Error 0x8004231F when you try to run back to the top

Similar Questions

• 5 error message when you try to run gimp - 2.18.16 - Setup could not create the directory

  5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
  Setup could not create the directory
  c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
  Error5: Access denied
  In the Temp folder under Security I have:
  'SYSTEM' with full control
  "Administrators" with full control
  "Username" with full control
  All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
  The two latest downloads gave the same error message.

  Thank you for your time.
  Debbie

  I suggest you do this:

  1. click on the start planet.
  2. type cmd.exe in the search box.
  3. press on Ctrl + Shift + Enter
  4. click on "run as Administrator".
  5. type the following commands exactly and press ENTER after each:
  takeown /f "%Temp%" / r

  Cacls "%Temp%" / t/c/g "%nom user %": F System: F

  (Enter Y when you are prompted "Are you sure?")

• 8024A 000 error code when you try to run Windows Update on Vista 32-bit

  I get the above error when you try to run Windows Update on Vista 32 bit.

  I use an Asus laptop and have used the Asus recovery cd.
  I just replaced the old HD (500 gb) as it failed with a 750 GB HD.
  I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".
  Any help would be greatly appreciated.
  Thank you
  Sam

  Thanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.

  See you soon
  Sam

• I downloaded creative cloud, Dreamweaver and Muse.  I get the following error message when you try to run Dreamweaver: '... Unable to start properly.  0xc000007b'. Muse started ok.

  I downloaded creative testing Cloud, Dreamweaver and Muse.  I get the following error message when you try to start the Dreamweaver application '... Unable to start properly.  0xc000007b'. Muse starts without a problem.  Is there something wrong with the download trial of Dreamweaver or is it my computer?  I downloaded the Windows 7 premium, Intel, processor Pentium B940 2.0 ghz, 4 GB ram, 64-bit operating system.

  ... 07 b problems http://forums.adobe.com/thread/1355374?tstart=0

• Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

  Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections

           Firefox is configured to use a proxy server that is refusing connections.
  

   Check the proxy settings to make sure that they are correct.
   Contact your network administrator to make sure the proxy server is
     working.
  

  Go to Options > advanced > network > connection > settings, then choose 'no proxy '.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.

  • http://Windows.Microsoft.com/en-us/Internet-Explorer/products/IE/home

• Error ESSLANG when you try to run ESSCMD after migration

  Hello
  
  Migration from 7.x to 11.1.3 and when I try and run ESSCMD I get the below error. It's been a while since I did this so don't know what to do.
  
  Thank you...
  
  Essbase command Interface in 64-bit Mode - version 11.1.1 (ESB11.1.1.3.0B126)
  Copyright (c) 1991, 2009, Oracle and/or its affiliates. All rights reserved.
  
  US 5 359 724 patent number
  Number 6 317 750 US patent
  
  
  
  ESSLANG environment variable not defined
  
  Could not get locale. Please define good environment ESSLANG.

  Installs the version 11 do not make path and environmental settings of variables available to all user IDs. I think 9 system and has done before.

  I think that the id that installs Essbase becomes the path, arborpath, essbasepath, eas_path, etc environment variables. Has no proof of identity. (The people who actually have a clue regarding the facilities will correct me if I have this wrong.) It's a pain.

  I had to put these values manually so that all ID on the server get variables.

  Navigate to the startmaxl, the startesscmd, the .cmd files was icing my cookies.

  Kind regards

  Cameron Lackpour

• Error: "CHKDSK cannot continue in read-only mode" when you try to run it on the E: drive.

  Original title: CHKDSK does not work on my Windows 7 laptop

  I'm trying to run a CHKDSK on my external Hard Drive E: but everytime I try to CHKDSK E: in the shell, all I get is

  "This type of file system is NTFS.
  Errors found. CHKDSK cannot continue in read-only mode. »
  (That's all I get, nothing in between)
  I tried to make the Tools section of error checking, but it does not work there either...
  If this is a problem with the operating system, I don't have a Windows 7 disc because my laptop came with it pre-installed
  So, what should I do?

  Hello Rayzorexe,

  Thanks for the response back.  You are able to start your computer and get the recovery options?  From there, you can run "Command Prompt" and I want to know if you are able to run Chkdsk from there successfully.

  Are you the same response from the commands below:

  Type 'chkdsk e:' in the command prompt. Press 'Enter' to run the utility to check the disk in read-only mode. He locates errors but does not fix the

  Enter 'chkdsk e:/f' in the command prompt. Press 'Enter' to run the disk check and correct errors without analyzing bad sectors.
  

  Type 'chkdsk e:/r' in the command prompt, press 'Enter' to do a thorough analysis of the sectors and files and repair any problems found.
  

  Recovery options:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

• Error 0xc0000906 when you try to run .exe files.

  Original title: 0xc0000906

  I was installing a software on my laptop running windows 8, and all of a sudden the battery has failed.

  Since then, I ' ve been unable to carry out most of the .exe files.
  I end up getting an error saying request "the application could not start properly (0xc0000906). Click OK to close the application. ' or 'Windows cannot access the specified device, path or file. May not permissions to access you the item"pretty much whenever I try to run an application.
  Can't install anything on my PC...
  Please help me as soon as possible.
  Malice.

  He solved.

  My AV started sandbox everything and so the problems.
  I suspect that there is a corruption while I was updating of the VA.
  Disabled it and everything is back to normal.

• DW028 of Error Message When you try to go back and download Muse 2014 (what I knew how to use)

  The latest version of reactive of Muse is a mountain too high to climb.

  I want to go back to what I know - MUSE 2014.

  But when I try to download the previous version, I'm hung upward and an error message:

  ERROR: DW028: InstallOperationsQueue: instruction set is empty

  ERROR: DW028: InstallOperationsQueue: instruction set is empty

  FATAL: DW028: could not open the queue of the operation

  It happens on both my Mac laptops.

  Thank you.

  Hi Jcmanheimer,

  Please remove Muse CC completely from your machine - use of the Adobe Creative Cloud cleaning tool to solve installation problems

  After that install it again thanks to the creative cloud desktop application.

  See, Installation and launch of the errors in the log. Adobe Creative Suite 6, Adobe Creative Suite 5.5, Adobe Creative Suite 5

  If the problem persists, please analyze the log files to find out the root cause of the problem: Troubleshooting Adobe Creative Cloud install problems with log files

  Please write back to us, if it can help.

• Firefox 5 works but after 6 installation I get this error when you try to run it: check the details below...

  Firefox 5 works fine, but as soon as I install 6 and try to run it, it gives me this error msg:

  "XML Parsing Error: undefined entity location: chrome://browser/content/browser.xul line number 233, column 5: key-^ =" "< =" "id ="key_scratchpad"keycode =" & amp; scratchpad.keycode; ' modifiers = "Shift" p = "" > < / key > ""

  He also said during installation that it can not find updates for Java and Skype extensions.

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  Remove extensions that do not have a button in the extension manager are installed by other programs and should be disabled or updated via this software.

  You can uninstall and remove extensions of the Java Console, you do not need to run Java applets.

  See:

  • http://KB.mozillazine.org/Java#Multiple_Java_Console_extensions

• 0xc015004 error code when you try to run ACDSee

  Whenever I try to install ACDSee application it installs apparently successfully, but when I try to open it I get the Message error "the application could not initialize properly (0xc015004)...". "and it closes its doors. I contacted the technical support of ACDSee and they tell me it's an operating system error code.  I tried to uninstall ACDSee, including to remove and reinstall, registry keys, but the same error code is displayed.
  Anyone have an idea what is wrong?
  Jack

  Ken

  I abandoned the Inplace upgrade and tried once more with the same result.  He "stuck" in the same place I did a complete reinstallation of the operating system.  Everything works fine now, and I was able to install ACDSee without any problem.

  Thanks to everyone who tried to help me.  In the end, you me headed in the right direction.

  Concerning

  Dealbarta

• Error 80072efe when you try to run Windows Update (computers)

  In the last week or so, Windows updates have begun failing on our computers to Vista. Sometimes it will work. If there are no updates, there is no difficulty to install. Error # is always the same. Here is a text of the passage of a WindowsUpdate.log:

  + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://update.microsoft.com/v6/ClientWebService/client.asmx
  WARNING: Send failed with hr = 80072efe.
  WARNING: SendRequest impossible with hr is 80072efe. Used proxy list: <(null)>list workaround used: <(null)>Auth schemes used:<>
  + Proxy last send request failed with hr = 0x80072EFE, = 0 HTTP status code
  + Appellant provided credentials = No
  + Indicators impersonate = 0
  + The possible authorisation schemes used =
  WARNING: SyncUpdates failure, error = 0x80072EFE, the soap client error = 5, error = 0, status = 200 HTTP code soap code
  WARNING: PTError: 0x80072efe
  WARNING: Failed to SyncUpdates_WithRecovery. : 0x80072efe
  WARNING: Synchronization of updates: 0x80072efe
  WARNING: Failed to SyncServerUpdatesInternal: 0x80072efe
  * WARNING: Could not synchronize, error 0x80072EFE is
  * WARNING: Exit Code = 0x80072EFE

  An interesting sidenote, if we try to navigate to update.microsoft.com in a browser, after a long break, we get a banner at the top of Microsoft, and three empty frames all display connection errors.

  We tried different DNS servers, we bypassed the firewall, we tried all possible parameters in the network configuration of PCs, we tried to define the parameters of Internet security at the lowest level possible.
  At this point, I'm fresh out of ideas.

  Any suggestions? Does anyone else have this problem?

  Hi branchranch!
  Step 1: http://support.microsoft.com/kb/971058
  Reset the Windows updates!

  > Step 2: reinstall Windows Update Agent 3.0
  > ===========================
  > 1. Please download the file from the following link:
  > Windows Vista (32-bit)
  > http://download.windowsupdate.com/v7/windowsupdate/redist/standalone/WindowsUpdateAgent30-x86.exe 
  > Windows Vista (64-bit)
  > http://download.windowsupdate.com/v7/windowsupdate/redist/standalone/WindowsUpdateAgent30-x64.exe 
  > 2. Save the file on the D: drive.
  > Note: Please select a drive where Windows Vista was not responsible because the
  > file cannot be launched directly from the root directory of the system.
  > 3. Click Start-> Run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce.
  > (without the quotes) and then press ENTER to install Windows Update
  > engine.
  > Note: there is a space between "D:\WindowsUpdateAgent30-x86.exe" and
  > "/ wuforce.
  > Now, let's run Windows Update again.

  Hope it would work.
  Bravo!

  Anurag Shukla
  Microsoft Certified Professional

• How can I fix error 1083 when you try to run BITS?

  I recently had to reinstall Windows XP on my system due to a virus or corruption of some sort to delete my file NTLDR.  Of course, this came back my system Windows XP SP 3 to SP 1a.  For SP aa to date back to SP 3, automatic updates should work.  Automatic Updates does not work well, because the Background Intelligent Transfer Service does not start.  He throws back Error 1083: the executable program that this service is configured to run in does not implement the service.

  This is the path to the executable, it tries to run C:\WINDOWS\System32\svchost.exe-k - netsvcs

  I have no idea how to fix this, I tried everything I could find on the Support web site.

  BoyCBronco,

  http://support.Microsoft.com/kb/910337>

  06/11 / 1105:05: 14 pm

• (Windows 2000) Error #0x80072EFE when you try to run Windows/Microsoft Update

  Hello world. I hope you don't mind offering support for a Windows 2000 based platform here, (I don't think Windows Update deferred much, if at all between the two operating systems)

  In any case, all of a sudden, I get error 0x80072EFE in Windows Update all of a sudden. I tried several troubleshooting steps, delete the folder C:\Windows\SoftwareDistribution to just reboot my computer. Nothing seems to work, and I hope someone has a step that will be.

  The last few lines (which seem to be relevant to the question at issue) are as follows:

  15:50:21:700 2 508 3e4 PT +++ PT: synchronization of updates of the server +++ 2011-01-22 15:50:21:700 508 3e4 PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, server URL = 15:50:21:888 https://www.update.microsoft.com/v6/ClientWebService/client.asmx 2011-01-22 508 3e4 Misc WARNING: send failed with hr = 80072efe. 2011-01-22 15:50:21:888 508 3e4 Misc WARNING: SendRequest failed with hr = 80072efe. Used proxy list: <(null)>list used workaround: <(null)>Auth schemes used: <> 2011-01-22 508 3e4 PT 15:50:21:888 + last proxy request failed with hr = 0x80072EFE, = 0 15:50:21:888 2011-01-22 508 HTTP status code 3e4 PT appellant provided credentials = 15:50:21:888 No. 2011-01-22 508 3e4 PT + Impersonate flags plus 0 3e4 508 15:50:21:888 2011-01-22 PT + Possible authorisation schemes used = 2011-01-22 15:50:21:888 508 3e4 PT WARNING : Methods failed, error is 0x80072EFE, SOAP client error = 5, error = 0 soap code of HTTP status code = 200 15:50:21:888 2011-01-22 508 3e4 PT WARNING: PTError: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: GetConfig_WithRecovery failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: RefreshConfig failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: RefreshPTState failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING : synchronization of updates: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: SyncServerUpdatesInternal failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 Agent * WARNING: could not synchronize, error = 0x80072EFE 2011-01-22 15:50:21:888 508 3e4 Agent * WARNING: exit code = 0x80072EFE

  If anyone can help, that would be great.

  See...

  Microsoft Update Catalog
  http://catalog.update.Microsoft.com/v7/site/home.aspx

• Receive the error message when you try to run the Installer "Install" is damaged and cannot be opened. You must eject the disk image.

  Help, please!

  I need a live chat

  Hello

  Please specify the application that you are installing.

  You can contact customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena