can't get a correct installation.  It's my error message.  What should I do?  My system has all the necessary requirements.

  I found my problem.  I was not logged as an administrator.